I ran the Upgrade Adviser Report on a Server and it identifies the Proxy's as being deprecated.
What action is needed?
Object Type: ProxyObject Name: sa-apro-cms
Object Type: ProxyObject Name: sa-apro-payroll
Object Type: ProxyObject Name: sa-pi-sql-agent
I have a SQL Server 2008 instance that is running on "LiveServer" our production database (ProdDB) - and we need to upgrade to 2014. In order to do some upgrade testing, I spun up a VM with the same version of SQL server on the test VM (TestServer), did a backup of the production DB from the live server, and restored it to TestServer under a different name (ProdDBUA).
I then installed SQL2014 Upgrade advisor onto TestServer, and ran it, checking all the boxes (reporting services etc..) and it all came back clean - no issues whatsoever - not a single warning even. I'm under the impression that stored procs/functions etc... all reside within the DB, so a backup will include those. Is that correct?
The problem is, I know I have stored Procs, functions and views that use deprecated joins in that LiveServer.ProdDB. What do I need to do/configure/check in order to make sure that the Upgrade Advisor is actually checking through all that T-SQL that has deprecated code? I want to have a list to give to my report writers of procs/functions/views that need to be rewritten prior to the upgrade going live.
If there is a modification that needs to be run on the TestServer.ProdDBUA, a cursor to change the path etc. DB is running in Compatibility mode 90.
I'm trying to do an unattended upgrade of 2014 RTM to 2014 SP1.
It's my first attempt at an upgrade configuration file, and its failing with missing registry entry for database engine service and replication service.
Error in summary.txt is:
The registry key SOFTWAREMicrosoftMicrosoft SQL ServerMSSQL12.MSSQLSERVER2495Setup is missing
That's a valid error, as the registry only has an entry for:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL ServerMSSQL12.MSSQLSERVERSetup
Am I missing something obvious here, or how can this be resolved?
I got into confusion while working on DB Growth report for 2012 databases which has compression on.I am analyzing the DB Growth based on MSDB..dbo.backupset table which stores the backup information.
But here it gets tricky, In Previous versions we use "backup_size" column to get actual backup size and estimate the db growth based on the previous all backup file info. But now since compression is on in 2012 the "backup_size" colmuns gives a compressed file size(If i am right) so how do you know the actual backup size to estimate the db growth over a period of time??
My sa account can not see the tables in the db. but can connect to the server
View 2 Replies View RelatedI know select * into ##tmp1 should work but I get a database connection error.
View 9 Replies View RelatedIs there any way to find Report server database name using T-SQL?
I have SQL server report server instance and authentication credentials.
I can use sys.databases but in case of user had changed ReportDb name at the time of configuration this approach will not work then How I can find?
I am planning to Upgrade from sql server 2008 R2 to SQL 2014.
I ran Upgrade advisor 2014 on the database which i want to upgrade and the result was clean with no issues spotted.
But when i run profiler on 2008 R2 to find events like deprecation final support i see many of those in the DB which are not captured by Upgrade Advisor 2014.
Eg: Deprecation Final support in Profiler trace:SET ROWCOUNT will be removed in a future version of SQL Server.
This was not caught in Ugrade Advisor.If 2014 upgrade Advisor didn't show any issues on a database, Am i good to go with code like SP's, Triggers, Functions etc?
I want to set up a database role so that users can use sp_readerrorlog through SSMS. It does a check on membership in the securityadmin role.
I have tested it and can see you can grant execute on xp_readerrorlog but the SSMS GUI uses sp_readerrorlog.
I thought I could create a user/certificate and add the signature to sp_readerrorlog but it's not permitted (likely because it's not a normal database object).
So the other solution is to add the users to the securityadmin role but then explicitly deny alter any login (best done with a custom server role in 2012+ but otherwise just manually in 2008). I tested this out and it works, I'm not able to alter any logins or increase my own permissions, I also did a check of what's reported from fn_my_permissions(null, null) and it shows minimal permissions like I'd expect.
We implemented Custom authentication with reporting services, everything works fine. At our client's site from one of there computer we did the following :
1- open internet explorer and access http://myserver.com/reportserver/reportbuilder/reportbuilder.application
2- the Report Builder Click once application was successfully downloaded onto the clients computer.
3- client was prompted to enter username and password. Client was able to see the report model and create,save reports to the reportserver.
4- close the report builder and try to access report via http://myserver.com/reportserver/reportbuilder/reportbuilder.application, this time the report builder launches but there is no prompt for username and password, instead it's asking to select a reportserver.
