I have a job under the SQL Server Agent, which is configured to send an email notification on failure.
The job is scheduled to run every 30 minutes.
Is it somehow possible to configure it so that it only sends one email in case of subsequent failures instead of "spamming" my inbox every half hour?
We recently had a problem with DB Mail. SQL jobs that sends an email succeeded but the email in the job fail to sent. There was a problem with the email server. The error is included. We fixed the problem with the email server. How can I get an alert when a DB Mail email fails send?
Date4/23/2015 10:01:06 AM
LogDatabase Mail (Database Mail Log)
Log ID5907
Process ID13204
Mail Item ID5702
Last Modified4/23/2015 10:01:06 AM
Last Modified Bysa
Message
The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-04-23T10:01:06). Exception Message: Cannot send mails to mail server. (Insufficient system storage. The server response was: 4.3.1 Unable to accept message because the server is out of disk space.).
)
I need to send email to the team when the job run completes.
On that server we have two instances one is default (2008R2) and another is 2014 From 2008r2 it will send email to the team.
I tried the profile account using anonymous and enter my company email & password but still the status is showing failed.
I do have smtp account details, I use the same port number but still failing?
I have configured smtp email in MS sql server and configure email to schedular job when schedular jobs become failed. Can i configure email so that email will be sent from scheduler job on both success of job and Failure of job?
View 3 Replies View RelatedI have a Table "Customer" which contain a Field "CreditLimit",
Now I want a Mail alert on change of this filed with both value old credit limit value and New credit limit value.
Is its possible without trigger??
I am implementing a fax solution (Right Fax) and pulling email information from a table and passing into a variable. In order to send out a fax via email, the syntax is in the following example below:
Example:
To send a fax from Outlook to Jane Doe at 555-1212, enter:
[RFAX:Jane Doe@/FN=555-1212]
When the following syntax gets passed into the Send Mail Task, into the "To" line and the package is executed I'm receiving the following.
[Send Mail Task] Error: An error occurred with the following error message: "The specified string is not in the form required for an e-mail address.".
[Send Mail Task] Warning: The address in the "To" line is malformed. It is either missing the "@" symbol or is not valid.
I realize it’s a malformed email address. Is it possible to create a group and instead of the fax syntax pass the group name?
Hello
I have got a script which gives the mail to the dba mail box when database backup fails.
In the script I want to make a change so that I get the particular database name , on what ever database i implement.
Can you tell me some suggestions.
The script I am using is :
use master
go
alter PROCEDURE dbo.SendMail
@to VARCHAR(255),
@subject VARCHAR(255),
@message VARCHAR(8000)
AS
BEGIN
SET NOCOUNT ON;
DECLARE
@rv INT,
@from VARCHAR(64),
@server VARCHAR(255);
SELECT
@from = 'testsql2000@is.depaul.edu',
@server = 'smtp.depaul.edu';
select @message = @message + char(13) + Char(13) + @@servername + '-'+ db_name()+ '-' + 'Backup Status Failed' + Char(13)
EXEC @rv = dbo.xp_smtp_sendmail
@to = @to,
@from = @from,
@message = @message,
@subject = @subject,
@server = @server;
END
GO
--- After the above script is run the following should be given in the 2nd step when
--- the backup jobs are scheduled ------
exec master.dbo.sendmail
@to = 'dvaddi@depaul.edu',
@subject =' Test sqlserver 2000',
@message = '' ;
Thanks
I am sending multiple attachments with database mail for that i have created script to generate file names and send it to mail. Below are my script
DECLARE @MailFile VARCHAR(100)
SET @MailFile = 'Detail_Reimbursement_1_15_'
+ LEFT(CONVERT(VARCHAR, Getdate()), 3)
+ Substring(CONVERT(VARCHAR, Getdate(), 100), 8, 4)
+ '.csv'
[Code] ....
The script is working fine if i manually provided file path to @file_attachments. it is showing error i passes the variable @Loc3 to @file_attachments. Below is the error if i passes the variable to @file_attachments parameter.
(1 row(s) affected)
(1 row(s) affected)
(1 row(s) affected)
Msg 22051, Level 16, State 1, Line 0
Attachment file 'E:DatabaseTannaFinanceReportDetail_Reimbursement_1_15_Aug2015.csv is invalid.
