SQL Security :: Listener - Password Protection

May 27, 2015

Is it possible to password protect the listener for SQL Server - similar to Oracle?

View 2 Replies


ADVERTISEMENT

Question About Encryption And Password Protection

Aug 1, 2007

Howdy!

Couple quick questions:

1) How much does setting encryption cost in terms of speed of querying and cpu usage?
2) If encryption is not set, is the password "encrypted" when its sent with the initialization routine?

Thanks in advance!

View 3 Replies View Related

HELP Publishing A Site With Password Protection

Oct 29, 2006

I am new to Visual Web Developer 2005 Express.

I have created a web site containing a login control. It works great on my local machine, but when I copy it to the server, I get the following error when I try to login to the website:
Server Error in '/mrallensclass' Application.


An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.

Exception Details: System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Source Error:





An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:





[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734931
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) +820
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +628
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +170
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +130
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +28
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66
System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +496
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.SqlClient.SqlConnection.Open() +111
System.Web.DataAccess.SqlConnectionHolder.Open(HttpContext context, Boolean revertImpersonate) +84
System.Web.DataAccess.SqlConnectionHelper.GetConnection(String connectionString, Boolean revertImpersonation) +197
System.Web.Security.SqlMembershipProvider.GetPasswordWithFormat(String username, Boolean updateLastLoginActivityDate, Int32& status, String& password, Int32& passwordFormat, String& passwordSalt, Int32& failedPasswordAttemptCount, Int32& failedPasswordAnswerAttemptCount, Boolean& isApproved, DateTime& lastLoginDate, DateTime& lastActivityDate) +1121
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved, String& salt, Int32& passwordFormat) +105
System.Web.Security.SqlMembershipProvider.CheckPassword(String username, String password, Boolean updateLastLoginActivityDate, Boolean failIfNotApproved) +42
System.Web.Security.SqlMembershipProvider.ValidateUser(String username, String password) +83
System.Web.UI.WebControls.Login.OnAuthenticate(AuthenticateEventArgs e) +160
System.Web.UI.WebControls.Login.AttemptLogin() +105
System.Web.UI.WebControls.Login.OnBubbleEvent(Object source, EventArgs e) +99
System.Web.UI.Control.RaiseBubbleEvent(Object source, EventArgs args) +35
System.Web.UI.WebControls.Button.OnCommand(CommandEventArgs e) +115
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +163
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102




How would I correct this? It appears I need to change the setting for SQL Server 2005, but how do I do that? Thanks for your help.

View 1 Replies View Related

SQL Security :: How To Change SA Password

Apr 28, 2015

We are wanting to change the SA password on one of our Sql server 2012. My question is what are the implications? Will our agent jobs still run? SSIS packages still run under agent jobs? Is there a proper way/how to change SA password?

View 3 Replies View Related

A Strong SA Password Is Required For Security Reasons?

Apr 3, 2005

When I try to install SQL Server I get the follwing message when I click on the installation file :



 A strong SA password is required for security
reasons.


Please use SAPWD
switch to supply the same. Refer to readme


for more details.
Setup will now exit.

I've checked the readme but can't really find any info on how to fix this.
I don't know what password this SA password is nor how to change it.
Can anyone help me out?

View 6 Replies View Related

Algorithm To Encrypt The Password Into Security Directory

Mar 30, 2007

Hi,



I need know what algorithm to encrypt the password into Security Directory, if anybody know the name.



Thanks

View 1 Replies View Related

Local Security Settings - Maximum Password Age

Aug 15, 2007

We would like to use the SQL Server 2005 Express at our customers.
But now we have to meet the local security settings of the PC.
What is happening with the database users password (e.g. sa) when the "Maximum password age" in the "local security settings" for the password policy is to >0 (e.g. 30 days)?

Because this cause a frequently change of the passwords at the customers!!!!!!

View 1 Replies View Related

SQL Security :: System Administrator Password Reset

Aug 7, 2015

I have inherited a sql server and no one knows the SA password.  I cannot login with windows authentication even if the account is administrator of the machine.

