SQL Server 2012 :: Create Variable In Select Query And Use It In Where Clause To Pass The Parameter
Sep 9, 2014
I am writing a stored procedure and have a query where I create a variable from other table
Declare @Sem varchar (12) Null
@Decision varchar(1) Null
Select emplid,name, Semester
Decision1=(select * from tbldecision where reader=1)
Decision2=(select * from tbldecision where reader=2)
Where Semester=@Sem
And Decision1=@Decision
But I am getting error for Decision1 , Decision2. How can I do that.
View 6 Replies
ADVERTISEMENT
Sep 17, 2015
How do you pass a value in a parameter to a variable ?
View 2 Replies
View Related
Jun 26, 2015
how do I get the variables in the cursor, set statement, to NOT update the temp table with the value of the variable ? I want it to pull a date, not the column name stored in the variable...
create table #temptable (columname varchar(150), columnheader varchar(150), earliestdate varchar(120), mostrecentdate varchar(120))
insert into #temptable
SELECT ColumnName, headername, '', '' FROM eddsdbo.[ArtifactViewField] WHERE ItemListType = 'DateTime' AND ArtifactTypeID = 10
--column name
declare @cname varchar(30)
[code]...
View 4 Replies
View Related
Jul 29, 2015
In some t-sql 2012 that I am using, I am using the following on 5 separate merge statements.
USING
(select LKC.comboID,LKC.lockID,LKC.seq,A.lockCombo2,A.schoolnumber,LKR.lockerId
from
[LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber =
LKR.number
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
and LKC.seq = 1
) AS LKC2 (comboID,lockID,seq,combo)
What is different, is the value of LKC.seq = 1 as listed below. I am using 5 separate ctes
and the only value that changes is the LKC.seq number being a value between 1 and 5. Thus
can you pass a parameter value to the CTE that I just listed above? If so, would you show me
the t-sql to accomplish this goal?
View 2 Replies
View Related
Sep 29, 2005
HI
I want to Run a Dynamic SQL in which i need to pass IN parameters.
DECLARE @QUERY varchar(100)
DECLARE @Paremeter varchar(10)
SET @Parameter = '1,2'
SET @QUERY='SELECT * FROM TABLE_NAME WHERE COLUMN_NAME IN (' + @parameter + ')'
But this causes an error that cant convert varchar string to int. Please dont suggest to avoid Dynamic Sql. I have to use it.
View 1 Replies
View Related
Sep 13, 2004
Hi,
I use a DataGrid to show the data, and I want it has a sorting and Paging function,
so I use dataset to collect the data from middle tier function and stored procedure.
I have code in aspx page like BindData(ViewState("SortExpr")).
In the stored procedure I pass SortExpr as parameter as following:
CREATE Procedure Ruying_AutoSearch10
(
@Make varchar(50),
@Model varchar(50) = NULL,
@Condition varchar(20) = NULL,
@Miles float,
@Zipcode varchar(5),
@SortExpr varchar(100)
)
AS
DECLARE @RowCount int
SELECT @RowCount = Count(*) FROM ZIPCodes WHERE ZIPCode = @Zipcode AND CityType = 'D'
if @RowCount > 0
BEGIN
SELECT
z.ZIPCode, z.City, z.StateCode, a.Make, a.Model, a.AutoPrice, a.AutoPrice2, a.AutoYear, a.Mileage, a.AdID, a.ImageURL, dbo.DistanceAssistant(z.Latitude,z.Longitude,r.Latitude,r.Longitude) As Distance
/*
The above functions requires the Distance Assistant.
