SQL Server 2008 :: Installing Reporting Services On Failover Cluster
Jun 16, 2015
if it is supported to install Reporting Services on both the active and passive nodes in an SQL Server Failover Cluster and use the non-active node as a warm standby?We have relatively simple reporting requirements so the idea would be that if Node 1 went down, we could just repoint our users are Node 2 temporarily. Both reporting services instances would be configured to target the same SSRS database running on the SQL Cluster.
View 2 Replies
ADVERTISEMENT
Jun 3, 2008
Hi,
I've a problem with my failover cluster. It's a two node cluster and if the active node fails, the second one overtake the database and everything is fine. But only the reporting service doesn't start on the second node. The service is off. All other ones are starting correctly. Is there to configure something special to the Reporting Services?
Regards
Sascha
View 3 Replies
View Related
Mar 9, 2011
IF you need to change the IP Address of a SQL Server Failover Cluster instance, here is the steps:
1. Open up Failover Cluster manager.
2. Expand the MS Cluster Instance that your SQL Cluster instance resides on.
3. Expand Services and applications.
4. Select the SQL Server Service.
5. In the main window pane (Middle Screen), you should see your SQL Server Cluster name, expand the plus to the left of it.
6. Under your SQL Server Cluster name, you should now see an 'IP address' section, right click on it and go to properties.
7. In the properties pane, you can change your IP address by entering a static IP.....or assigning a DHCP enabled IP.
View 1 Replies
View Related
Dec 5, 2007
I am trying to install SQL failover cluster on one of my nodes so it should install sql on the 2nd node. It keeps coming back saying setup failed to start on the remote machine. When I look in scheduled tasks it is listed as could not run. Can someone please help.
View 1 Replies
View Related
Oct 29, 2015
1. Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. after fail over done to 2nd secondary node what mode in production(readonly or read write).
4. how to rollback to production primary ,will change data in secondary will get updated in primary.
View 5 Replies
View Related
Feb 18, 2014
I´ve been reading that SQL Server 2012 Always On is dependent on having a Windows Failover Cluster setup. Is that correct ?
View 6 Replies
View Related
Mar 31, 2008
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim
View 1 Replies
View Related
Jul 23, 2015
would like to know if it's possible to install SQL Server Failover cluster instance with shared storage along with standalone installation with Always on ( always on uses WSFC underneath).
View 1 Replies
View Related
Oct 29, 2015
1. In alwaysON fail over cluster, Once fail over to secondary replica, what will happen to connected session in primary node? can the session fail over to secondary seamlessly or need to re-login. what happen committed transactions which has not write to disk.
2. Assume I have always on cluster with three nodes, if primary fails, how second node make write/ read mode.
3. After fail over done to 2nd secondary node what mode in production(readonly or read write).
4. How to rollback to production primary ,will change data in secondary will get updated in primary.
View 3 Replies
View Related
Mar 11, 2008
Hiya All,
Our public network configuration is set up so that our database server is not directly connected to the internet at all, and does not have IIS installed.
That said, we would like to move to using Reporting Services...
Assuming we install IIS on that box and restrict port 80 to local only, is it possible to configure a subweb/virtual folder on another servers IIS to point to the same folder (on the network) that reporting services used (or some alternate way to configure a remote IIS install for a remote database?)
TIA
Dave Borneman
View 1 Replies
View Related
Dec 19, 2004
Hi,
I am using Windows XP PRO and trying to Install SQL SERVER 2000 Reporting Services.
I have already installed SQL SERVER 2000 developer Edition, sql server service pack 3, VS.NET 2003 and .NET frame work 1.1.
I downloaded the SQL Server 2000 Reporting Services Evaluation Edition. I expected that there are both Server Component and Client Components which are available to install because evaluation edition support all features of Enterprise Edition. However I only saw the Client Components available during setup. Where can I find the Server Components to install? I appreciate very much if I can get advice from any of you.
Thanks,
Jane
View 2 Replies
View Related
Jul 20, 2005
To Whom It May Concern:There is a piece of software that was needed to be installed to authorreports in Reporting Services for SQL 2000. That piece of software isVisual Studio .NET 2003. I do not have that piece but I am able toget the beta version of Visual Studio .NET 2005 from Microsoft. Willthat work for the installation and consequently the authoring part ofReporting Services? If not, could someone help me?Thank you in advance!Josh
View 1 Replies
View Related
Mar 24, 2008
I've been trying to install SQL Reporting Services 2005 on Server 2000.
