I am currently using a Microsoft Access (MDB) for my application. But I am looking at allowing other users on the network access the same database -- I know a Microsoft Access database is not the best solutuon for this enviroment.
I'd like to use SQL Server 2005 Express in this case. I am very fimilular with SQL Server 2000 Std/Ent editions. My question is, can I use the free SQL Server 2005 Express edition and allow remote users to connect to that database? Or is it supposed to only be used as a local database accessed by only the machine it's installed on?
HiIm trying to connect Visual Basic Express 2005 to a remote SQL Server Express 2005. I cant find how i can do that in VB.net Express.In Web developer there are no problem to connect to a remote SQL server but i cant find it in VB.net Express. The XP with the SQL server that i want to connect to is on the local network. Greatful for help!
I have SQL Server Express and VB 2005 Express installed in a Microsoft Windows XP Pro PC that is a terminal PC in our office Network. My Network Administrator has granted my terminal PC for Administrator Use. I tried to do the ADO.NET 2.0-VB 2005 programming in my terminal PC and I could not get a remote connection in the Window Form Application via Window Authorization. I do not know how to make this kind of remote connection in my Network. Please help and advise.
In my office computer network system (LAN), my Windows XP Pro PC has SQL Server Express and VB 2005 Express installed and I was granted to have the Administrator priviledge to access SQL Server Express. I tried to create a SQLCLR project in my terminal PC. 1) I tried to set up a remote connection to SQL Server Express in the following way: SQL Server EXpress => SQL Server Surface Area Configuration. In the Surface Area Configuration for Service and Connection - local, I clicked on Remote Connection of Database Engine, SQLEXPRESS and I had a "dot" on "Local and remote connections" and "Using TCP/IP only". Then I clicked on "Apply" and "OK" buttons. Then I went to restart my database engine in SQL Server Management. When I went to check SQL Server 2005 Surface Area Configuration, I saw the arrow is pointing to "Service", not to "Remote Connections"!!!??? Is it right/normal? Please comment on this matter and tell me how I can have "Remote Connecton" on after I selected it.
2) After I restarted the database engine (I guess!!), I executed the following project code (copied from a book) in my VB 2005 Express:
//////////////--Form9.vb---/////////////////
mports System.Data.SqlClient
Imports System.Data
Public Class Form9
Dim cnn1 As New SqlConnection
Private Sub Form5_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
'Compute top-level project folder and use it as a prefix for
'the primary data file
Dim int1 As Integer = InStr(My.Application.Info.DirectoryPath, "bin")
Dim strPath As String = Microsoft.VisualBasic.Left(My.Application.Info.DirectoryPath, int1 - 1)
Dim pdbfph As String = strPath & "northwnd.mdf"
Dim cst As String = "Data Source=.sqlexpress;" & _
"Integrated Security=SSPI;" & _
"AttachDBFileName=" & pdbfph
cnn1.ConnectionString = cst
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Catch ex As Microsoft.VisualBasic.FileIO.MalformedLineException
MsgBox("Line " & ex.Message & _
"is not valid and will be skipped.")
End Try
Loop
'Invoke the WriteToServer method fo the sqc1 SqlBulkCopy
'object to populate FromExcel table in the database with
'the FromExcel DataTable in the project
Try
cnn1.Open()
Using sqc1 As SqlBulkCopy = New SqlBulkCopy(cnn1)
sqc1.DestinationTableName = "dbo.FromExcel"
sqc1.WriteToServer(FromExcel)
End Using
Catch ex As Exception
MessageBox.Show(ex.Message)
Finally
cnn1.Close()
End Try
'Read the FromExcel table and display results in
'a message box
Dim strQuery As String = "SELECT * " & _
"FROM dbo.FromExcel "
Dim str1 As String = ""
Dim cmd1 As New SqlCommand(strQuery, cnn1)
cnn1.Open()
Dim rdr1 As SqlDataReader
rdr1 = cmd1.ExecuteReader()
Try
While rdr1.Read()
str1 += rdr1.GetString(0) & ", " & _
rdr1.GetString(1) & ", " & _
rdr1.GetSqlInt32(2).ToString & ControlChars.CrLf
End While
Finally
rdr1.Close()
cnn1.Close()
End Try
MessageBox.Show(str1, "FromExcel")
End Sub
End Class ////////////////////////////////////////////////////////////////////////////// I got the following error messages: SecurityException was unhandled Request for the permission of type 'System. Security. Permissions.FileIOPermission,mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'failed that is pointing to the code statement "Dim int1 As Integer = InStr (My.Application.Info.DirectoryPath, "bin")." Troubleshooting tips: Store application data in isolated storage. When deploying an Office solution, check to make sure you have fulfilled all necessary requirments. Use a certificate to obtain the required permission(s). If an assembly implementing the custom security references other assemblies, add the referenced assemblies to the full trust assembly list. Get general help for the exception.