*/
FROM
ZIPCodes z, RadiusAssistant(@ZIPCode,@Miles) r, AutoAd a
WHERE
z.Latitude <= r.MaxLat
AND z.Latitude >= r.MinLat
AND z.Longitude <= r.MaxLong
AND z.Longitude >= r.MinLong
AND z.CityType = 'D'
AND z.ZIPCodeType <> 'M'
AND z.ZIPCode = a.Zipcode
AND a.AdActive = '1'
AND a.AdExpiredate >= getdate()
AND a.Make = @Make
AND a.Model = IsNull(@Model,a.Model)
AND a.Condition = IsNull(@Condition, a.Condition)
AND dbo.DistanceAssistant(z.Latitude,z.Longitude,r.Latitude,r.Longitude) <= @Miles
ORDER BY @SortExpr
END
ELSE
SELECT -1 As ZIPCode
--ZIP Code not found...
GO
but I got the error as "variables are only allowed when ordering by an expression referenceing
a column name". How I fix this error? Please help.
Thanks.
Lin
View 9 Replies
View Related
Mar 19, 2008
I'm writing some generalized stored procedures for use form managed code. The following stored proc works great:
CREATE PROCEDURE fnd_Send (
@Message VARCHAR(5000),
@Contract SYSNAME,
@MessageType SYSNAME,
@FromService SYSNAME,
@ToService VARCHAR(100),
@Encrypted Bit
)
AS
BEGIN
DECLARE @Handle UNIQUEIDENTIFIER;
BEGIN DIALOG CONVERSATION @Handle
FROM SERVICE @FromService
TO SERVICE @ToService
ON CONTRACT @Contract
WITH ENCRYPTION = OFF;
SEND ON CONVERSATION @Handle
MESSAGE TYPE @MessageType(@Message);
Notice the use of SYSNAME parameters €“ translating the parameter into an object name - allows it to work in the BEGIN DIALOG statement when an system object is needed. Works create and cues up generic messages.
The following will not compile:
CREATE PROCEDURE fnd_Receive (
@Queue SYSNAME,
@Message VARCHAR(5000) out,
@MessageType SYSNAME out
)
AS
BEGIN
DECLARE @Handle UNIQUEIDENTIFIER;
RECEIVE TOP (1)
@Handle = conversation_handle,
@MessageType = message_type_name,
@Message = message_body
FROM @Queue;
END
GO
It won€™t let me use the SYSNAME field @Queue in the FROM clause. I€™m getting an unfriendly:
Msg 102, Level 15, State 1, Procedure fnd_Receive, Line 15
Incorrect syntax near '@Queue'.
It looks like maybe I can€™t bind a variable in the FROM clause €“ perhaps like you cannot in a SELECT statement. I can fall back to dynamic SQL in the stored proc or in the managed code; I was hoping not to.
Can anyone shed any light on this? Also, are there any other techniques I'm missing to avoid falling back to a dynamic SQL statement.
Thank you in advance -
Jeff Odell
Catapult Systems
View 3 Replies
View Related
Jun 4, 2015
the code below works (this is only a quick dumbed down version of the actual code, it might not work 100% for all cases). Is it at all possible to exploit the functions that were added to SSQL since v. 2005 to simplify this code ?
In SSRS, a parameter allows the user to create a list of invoices (from CRM) to be ordered in any of the following ways the user prefers:
'Document Date (most recent date first)'
'Document Number (highest number first)'
'Document Date (most recent first) and Number'
'Document Number (lowest number first)'
The invoices have a (supposedly) sequential identity-generated number. However Accounting may want to set a different date than the creation date on some invoices. So there is no way the invoice numbers will be in the same sequence as the invoice dates.
So I just created the "sorting fields" - they appear as junk in the output dataset (just do not drop them in the SSRS tablix - they have to be part of the SELECT statement to be usable in the ORDER BY clause.
The code is:
DECLARE @ls_OrderBy varchar(80)
--'Document Number (highest number first)'
--'Customer and Document Date (most recent date first)'
--'Customer and Document Number (highest number first)'
--'Document Date (most recent first) and Number'
[code]....
View 9 Replies
View Related
Nov 22, 2004
I'm having problem with an OpenQuery statement in stored procedure, which should be run on FoxPro linked server. I'm getting either an error messages or not the result I expected. I know that the problem is with WHERE part, without this part it works.