View 4 Replies View Related

ODBC Security Processing Fails With 'Missing Password'

Nov 27, 2007

Hello,
I have a package that contains an ADO.NET connection mananger using an ODBC provider. There is a user name and password configured in the connection mananger. The connection is to a DB2 database.

I install the package on SSIS by setting the package ProtectionLevel to ServerStorage. I then save the package to the server using FileSave Copy of (package name), and save it to the server. I also set the protection level there to use server storage.

When I enable package configurations (SQL Server), the package fails when run by a Job. In the log, I get the following error message from the DataReader source that uses the connection manager:

******
System.Data.Odbc.OdbcException: ERROR [08001] [IBM][CLI Driver] SQL30082N Security processing failed with reason "3" ("PASSWORD MISSING"). SQLSTATE=08001 at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
****
The DataReader fails validation. When I disable package configurations, the Job executes the package without a problem. The server that the package runs on is 64 bit.

Why do I have this password problem when package configurations are enabled? The connection manager password is include in the package configurations.

Thank you for your help!

cdun2

View 8 Replies View Related

I Can't Login To Sqlserver With A Username And A Password But Works With NT Integrated Security !!

Nov 21, 2006

hi
i have created a username and a password in sqlserver 2000 from logins in Enterprise manager
and i permit him to the database i need to connect to ..
and i check all server roles for that user and i make sqlserver authentication for him with a password and then i goto the udl file to connect to that database using that user it fails !! and says

"login failed for that user 'myusername' reason not associated with a trusted sqlserver connection"

while i use NT integrated security it works well
so how can i connect to sqlserver using a username and a password

thanks in advance

View 3 Replies View Related

SQL Security :: What Is Alternative Of A Login Whose Password Goes Missing In Server 2008 R2

Jun 5, 2015

We  have a situation where SSRS reports are using Testuser account to run the SSRS reports for every user who has access to these reports.Now developers need the password for this login Testuser to proceed with their ssrs reports development, but its sort of mess that no one has password ever saved.So in case is there a way it can be retrieved or what should be an alternative if password cannot be retrieved for that login, as i believe changing the password will break the reports using the current password?

View 7 Replies View Related

DTS Protection

May 14, 2007

I'm trying to protect a package... using an owner password.
After I create an owner password and generate a dts command line from
DTSRunUI... it puts the package password in the string.
Basically if someone goes into the job and looks at this line they have the password to open the package...

DTSRun /S "svr-eqanalysis" /N "OrgExtract Rename" /M "password" /G "{2E2B6F07-0E56-4212-A894-B85A4EAA6C8C}" /W "0" /E

We can not remove the builtin administrators group from the machine
therefore system admins that want to poke around into our work can do so....
any suggestions......

thanks,

jonathan

View 3 Replies View Related

SQL Injection Protection (C#.NET)

Jun 28, 2006

Alright, so I have a basic search function to look through a field in my database which is decided by a query string. <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:DatabaseConnectionString %>"
SelectCommand="SELECT * FROM [Employee] WHERE ([Responsibilities] LIKE '%' + @Responsibilities + '%')"> <SelectParameters> <asp:QueryStringParameter Name="Responsibilities" QueryStringField="q" Type="String" /> </SelectParameters> </asp:SqlDataSource>  But, I'd really like to fix it using parameterized SQL queries, so that people aren't dropping my tables.  >_>I've been lookin' around for some code on how to do this in C#.NET, and most of them seem to look like this:  SqlConnection objConnection = new SqlConnection(_ConnectionString);objConnection.Open();SqlCommand objCommand = new SqlCommand( "SELECT * FROM User WHERE Name = @Name AND Password = @Password", objConnection);objCommand.Parameters.Add("@Name", NameTextBox.Text);objCommand.Parameters.Add("@Password", PasswordTextBox.Text);SqlDataReader objReader = objCommand.ExecuteReader(); My problem is that I don't know how really know how to go from my code to this code...  I mean, would I throw the latter in my backend code and call what it returns as a string, would I entirely replace my Datasource and do soemthin' with the code?  Any help, in the form of tutorials or just straight up tellin' me here, would be greatly appreciated.Thanks.  =D