I am a new Microsoft VS.NET Express user to do the SQL Server 2005 Express and VB 2005 Express programming by using the example of a tutorial book. Please help and tell me what is wrong in my SQLCLR sep-up and project coding and how to correct the problems.
Hi, I want to make a component library in Visual Basic.NET and connect to a remote Sql Server. When I create a new DataSet with the wizard, I can only connect to a .mdf file, but not to a Sql Server. With Visual Web Developer I can connect to a Sql server. What is the difference between these enviroments ? How can I do the same with Visual Basic.NET ? Thanks in advance.
I am trying to read the databases attached to the Sql Server 2005.... my code works fine for Sql Server 2000 but when i try it with Sql Server 2005 it gives me error that "Under Current Settings SQL Server 2005 does not allow remote connections".
Can anybody tell me where to change these settings... i tried my best to find it but :(....
Hi. Im trying to get a asp.net web aplication to write data to an sql express server located on another server. However when i try to connect with VS 2008 it says: "Named pipes provider, error 40: - Could not open a connection to SQL server". What do i need to do to get this to work. Do i have to set something in the sql server, and i assume i have to open some ports in my firewall aswell? Any help sugestions would be aprichiated
I've developed an asp.net 2.0 web app with vs 2005 and am using a SQL Server 2005 Express database. The app works fine locally, but after uploading to the remote web server the following error occures: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
How do I go about granting remote connections to SQL Server Express?
Does the web server have to have SQL Server Express installed in order to run apps that utilize SQL Server 2005 Express databases?
Do I grant access locally on my machine or do I have to be on the web server to grant remote connections?
I've been using .net 1.1 with access databases for the past couple of years, so this is all new to me.
I'm using SQL Server 2005 Express, Windows XP SP2. I connect using Windows authentication.
The data source that I'm trying to hit is on a remote server. It's an OpenLink ODBC Data source, and the server is in another location. SQL Server 2005 Express and the ODBC connection are both installed/configured locally on my machine.
I can connect to the remote server. The DSN exists as a System DSN.
The DSN has its own proprietary configuration utility, which I can configure so that the server name is XPLILLEYGSQLEXPRESS. The configuration utility doesn't care; I connect successfully one way or the other.
When I open Management Studio Express, I can see my database (CMS) listed under the "Databases" folder, but there's no tables in there, other than the system tables.
Hello. I have SQLEXPRESS 2005 installed on my laptop running Windows XP Home Edition with SP2. I have an application that can connect to the local instance with no problem. The other day, I tried to configure SQLEXPRESS 2005 for a remote connection from my desktop. To date, I have been unable to figure out how to do this.
I have followed the instructions posted at various locations on the internet, but to no avail. While I can configure SQLEXPRESS 2005 to allow TCP/IP connections, I have been unable to restart the server.
Here is the pertinent snippet from the error log:
<time> Server A self-generated certificate was successfully loaded for encryption. <time> Server Error: 26024, Severity: 16, State: 1. 2006-08-14 21:02:27.18 Server Server failed to listen on 'any' <ipv4> 0. Error: 0x277a. To proceed, notify your system administrator. <time> Server Error: 17182, Severity: 16, State: 1. <time> Server TDSSNIClient initialization failed with error 0x277a, status code 0xa. <time> Server Error: 17182, Severity: 16, State: 1. <time> Server TDSSNIClient initialization failed with error 0x277a, status code 0x1. <time> Server Error: 17826, Severity: 18, State: 3. <time> Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. <time> Server Error: 17120, Severity: 16, State: 1. <time> Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I have a feeling this problem is due to the way my system is configured, not necessarily how my SQLEXPRESS 2005 is configured. My laptop and desktop are connected via a wireless router, and both machines are running Norton Anti-Virus 2006. I've added sqlserver.exe and sqlbrowser.exe to the exceptions list for the Worm protection on the laptop, i.e., the server machine. There's not a setting at the router that would prevent the server from re-starting, is there?
Hi --- I would like a few users to be query tables, run (create ?) stored procedures, etc. on a SQL 2005 Workgroup database (the sql server is on a dedicated server)...
Will the Toolkit version (or any other version) support this?
I just got a Virtual Dedicated Server and installed SQL Server Express 2005 on it and while I was installing choose Mix Mode authentication and setup a sa password.....
I want to connect to that database remotely from my machine using VS 2005 or Management Studio....both are encountering the same problems.....
On the Virtual Dedicated machine if I install management studio I run has no problem....it asks me for the server name : somethingSQLEXPRESS then username and password and works fine...
The same thing I try to do remotely is not happy with ....I tried to give the IP address of the server same thing no luck.....
Can somebody tell me what I'm doing wrong and where....
Does anyone know if it's at all possible to install SQL Server Express 2005 over a Remote Desktop on a Windows XP machine.
I know there are problems running SQL over Remote Desktop, in that it won't start up a User Instance, but I wasn't sure if we can install over Remote Desktop.
If it's not possible, can anyone point me to an official document stating this fact?
I'm experiencing problems connecting remotely (through the Management Studio) to a named instance of SQL Server Express 2005.
After investigation I determined it was a firewall issue - turn off windows firewall and I can connect fine. I initially added ports 1433 and 1434 to windows firewall - still no joy. Then I added the binaries explicitly (sqlservr.exe and sqlbrowsr.exe - or whatever they are) - still no joy. So, I looked into the firewall log to see what was being dropped. I found that my IP was trying to connect via port 1047 (TCP)... I've searched for anything about this on google and cannot find any indication that the management studio should be using this port to connect.
If I add this port, the connection works fine. Has anyone else experienced this ? As there seems to be no way of modifying the management studio to connect via a specific port, I'm a bit concerned that something is just not right.
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
Can I connect to remote SQL 2005 server through SQL Server Management Studio Express? I always get a error code 18456 when I try to connect to SQL 2005 server through SQL Server Management Studio Express. I'm sure I enter correct username and password!
Hi,I've an account with a hosting service provider online for SQL Server database. I've downloaded SQL Server 2005 Express from ASP.Net. How can I use it to connect to my SQL Server Database which is sitting on remote server? The hosting provider gave me following things to connect to the remote database.Server NameDatabase NameUser NamePasswordRegards,A.K.R
I'M HAVING AN ISSUE, UNDERSTANDING, THE CONNECTION STRING. I WANT TO CONNECT TO AN INSTANCE OF SQLEXPRESS ON A REMOTE SERVER WITH A FIXED IP ADDRESS THE TCP PORT IS OPEN TO 1433 I OPENED THE PORT ON THE ROUTER AND THE WINDOWS 2003 FIREWALL
MY CODE IS AS FOLLOWS: S = "Provider=SQLNCLI;" S = S & "DATA SOURCE=44.66.777.888,1433SQLEXPRESS;" S = S & "INITIAL CATALOG=TESTDB;" S = S & "Persist Security Info=false;" S = S & "UID=TEST999;" S = S & "Pwd="TEST999888;" CnMgt.ConnectionString = S CnMgt.Open S
I'VE FOLLOWED THE STEPS OUTLINED IN ARTICLE 914277
CAN SOMEONE HELP? THANK YOU
PS. IF THE CLIENT IS LOCAL, I HAVE NO ISSUE OPENING THE DATABASE. I DO NEED TO OPEN THE DB FROM FROM CLIENTS.
Hi all, I am using Visual web developper 2005 with sql server express 2005 and i have also sql server management studio express. it's all free now . my web site is ready I didn't have problem to upload my site to my hoster. Now I want to upload all my tables and my stored procedure create locally with VWD express How can i do it ? NB: I know i can't design DB (create/modify tables and stored proc) with express edition thank's for your help
I have been unable to create a replication from an SQL Server 2005 standard edition database to remote SQL Server 2005 Express Edition. The remote express edition is on a Virtual Private Server we are leasing from a hosting company. The name of the remote DB is similar to vs572.si-vs572.com. I can connect to this with SQL server authentication through Management Studio and also with SSIS. But, I have been unable to create a push subscription (I have tried a test push subscription with the same publication to a local SQL Express server here in our office and this works fine).
Here is the error message: SQL Server Replication requires the actual server name to make a connection to the server. Connections through server alias, IP address, or any other alternate name are not supported. Specify the actual server name, 'VS572SQLEXPRESS'.
The hosting company had originally installed a shared SQL server which would not support replication. They then installed SQL Express edition and I was hoping this would allow us to run a replication.
I tried to connect to VS572SQLEXPRESS with out any luck. I check the remote connections, made sure replication was installed, etc., but no luck.
Trying to convert my access DB to SQL using 05 express using the upsizing wizard but receiving "SQL Server does not exist or access is denied" [microsoft][ODBC SQL Server Driver][Shared Memory] ConnectionOpen(connect())
I'm brand new to this. My site is currenty running cold fusion with MS Access on a remote hosting server that doesn't allow me to update the DB. They suggested migrating to SQL with CF so I can make changes without bring down the entire server.
I'm trying to make the conversion on my local machine running XP pro. I have just installed the .net framework and SQL server 2005 express. Do I need a different version?
- When I disable "allow remote connections to this server" from server properties>connection page, I can still remotely connect to the server from SSMS...so what is the impact of enable/disabling it?
- what is the impact of changing the remote query timeout (on the same page) from default value?
Can VB 2005 express able to connect remote SQL 2005 express database? I played with connection string many time and still could not success! Thanks all.
Hello! I run an application with a SQL Server 2005 Express edition.
I read under
Start menu --> all programs --> Microsoft SQL Server Express --> Configuration Tools --> SQL Server 2005 Surface Area Configuration --> Surface Area Configuration for Services and Connections --> Database Engine --> Remote Connections
That: "By default, SQL SERver 2005 Express, Evaluation and Developer editions allow local client connetctions only. Enterprise, Standard and Workgroup editions also listens for remote client connections over TCP/IP. Use the options below to change the protocols on which SQL Server listens for incoming client connections. TCP/UP is preferred over named pipes because it requeres fewer ports to be opened across the firewall."
Here I chose the option "Local and remote connections only, using TCP/IP only".
But still, does this mean that other users can't connect to my database since I'm running the Express edition?
If that's the case, could this be changed by using mySQL instead?
Is it hard to transfer a MS SQL Server .mdf database file into a new mySQL database?
I have installed SQL Server 2005 Express on a laptop for development purposes and would like to import some Access databases that I was using coupled to programs written in VB 6.
If using SQL Server 2000 I could use the management studio to automate the import but I can not find any way to do this in Management Studio Express. Would have thought that this would be the typical migration route - Access to Server Express
I just installed SQL Server Management studio express. I am trying to remotely connect to a SQL Server Express 2005 remotely. I was given the server name, user name and password, and used SQL Server authentication. It connected fine, and I was able to get at the intended database.
I then went to ODBC data sources to add this SQL server using SQL authentication. I entered the server, user and password, and I got a nebulous "could not connect" error. I thought is may be because I still was connected in SQL Server Management studio express, so I closed it and tried again with the same error. I then reopened SQL Server Management studio express and tried to reconnect, and got the same nebulous error, and have not been able to connect since.
I tried rebooting and reinstalling SQL Server Management studio express, but had the same result. Does anyone have any idea what I may have done and how to undo?
I've installed SQL 2005 Express, enabled local and Remote connections but my client app cannot connect to the SQL server. I'm getting access denied or SQL does not exists. Any idea's on how to resolve this issue?
I upgraded an Access 2003 database to SQL Server 2005 Express with the upsize wizard- worked great! Have a field that needs to be a hyperlink data type. There is no datatype in SQL that is hyperlink. Even if it were a text field, possibly inserting a hyperlink would work, but the insert hyplink in Access is unavailable, because the datasource is sql, maybe. I have a command button that ties to this function which won't work, obviously since it is not available. I need this field, it points to a file containing data that is being imported into the database. Huge piece of the database functionality. Making it easy for the user to find the file and using the vba to convert the data.
Saw the option of jump to url, but I don't think that will work? couldn't find the exact syntax either.
A question regarding SQL Server 2005 Express edition. Is it possible to export Access databases into SQL databases without using programming (e.g. using SQL and programming languages)?
I understand you can do this with DTS, but the Express edition seems not have DTS.
