I began recieving the following error message. How can I resolve this?
SQL Server
SQL Server could not find the specified named instance (PINNACLESYS) - please specify the name of an existing instance on the invocation of sqlserver.exe.
thanks,
My apologies...I wasn't for sure where to post an error like this...
Over the last 2 months I have gotten this SQL Server error (twice). All existing processes will continue to work, however no new processes can be created and users cannot connect to the server. This is the exact text of the message in the SQL Server error log.
Operating system error 10038: An operation was attempted on something that is not a socket...
Error: 17059, Severity: 18, State: 0
Error accepting connection request via Net-Library 'SSNETLIB'. Execution continuing.
Error: 17882, Severity: 18, State:
While we can typically just stop SQL Server Service and restart the services...I have found it is best to restart the machine during non-production times to take care of any 'residual' effects of this error.
The SQL Server 2000 SP4 box with Windows 2003 Standard SP1 is well maintained by our I.T. team and it typically will run 4 or 5 months without a reboot.
Thank you...
...cordell...
I have a website that works OK on my local machine when I test it within Microsoft Visual Studio's debugging mode. However now that I have copied it over to a remote server it is failing with an error message of:An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under
the default settings SQL Server does not allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance
Specified)As far as I'm aware I have never used SQL Server with my webpage. All connections to databases are to Oracle with connection strings and providers set up in the webconfig file. The website does however use a login control to recognise authorised users. Does this mean I've unknowingly been using SQL Server (to support the login control) and I therefore need to install this on the remote machine? Or is it something simpler? Wondered if anybody had seen this error message before?
Event Id: 8, Source: SQLCTR60
Type: error, Catagory: None,
DB-Library error - unexpected EOF from SQL server. Conection broken.
I'm working with a small ISP/Hosting company and we set up a development server with NT, Site Server, SQL 6.5, and Site Site Commerce Edition. It has been working fine, but the other night their network guy assigned a new IP address to the NT server.
Now SQL server can't talk to/find the NT server. Any time you try to look at anything in Enterprise Manager, it throws the error:
DBLibrary - Server is unavailable or does not exist...general network error.
We can't figure out how/where to tell SQL Server that NT has a new IP address, and get it all working again.
Any suggestions appreciated...
Hi All,
I'm running peoplesoft 8.8 on MS-SQL 2000 SP4. When I try to access my
peoplesoft application through web and add access some pages, I get some error like "SQL error. Stmt #: 651 Error
Position: 0 Return: 8601 - [Microsoft][ODBC SQL Server Driver][SQL Server]
fetch: The fetch type refresh not allowed with forward only cursors (SQLSTATE
37000) 16911
"
I need to solve this issue at the earliest.
Thanks in Advance,
Aniruddha.
We have use SQL Server 2005 on 64bit windows 2003 server Cluster.
In the application log I noticed the following errors during .
When error occurred , i was copying the 45 GB backup file from this machine to another Network machine over 1Gbps network link.
The sql server database was used by many user. The SQL resorce probably failed in this failover cluster.We could immediately
restart the group.So what could be the cause of the error? anyone has faced this problem ?. Here are the logs in chronology.
Any recommended remedy / parameter change to prevent this further (of course besides not copying full backup file online.
Normally it's done at night in lean times)
------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] CheckQueryProcessorAlive: sqlexecdirect failed
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = HYT00; native error = 0; message = [Microsoft][SQL Native Client]Query timeout expired
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:11 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] printODBCError: sqlstate = 08S01; native error = 0; message = [Microsoft][SQL Native Client]Communication link failure
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
-------------------------------------------------------------------------------------------------
Event Type:Error
Event Source:MSSQLSERVER
Event Category:(3)
Event ID:19019
Date:6/12/2008
Time:10:11:27 AM
User:N/A
Computer:XXX
Description:
[sqsrvres] checkODBCConnectError: sqlstate = 08001; native error = 102; message = [Microsoft][SQL Native Client]TCP Provider: Timeout error [258].