Here is the code:
-------------------------------------
DECLARE @LastDate datetime
SELECT @LastDate = MAX(DateChaged)
FROM tblPersonel
WHERE ACTIVE IN( 'A', 'T')
1. I tried:
SELECT * FROM OPENQUERY(FoxProLink, 'SELECT ACTIVE, EmpNumber FROM tblPersonel WHERE DateChanged >=''+@LastDate+''')
This line gives me an error msg:
Could not execute query against OLE DB provider 'MSDASQL'.
[OLE/DB provider returned message: [Microsoft][ODBC Visual FoxPro Driver]Operator/operand type mismatch.]
2. I tried to use CTOD() - FOXPRO function to convert character to date.
SELECT * FROM OPENQUERY(FoxProLink, 'SELECT ACTIVE, EmpNumber FROM tblPersonel WHERE DateChanged >=CTOD(''+@LastDate+'')')
-this doesn't give any error, but doesn't limit the result set as it should.
Thanks all.
View 2 Replies
View Related
Nov 2, 2015
From my one app, a dynamic where clause will generate like below.
//where ordercity='london' and orderby='smith'
//where orderamount > 100 and shipcity='new york'
From server, I created a store procedure as below.
SELECT * FROM [Order] WHERE @whereSql
How to complete the store procedure so that I don't need to pass parameters one by one...
View 1 Replies
View Related
May 30, 2007
Hi.I bet this is a 101 question, but i'd appreciate any help!I am in the 'where...' section of the configure data source wizzard .Column: I grab 'UserName' Operator: I select '='BUT how do I get the UserName (The user is signed into the app) Is it from the Form? Profile? Session?Ive tried profile.name..... THANKS In advance.... Dan
View 4 Replies
View Related
Jun 8, 2015
I have a two tables each having a uniqueidentifier column person_id
I am trying to a select statement where I want a list of the person_id's in one table that are not in another table.
-- insert into wch_needed those who need checked
insert into #wch_needed (person_id, rendered_by )
select distinct e.person_id, e.rendered_by
from #wch_who o, encounter e
where o.person_id not in (select distinct person_id from #wch_have )
and o.person_id = e.person_id
the where conditional
where o.person_id not in (select distinct person_id from #wch_have )
does not work.
How can I do this?
View 4 Replies
View Related
Feb 1, 2008
Hello,
I want to execute a sproc where the query statement goes something along these lines:
SELECT * FROM myTable WHERE @aVarCharVariable
@aVarCharVariable contains column names and their possible values
How do I achieve this?
Cheers!
/Eskil
View 7 Replies
View Related
Jul 27, 2014
I want to create the following scenario. I have a table that stores employees working on projects and their project hours by week, but now I also need a running total per week for each of those projects. For example take a look below:
EmployeeID, Project, Sunday, Monday, Tuesday,....Saturday, ProjectHours, TotalProjectHoursPerWeek(this is the column I am trying to derive), FiscalWeek
101, ProjectABC, 5,5,5,...5, 20, 40,25
102, ProjectXYZ 4,4,4,....4, 20 ,40,25
103,ProjectQWE, 2,2,2,...2, 8, 32,26
104, ProjectPOP, 6,6,6,...6, 24, 32,26
What I have tried so far:
Correlated Subquery:
SELECT EmployeeID,Project, Sunday, Monday,....Saturday, ProjectHours, SELECT(SUM(ProjectHours) FROM dbo.TableABC ap GROUP BY FiscalWeek),
FROM
dbo.TableABC a
I got this to work one time before, but now I am getting the following error:
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
View 2 Replies
View Related
Oct 11, 2014
I can't understand why I get 2 different results on running with a Bracket I get 'NULL' and without a bracket I get the declared variable value which is 'Noname'
Below is Query 1:
Declare @testvar char(20)
Set @testvar = 'noname'
Select @testvar= pub_name
FROM publishers
WHERE pub_id= '999'
Select @testvar
Out put of this query is 'Noname'
BUT when I type the same query in the following manner I get Null-------Please note that the only difference between this query below is I used brackets and Select in the Select@testvar statement
Declare @testvar char(20)
Set @testvar = 'noname'
Select @testvar=(Select pub_name
FROM publishers
WHERE pub_id= '999')
Select @testvar
View 4 Replies
View Related
Nov 27, 2014
The following works in query if I specify one student (PlanDetailUID) when running query. If I try to specify multiple students (PlanDetailUID) when running query, I get variable cannot take multiple entries. I assume I would need to replace (variables) in PART 2 with (case statements / using select everywhere) to get around the issue or is there a better way ?
