I'm aware of the issues with sizing your logfile growth size too low (causing too many VLFs, etc). But I haven't seen much about the datafile side of it.
Are there any benchmarks specifically on setting datafile growth so low (on databases 1-100Gb in size)? Are there circumstances in well utilized servers where that might be warranted?
From BOL, I see these remarks with respect to the MODIFY FILE subcommand (my underline added):
Initializing Files
By default, data and log files are initialized by filling the files with zeros when you perform one of the following operations:
Create a database
Add files to an existing database
Increase the size of an existing file
Restore a database or filegroup
Which leads me to believe that expanding the size of a datafile will also wipe out (my definition of 'initialize') any existing data within that file.
I may be misunderstanding 'initialize', because when I tested it out, I found this wasn't the case - my table data written to the file was still there after a resize.
Need to clarify to what degree I'd be taking a risk by increasing the file size on a datafile which already has data in it.
As per the old times, do we still need to have the SQL server database's data file and logfiles seprately while we are even using Fusion IO?
In my case, all the drives G and H are from Fusion IO.
So, will it really matter if both my Data and log are on G drive or should I still have them separately on G and H Drives.
A log file size of a production database has been increase from 4gb to 150 gb initial size.Now i want to find when it will grow & how much it grow & which transaction is responsible for this.
View 6 Replies View RelatedI need some clarification about adding file in to mirrored dataabse in primary server without downtime and breaking the mirror server.
In our environment we are using monutdisks in both the servers. in primary for ex we have F drive for data files under mount disk 3 in mirror server also we have same drive but in mount drive2.
As per my knowledge if it is same drives we can add the ndf files in the primary that will reflect on mirror. but in current situation i am confusing about mount points with different names.
I got into confusion while working on DB Growth report for 2012 databases which has compression on.I am analyzing the DB Growth based on MSDB..dbo.backupset table which stores the backup information.
But here it gets tricky, In Previous versions we use "backup_size" column to get actual backup size and estimate the db growth based on the previous all backup file info. But now since compression is on in 2012 the "backup_size" colmuns gives a compressed file size(If i am right) so how do you know the actual backup size to estimate the db growth over a period of time??
While i execute dbcc sqlperf(logspace); I get following values.
Database NameLog Size (MB)Log Space Used (%)
master 16.17969 13.30275
tempdb 7.429688 61.7245
model 0.7421875 45.78947
msdb 5.554688 25.87904
distribution 2808.93 0.8172179
BANKDB 23438.87 48.20037
WSMIRSDB 109.7422 4.839111
For database BANKDB , Log Space used(%) is 48.83% and Log size is about 23438.87 where as my database size of BANKDB is 60 GB. FULL database and Log back is done every day night one time. My database is performing slow now.
Do we need to take log backup frequently like once a 1 hour so that Log space used will be less. Same query is taking more time to execute than before in same database is it because of log file has increased.
I do index organize and rebuild once a week and stats apply nightly.
Is it correct once log space size is increasing more than 10%. Do we need to take log backup?
I am having an issue in determining the correct size of a table.
I have a tableA in some DB on transaction server (Enterprise Edition), this table is being replicated in reporting server DB (Standard edition).
When I check the space used by this table in both the databases i see noticeable difference.
I am using EXEC sp_spaceused 'tableA' to determine the space.
Transaction Server
------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 695416 KB507048 KB182912 KB 5456 KB
Reporting Server
-------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 656904 KB483664 KB172680 KB 560 KB
So I wanted to know what could be the possible reasons for this difference ?
what is the maximum size of a DB hosted on SQL 2012 cloud environment?
View 3 Replies View RelatedIt is possible to find table size and in that table each row size.
View 4 Replies View RelatedI have 10 Gb index and disk space only left 5gb .
How can i rebuild index ?
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
Any good starting point to understand for a specific db, how many max VLFs are good to have so that it does not cause long startup or backup times?
Also, I need some calculation so that I can identify a best growth parameter I will setup for each database ?
I'm seeing the below msg in errorlog and curious to know the changes (right sizing/growth) to be done? As of now 100 MB of log file growth value is set (refer: [URL] ....)
Database BizTalkMsgBoxDb has more than 1000 virtual log files which is excessive. Too many virtual log files can cause long startup and backup times. Consider shrinking the log and using a different growth increment to reduce the number of virtual log files.
Is there any limit to the maximum size of a datafile or transaction log you can have with SQL Server 2000 on Windows 2000. Also is there a maximum size that should be adhered to for performance and admin reasons ?.
View 4 Replies View Related:eek: I am somewhat confused -- I have a database in production that I restored to a QA environment; upon restore, the size has grown by 200MB.
Both production and QA are running SQL2000 -- the only difference is that QA has the latest security hotfixes installed -- version 8.0.0.665 from KB article at the following link:
Q316333 (http://support.microsoft.com/default.aspx?scid=kb;en-us;Q316333&id=Q316333)
i have a database which has a log file size of 10 Mb. it goes into single user mode automatically . i tried to increase the size of file size of log file from 10 mb to 50 mb... but i want to make it only 20 mb ... i am unable to change since it gives a message .cannot decrease the size of the file .. is there another way to decrease the size of log file .....
View 2 Replies View RelatedI inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
We have a nightly application that when run during SQL Backup caused a single table in a 7GB database to increase to 13GB. Total database size reached 20GB when the disk array ran out of space. Table only contained 661,000 records and should have been less than 100MB.
Recently we have moved from SP1 to SP3.
HELP !!!
My DB size was from 500MB to 10GB since 8/1998 to 12/2004. But now is 16GB (from 1/2005 - 5/2005), I don't why the data size growth too fast (as double) ?
View 4 Replies View RelatedWe have a problem with the size of the tempdb.mdf file. The tempdb had grown to 25Gb and consumed all the available disk space. SQL server was restarted and the tempdb was reset back to the default size. The following day the tempdb suddenly increased in size from 200mb to 25GB within a very short space of time. There were a couple of event log entries from sqlservger regarding the lack of disk. Since then the server is running without any problems but the level of free space is virtually zero on the drive with tempdb.mdf file.
What would cause the tempdb to grow suddenly and to this size?
Can I control the size the tempdb can grow to?
SQL 2005 (x64) sp1
W2K3 R2 SP1
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View Related