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 4b 4a 00 40 01 00 00 00 KJ.@....
0008: 08 00 00 00 53 00 51 00 ....S.Q.
0010: 4c 00 43 00 4c 00 55 00 L.C.L.U.
0018: 53 00 00 00 00 00 00 00 S.......
Hi all...
I have a problem with my SQL Server connection.It gives me this error:"The user is not associated with a trusted SQL Server connection"
Please, help tried evrything, really desparate.
Regards
Sebabs(babiA@webmail.co.za)
Hi there,
I access to server SQL by an application on web,I configured the ODBC box for using TCP/IP and the server use also the TCP/IP.
I have this message :
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][Named Pipes]Specified SQL server not found.
/medecin/IdentificationAcces/membre_enregistrer.asp, line 108
I don't know why there is Named Pipes in message.
Please help me
thanks in advance
Jalal
I have a SQL server scheduled to replication. This works fine if it has to do that one the sever on the same mechine. If it has to be done to another server, the replication fails with the following error message.
08001[Microsoft][ODBC SQL Server Driver][dbnmpntw]Connectionopen(Createfile())
Does any one know how to fix this.
Any help will be appreciated.
Thank you.
The following function I am trying to design is to INSERT data into a SQL Server 2005 database. It is called from a different function, parse_file();, which is looping through a .CSV file and returning each record as an array to recordInsert();. Here is the function code and SQL syntax
PHP Code:
function recordInsert($rs)
{
$host = 'Driver={SQL Server}; SERVER=SERVER; DATABASE=DATABASE';
$user = 'USER';
$pass = 'PASS';
$conn = odbc_connect($host, $user, $pass);
$query = "INSERT INTO db.table VALUES ( {$rs['MODEL']}, {$rs['PID']}, {$rs['YEAR']}, {$rs['TOTAL_COST']},
{$rs['PARTS_COST']}, {$rs['LABOR_COST']}, {$rs['PROBCD']}, {$rs['FAIL_PART']},
{$rs['FAIL_PART_NAME']}, {$rs['MILES']}, {$rs['PROBLEM']}, {$rs['CAUSE']},
{$rs['REMEDY']}, {$rs['CLAIM_DATE']}, {$rs['APPRV_DATE']}, {$rs['FAIL_DATE']},
{$rs['SOLD_DATE']}, {$rs['UNIT_AGE']}, {$rs['DEALER']}, {$rs['DEALER_NAME']},
{$rs['ST']}, {$rs['ZIP']}, {$rs['CLAIM']}, {$rs['BTC']}, {$rs['PART_2']},
{$rs['PART_3']}, {$rs['PART_4']}, {$rs['PART_4']}, {$rs['PART_5']},
{$rs['PART_6']}, {$rs['JOBCD1']}, {$rs['JOBCD2']}, {$rs['JOBCD3']},
{$rs['JOBCD4']}, {$rs['PRLN']}, {$rs['RUN_DATE']} );";
$exec = odbc_exec($conn, $query);
if(!$exec)
{
echo "Error: " . odbc_error($exec) . "<br />
" . odbc_errormsg() . "<br />
";
}
else
{
echo "Executed.<br />
";
}
}
parse_file("file.csv", csv);
I am receiving the following error when attempting to INSERT into the database.
Code:
[Microsoft][ODBC SQL Server Driver][SQL Server]The name "YFM700RVL" is not permitted in this context. Valid expressions are constants, constant expressions, and (in some contexts) variables. Column names are not permitted.
I have tried googling the error and since it is a long error, it has been hard trying to find an answer. One solution I found (which wasn't a solution) was to add the '@' infront of the variables. It did not work.
Kick in the right direction?
Thanks.
an error has occurred while establishing a connection to the server.when connneting to sql server 2005,this failure
may be caused by the fact that under teh default settings sql server dose not allow remote connectings.(provider:
sql network interfaces,error:26-error locating server/instance specified)
when connect to database,the error message shows up.Help!