CREATE TABLE #AWP (
[TransDate] [datetime] NULL,
[Description] [varchar](1000) NULL,
[Amount] [float] NULL,
[TotalDueNow] [float] NULL,
[code]....
View 4 Replies
View Related
May 3, 2007
In SSIS in Sql task we have option to pass parameter or variable..But in Data Flow Task when we use Data Reader Source using ADO.NET connection..There is no option to pass parameter or variable Or no option to receive a parameter or variable .
I am having a query were it need to pass a parameter.in sql task ...And Data Reader Source have to receive this parameter from sql task .
Sql Task finds a value of parameter and pass to DataReader Source in DataFlow Task .. ...
Please can any one help me to solve this problem of Receiving parameter or variable in DataReader Source using DAO.Net connection in DataFlow Task..thank you dilsa
View 3 Replies
View Related
Aug 22, 2007
Hello--I do not know if this group can help me with SQL Server Reporting Services ... but here it goes. I have a report built on a query and I want to be able to send a parameter (@theWhere) that is a string which is a where clause "(MEGLOMART_TYP_CODE <> 'XYZ' AND MEGLOMART_STAFF_SHORTAGE > 25)" these strings can vary depending on what columns the user selects and what operators they want to use. Generation of proper SQL for the where clause has been verified, I just need to be able to pass these, is there any way to do this...see example query below and how I was planning on using the @theWhere variable...
Thanks!
SELECT DISTINCT SALES_REGION,
SALES_REGION_CODE,
PRODUCT_CLASS_DESC,
MEGLOMART_STORE_ID,
STATE_NAME,
MEGLOMART_TYP_CODE,
MEGLOMART_TYP_DESC,
MEGLOMART_COMMUNITY_POPULATION,
MEGLOMART_PENETRATION_PERCENT,
MEGLOMART_STAFFING_TARGET,
MEGLOMART_STORE_FT_STAFF,
MEGLOMART_STORE_PT_STAFF,
MEGLOMART_STAFF_SHORTAGE,
MEGLOMART_STAFF_TRAINEE_COUNT,
(CASE MEGLOMART_TYP_CODE
WHEN 'MEGA' THEN 'Full Service'
WHEN 'MID' THEN 'Traditional'
WHEN 'MIN' THEN 'Convenience'
ELSE 'Other' END) AS MEGLOMART_TYP_GRP,
(CASE WHEN MEGLOMART_TYP_CODE = 'MEGA' THEN 1
ELSE 0 END) AS MEGLOMART_MEGA_TYP_COUNT,
(CASE WHEN MEGLOMART_TYP_CODE = 'MID' THEN 1
ELSE 0 END) AS MEGLOMART_MID_TYP_COUNT,
(CASE WHEN MEGLOMART_TYP_CODE = 'MIN' THEN 1
ELSE 0 END) AS MEGLOMART_MIN_TYP_COUNT,
(CASE MEGLOMART_TYP_CODE
WHEN 'MEGA' THEN 0
WHEN 'MIN' THEN 0
WHEN 'MID' THEN 0
ELSE 1 END) AS MEGLOMART_OTH_TYP_COUNT
FROM
dbo.MEGLOMART_SNAPSHOT AS theView
WHERE
(PRODUCT_CLASS_DESC = 'Home Furnishings') AND
(NOT (SALES_REGION IS NULL))
AND @theWhere
ORDER BY
STATE_NAME,
PRODUCT_CLASS_DESC
View 26 Replies
View Related
Feb 4, 2014
From MS Dynamics NAV 2013 I get a lot of querries that have a where clause like this:
where [Field1] like @p1 and [Field1] < @p2.
