Say I have a report with 3 pages, each page has a different dataset and takes some processing time.
is it possible to give the user the option to just run the first page say if thats all they need?
Reduce the processing time of the report to only that that is necessary?
I created a report that uses a parameter to return a record per page basically, but it doesn't return all records that match the parameter. Thoughts?
Specifically, I have a table that tracks various sites my engineers are responsible for; each have about twelve. The problem is that every time I select an engineer I only see six pages (records). When I select two or three, then I see 12 or 18 pages, but still just six records per engineer.
Any help is greatly appreciated! Neil
I am very new to Reporting Services. When I set the report to landscape, either by setting width and height at 11 X 8.5 when in layout, or by setting landscape in page setup when I am in preview, a blank page prints in between each report page. I've checked the forum, and tried setting margins to 0, but have not had any success. I saw this response:
the body width plus margins should be less than the defined page width. but I'm not sure what settings are being referred to
Has anyone been able to solve this problem?
Thanks very much.
Sue
Hi,
I am using SSRS to generate a 4 page statement... So i have a plan whose no. of Participants is 3271 rows... so While we try to export them to a PDF we will have around 13084 pages... but we cannot export so many pages at one time (it craps out). so right now we are breaking it up by start part and stop part and creating a pdf..
Is there a way that SSRS can handle so many pages at one go without any problems... if so how ??
Regards
Karen
I have a filetable that contains a binary file. I need to do a selective read of the file stored in the file table. I can write a C# CLR function that will open the file, read n bytes the from a starting byte. Or I can write a SQL statement that reads the stream in the filetable into a VARBINARY variable using SUBSTRING beginning at the starting byte (offset from 1) for the same n bytes.
Both give me the same result. However, the SQL statement takes considerably longer to read. I know there is overhead in reading through SQL (interpreted language), but the difference in performance is substantial, and I can only attribute this performance degradation if SQL first tries to "load" the entire stream before it identifies the portion of the stream that it needs to read beginning at the starting byte offset.
I wonder if this is the case or if there is another option to read a stream from a filetable directly through SQL queries that is more efficient.
I has developed one report in SSRS in SSRS 2008 R2 and when I preview the report in report viewer in all pages Report Header is repeating, whereas when I export the same report to PDF strange for some pages header is missing.
When I searched in google for SSRS 2008 Microsoft agreed that it is a bug and they provided the hotfix. And this hotfix is not working for SSRS 2008 R2 as it is a higher edition but still I facing the same issue.
I need to create a simple dashboard report that will be displayed on a large screen.
My problem is that there can be potentially more records than the screen can display.
Based on how i size my report the report can be a single page with a scroll bar or mutliple pages.
My question is: Is there any way of automatically looping through pages or to automatically scroll down through the records in SSRS
If anyone has any experience of something like this or suggest a work around in SSRS could you please let me know
Thanks in advance
Brunzire
How Indexes are allocates on pages? And If a CREATE INDEX Statement Executed on a query Window, Query processor meets and executes these query. However it was meet, who decides to separate indexes onto pages? Storage Engine or Query Processor(Query Optimizer)? Does it work like UPDATE-Statements in Query Optimizer?
View 4 Replies View RelatedI in a table or partition, the first page is an IAM-Page if I'm not wrong, this page keeps track of the extents.
In the first extent to where the "first_iam_page" points to, the extent is a mixed extent, therefore the pages can be from different tables or partitions, correct? How does my IAM-Page map the right pages to the corresponding table? the following extents are all uniform of one table type, so I guess it doesnt matter then. But n, how does it keep track of which pages belong to which tables in the first extent?
My second question is, the first IAM-Page is obviously an IAM-Page, but there are also GAM , SGAM and PFS Page files... where are they stored? Because when I create a table and insert a big value(8000) into it, it reserves 16KB for that table, one for the IAM-page, and one for the first data-page. But where can I find the GAM,SGAM and PFS page files? or are they not page files, just some other structures?
We found an interesting 'issue' in one of our productive user database:
The output of msdb..suspect_pages table:
db_idfile_idpage_idevent_typeerror_countlast_update
16 2 22 32015.06.12 10:40
16 2 3 3 3 2015.06.12 10:40
16 2 6 3 3 2015.06.12 10:40
16 2 7 3 3 2015.06.12 10:40
16 2 1 3 3 2015.06.12 10:40
The problem is, that this user database only has one data file and file_id 2 is the log file.I understand that the event_type shows checksum and torn page error but in the log file? DBCC CHECKDB shows no errors and the database is part of an AOAG in synchronized state.We have log backups in every 15 minutes.