Everything installed fine until I looked at the Web Service Identity which is blank. I've tried changed the rsconfig file, and giving everyone access, that did not change anything. I look on the database server and noticed that there is no ASPNET account. Not sure if this means anything, but I'm lost as to how to get the Web Service Identity to show anything other than blank.
Thanks
Will
View 4 Replies
View Related
Mar 30, 2007
Dear All,
I am making web application using Asp.net C#(Visual Studio2005). And Sql server 2000 as a back End upgraded with service pack 3 and analysis service.
Now I am trying to install sql server 2000 report services. But I run SQL2KRSSP1-ENG.EXE setup Then following error occurs
The upgrade patch can not be installed by window installer because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.
I redownload the same exe to other location. And again run but getting same error
Please Guide me or atleast give some help full link.
thanks
View 1 Replies
View Related
Apr 25, 2007
Everything installed fine except for the Reporting Services portion of the service pack...
Time: 04/25/2007 16:01:51.575
KB Number: KB921896
Machine: OIGASRVSQL001
OS Version: Microsoft Windows Server 2003 family, Enterprise Edition Service Pack 2 (Build 3790)
Package Language: 1033 (ENU)
Package Platform: x86
Package SP Level: 2
Package Version: 3042
Command-line parameters specified:
Cluster Installation: Yes
Log Location on Passive Nodes:
(OIGASRVSQL001) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
(OIGASRVSQL002) C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfix
**********************************************************************************
Prerequisites Check & Status
SQLSupport: Passed
**********************************************************************************
Products Detected Language Level Patch Level Platform Edition
Setup Support Files ENU 9.2.3042 x86
Database Services (OMNIDB1) ENU RTM 2005.090.1399.00 x86 ENTERPRISE
Reporting Services (OMNIDB1) ENU RTM 9.00.1399.00 x86 ENTERPRISE
Notification Services ENU SP2 9.00.3042.00 x86 ENTERPRISE
Integration Services ENU SP2 9.00.3042.00 x86 ENTERPRISE
SQL Server Native Client ENU 9.00.3042.00 x86
Client Components ENU SP2 9.2.3042 x86 ENTERPRISE
MSXML 6.0 Parser ENU 6.10.1129.0 x86
SQLXML4 ENU 9.00.3042.00 x86
Backward Compatibility ENU 8.05.2004 x86
Microsoft SQL Server VSS Writer ENU 9.00.3042.00 x86
**********************************************************************************
Products Disqualified & Reason
Product Reason
Database Services (OMNIDB1) This installation must be run from the active node. You are running it from a passive node. To proceed, cancel the installation and run it again from the active node.
**********************************************************************************
Processes Locking Files
Process Name Feature Type User Name PID
wmiprvse.exe Reporting Services Application 3224
**********************************************************************************
Product Installation Status
Product : Setup Support Files
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Database Services (OMNIDB1)
Product Version (Previous): 1399
Product Version (Final) :
Status : NA
Log File :
Error Description : This installation must be run from the active node. You are running it from a passive node. To proceed, cancel the installation and run it again from the active node.
----------------------------------------------------------------------------------
Product : Reporting Services (OMNIDB1)
Product Version (Previous): 1399
Product Version (Final) :
Status : Failure
Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixRS9_Hotfix_KB921896_sqlrun_rs.msp.log
Error Number : 2228
Error Description : MSP Error: 2228 The installer has encountered an unexpected error. The error code is 2228. Database: . Unknown table '_sqlDomainGroup' in SQL query: SELECT `Property`, `Component_`, `RestoreProperty`, `Service`, `ServiceName` FROM `_sqlDomainGroup` ORDER BY `Order`.
----------------------------------------------------------------------------------
Product : Notification Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Integration Services
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQL Server Native Client
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Client Components
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : MSXML 6.0 Parser
Product Version (Previous): 1129
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : SQLXML4
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Backward Compatibility
Product Version (Previous): 2004
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
Product : Microsoft SQL Server VSS Writer
Product Version (Previous): 3042
Product Version (Final) :
Status : Not Selected
Log File :
Error Description :
----------------------------------------------------------------------------------
**********************************************************************************
Summary
One or more products failed to install, see above for details
Exit Code Returned: 2228
View 1 Replies
View Related
Jul 5, 2007
Please help!