I did tried the encryption on server "A" for database "AdventureWorks2012". Then I tried to restore to server "B". There was the certificate issue, and I thought "of course : it's encrypted ! Let's deactivate it". So here I go "ALTER DATABASE AdventureWorks2012 SET ENCYRPTION OFF".I look at sys.databases : not encrypted.I backup using no encryption, I verify using msdb.dbo.backupset : not encrypted.
I move my backup to my other server where encryption was never configured (so no certificate, nothing...), and I have the error :
Msg 33111, Level 16, State 3, Line 1
Cannot find server certificate with thumbprint '0xFA130E58C999C4919B8975999C83A75A403B11D8'.
Msg 3013, Level 16, State 1, Line 1
RESTORE DATABASE is terminating abnormally.
Is there any automated script available to - "Monitor Database Growth and if any DB is grown by 20%, sending mail alerts"? If not, what is the approach to write the T SQL script ?
View 5 Replies View RelatedAnd have chosen the destination - unstructered (flat) file. But the wizard proposes to export only one table (dbo.Acocount) and all the others from the list are not exported. How can I export ALL the data into one file.I need to do this to edit the syntax in the editor and then import this data and database structure into Postgresql
View 4 Replies View RelatedI have two databases like each other that one is the backup of another. Each DB have 2 filegroups. I want to replace one filegroup from one db to another. How do I do this? Or how do I backup and then restore?
View 3 Replies View RelatedQuery to show logins that don't have any permissions within the SQL instance? I'm tasked with doing some cleanup and have found some cases where the database was deleted or moved to another server but the logins that used it were not deleted. I'd like to identify them to research.
For instance a query to show logins that have no permissions in any of the existing databases would be handy. I'm thinking it would be complicated by the need to loop through all of the existing databases and then outer join it to the list of instance level logins. Going to try to write something like that but was hoping that a script already exists.
I have multiple SQL 2008 severs with databases. Also, 1 mirroring server in place.
Since my database count is increasing can i have only 1 mirroring server. Is there any limit of db at mirroring server. I would have approx. 150 databases.
I want to Replace The Big Log database with A new one ( A database with same structure).But current DB has many connection .
This is my plan :
1- Create a new database with same structure.
2- Rename current database to olddb with this code :
USE master
GO
EXEC sp_dboption CurDataBase, 'Single User', True
EXEC sp_renamedb 'CurDataBase', 'OldDataBase'
GO
3- Rename Newdb to current DB.
USE master
GO
EXEC sp_renamedb 'NewDataBase', 'CurDataBase'
is it true ? and Tsql code is ok ? (dont forget many of connection to curdatabase (that Is a log db) and loss some seconds data is not problems)
My database went into suspected mode. and after we had run some script, it came out from the suspected mode. but we encountered this error while opening table in database.
2009-11-02 15:46:42.90 spid51 Error: 824, Severity: 24, State: 2.
2009-11-02 15:46:42.90 spid51 SQL Server detected a logical consistency-based I/O error: incorrect pageid (expected 1:43686; actual 0:0). It occurred during a read of page (1:43686) in database ID 23 at offset 0x0000001554c000 in file 'H:MSSQL.SQL2008MSSQLDATAmy_db.mdf'.
Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
I tried to copy db from server to server by sa user ( sql login) but this error raised and the copy failed
Executed as user: NT ServiceSQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 9:55:24 AM Progress: 2015-05-11 09:55:24.45 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task Task just started the execution.: 0% complete End Progress Error: 2015-05-11 09:56:31.87 Code: 0x00000000 Source: 10_32_0_201_10_32_0_202_Transfer Objects Task
An error occurred while transferring data. See the inner exception for details. StackTrace: at Microsoft.SqlServer. Management. Smo. Transfer. TransferData()The Execution method succeeded, but the
[code]....
number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. End Warning DTExec: The package execution returned DTSER_FAILURE (1). Started: 9:55:24 AM Finished: 9:56:32 AM Elapsed: 67.892 seconds. The package execution failed. The step failed.
Is there a better way to deal with the virtual log files?...I see several approaches in dealing/decreasing the virtual log files for a database..want to know what's the best n safest approach, from the masters here?
View 9 Replies View Relatedin my environment I am running the SQL Server agent job.i am getting below message.
create a master key in the database or open a master key in the session before performing this operation” error
I have an environment with MS-SQL Server 2014 and always-on availability group configured (on 2-nodes).
I'm writing a Powershell Script which removes the database from the availability group (on the primary server) and then SHOULD drop the database on the secondary Server.
That works most of the time, but not always...
When it fails I get the error message:
Cannot drop database "Customer_2" because it is currently in use.
When i check the secondary DB-Server (sp_who2) while the script is running, i see that there is a process for the DB "Customer_2" with Status="background", Command="DB STARTUP" and LastWaitType="REDO_THREAD_PENDING WORK".
As soon as the script fails, this process for "Customer_2" disapears.
This happens always only on the second database in the availability group.
Why is the process still there, even after I removed the database from the Availability Group on the primary node.
If I remove the database from the availability group manually, the "background" process on the secondary node for that database disappears..
[URL]
1) We are providing a e governance solution for an organization,where we are providing a centralized database,Client have provided 5 Database server for the same.how can we position the Database Server? there are 5000 Concurrent users and 25000 users,SAN Storage for approx. 60 TB,Database size of 2 TB and growth of 1 TB every year
2) How many instance can we have for above said Case?
3) How much RAM Required ?
We are in web site development company,Previously we don't have proxy configuration, after implementing Proxy , we have an issue to connect a remote database.
The error pops "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. Error 53".
I am actually very new to SQL databases, I have received an .MDF and .LDF for a database of size 50 GB...
I need to create or attach these files to a new database and extract some columns then convert them to .text or .csv...
I've got reporting services on a different box from the database and I can see all the reports, but when I try to setup a subscription, I get this weird error:
The SQL Agent service is not running. This operation requires the SQL Agent service. (rsSchedulerNotResponding)
The same error happens when I connect to the database server via management studio and try to run a job.
I can confirm that SQL Agent service is running.
While doing the restore of the database is it better to copy the backup file locally and restore or restore from the network path is good option?
What kind of the problems we may get restoring the backup from the network path?
is there a way to backup all stored procedures in a database?
View 4 Replies View Relatedhow to identify the data leakage in a database , as I heard in one of my environment?
what is the meaning for data leakage ?
We have a 2 node clustered instance(SQL 2014) with 26 databases and we would like to enable alwayson for one of the databases for reporting (only one secondary and do not need high availability setup). I'm thinking if the reporting application/queries can explicitly connect to the secondary database(Instance namedatabase name) without using a listener and setup the secondary in asynchronous commit mode. Read about the REDO thread blocking due to reporting workload. How does this affect if I implement the secondary in this way.
View 3 Replies View RelatedCopy mssqlsystemresource.mdf of a recently upgraded server and paste to an old server have same effect of upgrading via .exe installation?
My idea is to save time and administrative efforts in upgrades (Service Packs and/or Cumulative Updates) using this method.
According to BOL:
The Resource database makes upgrading to a new version of SQL Server an easier and faster procedure. In earlier versions of SQL Server, upgrading required dropping and creating system objects. Because the Resource database file contains all system objects, an upgrade is now accomplished simply by copying the single Resource database file to the local server.
I have SQL 2014. When I try to restore a user database using SSMS GUI, the Restore Database Pop up box never pops up. This happens for any database on this server at any time. Sometimes I get the pop up, some times I dont get.
So I tried to click on Databases on Top and Restore Database, and then select the db that I need to restore from Drop down, then it shows "creating restore plan selecting backups" but it takes forever.
We have full backup and trn log backups every 30 mins. So is it trying to get all these backup files in the background causing this issue? If yes then how to overcome this?
I would like to know what happens if i shrink the database with truncate only option and do a full backup or transaction log backup ? are the full backup or transaction log backup valid? I know that the performance of the database is bad if i shrink the database. What happens to full backup or transaction log backups?
View 9 Replies View RelatedHow to run the profiler on always on read only database to troubleshoot an ssrs issue ?
View 0 Replies View RelatedI am having an issue in determining the correct size of a table.
I have a tableA in some DB on transaction server (Enterprise Edition), this table is being replicated in reporting server DB (Standard edition).
When I check the space used by this table in both the databases i see noticeable difference.
I am using EXEC sp_spaceused 'tableA' to determine the space.
Transaction Server
------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 695416 KB507048 KB182912 KB 5456 KB
Reporting Server
-------------------------------------------------------------------------------
name rows reserveddata index_size unused
TableA1439999 656904 KB483664 KB172680 KB 560 KB
So I wanted to know what could be the possible reasons for this difference ?