View 3 Replies View Related

Protection Against Sql Injections

Mar 12, 2008

Hello all,
I'm using the following code to query my database...
    public static void InsertsComments(string Comments, string TagID, string UserName)    {        SqlCommand cmd = new SqlCommand("insert into TG_UserComments (Comments, Tag_ID, UserName) values (@Comments, @TagID, @UserName)", conn);        conn.Open();        cmd.Parameters.Add(new SqlParameter("@Comments", Comments));        cmd.Parameters.Add(new SqlParameter("@TagID", TagID));        cmd.Parameters.Add(new SqlParameter("@UserName", UserName));        cmd.ExecuteNonQuery();        conn.Close();
    }
My first question is, should I be making @Comments, @TagID, @UserName  a little more cryptic? Liks @CommDBQ23 or something? Does that make it safer?
Also, I'm going to use stored procs query the database, instead of how I'm doing it above. What would I need to change in the code to do this? Obviously I'd need to call a stored proc on the server, but can I still protect myself from sql injections with the above code? Is there anything else I should be doing to secure my application at this level?
Thanks!
Matty

View 9 Replies View Related

Stored Procedure Protection

Dec 6, 2004

Hi all,

I've developed a database driven web app in ASP.NET and ready to deploy to my customer. However, I'd like to know is there any way to encrypt / protect the source of my stored procedure and view in SQL Server? My web app make heavily use of SPROCs and DB Views and I don't want my client to view / alter it, compared with the web app, I can compile it into a .DLL file and remove all business logic, any similar thing in SQL world?

Thanks,

View 2 Replies View Related

Protection Level Not Working With SP2?

Sep 6, 2007

I'm having problems with ftp tasks in SSIS packages where protectionlevel=EncryptSensativeWithPassword. I've used this many times with no problems, but now that I've upgraded to 2005 SP2, It's not working as before.

I have a functioning SSIS package with an FTP download. It works fine on my workstation in the developement environment.

If I load it to the SQL server using Server Manager Studio under my account, I cannot run the package from the server when logged on as Administrator, nor can I schedule it to run under the SQLAgent account as a job. The error mesages are: Unable to connect to FTP server using "FTP Connection Manager" and "The password was not allowed". Obviously the password being sent to the ftp server is wrong, but it was right under developement. Further more, If I log into the server under my account the package runs fine!

If I load the package while logged in as administrator, I can only run the package as administrator. And of course, if I load the package as SQLagent, I can only run the package as SQLagent.

This is not how SSIS packages were operating before I upgraded! In fact I've reloaded some existing packages and found that they now have inherited this behavior (after they have been re-imported)

It looks to me like SSIS is using the EncryptSensativeWithUserKey option, instead of the EncryptSensativeWithPassword option. I'm not sure how to confirm this, short of using a packet sniffer to watch the ftp traffic.

I could switch to PackageConfigurations, but I was happy with the EncryptSensativeWithPassword option, which seemed appropriate for our operation.

Does anyone have any ideas what could be going on, or any suggestions to troubleshoot this? How can I tell if password is encrypted or not?

View 1 Replies View Related

Intellectual Property Protection

Mar 4, 2008



Hi All,

I would like to build a standard BI solution based on MS SQL2008 - integration services, analysis service and reoprting services.

This stardard BI solution can be distributed to multi customers - however I want to protect the source code so customers cant access the code.

I would like to be able to ecrypt or protect the solution - so the customer only get the "executable" but they cant access the soruce code. This is to protect my intellectual property.

Kindly advise if there are any way to achive this objective in SQL2008.

I did some research in SQL 2005 long time back - but I was unable to find resolution to protect the intellectual property.

I would be extremely pleased to get some good advise on how to protect IP in SQL 2008.

Thanks heaps, Thomas


View 3 Replies View Related

Recovery And Protection Plan

Nov 16, 2007



we are using sql server 2000 and it's on a remote system. One of the databases "Dbase1" went to Suspect mode. when we checked both the .mdf and .ldf files were missing from the Server. they were not there at all. Is there any way to recover the databse. To make it more secure what are the possibilities which we can use so that in future we should be able to restore our databse.