Field1 is the only primary key field and clustered index. The query also has a TOP 50 clause.
@p1 is always a "Starts-With"-value (something like N'abc%').
The query plan uses a clustered index seek but the number of reads look more like a clustered index scan.
Depending on the table size I see 1M or more reads for these querries.
If I rebuild the query in SSMS, but replace the paramerters with actual values I only see a few reads.
I was able to reproduce the issue with a temp table. See code below.
Is there a way to make SQL Server use another strategy when using the parameterized query?
SQL Server Version is 11.0.3401.
if object_id('tempdb..#tbl') is not null
drop table #tbl;
create table #tbl
(
[No] nvarchar(20)
,[Description1] nvarchar(250)
[Code] ....
View 9 Replies
View Related
Jul 2, 2015
I am creating a dynamic query where i am appending a where clause something like -
IF (@CurCaptureDate IS NOT NULL)
SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + @CurCaptureDate
PS - CD.CaptureDate is datetime and @CurCaptureDate is also datetime
but when executing , it gives this error - Msg 241, Level 16, State 1, Line 169 Conversion failed when converting date and/or time from character string.
i am not able to use convert here with these quotes.
i tried this - SET @where_clause = @where_clause + CHAR(10) + 'AND CD.CaptureDate = ' + CONVERT(VARCHAR(25),@CurCaptureDate )
but it makes it to -
AND CD.CaptureDate = Jul 19 2014 12:00AM. I would need the date in quotes.
View 4 Replies
View Related
Sep 5, 2014
I have a temp table that hosts data from a MDX query, I want to select a column from that table by passing in a parameter and then insert to a new table.
Here's the table structure, let's call it #temp
[Product].[Product Hierarchy].[level 03].[Member_CAPTION], [Measures].[Gross Sales]
Bike, 200
Accessory , 100
I have a table in the DB created as [ProductSales]
Here's what works for me:
insert into [ProductSales](Product, Sales)
Select convert(varchar(20), "[Product].[Product Hierarchy].[level 03].[Member_CAPTION]") as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales'
From #temp
But in reality the product level is not always on level 03, I want to define a parameter @Product and pass it to the select list.
Here's what I tried to do:
Declare @Product varchar(500) = convert(varchar(20), "[Product].[Product Hierarchy].[level 01].[Member_CAPTION]")
Declare @SQL varchar(MAX)
SET @SQL='insert into [ProductSales](Product, Sales)
Select '+@Product+' as 'Product' , convert(decimal(18,2), [Measures].[Data]) as 'Sales'
From #temp'
Exec @SQL
But it threw me error, what is the right way to do it, is it because the double quote or single quote thing?
View 1 Replies
View Related
Dec 28, 2004
I have a table 'table_list' which contains two columns, table_name and a record_count. This table stores a list of tables and their corresponding record counts.
What I am trying to do is, to be able to write a select statement, that can read each table name in the 'table_name' column, execute a select count(*) for the same, and update its record_count with the result of select count(*).
This is the code in my procedure..
DECLARE @tab_list CURSOR
set @tab_list = CURSOR FOR select * from table_list
OPEN @tab_list
DECLARE @tab_name varchar(256)
DECLARE @rec_cnt int
FETCH NEXT FROM @tab_list INTO @tab_name, @rec_cnt
select count(*) from @tab_name
This select is looping around along with FETCH till all the table names are exhausted and their counts are updated from the cursor back into the table.
Problem is that, I am not able to use select count(*) from @tab_name, and its not accepting a variable there.