Currently we are using Custom Delivery Extension for SSRS 2008R2 We are planning to move it SSRS2012
My Question is: Whether we can use the same Code used for SSRS2008R2 to SSRS2012?
if not what code changes we should do?
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
I have a ssrs report having 2 tables in with 4 columns in each. When I go to export option in preview I can see all data coming in one excel sheet, But I am trying to get 2 tables in 2 different pages in Excel when I export.First page of excel comes with first table data with 4 columns and second page of excel comes with second table data with 4 columns .
View 2 Replies View RelatedHi. I have a SQL statement currently ending with "ORDER BY sc.TypeID, sc.ObjetID DESC"where the TypeID can be of value 1,2,3,4,5,6,7,8, 9 and 10. What I would like to achieve is to selectively order the datas by TypeID, meaning in this case that I want ALL the TypeID of value "1" to come first and then all the rest ("2" and higher) un-ordered. This is important that the rest remains unordered by their TypeID as I only want them to be ordered by their ID (ObjetID DESC). Is that possible? If yes how?Thank you.Francis
View 4 Replies View RelatedHello all,
Is there a way to do a selective restore? I need to create a dev db and the prod backup is 17 gig and I have a space crunch on the server. My idea was to restore the complete backup and subsequently shrink the db size after truncating data in tables which are not frequently used? Is that a good idea. Any help will be appreciated.
Thanks in advance!
Hi,
I need to be able to export from an existing database, all fields with a certain column id. I have been pointed in the direction of bcp, however I am having difficulty finding the right syntax.
Thanks,
D.
(P.S. MSSQL 2000 Server)
I have
table T2
id amount ss
1142
2151
3162
4172
table T3
idamount ss
131
142
251
362
472
481
491
I run
UPDATE t2, t3 SET t2.amount = t3.amount
WHERE t2.id1=t3.id and t3.ss=1;
T2 becomes
ID1amount ss
132
251
3162
492
but I want t2 to be
ID1amount ss
132
251
3162
4 82
how can I do that?
Thanks
Is it possible to use replication for inserts and updates only for some tables and inserts updates and deletes on others. I want to be able to delete data from the source database but not my replicated database. Does anyone know of a way to use replication to facilite this?
Thanks for any input you can provide.
I'm in the current mode of migration from WIn2k and I 'm trying to setup user where they are only allowed access to one table.
If I grant thenm read /write access to the db they can obviously see all of the db due to the size of the db I do not wish to go down the root of denying every table as there is over 100. Is there an easier way??
We have SCCM 2012 primary site and Remote SQL 2012 server. Due to hardening and password reset we are facing reporting issue.
while we Open the SRS report in SQL server and try to edit the Report (Report Builder) we are getting following error due to which we are unable to configure Reporting Service point in the SCCM 2012 server. We created the New Reporting server database still we are getting the below error.
I was trying to use the case statement in where clause so that the comparison (> , <, =) can be made depending upon the value of the local variable @fl.
PLease tell me how to do that. Or suggest me how can I make selective comparison (<,>,=) in where clause depending upon a local variable. Please note that I donot want to use if/else satement and write select statement everytime based on the local variable as in that case the code length will be huge. Please suggest me a coensized query.
SQL that I queried:
use pubs
go
declare @fl int
select fl = 3
select * from titles
where case fl when 1 then price > 90
when 2 then price < 90
when 3 then price = 90
end
The following error is given
Server: Msg 170, Level 15, State 1, Line 7
Line 7: Incorrect syntax near '>'.
Can I transfer data from one database to the other for only selected records
pls help
thanks
sunthar
HI,
Is it possible in SQL Server to restore Databases partially?
In the sense, I want to backup just 2 tables from a database & restore them, instead of having to take a backup of the entire database & restore the entire database.
One way to do would be to export data & then importing data for only those selective tables, but I dont want to do that, bcause that would probably take more time & can be error prone.
Thanks
Raman.
I need to 'copy' selective (filtered) rows from table 'A' to table 'B' on a regular basis, but only if they do not exist in table 'B'.
If rows get deleted from table 'A' they must remain table 'B'. If rows change in table 'A' (unlikely) they should be update in table 'B'
What feature of SQL should I be using?
- triggerering a stored procedure on Insert
- replication
- SSIS
Hi.
I am using Visual Studio 2005 professional and SQL Server 2005 Express Edition.
I am having a bit of an issue at the moment with my project. I have a large SQL server database (over 600,000 rows of data decoded from a text datafile and stored by my C# program) where I need to select a series of distinct rows.
I have a datacolumn of varchar(10) called UID which is assigned to every row in my database. It's not a unique code so it can happen several times. By selecting a specific UID code, I can narrow down my selection to a specific range of rows (which are incremental in order). This range will contain many names.