Thanks in advance
bab

View 5 Replies View Related

Usability Vs. Injection Protection

Nov 30, 2007

I have a question that I am sure that others have had to deal with in the past. I am writing business requirements for a web application that stores names, addresses, etc. I have hit a bit of a problem in design with allowing users to enter data they need, like the name O'Brien, and developers saying that allowing the single quote in a field could allow for an injection attack.
Developers want to strip out single quotes when they occur in the data, however the users are insistent that names and addresses that have single quotes in them are shown properly.

Is there any middle ground so that the system can be built to avoid an injection, but still allow data to be entered as intended.

View 4 Replies View Related

MMC Caused A General Protection Fault

Mar 23, 2000

I just installed SQL7.0 on a windows 98 machine. When I go to register a new database, I get the following message.
MMC caused a general protection fault

I have rebooted the machine, removed & reinstalled the application.

Help - what else

View 1 Replies View Related

Setting The Protection Level Of Packages

Aug 31, 2007

Hello everyone,

Can someone recommend me the most efficient protection level for SSIS
packages for my environment? I've been doing some reading on this lately, but can't really decide which one to use. The Rely on server storage for encryption (ServerStorage) seems interesting, but I'm unsure if that would work on my environment (Windows Authentication).

Currently I'm saving my packages to my dev server under "Encrypt sensitive data with user key" Protection level, but seems like the passwords for the FTP Connection for instance doesn't get saved when I deploy my package to the server.

Our environment consists of 2 dev servers + 2 prod servers with windows authentication, our SQL Agent Account is a domain account with local admin rights and sysadmin rights on the SQL Server and we try to use proxy accounts to access network resources instead of giving the agent access to everything.

This is what I found on MS's web site.
http://technet.microsoft.com/en-us/library/ms141747.aspx
http://technet.microsoft.com/en-us/library/ms141053.aspx

View 1 Replies View Related

SQl Agents And Package Protection Levels

Feb 20, 2008

All:
I am aware that I am raising an issue/question that has quite a number of ancestors in this forum. In reviewing some of the threads I still believe my situation has a bit of a twist; but that could just be me.

The process I used until a change I made recently worked just fine. A handful of my packages connect to our ERP system that only supports an ODBC connection. I set the Protection Level to the default, and then deploy the packages to the server. I use an agent to run the jobs that include these packages as steps. I have hardcoded the userID and password in the SQL jobs and so they have run fine.

In an effort to reduce maintenance on the packages I decided to run the packages from the File System instead of deploying them to the server. Now, the packages are not running as I have not changes the Protection Level yet. I did test running one of the packages using a Proxy I have created but that does not work either.

Based upon what I have read it appears that the first thing I need to do is change the Protection Level to DoNotSaveSensitive. How do I then pass the ID and password to the agent?

a. Create a confirguation file?
b. Create a package template?
c. Both of the above

To reiterate I do not wish to deploy the packages to the server; I prefer to run the packages from the File System. Further, I just have one box on which everything happens; there are no migration issues across servers.

Some insights from this group will be greatly appreciated.

Thank you!

View 8 Replies View Related

Package Protection Level Problem

Mar 11, 2008

Hello,
I have a package that contains a connection manager to a DB2 source. The password is configured within the connection mananger. The configuration string was included in the package configurations (SQL Server). The package is saved in VSS, and locally on my hard drive.

When a colleague attempts to open the package is Visual Studio (from VSS), He gets a message similar to the following.

Error 1 Error loading 'Geac_RK502.dtsx' : Failed to remove package protection with error 0x8009000B "Key not valid for use in specified state.". This occurs in the CPackage::LoadFromXML method. . C:Documents and SettingscdunnMy DocumentsVisual Studio 2005ProjectsGeac_RK502Geac_RK502Geac_RK502.dtsx 1 1

I'm very sure the package protection level was to encrypt sensitive data with user key. After he ran into this problem, I tried again to open the package from my computer (the machine that the package was created on) and now I get the same message. If I attempt to open the package anyway, I first get a message that there were errors in the package while it was being loaded, and that the package might be corrupt. After that message, I get one that states the document contains one or more extremely long lines of text....do you still want to open the file. If I click yes, the package opens read only with the following message:

Microsoft Visual Studio is unable to load this document. Failed to remove package protection with error 0x80090008. "Key not valid for use in specified state". This occurs iin the CPackage:LoadFromXML method.