Please help me to construct the select statement that is similiar to
x=<table name>
select * from x
where x is a variable and the table name gets substituted.
what is the syntax for it ?
View 7 Replies
View Related
Feb 24, 2015
I am new to SQL Server and I am trying to create a script / possible a cursor that will allow me to create multiple logins in one pass - without having to type each one.
I have 20 users USER1, USER2, USER3, USER4... but I can't seem to figure out how to get those users into a loop
so I can end up with something like this.
CREATE LOGIN <user> FROM WINDOWS WITH DEFAULT_DATABASE=[master], DEFAULT_LANGUAGE=[English]......
I realize I can type this statement 20 times but perhaps there is a faster way -
View 3 Replies
View Related
Aug 21, 2014
How I am using a CASE statement within a WHERE clause to filter data:
CREATE PROCEDURE dbo.GetSomeStuff
@filter1 varchar(100) = '',
@filter2 varchar(100) = ''
AS
BEGIN
SELECT
[Code] .
What I want, is to be able to pass in a single value to filter the table, or if I pass in (at the moment a blank) for no filter to be applied to the table.
Is this a good way to accomplish that, or is there a better way? Also, down the line I'm probably going to want to have multiple filter items for a single filter, what would be the best way to implement that?
View 5 Replies
View Related
Apr 19, 2007
All,
Please can someone advise how to use SQL select statement with where clasue which is based on a textBox.text value.
ex. below example I set the textbox.text value to a C# variable called TextBoxValue1 but I receive error this is not a valid
This is all done in Page_Load event backend code.
string strCommandtext = "Select Type.TypeName, Type.TypeDesc FROM Type Where Type.TypeName = TextBoxValue1";
View 2 Replies
View Related
Dec 13, 2000
I have the following function that is run when a person
enters a value, "Cell", in an access form. I am trying to
execute the pass through query in SQL Server but i keep
getting the following message:
"The microsoft jet database engine cannot find the input
table or query 'CellDefs'. Make sure it exists and its name
is spelt correctly."
There is nothing wrong with the table name.
I cant understand what the problem is ?????
Can anyone tell me how to execute a query that passes
a parameter from access to Sql server.
Thanks,
Ruaidhri
Public Function GetData(Cell As String)
Dim dbsCurrent As Database
Dim qd1 As QueryDef
Dim SQL As String
Dim rs As Recordset
Dim qdf As QueryDef
Set dbsCurrent = CurrentDb
Set qd1 = dbsCurrent.CreateQueryDef("")
With qd1
.Connect = "ODBC;DSN=MISChief;SERVER=Janeway;UID=sa;PWD=;DATA BASE=MIS"
SQL = ""
SQL = SQL + "INSERT INTO TableX SELECT A.Name AS CellCode, C.FinderNumber"
SQL = SQL + "FROM (CellDefs AS A INNER JOIN Calls AS B ON "
SQL = SQL + "A.CellDef_id = B.CellDef_id) INNER JOIN Finders AS C ON "
SQL = SQL + "B.Finders_id = C.Finders_id "
SQL = SQL + "WHERE A.Name LIKE '" & Cell & "' "
SQL = SQL + "ORDER BY C.FinderNumber"
.ReturnsRecords = False
.ODBCTimeout = 2400
dbsCurrent.Execute (SQL)
End With
dbsCurrent.Close
End Function
View 1 Replies
View Related
Jan 13, 2007
Here is my procedure:
ALTER PROCEDURE dbo.SelectMeds
@RX int
AS
SELECT RX FROM tblMeds WHERE RX= @RX
RETURN
but it return no rows, how do I fix this?
View 4 Replies
View Related
Mar 28, 2000
Hi
I am ramesh here from go-events.com
I am using sql mail to send out emails to my mailing list
I have difficulty combining a select statement with a where clause stored in a variable inside a cursor
The users select the mail content and frequency of delivery and i deliver the mail
I use lots of queries and a stored procedure to retrieve thier preferences. In the end i use a cursor to send out mails to each of them.