What I want to do is find a UID which will have one of two names. I have so far done this:
SELECT DISTINCT F1.UID FROM MyDataBase F1
INNER JOIN MyDataBase F2 ON
F1.LineIndex < F2.LineIndex AND
F1.UID = F2.UID AND
F1.Names IN (Bob', 'John', 'Peter', 'Sarah', 'Anne', 'Stewart', 'David', 'Alan', 'Linda') AND
F2.Names IN ('Bob', 'John', 'Peter', 'Sarah', 'Anne', 'Stewart', 'David', 'Alan', 'Linda')
This will return any UID which contains at least two of these names. The LineIndex ensures that the comparison doesn't happen on the same row of data (it's a column set to type int with IDENTITY(1,1) which is also my PRIMARY KEY). This is partially what I want, the selection of UID rows which will have at least two names from the list. Also, the same name will never appear twice in the same UID list.
Now, the problem I am facing is that I want a select a UID range with names in the order I have specified, so if I want a UID list where the names I want are Peter and Linda, I only want to return a set of UID rows where Peter appears earlier in the returned rows than Linda.
It is possible that other UIDs have the same names, but in reverse order, starting Linda, Alan, David etc...John, Bob. I would want to discard these entries.
Can anyone please give me any hints as to how I could get around this?
Thanks in advance,
Sean
I've got a report linking to a SSAS cube. It has 2 row groups Region and Country. The Country group is a subset of the Region group and works fine, it collapses and expands ok.
Now, due to a boss who doesn't like the way this looks, I have to find another way to display it. I was wondering if it is possible to have a report parameter that could be selected and the appropriate column grouping be displayed depending on the value.
i.e. User selects Report Parameter value 'Region' and the Region row group becomes visible, the Country group becomes invisible. The exact opposite happening if the user selects Country.
I can't find any obvious way to do this. Any ideas?
Rob
Hi,
I am trying to do selective updates for rows where a column matches a column in another table. I want to do something like this, only 'this' does not work, and nothing else I could think of (I tried joins also) worked. What am I missing? I hope this explanation makes sense.
UPDATE queryresultsmodel SET queryresultsmodel.tableforcedoutdate = getdate()
Where Exists (Select tablename from queryresultsmodel q inner join orphanul o on q.tablename = o.name)
Thanks for any help,
Judith
We have a Table that contains a schedule. The schedule has certain pieces of information that are required to be updated by certain members of the
organization, specifically Shift, Start Date, and Line. Each record also has a column for the customer that it is for.
The schedule has a Column, [CSR] which lists the name of the person who is responsible for updating it. Format of that is domainnamejohndoe
What we would like to do is block domainnamejohndoe from being able to update or insert on any of the records that he is not responsible for.
So if he attempts to change the shift for example, it denies the change and possible pops up an error indicating that the change was blocked because he is not the responsible party.
Input in this is through a query which views the table data in MS Access. It cannot be moved to a Form without some serious redesign, so I cannot put the block in there. I assumed that this could be blocked with a Trigger that checks the [CSR] column, matches it to the logged in user through the suser_sname(suser_sid()) and then either allows or denies the update.
So is this a viable idea, or should I explore the move to an input form and make the change there in MS Access via VBA.
At first we started with just an audit trail, but I started to think that the audit trail would be needed only for records that should be allowed to be changed and that we should deny changes to those who are not allowed to make them.
Below is the audit trail trigger, I figure that the change should occur somewhere within that first IF statement, or make the first IF the second, and the first should be the permission check.
At this point I am stuck as to how to block the updates. I tried using Deny but that was not working. Filtering the results by only showing the logged in user their records is not an option as they need visibility to the entire schedule.
This is for SQL 2000 SP4/Windows 2000 SP4
CREATE TRIGGER audit_mschange
ON dbo.T_PP_Table_2
FOR update AS
IF (UPDATE([Start Dt]) OR Update(shift) or Update
(comments)
or Update(status) or Update (line))
BEGIN
INSERT INTO T_MS_RB_AUDIT
(ord_no,line_tank_old,line_tank_new,shift_old,shif t_new,comments_old,comments_new,status_old,status_ new,trx_dt,trx_username,
start_dt_old,start_dt_new)
SELECT ins.[PP Ord No],
del.line,ins.line,
del.shift,ins.shift,
del.comments,ins.comments,
del.status, ins.status,
getdate(),
suser_sname(suser_sid()),
del.[Start Dt],
ins.[Start Dt]
FROM inserted ins, deleted del
WHERE ins.[PP Ord No]=del.[PP Ord No] AND
ins.autonumber=del.autonumber AND
(ins.status <> del.status OR ins.[Start Dt] <>
del.[Start Dt] or ins.status <> del.status
or ins.comments <> del.comments or ins.line <>
del.line )
END
Hi,
I have a problem that I would like help with.