5 - tried selecting http://myserver.com/reportserver, there is not popup to enter username and password and we get the error message "unable to connect to server at http://myserver.com/reportserver , enter a different URL and Try again.
.NET framework 2.0 is installed on the client's machine. Our client can access http://myserver.com/reportserver/ from internet explorer.
Our client machine is behind a proxy server . Could this be caused by the proxy server. Why is report builder not prompting for credentials when launched. It only prompts for credentials the first time (installation). Any idea or anyone encountered this issue. we need a fix, because our client cannot access the report builder...
Chi.
Re: SQL Server 2005
Does the xp_cmdshell proxy account need admin-level permissions on the server?
The reason I ask this is because I keep getting "Access is Denied" errors when trying to run this command as a non-admin:
master..xp_cmdshell dtexec 'some package'
The 'some package' has an "execute process task" which calls a batch file on the server.
If the proxy account is NOT a local admin, the "execute process tasks" fails with an "Access is Denied" error.
If the proxy account is a local admin, it executes fine.
We have given "Everyone" FULL CONTROL of all the folders that are affected by the batch file, and it still does not work.
I am out of ideas at this point. It just does not work unless it's an admin.
Are we missing something here?
Hello Experts,
I have a Report Server when i try to deploy my report on the same server and if i use the Fully Qualified Domain Name in my report path i get the below Error
TargetServerURL : http://jptoclq901.corpusers.net/ReportServer
Error : The request failed with HTTP Status 407 : Proxy Authentication Required (Microsoft.ReportingServices.Designer)
but if i use the TargetServerURL as http://localhost/ReportServer, things do work fine. but company requirement is to use complete path.
Is this a limitation or some way out, any Idea???
Thanks in advance for the help
/Soni
I inherited a lot of Servers to upgrade to 2014 to include an SSRS Server.
The encryption Key was never backed up and it seems that no one knows what the password is?
Do I have to manually load the reports? There are a lot of Reports.
[URL]
I want to use BCP to load data from a text file.
By default, constraints are turned off in bcp, so I use the CHECK_CONSTRAINTS hint.
bcp aborts if ANY of the rows contains a FK violation. No data get loaded.
So if I add the -b 1 batch size option, it loads all data UNTIL the first FK violation, but nothing after that.
I want to load EVERYTHING ... except for the violations. But bcp won't let me. Is there a way?
If I install an instance with Windows Only authentication, and then change it to Mixed Mode, if I enable the sa login, the password has already been set. What is the default? If it's generated, how secure is it? Is the password generated? What algorithm is used for that?
View 9 Replies View RelatedMy sql databases in SQL Server 2014 has the status "suspend" as I saw in SQL Management Studio. I can't restore to serviceable condition sql databases through standard procedures. I need to restore .mdf file.
View 9 Replies View RelatedI am using a monitoring system where I can monitor a numeric SQL result assuming the result is one field and one row.I would like to do this to say monitor the free available space or percentage on say the Master database. DBCC SQLPERF gives me a few columns and results for all databases on the server.
View 2 Replies View RelatedIn our environment applications are using a DNS name which points to the physical server ip address. Now we are planning to move to 2014. We are planning to have servers in different subnets so we will be having two ip adresses for listener. How we can point the DNS to the listener ips? If failover happens can the DNS point to the exact ip address of the listener where it's primary node?
View 1 Replies View RelatedIs there a way to schedule a sql job to run at different intervals
For eg:
The job should run at
7:00 Am
8:00 AM
and then at 10:00 Am
We installed the Sql 2014 in Test server.
We observed frequently
"Process 0:0:0 (0x1e10) Worker 0x00000006B6D341A0 appears to be non-yielding on Scheduler 13. Thread creation time: 12906028806348. Approx Thread CPU Used: kernel 0 ms, user 0 ms. Process Utilization 13%. System Idle 84%. Interval: 70189 ms."
Is it better to run the profiler or performan counter?
What are the filters we have to select in the profiler to monitor the Sql server
I have a SQL server box running 2014 reporting services. I have another server running IIS v8.
I would like to be able to connect to the IIS site and be given the SSRS report browser.
So externally if I browse to [URL], I am presented with the report server interface, the same as if I browse to http://xxx.xxx.xxx.xxx/reports internally.
What are my options?