I'm looking into more information about package protection. What can I do to avoid this problem, and what protection level should I be using so that my colleague can open the package? How can I correct the problem with this particular package, and have the package open?

Thank you for your help!

cdun2


View 6 Replies View Related

Deployment Problem With Protection Level

Feb 16, 2007

Hi all,

I have a problem while trying to deploy my packages that are configured in ProtectionLevel=EncryptSensitiveWithUserPassword

I use the Deployment Utility to deploy my packages. I set the password when deploying and the deplyment works fine. But I run the packages I have the following error : " Failed to decrypt an encrypted XML node because the password was not specified or not correct."

Did I miss something ?

View 5 Replies View Related

Access Protection On Deployed SQL Server

Jan 30, 2007



How can we control the accesses to a SQL Server that has been deployed on customer site? Basically, we do not want user to log in the database server, even as sa, except through our application.

Any recommendation?

Thanks,

Xiaodoudou

View 3 Replies View Related

SQL 2005 High Protection Failover Error

Oct 4, 2007

Hi

I am experiencing a problem while performing failover testing on 2005 Standard.
I have an application which uses an ODBC connection SQL Native Client with a failover partner.

The following is the series of events that cause the problem. I am using a domain admin account whilst testing which has a server login on both servers with the same privileges.

Server A (Principle)
Server B (Mirror)
**Application can connect**

Manual failover

Server A (Mirror)
Server B (Principle)
**Application can connect following a restart**

Server A is switched off

Server B (Principle, disconnected)
**Application continues working**

***restarting the application the following error occurs***

Connection Failed
SQLState 08001
SQL Server Error 53
[Microsoft][SQL Native Client]Named Pipes Provider: Could not open a connectionto SQL Server [53].
Connection failed:
SQLState: '08001'
SQL Server Error: 53
[Microsoft][SQL Native Client]An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Connection failed:
SQLState: 'S1T00'
SQL Server Error: 0
[Microsoft][SQL Native Client]Login timeout expired

Any help with this would be most appreciated

Peter

View 2 Replies View Related

SSIS Package Protection Level - DontSaveSensitive

Feb 1, 2008

For those of you who have had a hard time like me trying to figure out using Protection level for an SSIS package whilst deploying the package via the SQL Server Agent, here is a piece of advice:


Firstly the protection level is set by Default to - "EncryptSensitivewithUserKey".

The encryption actually takes place only if you have things like - passwords etc..

From my experience - using both - "EncryptSensitivewithUserKey" and "EncryptSensitivewithPassword" Security features have turned out to be unreliable when deploying through SQL Server Agent (even while using a Proxy account having all previliges).

This is it seems because of issues with the user who created the package being different from the user who deployed the package. (which is really ridiculous).


So I used the ProtectionLevel - "DontSaveSensitive" - which means it is not going to encrypt anything in the package and so ur sensitive information would be blank. You would have to then supply your password etc using a configuration XML file. - using SSIS "Package configuation" in your menu....


This has been the most reliable way of solving the whole problem with encryption.

bear in mind that you might want to put the XML file in a secure location to which no one else has access to.



Thanks
Pramod

View 1 Replies View Related

SQL 2012 :: SSIS Deployments - Protection Level Settings

Jun 23, 2014

I am currently designing a SSIS package that will migrate data from Syabse to Sql server. If these packages are to be deployed to file system (as this is one time run for migrating data) or to SSIS catalog or to Sql server.

Also, I have not changed the default protection level value in packages during design time and would like to know if I have to change it while handling the deployment using DTutil (yes, i need to deploy & execute using command line utilities).

Please note that I do not have access to PROD, UAT environments and deployment team will use my BAT file that is expected to deploy and execute the packages.