I have to write an SQL Server 2000 stored procedure that returns rows from a table (a SELECT with an ORDER BY). A front end system calls the stored procedure and displays the returned rows. If there is more than one screen's worth of data (ie more than 20 rows returned from the table) then there is a requirement that the stored procedure only returns the rows for the screen ie, for screen 1 I need to return rows 1-20, for screen2 I need to return rows 21-40, screen 3 = rows 41-60.
The screen number will be passed into the stored procedure so I can work out what rows to return, the only problem is how can I tell SQL Server to only select the required rows (ie, say rows 21 to 40 from the returned rows). I can't see any arguments that allow selective rows to be returned (apart from TOP).
Any ideas??
Regards,
Chris
Dear netters,We are looking to build a SQL Server database that will be hooked up toa Web server (WebLogic or a .NET).The database will house data for multiple customers, and therequirement is to have no customer see other customer data. Web serverwill be responsible for authenticating users (ids and passwords will bemaintained there/possibly stored in the database, but will not beactual database logins) -- and establishing pooled connections to thedatabase, using some sort of a proxy login.Ideally, we do not want to have the database itself visible to "theworld", it should reside behind a firewall, and be accessible throughthe Web server, which will do all authentication and routing.We want to have either tables or views defined in such a way that:1. Users can only see their own data and NEVER can see anybody else's.2. Users' access to the database is logged (this includes updates aswell as queries).3. We would like to provide some sort of a reporting mechanism -- whereusers can form their own queries. So, something like a Crystal or anAccess front end, that users are typically familiar with... The problemis that this requires users having direct access to the database (?),and opens up tables (unless, there is a way to create parameterizedviews that will always restrict access to a subset of records).Any advice on how to best implement this is greatly appreciated.Thank you in advance!
View 4 Replies View RelatedI am beginning design for a project to maintain an on-line archive of historical data for a production database, and then truncate old, rarely-used data from the production database. I am considering a method whereby we (A) replicate data changes from the production database to an archive database and (B) truncate old data from the production database according to predetermined business rules.
I am trying to determine whether SQL Server merge or transactional replication can be used to accomplish the replication portion of this requirement.
Given this scenario, there are two types of modifications that are made to the production database: (1) application inserts, deletes and updates which should be replicated, and (2) truncation deletes (as described in "B", above) which should not be replicated.
My question is: Will I be able to control the replication process such that application deletes are replicated, but "truncation" deletes are not? Could static row filters somehow be used to accomplish this?
Hi all.
I have been banging my head against a brick wall with this for a couple of days now. I am wrighting a custom front end for one of our SQLServer DB's and need to run a select agains the DateTime Field. The field Format is [DD/MM/YYYY HH:MM:SS]. I am tring to get the select to pull all the records on a set date only (keeping the time available but not selecting against it) so that the brass can see at what time on a given day an action was performed. Problem is, the way the programing software works, I can only build the SQL using string information. I have tried CONVERT and CAST both ways (converting the date to varchar and converting the string to date and also converting them both at the same time). Everything that I have tried returns an empty data set when used with the WHERE LIKE criteria (oh yeah, I'm also using LIKE % wildecards to retrive all the times against a specific date) but does populate when no filter is applied.
This is where my SQL is at just now:
SELECT Files.FileID, Useres.UserName, FileStatusLog.StatusCode, FileStatusLog.StatusDate
FROM (Files INNER JOIN FileStatusLog ON Files.FileID = FileStatusLog.FileID) INNER JOIN Users ON FileStatusLog.UserID = Users.UserID
WHERE (((CONVERT(varchar(10), FileStatusLog.StatusDate,103) LIKE '%{variable}%'));
This also returns an emtpy data set when the LIKE is replaced with ='{exact date entry in format: DD/MM/YYYY}', but does return the full table when the WHERE is removed and also when the LIKE is set to just a bare '%' with no other filter values.
Because of the fact that the results are returned when LIKE '%' is used I am not even sure if it is the CONVERT that is causing the problem. I have even tried assigning the escape character manualy to '+' incase the / values of the date in the LIKE variable where escaping other characters. Needless to say this did not make life any better.
As you may have noticed already SQL is not exactly my strong suit, but no one else here even knows what it is, never mind what it's used for, so I got droped with the task. Also - The DB was created by a third party so I have no write permissions to the DB.
Any help with this would be greatly appreciated as it's gotten personal now
Thaks in advance for any assistance
In an SSRS database install along with a log shipping configuration towards a failover server, do we need to log ship the ReportServerTempDB DB also necessarily ?
View 2 Replies View Related