I have an asp.net 2.0 web app that integrates with reporting services. Since installing sql server 2005 sp2 I get the following error when trying to access reports:
An error has occurred during report processing. (rsProcessingAborted)
This data source is configured to use Windows integrated security. Windows integrated security is either disabled for this report server or your report server is using Trusted Account mode. (rsWindowsIntegratedSecurityDisabled)
I've checked the directory security for the report server website in IIS and integrated windows authentication is checked.
I can't understand what has caused the problem, before sp2 the reports were working fine.
Thanks in advance for any help,
Andy
View 3 Replies
View Related
Jul 7, 2007
I am trying to install SQL Server 2000 Reporting Services on a machine with Windows Server 2003. It keeps telling me ASP.NET is not installed or not configured with the web server. I have registered it with IIS using "C:WindowsMicrosoft.NETFrameworkv1.1.4322aspnet_regiis.ex
e -i" and I have installed all necessary updates and restarted the server. I've even set ASP.NET version 1.1.4322 as the default version on the Default Web Site. It is still claiming that it's not installed or not configured.
I checked the help and it says:
Report Manager is an ASP.NET application. If you are installing Report Manager, you must have ASP.NET installed and configured. Setup requires that version 1.1.4322 of ASP.NET be registered with IIS. If you are installing Reporting Services on Windows Server 2003, ASP.NET must be running as Network Service. For information about installing and configuring ASP.NET, see the setup documentation
As far as I can tell, ASP.NET 1.1.4322 is installed and configured and running as the user Network Service. Am I missing anything?
View 4 Replies
View Related
Oct 23, 2007
I am installing sql 2005 server and report services and receive an error "The setup has encountered an expected error while Setting reporting service and share point exclusion path. The error is: Fatal error during installation." Then sql server get installed but not reporting services. Please help. Thanks.
View 1 Replies
View Related
Oct 19, 2006
Is it possible to install and configure the MSDTC resource in a SQL Server 2000 cluster after SQL is installed and running?
When I recently went through a rebuild of my cluster, I forgot to install the resource before installing SQL Server. Now, if I install and bring online the MSDTC resource the SQL disk groups will not fail over correctly. The SQL Server resource will not come online.
Thanks in advance for any help. I would really like to avoid rebuilding again.
Andy
View 1 Replies
View Related
Jan 27, 2008
Hi,
I have problem during first configuration of Reporting Services from MS SQL 2005 Server Express with Advanced Services SP2. The error occurs when configuring virtual directory (Reporting Services Configuration Manager -> Report Server Virtual Directory). When I try to create new virtual directory I can see following messages:
Number of errors: 0
Create Virtual Directory
The virtual directory was created and assigned.
Changing Secure Connection Level
After last message Windows reports that SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close (and I can send report to Microsoft).
IIS shows that virtual directory under default web site was created.
Evenet viewer (application log) shows .NET Framework 2.0 error:
EventType clr20r3, P1 rsconfigtool.exe, P2 9.0.3042.0, P3 45cd6ee2, P4 rsconfigtool, P5 9.0.242.0, P6 45cd6ee2, P7 15a, P8 5, P9 system.nullreferenceexception, P10 NIL
My environment:
MS SQL Reporting Services Version 9.00.3042.00
Windows XP Proffessional SP2
IIS 5.1
all components are fresh new installations. The only additional configuration I've made was adding IWAM_<hostname> as WebServiceAccount, all other configuration is default.
Any help would be appreciated.