Because my query is dynamic, the where clause of my select statement is stored in a variable. I have the following code
that does not work
For example
DECLARE overdue3 CURSOR
LOCAL FORWARD_ONLY
FOR SELECT DISTINCT Events.E_Name, Events.E_SDate, Events.E_City, Events.E_ID FROM Events, IndustryEvents + @sqlquery2
OPEN overdue3
I get an error message at the '+' sign
which says, cannot use empty object or column names, use a single
space if necessary
How do I combine the select statement with the where clause?
Help me...I need help urgently
View 1 Replies
View Related
May 13, 2007
just getting started with my first db driven web project...
I am using a MySql database with membership and roles and got that working fine. I have tables containing details of courses that users are enrolled on etc. and want to display a list of courses for the user that is signed in, so he can continue lessons on the one of his choice.
How do I pass the users name to the database query for a DataList control. So far I have tried lots of variations of the following:
<asp:SqlDataSource ID="dsCourses" runat="server" ConnectionString="<%$ ConnectionStrings:xxx %>" ProviderName="<%$ ConnectionStrings:xxx.ProviderName %>" SelectCommand="SELECT c.CourseName FROM courses c, enrolments e WHERE c.CourseID=e.CourseID AND e.Username='<% =User.Identity.Name %>'"></asp:SqlDataSource>
<asp:DataList ID="DataList1" runat="server" DataSourceID="dsCourses"> <ItemTemplate> <asp:HyperLink ID="HyperLink1" runat="server" NavigateUrl="Lesson.aspx">'<%# Eval("CourseName") %>'</asp:HyperLink><br /> </ItemTemplate></asp:DataList> </p>
However, the <% =User.Identity.Name %> doesn't work here (but it does elsewhere on the page) - not sure why?? The code works fine if I hard code a user name into the select statement.
Suggestions pleeeeeese!!
View 1 Replies
View Related
Feb 11, 2015
I have a multiselect checkbox list in my UI. I pass the list items to my stored proc as comma separated parameter and then I have a function which converts this parameter to a table with separate rows.
E.g. : a,b,c,d
Converted to result table
result
a
b
c
d
I want to insert each row of the result table into another table. How to do that.
E.g., the table after the function is :
CREATE TABLE #result
(
Subject varchar(100)
)
insert into #result values ('a')
insert into #result values ('b')
insert into #result values ('c')
insert into #result values ('d')
So the pseudo code is something like
for each row in #result
insert row into another table
View 9 Replies
View Related
Jul 9, 2015
we can  assign one parameter value for each excecution of  [SSISDB].[catalog].[set_object_parameter_value] by calling this catalog procedure..
Example: If I have 5 parameters in SSIS package ,to assign a value to those 5 parameters at run time should I call this [SSISDB].[catalog].[set_object_parameter_value] procedure 5 times ? or is there a way we can pass all the 5 parameters at 1 time .
1. Wondering if there is a way to pass multiple parameters in a single execution (for instance to pass XML string values ??)
2.What are the options to pass multiple parameter values to ssis package through stored procedure.?
View 4 Replies
View Related
Jan 31, 2008
how to pass array(query parameter) into stored procudure. with this array i need to retrive data,with another array i have to retrive another set of data.
eg: suppose @param1 contains chapter1,Chapter2,Chapter3,
@param2 contains unit1.1,unit2.1,unit2.2,unit3.1,unit3.6
how can i do in stored procedure
love all
View 1 Replies
View Related
Apr 3, 2014
I want to update one table with the value from variable using a set based approach.
so the line
>> select @List = coalesce(@list + ',','') + cast(id as varchar(10)) + cast(feetype as varchar(25))
works fine but I want to take @list and use it to update my customers table. here is the full code.
create table customers
(custid int, fee_history varchar(max))
insert into customers
(custid
, fee_history
[code]....
View 5 Replies
View Related