View 3 Replies View Related

SSIS Package Will Not Execute When DontSaveSensitive Protection Level Is Selected

Nov 9, 2006

Hi,

Can anyone explain to me why my ssis packages will not work when DontSaveSensitive protection level is selected? My package configurations are set as SQL server configuration type, and I have a table in a database that contains all the sensitive information (passwords and such). If I select "EncryptSensitiveWithUserKey" everything works, but I will be the only one able to execute the packages (not good, I need others to be able to execute them as well).

The error I'm getting tells me that the connection is not configured correctly or I may not have the right permissions on the connection.

My guess is that the DontSaveSensitive drops the passwords, but when I edit the data source and re-enter the password, it still does not work. Also, the database table I use that contains the sensitive data is not affected, all data remains.

What the fudge is going on here? I'm a newbie at this, can someone help me out?



View 7 Replies View Related

Sysem.Data.SqlServerCe.SyncStatus' Is Inaccessible Due To Its Protection Level

Jul 28, 2006

I made a merge replication and sucessfully connected with mobile device. Everything works fine. Because I wanna try asynchronous synchronization (which won't stop my application executing when subscribing) I read How to example from MSDN :
http://msdn2.microsoft.com/en-us/library/ms172391.aspx
But there is a problem with creating SyncStatus class object. I can't get into it and I can't create. maybe some reference will help? (I use reference to SQLServerCE). This error stoped my work for now, so I am waiting for some answers.

And if it's simple resolution for this problem - sorry. I just started programming applications for Mobile Devices.

Best regards. Maciek Wysocki

View 3 Replies View Related

EncryptSensitiveWithPassword Protection Option Cannot Be Used With DTexec Execution Of SSIS Packages

Nov 6, 2006

Our SSIS packages use the Web Service Task to call services to send email and write package failure data to a department wide database. These Web Service Calls are failing with HTTP 401 errors. It was caused by the passwords for the HTTP connections not being saved when the SSIS pkgs were saved to .dtsx files. I have tried saving the package with a password and the EncryptSensitiveWithPassword protection option. This password can be supplied when the package is called from another package or a package is executed in Visual Studio but cannot be supplied to DTexec to execute the package in a job. DTexec does have a /Password parameter but it is rejected if the package is loaded from a .dtsx file.
This appears to be a bug in DTexec. It only accepts the /Password parameter when the package is loaded with the /SQL option. Specifying /Password and /File is not supported.

Is this a known bug? Are there any workarounds?
Has anyone successfully called a Web Service from SSIS executed via DTexec?

View 1 Replies View Related

Data Access :: How To Recover Forgotten Password When Remember Password Option Checked

Jul 24, 2015

I have connected to Database using my credentials by checking remember password option. After few days I forgot my password. How can I recover the password as SQL remember it. Is there any way to recover my password instead of resetting it.

View 3 Replies View Related

SQL Server Agent Job Will Not Retain Package Password (encrypt Sensitive With Password)

Apr 1, 2008

I have a package protected by a password - I am already unhappy that to get it to use the configuration file to change connection strings for the production servers I have had to hardcode the password into the config file - very insecure!
However, the package now deploys correctly to the production server and will run from there OK, but NOT if scheduled as a SQL Server Agent Job. Thus is because however often I edit the command line to include the password after the DECRYPT switch (which it has prompted me for when I click on the command line tab), the Job Step will not retain it.
If I open it up after I have edited it and closed it, the password has disappeared.

I know that if I run dtexec plus the code in the Command Line tab (with the password), the package runs OK.

This is driving me insane!
I have read all the other posts and so I tried replacing the SSIS package step with a CmdExec step and pasting that code into there - then I get an OLEDB error..

The code I use is:
DTEXEC /SQL "ImportRateMonitoringTables" /SERVER servername /DECRYPT password /CONFIGFILE "D:Microsoft SQL ServerSSISDeploymentsRateMonitoringImportTasksDeploymentImportRateMonitoringTables_Production.dtsConfig" /MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING E

and I get

SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF

although the same code executes perfectly from a command prompt.

Please does anyone have any experience with a similar problem and if so, how did you get round it?

Thank you

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved