RO1 BOOK RL1 PDF/ECOPY
RO2 PAPER RL2 CONFERENCE
RO5 JOURNAL RL11 OTHER
Now, on the above query I want to insert three extra columns with the name (status, location and contact) where the results in the extra three columns would be based on the conditions I want to define in the query based on the above results…
Something for example (I am not trying to write a condition: my question is how to write it),
if column_code1 = RO1 and column_description2 = PDF/ECOPY on status column it should return a value ‘ONLINE’ & on location column it should return ‘WEB’ and on contact column it should write ‘BOB’.
Also, if column_code1 = RO5 and column_description1 = JOURNAL on status column it should return a value ‘ON PRESS FOR PRINT’ & on location column it should return ‘S.R STREET, LONDON’ and on contact column it should write ‘SMITH’ like below result…so the final output should be the top four columns and the extra three columns…
See the attachment for better formatting...
---------------------------------------------------------------------------------------------
status location contact
---------------------------------------------------------------------------------------------
ONLINE WEB BOB
ON PRESS FOR PRINT S.R STREET, LONDON SMITH
I want to write a query that will cycle through the results and if it comes across another record that has a matching Table.ID I want to exclude that row from the result set.
I am not all too familiar with how to use either a Case or If..Else Statement within a Sql statement that would accomplish this.
My requirement is to alter themaster table schema i.e to add a column with the name as of the table name i.e Cat3 and will lok lie as foolows Table Master {
My requirement is below.enhancing the T- sql query as I was told not to use SSIS.
Insert data from Table A to Table B with conditions:
1. Truncate gender to one character if necessary.
2. Convert character fields to uppercase as necessary.
3. For systems that supply both residential and mailing addresses, use the residential address if available (both street_address and zip fields have value), mailing address otherwise.
In SSIS I took conditional split with 'ISNULL(res_street_address) == TRUE || ISNULL(res_zip) == TRUE '
default outputname :Consider Res Address; Outputname:Consider mail address.
and mapped as:
(Table A) mail_street_address---street address(Table B)
(Table A) mail_city----------------City(Table B)
(Table A) mail_Zip----------------Zip(Table B)
(Table A) mail_state-------------state(Table B)
(Table A) res_street_address--street address(Table B)
(Table A) res_city---------------City(Table B)
(Table A) res_Zip----------------Zip(Table B)
(Table A) res_state--------------state(Table B)
I want to do the same with T-sql code too:
I came up with below T-SQl but unable to pick(street,city,state,zip columns as I have take combination of street and zip from Table A not individual columns as I wrote in below query) based on above condition(3):
Insert into TABLE B SELECT Stats_ID ,UPPER(first_name) first_name ,UPPER(middle_name )middle_name ,UPPER(last_name) last_name ,UPPER(name_suffix) name_suffix
I have a table where I need to concatenate and sum based on conditions given below .
CREATE TABLE #DimOrder ( [ID] [INT] IDENTITY(1,1) NOT NULL, [OrderID] [INT] NOT NULL, [SalesRegion] [VARCHAR](5) NULL, [OrderType] [INT] NOT NULL,
[Code] ....
Example SELECT 1296 AS OrderID, 2547 AS ProjectID,364 AS ProductID,6 AS FormatID,66 AS MEdiaTypeID,'Fast Track,Fast Track' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'LTO4_800' AS MEdia ,41.67000 AS aPPLIEDRATE
IF OrderID,PrjectID,ProductID,FormatID,MediaTypeID AND AppliedRate AND ProductComment IS different , THEN I want TO concetenate ProductComment AND sum AppliedRate
Example SELECT 1207 AS OrderID, 2351 AS ProjectID,364 AS ProductID,6 AS FormatID,32 AS MEdiaTypeID,'no charge,final volume' AS ProductComment,'sq mi' AS UOM,'Y' AS FormatName,'3590E' AS MEdia ,55.56000 AS AppliedRate
I've two tables A, B. In A table, I need to define the primary key with combination of 2 columns and this Primary Key will be a foreign key in table B. Based on these PK and FK I'll be writing a join to get the second column in table B.
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
Create table DBInfo (Path varchar (500)) Insert into DBInfo values('/Data Sources') Insert into DBInfo values('/Data Sources/SALES') Insert into DBInfo values('/PRODUCTION') Insert into DBInfo values('/PRODUCTION/SERVICE') Insert into DBInfo values('/PRODUCTION/SERVICE/MAINTENANCE') Insert into DBInfo values('/PRODUCTION/SERVICE/LOGISTICS')
My Expected Output
Column1,Column2,Column3 Data SourcesNullNull Data SourcesSalesNull PRODUCTIONNullNull PRODUCTIONSERVICENull PRODUCTIONSERVICEMAINTENANCE PRODUCTIONSERVICELOGISTICS
I am trying to take the results of a query and re-orient them into separate columns.
select distinct W_SUMMARYDETAILS.FACILITY_ID, W_SUMMARYDETAILS.REPORTING_YEAR, (2011 - 2014, I want these years broken out into columns for each year) W_SUMMARYDETAILS.FACILITY_NAME, W_DEF_SUMMARYDETAILS.REPORTING_PERIOD (2011 - 2013, I want these years broken out into columns for each year) From W_SUMMARYDETAILS full outer join W_DEF_SUMMARYDETAILS on W_SUMMARYDETAILS.FACILITY_ID=W_DEF_SUMMARYDETAILS.FACILITY_ID and W_SUMMARYDETAILS.REPORTING_YEAR=W_DEF_SUMMARYDETAILS.REPORTING_PERIOD
As of now the query puts all the years into a single column -- one for DEF_SUMMARY and another for SUMMARY.
I am looking to create 7 additional columns for all the individual years in the results instead of just two columns.
Here we need consider patient dates that fall between sdate and edate of the patientrefs table, and then we need to consider the highest status values in order (for example, the highest values in order - 2 is first highest, 4 is second highest, 3 is third highest, and 1 is fourth highest value)
If the date falls between multiple different sdate and edate with the same status values, then we need to consider the latest sdate value and from that entire record we need to extract that value.
Here, pn=2 values have dates which fall between sdate and edate of patientref table. Then we give highest values status is 2, and status 2 values have two records, then we go for max sdate(latest sdate). Then this pn=2 latest sdates is 2015-02-10 and we need to retrieve the corresponding edate and status values.
pn = 4donot have sdate and edate and status values dut not fall conditon
select p.pn,p.code,p.[date],p.doctorcode,pr.sdate,pr.edate,pr.[status] from patient p outer apply (select top 1 pr.pn,pr.code,pr.sdate,pr.edate,pr.[status] from patientref pr where pr.pn=p.pn and pr.code=p.code and p.date between pr.sdate and pr.edate order by case when pr.status=2 then 1 when pr.status=4 then 2 when pr.status=3 then 3 when pr.status=1 then 4 end ,pr.sdate )pr
but this query not given expected result.here when dos not fall between sdate and edate that records not given in the above query. I required that records also.if not fall b/w condition then we need retrive that records empty values for that records.
I am working on a Statistical Reporting system where:
Data Repository: SQL Server 2005 Business Logic Tier: Views, User Defined Functions, Stored Procedures Data Access Tier: Stored Procedures Presentation Tier: Reporting ServicesThe end user will be able to slice & dice the data for the report by
different organizational hierarchies different number of layers within a hierarchy select a organization or select All of the organizations with the organizational hierarchy combinations of selection criteria, where this selection criteria is independent of each other, and also differeBelow is an example of 2 Organizational Hierarchies: Hierarchy 1
Country -> Work Group -> Project Team (Project Team within Work Group within Country) Hierarchy 2
Client -> Contract -> Project (Project within Contract within Client)Based on 2 different Hierarchies from above - here are a couple of use cases:
Country = "USA", Work Group = "Network Infrastructure", Project Team = all teams Country = "USA", Work Group = all work groups
How to implement the data interface (Stored Procs) to the Reports Implement the business logic to handle the different hierarchies & different number of levelsI did get help earlier in this forum for how to handle a parameter having a specific value or NULL value (to select "all") (WorkGroup = @argWorkGroup OR @argWorkGrop is NULL)
Any Ideas? Should I be doing this in SQL Statements or should I be looking to use Analysis Services.
Is it possible to stop a query from running if a condition is not met?
I have a stored procedure that returns some email addresses. A condition is that a load of new data should have happened in the current month.
If a load of new data hasn't happened I want the stored procedure to stop and return an error message instead of returning the email addresses.
I have a variable that finds the maximum data load date and I thought I could use an IF... ELSE... to check if new data had been loaded. Like this:
DECLARE @MaxLoadDate as date = (select max(load_date) from #table) IF @MaxLoadDate<Dateadd(month, Datediff(month, 0, Getdate()), 0) --First Day of Current Month <Something here to kill the query> ELSE SELECT email_address FROM... etc
I've tried a couple of things like PRINT 'Error', and SET NO EXEC ON, but the query seems to happily carry on past the IF condition and return the email addresses. I know that data hasn't been loaded this month, so it should fail.
I want to identify rows that go negative but only for 2 cents or more as well as identify rows that 2 or more.
I have this expression that does not work how I want it to work:
CASE WHEN (SUM(FavUnfavCostChange) < (2/100) THEN 'Less' WHEN SUM(FavUnfavCostChange) > (2/100) THEN 'More' ELSE NULL END AS 'Flag'
But I get:
0.00000815000000000000More -- this is not more than 2 cents, is just a positive number -0.00094700000000000000Less -- this is not less than 2 cents, is just negative number -0.00222000000000000000Less -- this is not less than 2 cents, is just negative number -0.00012250000000000000Less -- this is not less than 2 cents, is just negative number 0.00000000000000000000NULL -- this is zero so null is fine 0.01188576000000000000More -- this is not more than 2 cents, is just a positive number
I am trying to add a where condition on an ID column(type - INT) with values coming from a variable (type - STRING). i am using cast to cast the ID as Varchar and then apply the condition, but i am not getting any results back. following is an example of what i am trying to do.using temp table in the example , so you can copy the t-sql and run as is.
I want to join 2 tables, table a and table b where b is a lookup table by left outer join. my question is how can i generate a flag that show whether match or not match the join condition ?
**The lookup table b for column id and country are always not null values, and both of them are the keys to join table a. This is because same id and country can have multiples rows in table a due to update date and posting date fields.
example table a id country area 1 China Asia 2 Thailand Asia 3 Jamaica SouthAmerica 4 Japan Asia
example table b id country area 1 China Asia 2 Thailand SouthEastAsia 3 Jamaica SouthAmerica 5 USA America
Expected output id country area Match 1 China Asia Y 2 Thailand SouthEastAsia Y 3 Jamaica SouthAmerica Y 4 Japan Asia N
I'm trying to join two tables based on a like condition. The first table contains the full IP, e.g. '166.27.12.24' and the second contains a 2 octet range, e.g. '166.27', which I need to join.
I have a column with serial numbers 1, 2,3,4,....etc...I want to have P1 for first 4 serial numbers to be displayed in a separate column beside Serial number column and for the next four serial numbers (5,6,7,8) it should be P2 and like that I want till P13 and for next again it should start with P1(I mean after P13 it should give again P1 instead of P14) and continue the same process.
Column name of Serial number is [S.No] table name for example is #temp1
I am facing a challenge and hope some one can help me with the query.
I have a school. School have classrooms. Classrooms are divided into various sections (Section A, Section B and so on) . Sections have subsections. Every student is allocated a rollnumber in that section.(Subsection is just for dividng the sections. it has no other use.) Now the student is given a choice to specify his own roll( DesiredRoll) in that section. If two children select the same rollno, then the system internally allocates a trackingno.(There can be multiple roll no as these are allocated manually by admin). Let me demonstrate this:
So when the first entry is made in the db, and let us say that the section to be allocated is A, RollNo is 1 and the DesiredRoll is 1
Student 1 Section A Subsection 1 Roll No 1 DesiredRoll 1 TrackingNo 0
The second entry is made in the db and let us say the section to be allocated is A, RollNo is 2 and the DesiredRoll is 2
Student 2 Section A Subsection 1 Roll No 2 DesiredRoll 2 TrackingNo 0
Now let us say there is a 3rd entry the section to be allocated is A, RollNo is 3 but the DesiredRoll is 1. Now since the DesiredRoll has already been taken, we will allocate the DesiredRoll 1, however now the trackingNo will be 1
Let us say there is a 4th entry is made, the section to be allocated is A, RollNo is 4 but the DesiredRoll is again 1. Now since the DesiredRoll has already been taken, we will allocate the DesiredRoll 1, however now the trackingNo will be 2
Similarly this logic will work for different sections. How will I write a query so that I can detect this scenario and increment the tracking no or allocate a tracking no of 0 if there is a new entry made in that section
My question is that: Just one month before subscriptionendperiod that is on 11/20/2005(mm/dd/yyyy) an automatic email should go to david@john.com with the message 'Your subscription period ends on 12/20/2005'
How to write trigger for this.
Please Note : No ASP code is invloved in this. Only MSSQL coding to be done.
For UserA : - For problemID 1 -> submitted three times -> rejected for first two submission and accepted on third submission. - For problemID 2 -> submitted one time -> accepted on first submission
For UserB : - For problemID 1 -> submitted two times -> rejected for first submission and accepted on second submission. - For problemID 2 -> submitted one time -> accepted on first submission
Now I would like to process the table and want to get the following result :
Explanation : - For each rejected submission, a -2 point penalty. - UserA have submitted probelmID 1 - > score of problemID 1 is 10. - > first two times rejectd - > third time accepted. -> score = 10 - 4 = 6 - UserA have submitted problemID 2 - > score of problemID 2 is 30 - > first time accepted. No penalty will be counted - > score = 30
HI all,In SQL Server, i have a function which will return a table. likecreate function fn_test (@t int) returns table asreturn (select * from table)now i want the function to retun the table based on some condition like belowcreate function fn_test(@t int) returns table asif @t = 1 return (select * from table1)else return (select * from table2)It is not working for me. Please give me your suggesstions. It's very urgent.Thank you in advance....
I have one main report which has 5 subreport. i dont want to show all the sub reports all the time. i want to suppress any subreport based on some conditioned. can i do it in case of the SSRS. How?
I have two tables : Students and StuHistory. The structure of the Student table is as follows :
IF NOT EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[Student]') AND type in (N'U')) BEGIN CREATE TABLE [dbo].[Student]( [RID] [int] NOT NULL, [Class] [int] NULL, [Section] [char](1) COLLATE SQL_Latin1_General_CP1_CI_AS NULL, [SubSection] [int] NULL, [RollNo] [int] NULL, [DesiredRoll] [int] NULL, [TrackingNo] [int] NULL, [Original_rollno] [int] NULL, [StudentStatus] [int] NULL ) END GO
A section has subsections where students are allocated rollno's. Every student has a unique roll no in that subsection. However he is also given a choice to enter his desired roll no. If more than one student choose the same desired roll no in that subsection/section, there is a [TrackingNo] field that then starts keeping a count. For the first unique desired roll no in that subsection/section the tracking no is always 0. [StudentStatus] represents the following : (-1 for deleted, 0 for edited, 1 for newly inserted).
After every fortnight, i have to run a batchquery that does the following:
1. all students marked with -1 are moved to a table called StuHistory which has the same structure as that of Student.
2. Now oncethe -1 status students are moved, there will be a gap in the roll no. I want to reallocate the rollnos now, where rollnos = desired roll no taking into consideration the trackingno
So if 4 students have chosen the desired roll no as 5 and their current roll no is scattered in a subsection lets say 7, 10, 14,16, then while rearranging they will be together(grouped by subsection/section) and will be allocated roll no's 5,6,7,8. The other students will be moved down based on their desired roll nos. Over here i have to also fill the gaps caused because of the students who were deleted.
How do i write query for this? I have been struggling.
I thought of posting this as a new post as it was mixed in the previous post.
I have created a sample Database for the school project,
After executing the query below, the Date column is supposed to have the dates I have entered before,
However the dates shown are 1900.
Any idea why is this happening?
I appreciate your help.
Thank you. Query:
Drop table AccountReceivable GO --BEGIN TRANSACTION Create table AccountReceivable ( AccountRecID int identity (1,1) not null, PatientID int not null, PresentCharges int default 0 not null, PaymentMade money default 0 not null, PreviousBalance money default 0 not null, BalanceDue money default 0 not null, LastPaymentDate datetime not null, PresentDate datetime default GetDate() not null ) GO ALTER TABLE AccountReceivable ADD CONSTRAINT PK_AccountRecID Primary Key (AccountRecID) GO
ALTER TABLE AccountReceivable ADD CONSTRAINT FK_PatientID_PatientID FOREIGN KEY (PatientID) REFERENCES PATIENT (PatientID) GO --COMMIT --query to find delinquent accounts --DATEDIFF (d, LastPaymentDate, PresentDate)
--Populate the Accounts Table DELETE AccountReceivable GO INSERT AccountReceivable (PatientID,PresentCharges,PaymentMade,PreviousBalance,BalanceDue,LastPaymentDate,PresentDate ) VALUES (913235,451.34,50,0,401.34,4/7/2006,DEFAULT) GO INSERT AccountReceivable (PatientID,PresentCharges,PaymentMade,PreviousBalance,BalanceDue,LastPaymentDate,PresentDate) VALUES (918035,109,109,0,0,3/6/2006,DEFAULT) GO INSERT AccountReceivable (PatientID,PresentCharges,PaymentMade,PreviousBalance,BalanceDue,LastPaymentDate,PresentDate) VALUES (914235,279,89,0,190,5/9/2005,5/9/2005) GO INSERT AccountReceivable (PatientID,PresentCharges,PaymentMade,PreviousBalance,BalanceDue,LastPaymentDate,PresentDate) VALUES (914235,0,90,190,100,5/9/2005,DEFAULT) GO INSERT AccountReceivable (PatientID,PresentCharges,PaymentMade,PreviousBalance,BalanceDue,LastPaymentDate,PresentDate) VALUES (912224,67.90,67.90,0,0,2/2/2006,DEFAULT) GO
I have a text file which has rows 7 rows.I want to insert the data into SQL table using ssis In text file we have a column which has values as Y or N...I wanted to take only those rows which are Y...But we have only 6 rows in SQL table.It does not have the column with Y or N.
When the value of Downtime is greater than 0:00:10 I would like to have the background of that cell to be Red and its font bold. How to accomplish this in query?