SQL Server 2005 Upgrade Advisor

May 8, 2008

Hi All,

Is there a way to print out reports of the errors and warnings created by the
SQL Server 2005 upgrade advisor?

View 1 Replies


ADVERTISEMENT

SQL SErver 2005 Upgrade Advisor

Oct 31, 2007

Team,

Got a question about one of the results on the upgrade advisor report.


When to Fix: Before
Description: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Object: SVCACCTREQ

It is looking like some type of permission problem but I cannot find anything about this specific issue.

I am running the advisor from my local machine, on which I am a local administrator, against a remote server where I am just a typical user.

Is this an error that would be corrected if I were to run the upgrade advisor logged into the server as a local administrator? I'm trying to determine whether there is anything that needs to be done with this issue.

Thanks.
Richard

View 3 Replies View Related

Error Installing SQL Server 2005 Upgrade Advisor

Dec 30, 2005

I'm getting a Windows Installer error when attempting to run the Upgrade Advisor setup package (SQLUASetup.exe). The error message reads:

"This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service."

The machine is running Windows 2000 sp4. Both the .net framework v2 and Windows Installer 3.0 have been installed.

Any suggestions?

 

View 4 Replies View Related

Minimum Permissions Required By The SQL Server 2005 Upgrade Advisor

Feb 15, 2008

Hi all,

What are the minimum permissions required by the SQL Server 2005 Upgrade Advisor (UA)? I could not find it in the documentation.

Obviously being a local Administrators Windows group and a member of sysadmin SQL Server role will do the trick.

But will being a member of only the sysadmin SQL Server role be enough? I know that the UA does want to read the registry.

Running it under just sysadmin generates the following type of errors:










Database Server
PreUpgrade
Requested registry access is not allowed.
WINSOCKPROXY

Database Server
PreUpgrade
Requested registry access is not allowed.
FTUNSIGNEDCOMPONENTS

Database Server
PreUpgrade
Requested registry access is not allowed.
NETPROTOCOL

Database Server
PreUpgrade
Requested registry access is not allowed.
FTMULTIPLEINSTANCES

Database Server
PreUpgrade
Requested registry access is not allowed.
INVALIDNAMEDPIPE

Database Server
PreUpgrade
Requested registry access is not allowed.
FTCOMPONENTREG

Database Server
PreUpgrade
Requested registry access is not allowed.
FTACCTPASS


The issue then is whether these are significant or not. If the UA is only reading the registry to determine if SSAS, DTS, etc is installed then that is not important. But if it is affecting the end result because it cannot read critical information from the registry that is another matter.

TIA

View 1 Replies View Related

SQL 2005 SP1 Upgrade Error For Upgrade Advisor

Jan 19, 2007

Hi,



We are performing a SQL 2005 SP1 upgrade from SQL 2000 on our Windows 2003 SP1 Standard Edition.

When we run the upgrade, we got a error "Upgrade Advisor Return -1" as a pop-up window.

When we run the Upgrade Advisor separately, we get this error :



===================================

Common Language Runtime detected an invalid program.

===================================

Common Language Runtime detected an invalid program. (System.Xml)

------------------------------
Program Location:

at System.Xml.Schema.SchemaInfo..ctor()
at System.Xml.Schema.XmlSchemaSet..ctor(XmlNameTable nameTable)
at System.Xml.XmlReaderSettings.get_Schemas()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReportController.LoadAndValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAReport.ValidateDataFile()
at Microsoft.SqlServer.UpgradeAdvisor.ReportViewer.UAIssueReport.Refresh()
at Microsoft.SqlServer.UpgradeAdvisor.ReportPanel.OpenReport(String reportFile)



We are in a lost for solutions. We do hope to hear from anyone asap...

Greatly appreciated for any kind assistance.



Thanks.

View 1 Replies View Related

Can Not Run SQL Server 2005 Upgrade Advisor On Server That Does Not Use The Standard Port

Jun 7, 2007

I tried creating an alias to the server to get it to connect to analyze the server but it will not recognize the SQL 2000 server as a valid server to analyze. I can use the alias to connect in EM or SSMS. Any ideas? The server is not clustered and is at SP4. I've connected to several others in my environment but this one is causing me grief!



Thanks,

Linda

View 1 Replies View Related

SQL 2005 Upgrade Advisor Report

Dec 27, 2007



In my SQL 2005 Upgrade advisor report I am getting following description and its importance is critical. I am unable to figure out this.