What is the best approach for a read only copy of a database that is ~ 1TB. The primary database is fed nightly with an ETL process. We are currently trying to duplicate the ETL to read only server but that process is not going well. So we are looking at other options to let SQL make the copy.
The primary database is on a Win12R2 with SQL 12 or 14, a 2 node A/P failover cluster.
The read only copy will be on a Win12R2 with SQL 12 or 14. It is not a requirement to fail over to the read only copy if the primary should go down.
What would best the approach to accomplish the end result?
I did not worked on AVG in sql 2012, what are the possible errors and how to resolve in always on in sql 2012 .
View 1 Replies View RelatedI have 10 databases which are configured as principal in mirroring I need to failover all the databases as part of failover , instead of writing query each database as parner failover, is an script which will generate the databases as principal to failover ?
View 3 Replies View RelatedHow to check the delay in between replicas in AG?
View 3 Replies View Relatedmy 4 GB .OST file is corrupted and i am not able to access my mails and contacts.
View 2 Replies View RelatedI got query from sysproccesses and the result for one spid is : SQLAgent - TSQL JobStep (Job 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61 : Step 1
Which job has this code : 0xF3BDA6DFF9DCF94D81FF97C49EDA7C61
After installing SSMS on some computers - the only way we can get SSMS to run correctly is to run it as the administrator. Is there a way where you don't have to do that? These end users are logging as themselves and have accounts in SQL Server all set up - but SSMS will only launch for them if we right click and select "run as administrator".After doing some digging - it seems that this is a common problem out there.
View 3 Replies View RelatedHave a SQL 2014 install and cannot for the life of me get the maintenance plan to remove old backups. I've tried everything. Rights to the folder where the backups are stored are adequate, extension set in the clean up task is as it should be, etc. Log shows the job ran successfully. Running the command manually shows successful completion, but backups are still not removed.
View 9 Replies View Relatedwhen execute the restore log command, in the messages window it shows how many seconds the restore takes, at the meantime, on the status bar, it also shows the seconds the command takes.
Two values are different and could be very different, please see below examples , restoring takes 1.8 seconds, but in total the command takes 4 seconds to complete, the other one is 8.1 seconds and 12 seconds.
What does SQL Server or Windows do after the restoring?
pic a:
pic b:
I did a xperf, I can see after the restoring is completed, sql server did garbage collect and log write, which just run very quickly, but storage is busy on reading the log file for nearly 2.2 seconds( 4-1.8), and 4 seconds ( 12-8.1) .
pic 1:
pic 2:
see pic 1 above, from 13 to 17, the restore operation is finished, but the storage jump to 100% active to do some reads, only reads no writes. zoom that period shows pic 2, it read 4096 (I don't know the unit size) for about 4 seconds, what does this do?
Data file, log file, backup file are no different drives, but all local drive, the interesting point is the read jumped after restoring, I tested it on different server, same result...
I've got an old version of SQL Server 2008 R2 Developer Edition on an old PC which is failing. I've got a new PC and have put SQL Server 2014 Developer Edition onto it. Now before the old machine completely dies, I've gotten into SSMS on the old machine and did a backup of the databases I want to save. I've moved the .BAK files to where I could get to them from SSMS on the new machine. I've gotten into SSMS and tried to do a restore the database to my new machine. However I'm getting an error that does not make any sense to me.
The database I'm I've backed up is named JobSearch. When I backed it up, that was the only database I had selected. Like I said I copied the .BAK to the new machine. Got into SSMS, told it that I wanted to restore the JobSearch database, telling it where I wanted to put it, and it then immediately fails with a:
"Restore of database 'JobSearch' failed. System.Data.SqlClient.SqlError: Logical file 'VideoLibrary_Data' is not part of the database 'JobSearch'. Use RESTORE FILEISTONLY to list the logical file names."
Well of course VideoLibrary isn't "the logical file". But neither did I select VideoLibrary (which is a database I also want to move, but I'm doing one at a time). So what in heck is going on here? Why is it complaining about a database I haven't even selected to back up? Why, when I check everything on the old machine, it's backing up JobSearch, but on the new machine it sees VideoLibrary?
I am new in SQL Server, What to check ,what action do i need to take while adding a new column to a table.
View 5 Replies View RelatedMessage: Executed as user: NT AUTHORITYSYSTEM. The transaction log for database 'tempdb' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases [SQLSTATE 42000] (Error 9002). The step failed in my sql server agent job i have the above error, this type of errors i got some of multiple jobs.
View 9 Replies View Related