Hi I am trying to learn VB 2005 and I am reaching a step in my studies which requires downloading Sql Server 2005. However every time I attempt to download, I receive this error message.
"SQL Server Setup cannot install files to the compressed or encrypted folder: c:Program FilesMicrosoft SQL Server. To continue, make sure that your installation directories are not compressed or encrypted, or specify a different directory, and then run SQL Server Setup again."
I have tried saving it to another folder, this did not help. Somewhere in my search for answers, I came across something that said I needed a strong Sa authentication or password. I did not have a place to store a password in the setup program and when I went to administration password all my fields were blank, so it should not have needed any password. I also tried the link that this error message directed me to and they said they had no further information on this error.
I have exhausted all the leads, a beginner could possibly come across, except you. Please Help!
Hi,
View 16 Replies View RelatedHi,
I frequently receive this error and warning messages, after those the Reporting Server will be halt:
Event Type: Error
Event Source: .NET Runtime 2.0 Error Reporting
Event Category: None
Event ID: 5000
Date: 10/19/2007
Time: 12:50:47 PM
User: N/A
Computer: HODB04
Description:
EventType clr20r3, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435e74, P4 mscorlib, P5 2.0.0.0, P6 4333c8f6, P7 484, P8 24, P9 system.threading.threadabort, P10 NIL.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 63 00 6c 00 72 00 32 00 c.l.r.2.
0008: 30 00 72 00 33 00 2c 00 0.r.3.,.
0010: 20 00 77 00 33 00 77 00 .w.3.w.
0018: 70 00 2e 00 65 00 78 00 p...e.x.
0020: 65 00 2c 00 20 00 36 00 e.,. .6.
0028: 2e 00 30 00 2e 00 33 00 ..0...3.
0030: 37 00 39 00 30 00 2e 00 7.9.0...
0038: 31 00 38 00 33 00 30 00 1.8.3.0.
0040: 2c 00 20 00 34 00 32 00 ,. .4.2.
0048: 34 00 33 00 35 00 65 00 4.3.5.e.
0050: 37 00 34 00 2c 00 20 00 7.4.,. .
0058: 6d 00 73 00 63 00 6f 00 m.s.c.o.
0060: 72 00 6c 00 69 00 62 00 r.l.i.b.
0068: 2c 00 20 00 32 00 2e 00 ,. .2...
0070: 30 00 2e 00 30 00 2e 00 0...0...
0078: 30 00 2c 00 20 00 34 00 0.,. .4.
0080: 33 00 33 00 33 00 63 00 3.3.3.c.
0088: 38 00 66 00 36 00 2c 00 8.f.6.,.
0090: 20 00 34 00 38 00 34 00 .4.8.4.
0098: 2c 00 20 00 32 00 34 00 ,. .2.4.
00a0: 2c 00 20 00 73 00 79 00 ,. .s.y.
00a8: 73 00 74 00 65 00 6d 00 s.t.e.m.
00b0: 2e 00 74 00 68 00 72 00 ..t.h.r.
00b8: 65 00 61 00 64 00 69 00 e.a.d.i.
00c0: 6e 00 67 00 2e 00 74 00 n.g...t.
00c8: 68 00 72 00 65 00 61 00 h.r.e.a.
00d0: 64 00 61 00 62 00 6f 00 d.a.b.o.
00d8: 72 00 74 00 20 00 4e 00 r.t. .N.
00e0: 49 00 4c 00 0d 00 0a 00 I.L.....
Event Type: Warning
Event Source: ASP.NET 2.0.50727.0
Event Category: Web Event
Event ID: 1309
Date: 10/19/2007
Time: 1:05:37 PM
User: N/A
Computer: HODB04
Description:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 10/19/2007 1:05:37 PM
Event time (UTC): 10/19/2007 8:05:37 PM
Event ID: 7998d21610e64b4994cd070082c63d76
Event sequence: 7302
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/Root/ReportServer-1-128372674221484681
Trust level: RosettaSrv
Application Virtual Path: /ReportServer
Application Path: C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServer
Machine name: HODB04
Process information:
Process ID: 1108
Process name: w3wp.exe
Account name: NT AUTHORITYNETWORK SERVICE
Exception information:
Exception type: ReportServerException
Exception message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
Request information:
Request URL: http://hodb04/ReportServer/Reserved.ReportViewerWebControl.axd?ExecutionID=eidr1n55m03smr55uasdkba4&ControlID=ff4568201e0948da9615d136c680ec50&Culture=127&UICulture=9&ReportStack=1&OpType=SessionKeepAlive&TimerMethod=KeepAliveMethodReportViewerControlTouchSession0&CacheSeed=Fri Oct 19 12:55:37 2007
Request path: /ReportServer/Reserved.ReportViewerWebControl.axd
User host address: 172.16.10.12
User: THRIFTYFOODSsruescher
Is authenticated: True
Authentication Type: Negotiate
Thread account name: NT AUTHORITYNETWORK SERVICE
Thread information:
Thread ID: 10
Thread account name: NT AUTHORITYNETWORK SERVICE
Is impersonating: False
Stack trace:
Custom event details:
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Anyone know how to fix those?
I installed Micrsoft Server Desktop Engine from the CD I received in
my ASP.net book. The installation went fine and then I went to the DOS
prompt and did the "setup SAPWD..." and it ran. I restarted my computer and
opened ASP Matrix and went to the Data tab and proceed to connect to
the server. It gave me an error message it couldn't connect.
So I
uninstalled MSDE and made sure the sql2ksp3 folder was gone. So I went
ahead and installed the MSDE again from the CD again and then went to
DOS
to do the setup. It ran through the setup until the very end with 11
seconds remaining and received error message " Setup failed to
configure the server. Refer to the server error logs and setup logs for
more information. I have tried it several times and it always
stops around 11 seconds. I have tried to install the download from
microsoft.com
instead the CD and that didn't work also. So at this point I
am stuck. PLEASE HELP!
I also checked my Registry keys for a file called PendingFileRenameOperations and it wasn't in the registry keys.
If anyone has any suggestions I would appreciate it.
Hi,
Here is the syntax of the connection string within the web.config file:<connectionStrings><clear />
<add name="MyConnectionString" connectionString="Data Source=000.000.000;Initial Catalog=Database Name;Persist Security Info=True;User ID=XXXXXX;Password=XXXXXX;" providerName="System.Data.SqlClient" />
</connectionStrings>
The test page has a GridView in it which uses the connectionstring fron the web.config file.
Error Message:
Hello!
When I start my .aspx with ASP.NET Web Matrix Server, it work, but when i try to start it with IIS I get error message.
TIA,
Misha
I was in the process of installing Microsof Project 2003 when we suddenly decided to move up to Microsoft Project 2007. We removed SharePoint 3.0 and SQL Server 2K so all that is installed on the box is Windows Server 2003 with all Service Packs. During the install of SQL Server 2005, here is the error message we get.
Microsoft SQL Server 2005 Setup
SQL Server Setup failed to execute a command for server configuration. The error was [Microsoft][SQL Native Client][SQL Server]Cannot alter the login €˜sa€™, because it does not exist or you do not have permission.. Refer to the server error logs and Setup logs for detailed error information.
Any help is appreciated.
Thanks,
Ron
Re: SQL Server 2000 Developer Edition
Error message: Setup failed to configure the server
I'm attempting to install SQL Server 2000 Developer Edition on a 2nd workstation in our area for development and practice with having this 2nd workstation as a "local" (test) SQL Server box. The install fails with the above mentioned message. (We have a database running in production on SQL Server 2000 and we need a place to simply copy the database and run tests on it)
The target PC is running WInXP Pro-SP3 and has IIS installed, along with Visual Studio 2005 & .Net framework, etc.
I downloaded it (via MSDN license) and accepted the defaults on the install.
Any feedback is appreciated.
Thanks,
RLN
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
when i try to start SQL SERVER 2005 its give me this ERROR MESSAGE:
"The service did not respond to the start or control request in atimely fashion ,you need administrator privileges to be able to start/stop this servic.(SQLSAC)"
Notes: am login in as system administrator with full previligies,
its was work normally ,but after i made update for windows then this error hapen after windwos repair.
I have Visual Web Developer worked on my computer, but I can't make SQL Server work for data-driven. I have uninstalled and install VWD from http://msdn.microsoft.com/vstudio/express/downloads/default.aspx , the same Error message...... "..unexpected fail to install SQL server...", the copy of Summary.txt as below:
-----------------------------------------------------------------------------------------------------------------------------------------------------------
Microsoft SQL Server 2005 Setup beginning at Sat Jul 28 06:54:25 2007
Process ID : 3324
c:8845baf7ee339eaf6setup.exe Version: 2005.90.3042.0
Running: LoadResourcesAction at: 2007/6/28 6:54:24
Complete: LoadResourcesAction at: 2007/6/28 6:54:24, returned true
Running: ParseBootstrapOptionsAction at: 2007/6/28 6:54:24
Loaded DLL:c:8845baf7ee339eaf6xmlrw.dll Version:2.0.3609.0
Complete: ParseBootstrapOptionsAction at: 2007/6/28 6:54:25, returned false
Error: Action "ParseBootstrapOptionsAction" failed during execution. Error information reported during run:
Could not parse command line due to datastore exception.
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 124
----------------------------------------------------------
writeEncryptedString() failed
Source File Name: utillibpersisthelpers.cpp
Compiler Timestamp: Wed Jun 14 16:30:14 2006
Function Name: writeEncryptedString
Source Line Number: 123
----------------------------------------------------------
Error Code: -2146893813
Windows Error Text: Key not valid for use in specified state.
Source File Name: cryptohelpercryptsameusersamemachine.cpp
Compiler Timestamp: Wed Jun 14 16:28:04 2006
Function Name: sqls::CryptSameUserSameMachine:rotectData
Source Line Number: 50
2148073483
Could not skip Component update due to datastore exception.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "InstallMediaPath" {"SetupBootstrapOptionsScope", "", "3324"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Running: ValidateWinNTAction at: 2007/6/28 6:54:25
Complete: ValidateWinNTAction at: 2007/6/28 6:54:25, returned true
Running: ValidateMinOSAction at: 2007/6/28 6:54:25
Complete: ValidateMinOSAction at: 2007/6/28 6:54:25, returned true
Running: PerformSCCAction at: 2007/6/28 6:54:25
Complete: PerformSCCAction at: 2007/6/28 6:54:25, returned true
Running: ActivateLoggingAction at: 2007/6/28 6:54:25
Error: Action "ActivateLoggingAction" threw an exception during execution. Error information reported during run:
Datastore exception while trying to write logging properties.
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "primaryLogFiles" {"SetupStateScope", "", ""} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupStateScope.primaryLogFiles
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupStateScope"
00D5CFC0Unable to proceed with setup, there was a command line parsing error. : 2
Error Code: 0x80070002 (2)
Windows Error Text: The system cannot find the file specified.
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.InstallMediaPath
Source Line Number: 44
Class not registered.
Failed to create CAB file due to datastore exception
Source File Name: datastorecachedpropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:27:59 2006
Function Name: CachedPropertyCollection::findProperty
Source Line Number: 130
----------------------------------------------------------
Failed to find property "HostSetup" {"SetupBootstrapOptionsScope", "", "3324"} in cache
Source File Name: datastorepropertycollection.cpp
Compiler Timestamp: Wed Jun 14 16:28:01 2006
Function Name: SetupBootstrapOptionsScope.HostSetup
Source Line Number: 44
----------------------------------------------------------
No collector registered for scope: "SetupBootstrapOptionsScope"
Message pump returning: 2
I'm getting the following message from a VB6 program running ADO...
It will process a job then I get the message.... [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find server 'FLDB1' in syssservers. Execute sp_addlinkedserver to add the server to sysservers...
This started to happen after I moved the db from SS2000 to SS2005...
Our db server and sql server instance on that server are both named 'FLDB1'... Do I need to run the above execute sp_addlinkedserver command on the new 2005 server?
Thanks-Dave
We have changed the Network Domain name of a SQL server and restarted before changing any of the settings in SQL server. When we now try to start the SQL server service manager we get the following error
Your SQL server is either corrupt or has been tampered with. Unknown package id please rerun setup
Any suggestions on how to get the SQL server back on line without having to take the server down and changing the Netowrk Domain Name back ??
Cheers
SR
Hi when I am performing a merge replication between my PDA (SQL CE) and SQL I get the above message. There is no information about it anywhere.
Any ideas?
Thanks in advance.
I'm trying to write a query to select various columns from 3 tables. In the where clause I use a set of conditions, but most important condition is that I only want to see all results from the different columns where the ph.ProdHeaderDossierCode contains at least 25 lines of processed hours. I tried this with group by and having, but I constant get error messages on all other columns that I want to see: "is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause". How can I make this so I can see all information I need?
Here is my code so far:
selectph.CalculatedTotalTime,
ph.ProdHeaderDossierCode,
ph.MachGrpCode,
ph.EmpId,
pd.PartCode
fromdbo.T_ProcessedHour ph,
[Code] ....
I am receiving the following error message at bootup: "Your SQL Server installation is either corrupt or has been tampered with (could not open SQLEVN70.RLL)."
My Operating System is: Windows XP Media Center Edition Service Pack 2 (build 2600)
I have tried reloading XP and Windows to no avail.
HELP!
I downloaded this program, and when trying to intall I am receiving an error meesage that there is insufficient disk space to install.
I have 98GB available on C and 107 GB available on D. I am on an IBM Intellistation dual processor 3,08 Ghz with 4GB RAM and 240 GB Disk (those are "G"'s), so I have tons of capacity. This has to be a problem with the .msi - any suggestions?
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I've installed Visual Studio 2005 Professional evaluation edition on both my desktop & on the server to try out the Debugger to be used with my Stored procedures
I got this error message every time i try to 'Step into Stored Procedure' from my desktop to connect to the stored procedure which resides on the Server.
Error message: Unable to Start T-SQL Debugging. Could not attach to SQL Server Process on 'Server1'.The RPC server is unavailable
The 'Step into Stored Procedure' works though if I open the stored procedure directly on the server.
Both my PC and Server has been installed with Remote Debugger and my windows login has been assigned permission to debug on the debugger that resides on the Server and has sysadmin server role on SQL 2005 both on PC and Server.
Can someone tell me what i miss out to debug Stored procedure in the SQL Server 2005 on the Server from my PC?
Thanks in advance.
I need help! When installing SQL Server 2005 Express on one machine, I get an error with the following summary.txt
Machine : xxx
Product: MSXML 6.0 Parser
Product version: 6,10,1129,0
Installed: Failed.
Log file: c:Program Files... (see below)
Error Number: 1625
in log file from above.
MainEngineThread is returning 1625
This installation is forbidden by system policy. Contact your system administrator.
The person trying to install has administration privileges. BTW: The computer shares a wireless internet connection with other computers in the office but the clients or not setup to share data. My user is installing SQL, the data, and app on a single client. The MS Sql Server 2005 express seems to install on all other boxes. Thanks for your time.
Zone: SQL Server 2005
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!