Item has already been added. Key in dictionary:'mydatabase.LightQueryTool' key being added 'mydatabase.LightQueryTool'

View 1 Replies View Related

SQL 2005 - Upgrade Advisor Error - Unable To Connect

Apr 15, 2006

Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.)

View 2 Replies View Related

Microsoft SQL Server Upgrade Advisor

Feb 5, 2008

Hi there

Is there any issues to point the Microsoft SQL Server Upgrade Advisor to the SQL2K production environment during normal hours? Any issues that you know of? Or anything that I should to know about this tools?

Thanks

View 2 Replies View Related

Upgrade Advisor Against A SQL 7 Cluster Server

Aug 17, 2006

Hi all,
i am in the process of upgrading my clustered SQL 7 to a new cluster with SQL 2005.

I tried to run Upgrade advisor against the SQL 7 cluster but i am not able to make it work.
I checked prerequisites on my client machine, checked if my account has administrator privileges on thew cluster and everything seem fine.
I tried to run UA using node name, virtual server name (as suggested in the help), IP address (both node and virtual server ones) and even SQL 7 instance name (!) with no result.

Are there any issue about upgrade advisor against a SQL 7 cluster ? or am I missing something about Upgrade advisor??

thanks for your help

View 1 Replies View Related

Getting Error While Running Upgrade Advisor On Remote Virtual Server

Jul 31, 2007

Hi,

While connecting remote SQL server through upgrade advisor I am getting the below errors:

Error: Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

Pls let me know if anyone has faced this issue and know how to fix.


Thanks in advance

-Shriniwas

View 1 Replies View Related

SQL Server Admin 2014 :: Ensuring Upgrade Advisor Is Running Properly?

Oct 30, 2015

I have a SQL Server 2008 instance that is running on "LiveServer" our production database (ProdDB) - and we need to upgrade to 2014. In order to do some upgrade testing, I spun up a VM with the same version of SQL server on the test VM (TestServer), did a backup of the production DB from the live server, and restored it to TestServer under a different name (ProdDBUA).

I then installed SQL2014 Upgrade advisor onto TestServer, and ran it, checking all the boxes (reporting services etc..) and it all came back clean - no issues whatsoever - not a single warning even. I'm under the impression that stored procs/functions etc... all reside within the DB, so a backup will include those. Is that correct?

The problem is, I know I have stored Procs, functions and views that use deprecated joins in that LiveServer.ProdDB. What do I need to do/configure/check in order to make sure that the Upgrade Advisor is actually checking through all that T-SQL that has deprecated code? I want to have a list to give to my report writers of procs/functions/views that need to be rewritten prior to the upgrade going live.

If there is a modification that needs to be run on the TestServer.ProdDBUA, a cursor to change the path etc. DB is running in Compatibility mode 90.

View 4 Replies View Related

Upgrade Advisor Could Not Detect SQL Server Components On The Server

Oct 6, 2006



Hi I run Upgrade Advisor and i get this error

===================================

Upgrade Advisor could not detect SQL Server components on the server.

===================================

The network path was not found.
(mscorlib)

------------------------------
Program Location:

at Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
at Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.GetClusterInfo()
at Microsoft.SqlServer.UpgradeAdvisor.SqlDetection.DetectComponents()
at Microsoft.SqlServer.UpgradeAdvisor.FormDetectComponents.Detect()



Server

Windows 2000 SP4

SQL 2000 Standard

.Net 1 & .Net 2 installed

All windows updated installed

Anyone with any ideas

Thanks in advanced

Nick


View 3 Replies View Related

Upgrade Advisor Post-upgrade

Dec 6, 2006

Greetings,

I have a client whose DBA upgraded their SQL 2000 database to SQL 2005. They still have it running in 8.0 compatibility mode, for various reasons, and would like me to help them develop a migration strategy to get them to full 9.0 compatibility.

My question is: can I run the Upgrade Advisor on a SQL 2005 engine database running in 8.0 compatibility mode and get anything useful? I already know there will be some issues with existing DTS packages but it would be nice to catch any other issues in advance.

I know that the Upgrade Advisor was run before the upgrade took place but to my knowledge the report was not saved and none of the recommendations were followed.



Any help would be greatly appreciated.

Cheers,

Lon

View 1 Replies View Related

Error On Upgrade Advisor

Jun 8, 2006

Hi there,

I tried to run Upgrade Advisor on two SQL 2000 servers, but the wizard keeps failing when it reaches 22% while analyzing the Database Engine.

I downloaded the latest version, but still receive the same error...

Error: "SQL BPA command line has encountered a problem and needs to close"

Both servers are Windows 2003 Enterprise Edition SP1 with SQL 2000 Enterprise Edition SP4.

Does anyone have an idea what I can do to fix this problem.

Thanks!!

View 38 Replies View Related

Upgrade Advisor Issue

Oct 12, 2007

Hi,

I have a SQL server 2000 in development. it is running as an instance (servernameinstancename) with a TCP port configured. I can not connect to this server thru upgrade advisor wizard as well as by using command line utility. Can some help me understand how can I connect to sql server 2000 name instance and run upgrade advisor on it.

Here are the steps I have taken:

created config.xml as below:


<Configuration>
<Server>servername</Server>
<Instance>D15</Instance>
<Components>
<SQLServer>
<Databases>
<Database>Testdb</Database>
</Databases>
</SQLServer>
</Components>
</Configuration>
It does not allow me to put port number and can not connect to server.

I get following error:

Unable to connect to server. Reason: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)

But it is not a sql server 2005 system and I can connect to this server via SSMS or SQL EM.


Thanks
Rgupta

View 2 Replies View Related

Can't Connect With Upgrade Advisor

Sep 13, 2006

I'm having trouble connecting the Upgrade Advisor to a SQL 2000 box at a client. Here's the setup:

1> I'm running UA on a Virtual PC image

2> I can run UA against other SQL machines on the same domain

3> I can register and administer the SQL server I'm having trouble with in Enterprise Manager

4> I have SA rights on the SQL box I'm having trouble with.

5> The problem is when entering the server name and clicking "detect," it errors out with "The network path not found (mscorlib)."

6> I've tried server name, FQDN and IP address.

This is a fairly convoluted layout, so there could be a firewall issue that I'm not aware of (but I don't think so).

Any help would be appreciated!

Bob

View 2 Replies View Related

SS2005 Upgrade Advisor

May 29, 2008

I'm trying to migrate/upgrade some databases from 2000 to 2005 and am having a problem. Apparently, the Upgrade Advisor can't analyze a SS2000 database if it is in a named instance. (see below)


This problem occurs because the SQL Server 2005 Upgrade Advisor cannot connect to the named instance of SQL Server 2000.

The SQL Server 2005 Upgrade Advisor uses information that the SQL Server Browser service returns when the SQL Server 2005 Upgrade Advisor tries to connect to an instance of SQL Server 2000. However, the SQL Server Browser service cannot return the correct information about the connection request. Therefore, the connection fails.

http://support.microsoft.com/kb/908454

Doesn't this make the UA tool useless for named instances on SS2000? Are there any plans to correct this issue? Or, is there a workaround available?

Keith

View 7 Replies View Related

Upgrade Advisor Report

May 20, 2008

I ran Upgrade Advisor on a SQL 2000 server and I received warnings and errors for DTS packages and MetaData Services. Since there are no DTS packages and I don't see anything when I click on Meta Data Services Package, but I get an error when I click on Meta Data...

"An error occurred while trying to access the database information. The msdb database could not be opened."

Why is this error occurring when there are no DTS packages?

View 5 Replies View Related

Upgrade Advisor Issue Not Clear

Jun 15, 2006

I'm testing the upgrade from SQL Server 2000 to SQL Server 2005 and
first of all I ran the Upgrade Advisor.
I received one issue that I cannot understand. The desctiption is:


Unexpected szVal value from parser - expected sp:name but received
sp:args-


There is also indicated FTCATALOGNAMERESTRICTION and I suppose this is
the "affected object" even if I cannot find it to the DB!


Do you have any hint for me?
There is really few documentation on the net about using the Upgrade
Advisor.


Thanks in advance,
emanuele

View 1 Replies View Related

Upgrade Advisor Error I Don't Understand

Jan 11, 2007

I'm carrying out an investigation into how much effort will be involved in upgrading our database from SQL Server 7.0 to SQL Server 2005. I've downloaded the Upgrade Advisor and run in against a copy of our production database. Most of the issues are trivial and I understand how to resolve them apart form one (to me) meaningless one:


When to Fix : Before

Description : Class Not Registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))

Details : SVCACCTREQ

That's all the information it gives, except for a "This issue is resolved" checkbox. Anyone got any idea what the problem is, or how I go about tracking down the cause?

I'm running the analysis tool from a W2K Professional Client, connecting to SQL Server 7.0 running on an NT4 Server using Windows authentication. The account I'm connecting with is a member of the System Administrator group in SQL Server and is a local admin on the client, and a member of the Users group on the server.

Any pointers appreciated.

Cheers,

Bill

View 2 Replies View Related

Access Is Denied In Upgrade Advisor

May 24, 2006

Hi all,

I have run the SQL Server 2005 Upgrade Advisor against a default instance of SQL Server 2000 server running on Windows Server 2003.

One thing I need to fix before I upgrade is:

Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)

SVCACCTREQ

I'm not sure what this means or what I need to do before I can upgrade.

Does anyone have a clue on this one.

Thanks,

David

View 8 Replies View Related

How To Slove Upgrade Advisor Issues

Nov 18, 2007

Hi All,
when i am migrating pckg dts to ssis before that i am checking that pckg with upgrad advisor. upgrad advisor report shows me following things i need to upgrade.
1. SQL Server 2000 Meta Data Services Packages are not support::Existing meta data services packages should be moved to sql server storage or structured storage files before you upgrade sql server 2005 does not install support for sql server 2000 meta data services therfore package migratio wizar willbe unable to access meta data services packages after upgrade in the absence of the SQL server 2000 client tool.

2.SQL server 2000 DTS designer components are required to edit DTS Packages

pl.provide solution for above error msg

Thx,

View 2 Replies View Related

Upgrade Advisor + DTS + Named Instances

Jun 4, 2007

Hello,
I am after a bit of advice about running the Upgrade Advisor tool on a server that has more than 1 SQL Server instance. My particular focus is DTS on each server.
I tried running the tool, setting up an XML file per SQL Server (including named instances). An example of the XML is I used is included below):
<Configuration> <Server>SQL01</Server> <Instance>INSTANCE01</Instance> <Components> <DataTransformationServices /> </Components></Configuration>

When the tool runs, folders get created for the relevant named instances, but the DTS runs against the default instance only. In other words, the default instance DTS.xml file gets overwritten several times.
Does anyone know if the Upgrade Advisor tool can handle multiple SQL instances on the same server, particularly in realtion to DTS?
I had thought this might have been a limitation as the options in the Report Viewer are "Server" then "Instance or Component", when I am really after "Server", "Instance" AND "Component".

Any suggestions welcome.

Thanks in advance, Paul

View 1 Replies View Related

Upgrade Advisor For Compatability Level.

Jan 23, 2008

Is there any way to run upgrade advisor against a database the is on a sql 2005 server but set to 80 compatability level?

Or is there another tool to do this?

View 6 Replies View Related

Running Upgrade Advisor Against Production

Nov 30, 2006

Is it safe to run the Upgrade Advisor against production servers?

Thanks in advance!

View 1 Replies View Related

Upgrade Advisor / Migration Wizard

Nov 28, 2007

I ran the upgrade advisor on a SQL Server 2000 DTS package and received the following:

Upgrade Function: Replace functionality of complex Data Transformation task encapsulated in Execute DTS 2000 Package task after package migration
Message: The SQL Server 2005 Integration Services (SSIS) Package Migration Wizard does not migrate complex Data Transformation tasks in SQL Server 2000 Data Transformation Services (DTS) packages. The migrated package will contain encapsulated DTS functionality that must eventually be removed or redesigned.

When I run the Migration Wizard, it runs successfully, with no encapsulated DTS fuctionality that I can see. As far as I can tell from comparing the two, it looks like it migrated successfully without any help from me! I'm not familiar with the business logic of the DTS package, so am worried that I'm missing something.

Is it possible for the Upgrade advisor to be wrong?
Are there any advanced or random screens that I can check for something that might not have migrated correctly?


Thanks for any insight that you can provide!
Jessica

View 5 Replies View Related

SQL2005 Upgrade Advisor's Warning

Nov 6, 2006

hi there

I have remote SQL2000 server and have client of it on my system.

As I try to check upgrade issues with SQL2005 Upgrade advisor by writing server name and pressing DETECT button,it gives me error--"Requested registry access is not allowed.(mscorlib)".

Could you tell me what are the access i will need to run Sql 2005 upgrade on remote server.





View 9 Replies View Related

Upgrade Advisor:Timeout Expired. The Timeout Period Elapsed Prior To Completion Of The Operation Or The Server Is Not Responding

Jul 2, 2007

Hi,

I am getting the following error when running SQL Server 2005 Upgrade Advisor on a test database of 300Gb aprox. After a long wait we got the following error:



Database Server,"PreUpgrade","Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.","OLDSYSTEMTABLES",



After that error we got several similar errors of "timeout expired" pointing to FTCATALOGNAMERESTRICTION, and others.



I found the same problem reported in other forums and recommended to run the UA database per database, but we are running the Upgrade Advisor against only one database in periods of low activity.



We cannot advance the upgrade to SQL Server 2005 on other databases due to this error. I would appreciate some clues or suggestions.



Thanks,

Juan

View 1 Replies View Related

SQL 2012 :: Upgrade Advisor - The Network Path Was Not Found

Jul 2, 2013

We installed the SQL Server 2012 GUI tools, including "Upgrade Advisor," on a new virtual machine. We can connect to the old SQL Server 2008 R2 clustered databases just fine over port 1433 using SQL Server Management Studio 2012, but Upgrade Advisor is a mixed bag. Here are the steps we are taking:

- Click on "Start," "All Programs," "Microsoft SQL Server 2012," "SQL Server 2012 Upgrade Advisor"

- Fill in the server name with a valid SQL Server Network Name

- Select "SQL Server" as the only component to be analyzed

- Fill in the instance name with a valid named instance

- Use Windows Authentication (the default)

- The "SQL Server Parameters" window displays valid database names, meaning that we have a successful connection to the desired SQL Server instance at this point

- Leave all of the databased selected (the default)

- Click the "Run" button

- The "Upgrade Advisor Progress" window spins for a while and eventually generates the following error:

TITLE: mscorlib
------------------------------
The network path was not found.
------------------------------
BUTTONS:
OK
------------------------------

Why would Upgrade Advisor be able to display the database names after making a successful connection only to fail later saying that it cannot find the network path?

View 4 Replies View Related

SQL Tools :: Upgrade Advisor Not Showing Warning For Deprecated Code?

Nov 11, 2015

I am planning to Upgrade from sql server 2008 R2 to SQL 2014.

I ran Upgrade advisor 2014 on the database which i want to upgrade and the result was clean with no issues spotted.

But when i run profiler on 2008 R2 to find events like deprecation final support i see many of those in the DB which are not captured by Upgrade Advisor 2014.

Eg: Deprecation Final support in Profiler trace:SET ROWCOUNT will be removed in a future version of SQL Server.

This was not caught in Ugrade Advisor.If 2014 upgrade Advisor didn't show any issues on a database, Am i good to go with code like SP's, Triggers, Functions etc?

View 3 Replies View Related

SQL 2005 Migration Advisor

Nov 16, 2007



Not that I am expecting anything to be done about this, but why did MS make the SQL 2005 Upgrade Advisor so unfriendly and slow for people that are doing a simple migration? Our organization is migrating everything from SQL 2000 to SQL 2005 one database at a time, and I have the responsibility of running the advisor and checking if there are any MIGRATION ISSUES. We are not concerned with the DTS Packages at this time, because we are doing a side-by-side migration. I do not need the Advisor to check the DTS packages (and even though I tell the Advisor not to, it still does), nor do I need it to check the SQL Server for Upgrade Issues every time I need to check a different database. The worst problem is that I cannot save the reports in a custom location for each database and strip out the useless information that I do not require.

Why can't we get a MIGRATION WIZARD that ONLY checks the Database for problems when doing a side-by-side migration? This would probably save me 1-3 minutes per database and we have about well over the 400 mark with production databases.

Thanks for any answers you can provide. Thanks!!

James Kerr
Associate Database Engineer

View 7 Replies View Related

Upgrade From SQL Server 2005 Eval Copy To SQL Server 2005 Standard Edition

Jul 23, 2007



I have a SQL Server 2005 evaluation that has already been installed and setup on a server. I believe it originally had a 180 day eval. There have been numerous databases and users added as well as maintenance plan created...



The eval was put on the machine as an interim solution while waiting for paper work and order processiing things to happen. All the paperwork and ordering... have been completed and I now have the real SQL Server 2005 Standard Edition license key ....



I am very new to SQL Server and need to determine ...

1. Can I update the eval copy to become permanently licensed?

2. Would I want to upgrade the eval to permanent? Will I lose any capabilities by keeping the current eval setup?



If it is reasonable to keep the eval setup

3. How do I go about entering the license key to make it permanent?



If it is necessary to install the new Standard Edition...

4. How do I install it while maintaining the already defined databases, data, users, maintenance plan...



Thanks in advance for any and all help.



Chris

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved