SQL Server 2012 :: XML File Insert Into A Table Field
Aug 31, 2015
I have been tasksed to create a data table and stored procedure to extract a special formatted XML file that is an attachment with a standard XML envelope. The XML file is an attchment in a node within the XML wrapper. There are other MIME files (pdf's ) that are handle by a seperate procedure. But I need to just extract the XML file attached along with those and put it into the datable with some other PK?FK fields.
Is a blob the best datatype. How to I insert that XML file into it?
View 2 Replies
ADVERTISEMENT
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
Jul 22, 2013
Overall goal: Write a Bulk Insert statement using the UNC path of a filetable directory.
Issue: When using the UNC path of the filetable directory in a Bulk Insert Statement, receiving "Operating system error code 50(The request is not supported.)" Looking for confirmation as to whether this is truly not supported.
Environment: SQL Server 2012 Standard. Windows Server 2008 R2 Standard
View 9 Replies
View Related
Apr 3, 2015
I am unable to load data from flat file to sql table using bulk insert sql statement
My code:-
DECLARE @filePath VARCHAR(200)
DECLARE @sql VARCHAR(8000)
Declare @filename varchar(100)
set @filename='CCNVZ_150401054418'
SET @filePath = 'I:IncomingFiles'+@FileName+'.txt'
[Code] .....
View 1 Replies
View Related
Aug 5, 2007
I have the following query in sql 2005:
PROCEDURE [dbo].[uspInsert_Blob] (
@fName varchar(60),
@fType char(5),
@fID numeric(18, 0),
@bID char(3),
@fPath nvarchar(60)
)
as
DECLARE @QUERY VARCHAR(2000)
SET @QUERY = "INSERT INTO tblDocTable(FileName, FileType, ImportExportID, BuildingID, Document)
SELECT '"+@fName+"' AS FileName, '"+@fType+"' AS FileType, " + cast(@fID as nvarchar(18)) + " as ImportExportID, '"+@bID+"' AS BuildingID, * FROM OPENROWSET( BULK '" +@fPath+"' ,SINGLE_BLOB)
AS Document"
EXEC (@QUERY)
This puts some values including a pdf or .doc file into a table, tblDocTable.
Is it possible to change this so that I can get the values from a table rather than as parameters. The Query would be in the form of: insert into tblDocTable (a, b, c, d) select a,b,c,d from tblimportExport.
tblImportExport has the path for the document (DocPath) so I would subsitute that field, ie. DocPath, for the @fPath variable.
Otherwise I can see only doing a Fetch next from tblIportExport where I would put every field into a variable and then run this exec query on these. Thus looping thru every row in tblImportExport.
Any ideas how to do this?
View 1 Replies
View Related
Jul 13, 2015
I have a requirement where i have to insert empty string in column whose datatype is decimal.
I have to replace the column value if it is null then insert it as ' '.
Obviously its generate error msg for conversion, is there any workaround for this. I cannot add 0 or other value as this column is used to generate some output value.
IIF(Column1 IS NULL, ' ', Column1))
I used TRY_PARSE but it insert null value if there is conversion error.
View 3 Replies
View Related
Aug 27, 2015
I have a table (ScriptTable) which holds a groupID Nvarchar(10) ,SQLStatement Nvarchar (150)
Table Fields =
GroupID SQLStatement
1234 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'AB123'
9876 Select CUSTNO, CUSTNAME,CUSTADDRESS from custtable where customerNo = 'XY*'
What I need is to take each select statement in turn and add the data into a temp table. I can use any method but it needs to be the most efficient. There can also be a varying number of select statements to run through each time my job is run.
View 6 Replies
View Related
Sep 27, 2012
Is there a way to open EDI file in SQL Server and insert the data into tables?
View 9 Replies
View Related
Nov 9, 2014
I am trying to load a fixed width text file using `Bulk Insert` and a XML format file. I have used the same process and XML file on another fixed width, except with less columns.
Error
Msg 4857, Level 16, State 1, Line 16
Line 4 in format file "PATHCaddr.xml": Attribute "type" could not be specified for this type.
SQL Server Table
[code lang="sql"]
create table [dbo].[raw_addr](
address_numbervarchar(max),
addr_linelvarchar(max),
addr_line2varchar(max),
street_novarchar(max),
[code]....
View 0 Replies
View Related
Dec 23, 2013
I just created a new table with over 100 Columns and I need to populated just the first 2 columns.
The first columns to populate is an identify column that is the primary key. The second column is a foreign_key to an other column and I am trying to populate this columns with all the values from the foreign_key value. This is what I am trying to do.
column1 = ID
column2= P_CLIENT_D
SET IDENTITY_INSERT PIM1 ON
INSERT INTO PIM1 (P_CLIENT_ID)
SELECT
Client.ID
FROMP_Client
So I am trying to insert both an identity values and a value from an other table while leaving the other columns blank. How do I go about doing this.
View 1 Replies
View Related
Oct 1, 2014
I need to auto increment an alphanumeric field in a table.
The process is as follows:
1. First position is static letter C for contact or static letter A for account - field contact_id
2. The following 6 positions are numeric - example of the string would be C004658
3. When new contact is entered, it should look up the highest numeric value (in this case 004658) and increment it by one - resulting in C004659
View 9 Replies
View Related
Apr 9, 2014
Is this a correct syntax to populate a field name PHONES in my CUSTOMERS TABLE
case when(d.phone = (SELECT phone from CALLS where exists(select home_phone, mobile, toll_free from CALLS2) Then 1 END 'PHONES'
View 1 Replies
View Related
Feb 6, 2015
I have a table of "applicants" with unique applicant id and another table "reviews" with reviews which has unique id and Emplid and contains general program name like Math and then may contain 3 addition rows for specific program like Calculus, algebra, geometry etc.
There may or may not be a record for each applicant id in table reviews or there can be 1 or more than one record in reviews based on level of review( General or Specific).
All the general reviews has “Math” as Program_code but if there are more reviews, they can have Program_code like “Cal” , “Abr”, “Geo”
I want to join the tables so I can get all the records from both the tables where Program_code in reviews table is “Math” only.
That is I want to join the table and get all the records from reviews table where the program_code is “Math” only
How can I do that?
View 6 Replies
View Related
Jul 28, 2015
In a t-sql 2012 sql script, I have the following script, that only works for a few records since the value of TST.dbo.LockCombination.seq only contains the value or 1 in most cases. Basically for every join listed below, there should be 5 records where each record has a distinct seq value of 1, 2, 3, 4, and 5. Thus my goal is to determine how to add the missing rows to the TST.dbo.LockCombination where there are no rows for seq values of between 2 to 5. I would like to know how to insert the missing rows and then do the following update statement. Thus can you show me the sql on how to add the rows for at least one of the missing sequence numbers?
UDATE LKC
SET LKC.combo = lockCombo2
FROM [LockerPopulation] A
JOIN TST.dbo.School SCH ON A.schoolnumber = SCH.type
JOIN TST.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID AND A.lockerNumber = LKR.number
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
WHERE LKC.seq = 2
A normal select statement looks like the following:
select * from TST.dbo.Locker LKR
JOIN TST.dbo.Lock LK ON LKR.lockID = LK.lockID
JOIN TST.dbo.LockCombination LKC ON LK.lockID = LKC.lockID
where LKR.number in (000,001,1237)
In case you need the ddl statements for the tables affected here are the ddl statements:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT FOR REPLICATION NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[serialNumber] [varchar](20) NULL,
[type] [varchar](3) NULL,
[locationID] [int] NULL,
[code]...-
View 1 Replies
View Related
Feb 21, 2015
I want to learn if its possible to get ID in trigger and set it to another field.
I can do it by using scope_identity and using update command but I dont want to run another update command.
This is a very heavy loaded system that runs maybe 10-30 transactions on every second and I cannot afford that. I come up with a solution by using sequences but if I could use ID would be better.
View 1 Replies
View Related
Sep 23, 2014
I am finding it difficult to find an example that allows for insertion of additional rows into a table, without dropping the table I'm inserting into. Or inserting specific values. Like this example..
[URL] ....
I have 6 table I am formatting the data to conform to the final table as I'm inserting it into, but none of these examples gives me the example needed. I am using SQL 2012.
<code>
SELECT
CONVERT(VARCHAR(50),[FName]) + ' ' + CONVERT(VARCHAR(50),[LName]) AS [CustName]
,CAST('ALARMCOM' as nvarchar(8)) as VendorName
,CONVERT(VARCHAR(25),[CUSTOMER_CS_ACCOUNT_NUMBER]) AS [Cust_ID]
,CONVERT(VARCHAR(40),[Charge_Description])as [ChargeType]
,CASE
[Code] ....
View 6 Replies
View Related
Apr 20, 2015
I am having 2 tables one is staging temp and another is main import table.
In my staging table there are 3 column Col001,Id,Loaddate
in Col001 column data are present with '¯' delemeter.
I am having function which is used to load data from staging to import table using one function.
this function create a insert statement.
My Existing function
-- Description: To Split a Delimited field by a Delimiter
ALTER FUNCTION [dbo].[ufn_SplitFieldByDelimiter]
(
@fieldname varchar(max)
,@delimiter varchar(max)
,@delimiter_count int
[Code] ....
I am unable to get correct statement with above function.
View 1 Replies
View Related
Oct 2, 2015
In a special request run, I need to update locker and lock tables in a sql server 2012 database, I have the following 2 table definitiions:
CREATE TABLE [dbo].[Locker](
[lockerID] [int] IDENTITY(1,1) NOT NULL,
[schoolID] [int] NOT NULL,
[number] [varchar](10) NOT NULL,
[lockID] [int] NULL
CONSTRAINT [PK_Locker] PRIMARY KEY NONCLUSTERED
[code]....
The locker table is the main table and the lock table is the secondary table. I need to add 500 new locker numbers that the user has given to me to place in the locker table and is uniquely defined by LockerID. I also need to add 500 new rows to the corresponding lock table that is uniquely defined in the lock table and identified by the lockid.
Since lockid is a key value in the lock table and is uniquely defined in the locker table, I would like to know how to update the lock table with the 500 new rows. I would then like to take value of lockid (from lock table for the 500 new rows that were created) and uniquely place those 500 lockids uniquely into the 500 rows that were created for the lock table.
I have sql that looks like the following so far:
declare @SchoolID int = 999
insert into test.dbo.Locker ( [schoolID], [number])
select distinct LKR.schoolID, A.lockerNumber
FROM [InputTable] A
JOIN test.dbo.School SCH ON A.schoolnumber = SCH.type and A.schoolnumber = @SchoolNumber
JOIN test.dbo.Locker LKR ON SCH.schoolID = LKR.schoolID
AND A.lockerNumber not in (select number from test.dbo.Locker where schoolID = @SchoolID)
order by LKR.schoolID, A.lockerNumber
I am not certain how to complete the rest of the task of placing lockerid uniquely into lock and locker tables?
View 7 Replies
View Related
Dec 9, 2014
My xml is in below format:
DECLARE @MyXML XML
SET @MyXML = '<RS>
<R id="6330">
<WF id="71445">
<WFS id="12790"> <fname>John12790</fname> </WFS>
[Code] ....
I need to insert into table with TSQL query:
My output should be similar below:
John12790 12790 71445 6330
Eric 12791 12790 71445 6330
John12793 12793 71446 6331
Eric12794 12794 71446 6331
otherwise i need to write huge c# code to execute such thing..
View 2 Replies
View Related
May 14, 2015
I have a problem described as follows: I have a table with one instead of insert trigger:
create table TMessage (ID int identity(1,1), dscp varchar(50))
GO
Alter trigger tr_tmessage on tmessage
instead of insert
as
--Set NoCount On
insert into tmessage
[code]....
When I execute P1 it returns 0 for Id field of @T1.
How can I get the Identity in this case?
PS: I can not use Ident_Current or @@identity as the table insertion hit is very high and can be done concurrently.Also there are some more insertion into different tables in the trigger code, so can not use @@identity either.
View 5 Replies
View Related
Nov 19, 2013
I wonder if it possible to move data from tables on a linked server to a "normal database"?
Name linked server: Covas
Name table on linked server: tblCountries
Name field: cntCountryName
Name "normal" database: CovasCopy
Name "normal" table: Countries (or dbo.Countries)
Name "normal" field: Country
This is just a test setup. I figure that if I get this working the rest will be easier.
My current query:
select * from openquery(COVAS,'
INSERT INTO CovasCopy.dbo.Countries(Country)
SELECT cntCountryName FROM db_covas.tblCountries;')
View 8 Replies
View Related
Jan 30, 2014
I am trying to insert values in a single table with four columns from 4 different sources. is it possible to run these 4 insertions in parallel. all these insertion are independent of each other
View 3 Replies
View Related
Jan 14, 2015
I have a SP with Parameters as:
R_ID
P1
P2
P3
P4
P5
I need to insert into a table as below:
R_ID P1
R_ID P2
R_ID P3
R_ID P4
R_ID P5
How can I get this?
View 2 Replies
View Related
Mar 28, 2015
Our system runs a SQL Server 2012 DB, it has a table (table_a) which has over 10M records. Our system have to receive data file from previous system daily which contains approximate 3M updated or new records for table_a. My job is to update table_a with the new data.
The initial solution is:
1 Create a table (table_b) which structur is as the same as table_a
2 Use BCP to import updated records into table_b
3 Remove outdated data in table_a:
delete from table_a inner join table_b on table_a.key_fileds = table_b.key_fields
4 Append updated or new data into table_a:
insert into table_a select * from table_b
As the test result, this solution is very inefficient. Step 3 costs several hours, e.g. How can I improve it?
View 9 Replies
View Related
Aug 31, 2015
I have a FileTable as part of an application that a client uses. In general the response of the SQL Server has been great. However, they have started to make use of a part of the application that handles images. The application has a FileTable set up. However, there is a Stored Procedure that retrieves the path of the requested file. It is taking the Server over two seconds to return a single file path.
USE [BMIPictureDB]
GO
/****** Object: StoredProcedure [dbo].[GetFileTablePath] Script Date: 8/31/2015 6:07:37 AM ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetFileTablePath]
[Code] ....
View 2 Replies
View Related
Nov 25, 2007
Can someone tell me how to insert PowerPoint file into SQL Server database?
Thanks,
Peter
View 1 Replies
View Related
Feb 12, 2014
I have created a trigger that is set off every time a new item has been added to TableA.The trigger then inserts 4 rows into TableB that contains two columns (item, task type).
Each row will have the same item, but with a different task type.ie.
TableA.item, 'Planning'
TableA.item, 'Design'
TableA.item, 'Program'
TableA.item, 'Production'
How can I do this with tSQL using a single select statement?
View 6 Replies
View Related
May 20, 2014
I have a table with PO#,Days_to_travel, and Days_warehouse fields. I take the distinct Days_in_warehouse values in the table and insert them into a temp table. I want a script that will insert all of the values in the Days_in_warehouse field from the temp table into the Days_in_warehouse_batch row in table 1 by PO# duplicating the PO records until all of the POs have a record per distinct value.
Example:
Temp table: (Contains only one field with all distinct values in table 1)
Days_in_warehouse
20
30
40
Table 1 :
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20
2 5 30
3 7 40
Updated Table 1:
PO# Days_to_travel Days_in_warehouse Days_in_warehouse_batch
1 10 20 20
1 10 20 30
1 10 20 40
2 5 30 20
2 5 30 30
2 5 30 40
3 7 40 20
3 7 40 30
3 7 40 40
How can I update Table 1 to see desired results?
View 3 Replies
View Related
Apr 24, 2014
I have table A (EmployeeNumber, Grouping, Stages)
and
Table B (Grouping, Stages)
Table A could look like the following where the multiple employees could have multiple types and multiple stages.
EmployeeNumber, Type, Stages
100, 1, Stage1
100, 1, Stage2
100, 2, Stage1
100, 2, Stage2
200, 1, Stage1
200, 2, Stage2
Table B is a list of requirements that each employee must have. So every employee must have a type 1 and 2 and the associated stages listed below.
Type, Stage
1, Stage1
1, Stage2
2, Stage1
2, Stage2
2, Stage3
2, Stage4
So I know that each employee should have 2 Type 1's and 4 Type 2's. I hope that makes sense, I'm trying to change my data because ours is very proprietary.
I need to identify employees who do not have all their stages and list the stages they are missing. The final report should only have employees and the associated missing types and stages.
I do a count by employee to see how many types they have to identify the ones that don't have all the types and stages.
My count would look something like this:
EmployeeNumber Type Total
100, 1, 2
100, 2, 2
200, 1, 1
200 1, 2
So I know that employee 100 should have 2 more Type 2's and employee 200 should have 1 more Type 1 and 2 more Type 2's based on the required list.
The problem I'm having is taking that required list and joining to my list of employees with missing data and pulling from it the types and stages that are missing by employee. I thought I could get a list of the employees that are missing information and right join it to the required list where the missing records would be nulls. But, that doesn't work because some employees do have the required information and so I'm not getting any nulls returned.
View 9 Replies
View Related
May 2, 2014
I've been trying to access the file table shares exposed on a server (I can select, delete, update, etc via SQL) via untransacted access with no luck (the share just sits there doing something when I try to access it, no error message of any kind).
So I thought I'd look to see if there were any open file handles via
SELECT * FROM sys.dm_filestream_non_transacted_handles;
I found there were 10 non transacted handles open, and they've been open for 3 days for automated processes and the files are about 1-2Kb in size.
so I tried to kill them via
exec sp_kill_filestream_non_transacted_handles
that's normally not something that takes very long (in fact when I cleared two for a different database it took just a second or two).
So leaving the stored proc running, I figured I'd connect and fire up Adam Mechanic's sp_whoisactive.
I see the processes to kill the open file handles, with a wait state of FFT_NSO_FILEOBJECT
View 2 Replies
View Related
Jun 6, 2015
how to import a text file with a list of NI numbers into a new table with a column to list all the NI numbers? I think I use the Select INTO clause, but not sure how to do this?
View 1 Replies
View Related
May 25, 2007
Hai Everbody,
for me in my project i want to read data from a csv file and insert it in a sql server databse table.The csv file may contain n number of columns,but i want only certain columns from that, and insert it in the database table.How to achieve this. Plz help me it is urgent. Thanks in advance.
Thanks and regards
Biju.S.G
View 1 Replies
View Related
May 29, 2015
I am looking for a way to convert the following format into a sql table. The format it is Bib Tex.
Essentially a new row in the table would be for each entry, denoted by an @ logo and each column is denoted by an =, as you can see from the example data no one contains all the possible columns and some fields can be over two lines long.
To load this I was considering loading it into a table as each line being a row. Adding a row number, then a column counting the @ signs in order and essentially grouping each record, then for each group running through and looking for the column keywords 'author' , 'title' etc then splitting the data out into those constituent parts using substring and charindex.
@Book{hicks2001,
author = "von Hicks, III, Michael",
title = "Design of a Carbon Fiber Composite Grid Structure for the GLAST
Spacecraft Using a Novel Manufacturing Technique",
publisher = "Stanford Press",
year = 2001,
[Code] ....
View 9 Replies
View Related