Best regards
Slawomir Nasiadka
View 2 Replies
View Related
Sep 13, 2006
Hello, any information about this issue would certainly be appreciated! I've been trying to install SP1 for my SQL Server 2005. There is a failure for the reporting services which appears in the following text from the log:
--------------------------------------------------------------------------------------------------
MSI (s) (7C:38) [13:43:05:402]: Note: 1: 2360
MSI (s) (7C:38) [13:43:05:402]: Note: 1: 2360
MSI (s) (7C:38) [13:43:05:402]: Note: 1: 2360
MSI (s) (7C:38) [13:43:05:402]: Note: 1: 2360
MSI (s) (7C:38) [13:43:05:417]: Note: 1: 2360
MSI (s) (7C:38) [13:43:05:417]: Executing op: CacheBaselineFile(Baseline=0,FileKey=RSWebUserInterface.dll.B7E12617_911F_413B_9E42_083AE8682587,FilePath=C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportManagerBinReportingServicesWebUserInterface.dll,,Existing=1)
MSI (s) (7C:38) [13:43:05:433]: Note: 1: 2318 2: C:WINDOWSInstaller$PatchCache$ManagedE281BDB31738DB64CA931CA4195DEE8F9.0.1399RSWebUserInterface.dll.B7E12617_911F_413B_9E42_083AE8682587
MSI (s) (7C:38) [13:43:05:621]: Executing op: FileCopy(SourceName=WebUse~1.dll|ReportingServicesWebUserInterface.dll,SourceCabKey=RSWebUserInterface.dll.B7E12617_911F_413B_9E42_083AE8682587,DestName=ReportingServicesWebUserInterface.dll,Attributes=20992,FileSize=1235744,PerTick=32768,,VerifyMedia=1,,,,,CheckCRC=0,Version=9.0.2047.0,Language=0,InstallMode=58982400,,,,,,,)
MSI (s) (7C:38) [13:43:05:621]: File: C:Program FilesMicrosoft SQL ServerMSSQL.1Reporting ServicesReportManagerBinReportingServicesWebUserInterface.dll; Overwrite; Won't patch; Existing file is a lower version
MSI (s) (7C:38) [13:43:05:621]: Source for file 'RSWebUserInterface.dll.B7E12617_911F_413B_9E42_083AE8682587' is compressed
MSI (s) (7C:38) [13:43:05:636]: Re-applying security from existing file.
MSI (s) (7C:38) [13:43:05:667]: Verifying accessibility of file: ReportingServicesWebUserInterface.dll
MSI (s) (7C:38) [13:43:05:667]: Verifying accessibility of file: ReportingServicesWebUserInterface.dll
MSI (s) (7C:38) [13:43:05:667]: Note: 1: 2318 2: C:Config.Msi73537e.rbf
MSI (s) (7C:38) [13:43:05:667]: Using source file security for destination.
MSI (s) (7C:38) [13:43:05:667]: Note: 1: 1310 2: 5 3: C:Config.Msi73537e.rbf
MSI (s) (7C:38) [13:43:05:667]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:667]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Transforming table Error.
MSI (s) (7C:38) [13:43:05:683]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (7C:38) [13:43:05:683]: Product: Microsoft SQL Server 2005 Reporting Services -- Error 1310. Error writing to file: C:Config.Msi73537e.rbf. System error 5. Verify that you have access to that directory.
Error 1310. Error writing to file: C:Config.Msi73537e.rbf. System error 5. Verify that you have access to that directory.
MSI (s) (7C:38) [13:43:05:730]: User policy value 'DisableRollback' is 0
MSI (s) (7C:38) [13:43:05:730]: Machine policy value 'DisableRollback' is 0
Action ended 13:43:05: InstallFinalize. Return value 3.
MSI (s) (7C:38) [13:43:05:746]: Executing op: Header(Signature=1397708873,Version=301,Timestamp=892169565,LangId=1033,Platform=0,ScriptType=2,ScriptMajorVersion=21,ScriptMinorVersion=4,ScriptAttributes=1)
MSI (s) (7C:38) [13:43:05:746]: Executing op: DialogInfo(Type=0,Argument=1033)
MSI (s) (7C:38) [13:43:05:746]: Executing op: DialogInfo(Type=1,Argument=Microsoft SQL Server 2005 Reporting Services)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RollbackInfo(,RollbackAction=Rollback,RollbackDescription=Rolling back action:,RollbackTemplate=[1],CleanupAction=RollbackCleanup,CleanupDescription=Removing backup files,CleanupTemplate=File: [1])
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi73536e.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi73536f.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735370.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735371.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735372.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735373.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735374.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735375.rbf)
MSI (s) (7C:38) [13:43:05:746]: Executing op: RegisterBackupFile(File=C:Config.Msi735376.rbf)
--------------------------------------------------------------------------------------------------
Please note that I develop reports locally against a database on another server; would this be part of the problem? Let me know if you need more info, too. Thanks.
View 3 Replies
View Related
Mar 12, 2007
Hello!
Has i install SQL Server 2005 Express Edition with Advanced Services but why that Report Manager it was not installed. To me will not address under the reference http: // localhost/reports$SQLExpress since such catalogue is not present in IIS. In what there can be a problem?
Thank's
View 3 Replies
View Related
Jan 7, 2008
Hi there,
I'm trying to install the common components for SQL 2005 on a server that already has Reporting Services 2005 installed on it. It keeps comng up with an error:
"To change an existing instance of Microsoft SQL Server 2005 to a different edition of SQL Server 2005, you must run SQL Server 2005 Setup from the command prompt and include the SKUUPGRADE=1 parameter."
The Reporting Services install has had SP2 applied to it, would that be what is messing up the install?
I have very little experience with SQL so any info would be helpful.
Thanks!
View 4 Replies
View Related
Feb 25, 2008
I'm trying to install SQL Server 2005 on a server 2000 machine, everything is working with the exception of the Web Service Identity. It is putting machinenameASPNET, and I don't know where to go to make it use something else. I've look around but I have really seen any answers that have worked for me.
Thanks in advance
Will
View 3 Replies
View Related
Jul 23, 2015
We have 2 nodes window Server 2012 R2 and SQL Server 2012 Enterprise Version cluster setup. We can switch roles and Node to one node to another and revert back to previous node with out any issues. But we are facing when one Node is restarted. We could not restart that Node in cluster Service start in Failover cluster Manager. Error Details is displayed as below inside double code."Cluster node NODE1 could not to join the cluster because it failed to communicate over the network with any other node in the cluster. Verify the network connectivity and configuration of any network firewalls."
I checked windows firewall. windows firewall is all of in Node1, Node2, SAN and DC.I have disabled and enabled the Internal and private network of Node 1. I have validated the cluster. it is showing no error though.
Node1:
Public IP: 10.10.0.11
SubNet Mask:255.255.255.0
Default Getway: 10.10.0.1
Prefered DNS: 10.10.0.10 (Ip of DNS)
[code]....
Private Network: Not configured.pinging to each other ip is successful from one node to another.
View 9 Replies
View Related
Dec 12, 2006
We have sql server 2005 installed locally on 2 servers and want to set up failover clustering. Do we need to uninstall what we have then install as failover cluster? Thanks.
View 3 Replies
View Related
Feb 4, 2008
Quick question; is SQL Reporting Services 2005 fully compatible with Windows Server 2008 / IIS 7 that RTM'd today?
View 1 Replies
View Related
Sep 13, 2006
I have a production failover cluster running SQL Server 2000 at SP3that I want to upgrade to SP4. I do not have a test failover clusterto test with so I need the install on the primary server to work thefirst time. Per the information I have I just install the patch on theprimary server and it will install both on the primary and on thesecondary.However, I remember when I did the initial install and it failed. Thefirst problem traced to the fact that the install uses temporary filesunder the profile of the installing administrator and the id had neverlogged into the second server so the install failed on creating thetemporary file. The was a second problem that related to an OS featurethat had to be off for the install to work.If anyone out there has done this upgrade and remembers encountering aproblem and its fix/workaround I would appreciate a head up warning.Thank you-- Mark D Powell --
View 1 Replies
View Related
Apr 16, 2008
Hi all,
I need some help to known more about basics of SQL Server 2005 failover cluster . pls provide me link to
known the concept.
Thanks,
Nav
View 6 Replies
View Related
Jan 28, 2008
Would that be compatible or do I need SQL Server 2008 to display the report?
Thanks,
Steven
View 5 Replies
View Related
Feb 8, 2008
I've never performed this type of installation. Any tips/ tricks you could provide would be greatly appreciated.
View 10 Replies
View Related
Jul 21, 2015
I have installed 2 node windows Fail-over clusters successfully. But QUARUM Configuration is not appearing in Failover cluster manager instead "Witness: Disk (Disk Cluster 4)". I have also configured quarum configuration from Quarum "Configure Cluster QUARUM Settings". I have attached the snapshots of windows cluster configuration. Is it the issue or not. I have not got any warning and error during cluster validation while installing Windows failover cluster. I am assuming it is okay and i can move ahead to installation of SQL Failover cluster setup.
Products used for installation in Virtual Machine:
Windows Server 2012 R2
SQL Server 2012 R2
Note: Service Pack is not installed.
View 2 Replies
View Related
Jun 11, 2008
Hai -
Currently i am do sql server 2005 failover cluster installation on win 2003 server.
It is showing preparing to install please wait and there is no progress from last two hours.
Is there any way to check whether installation is going on or where can i check log files for this installation.
Please advise asap.
Cheers:)
vsh
View 7 Replies
View Related
