SQL Tools :: Copy / Paste Fails In Management Studio
Mar 29, 2007
After opening Management Studio and doing some editing it is possible to copy/paste things in the query editor. After a while (working in another app) I come back to Management Studio and I can't copy/paste anything anymore. If I try to copy from the results window I get an error message that the clipboard operation did not succeed. If I try to copy from the query editor window it just doesn't copy. I can copy/paste in other apps without a problem.
It is not the clipboard getting full but I can't rule out much else.
View 10 Replies
ADVERTISEMENT
Oct 20, 2014
The installation SQL 2008 R2 Management Tools on a Windows 7 workstation fails with the error, The specified account already exists.
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
[code]...
View 10 Replies
View Related
Apr 5, 2007
I have recently installed the SQL Server Management Studio Express but I do not find Management Tools in order to create scheduled backups and shrinking of the databases. I was under the impression that this should be included in the Management Studio. I use the SQL 2005 Express for smaller customers who run the SQL on a desktop unit. I need a way to backup the data to a server machine for backup purposes. I have uninstalled and reinstalled to no avail.
View 7 Replies
View Related
Apr 23, 2008
I have VS2008 installed. Now, I need to install the SQL server Management Tools, because of tasks I have on SQL server instances which are installed on other servers. I guess a lot of developers are in such a situation. You develop on your own machine, but deploy the final database on a production machine.And you happen to be the manager of those databases too (well, I am)
Now, it seems impossible to install the neccesary tools as I get messages;
The following components that you chose to install are already installed on the machine. To view a report of available options and alternatives click on details (Workstation components, Books Online and development tools 9.2.3042.00)
Then on the Details, it says the following,
Name: Microsoft SQL Server 2005 Tools Express Edition
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Build version check:
Your upgrade is blocked because the existing component is a later version than the version you are trying to upgrade to. To modify an existing SQL Server component, go to Add or Remove Programs in Control Panel, select the component you would like to modify, and then click Change/Remove.
Now, I have no clue of what can be safely removed to allow the installation of the Management Tools. I am afraid that I will end up with a non-working SQL server Express installation which is required for VS2008
What should I do to get these Managment Tools installed on my develop machine?
View 3 Replies
View Related
Jul 28, 2007
Hi,
I am an novice to SQL field, seeking for tools or add-ing to enchance sql studio management, especially for code completion and real-time prompt of erroneous syntax.
More concretely, could you kindly list great third-party tools you have used, and feel worth evaluating.
Reagrds,
Ricky/
View 2 Replies
View Related
Apr 11, 2007
This is not the first install for me but i've noticed that after installing sql server standard 2005 and then i put on sp2 i cannot find my management studio. i don't think that is was ever installed although i did choose to install it. now when i try to install the tools i'm getting the error that they already exist. arghhhh... ? I've looke to uninstall them through the "add or remove programs" but thats a no-go. Any help would be appreciated.
thanks.
(just to add to this my sql database resides on another server so I copied the contents of the dvd over to the server)
View 1 Replies
View Related
Aug 22, 2015
I just installed Management Studio 2016 CP1. Unfortunately, the Database Diagrams branch does not show-up when I expand the individual databases in Object Explorer. Interestingly, they show-up in Management Studio 2008
View 2 Replies
View Related
Apr 24, 2015
I've accidentally done something to my install of Management Studio that is making query editing very difficult. I must have used a weird key combination to enable some feature that is now opening an Intellisense like window with suggested keywords or column names. I've tried every option I can find to disable this and even tried all the <ctrl> key combinations from A-Z to try to turn this off. How to have the editor revert to the "default" behavior as installed?
I've received several replies about disabling Intellisense or changing the Intellisense options and I've already done this to no effect. I've also not installed any 3rd party tools. I was editing queries when the problem began and I think I had hit a <ctrl> or <alt> key combination key that started this problem.
View 4 Replies
View Related
Jun 17, 2015
I have a new Windows 8.1 64-bit machine onto which I have installed everything that I had on my previous Windows 7 machine. Occasionally I like to use the Copy Database Wizard in SQL 2012 to create a copy of a database on my stand-alone laptop before I begin a new stage of development on it. However, I have failed to run it successfully on my new Windows 8 laptop, despite everything apart from the operating system being identical to my Windows 7 machine, on which I never encountered a problem.
do not suggest using backup instead of the Copy Database Wizard, as if something has worked for me perfectly for 15 years I would like to know why it does not work now. The error message that I receive is shown at the end of this message.
The log-on accounts for SQL Server Agent and SQL Server Integration Services 11.0 are NT ServiceSQLSERVERAGENT and NT ServiceMsDtsServer110 respectively, as they were on my Windows 7 machine. All services are running. Why I receive the error stating, "Arithmetic operation resulted in an overflow" for every database that I have tried to copy, including a new database with no tables that I created to see if I still received this error. As I said, the problem relates to trying to copy databases onto the same machine on which the original database exists.
Event Name: OnError
Message: Failed to connect to server XXXXXXX.
StackTrace: at Microsoft.SqlServer.Management.Common.ConnectionManager.Connect()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.OpenConnection(Server& server, ServerProperty serverProp)
InnerException-->Arithmetic operation resulted in an overflow.
[code]....
View 7 Replies
View Related
Sep 24, 2015
I can see a database file in the Data folder which is used by the "sqlservr.exe" process (detected this using Process Explorer) but I cannot a see a database in the list in SQL Server Management Studio.I am sysadmin on the server (also tried with the "sa" account).tried running "USING" statement with no luck.Is there a system view which tells the relationgship between data files and databases?
View 2 Replies
View Related
Dec 1, 2010
I have SQL Server set up on a server and I can't see the Agent in Management Studio.When I check the services it says it is there and started.I have the Enterprise edition installed.it doesn't show when I am on the server itself through Management Studio, however, on my local pc, when I connect to the server through Management Studio, I can see the Agent through there and I have jobs there that run successfully and everything.Its just when I log directly on the box and load up Management Studio.
View 9 Replies
View Related
Aug 20, 2015
We have Microsoft SQL Server Management Studio Version 10.50.2500.0.I change to "Results To Text", and "Display Results in a Separate Tab". Then I restart SQL Server Management Studio; and my settings are gone.Is there a way to save my settings?
View 3 Replies
View Related
Oct 16, 2015
I am backing up a database as follows:
backup database PPLicense to disk = 'D:License.bak'
I have run this 5 times. If I know run this command:
restore headeronly from disk = 'D:License.bak'
I can see 5 entries returned this all looks good. In SQL Management studio I try and restore this database by selecting the file. The Restore Database dialog only shows the last backup set position i.e. position 5 and now the 4 before it. Why is this not showing the 4 previous backups?
I am using SQL Server 2012 SP 2 (Version 11.0.3460).
View 3 Replies
View Related
Dec 13, 2007
I downloaded and performed a full install of SQL Server Express 2008 Nov CTP. It was installed on a fresh installation of Windows Vista Enterprise x64.
During setup, I checked the 'Client Tools' box which has the description:
"Includes management and development tools: SQL Server Management Studio, SQL Server Configuration Manager, SQL Server Profiler, and Database Engine Tuning Advisor"
The installation ran fine with no errors. After install I looked for the Management Studio but couldnt find it anywhere. No SQL Server Profiler or Database Tuning Advisor either. The only tool that appears to have installed is the SQL Server Configuration Manager.
If I check my Start Menu, the only 2008 items that exist are
Microsoft SQL Server 2008 >
Configuration Tools >
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
SQL Server Installation Center
I checked the summary log and everythign PASSED:
Package results:
Passed
Execution statistics:
Exit code: 0x00000000
Exit message: Passed
Package start time: 12/13/2007 14:05:39
Package end time: 12/13/2007 14:09:06
Package install location: c:Program Files (x86)Microsoft SQL Server100Setup Bootstrap
Package initial action: Install
Media source location: Install
Media version: 10.0.1075.23
Machine properties:
Machine name: xxx
Machine processor count: 2
OS version: Windows Vista
OS service pack:
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
Properties provided in package.xml file:
LegalProductName: SQL Server Database Services 2008
Description: SQL Server Database Services 2008
Details: Install for SQL Server Database Services 2008
ProductName: SQL2008
Version: 10
SPLevel: 0
KBArticle: KB876234
KBArticleHyperlink: http://support.microsoft.com/?kbid=876234
Command line arguments provided:
ACTION: Install
INSTANCEIDSUFFIX:
Product features discovered:
Product: SQL2005
Product: SQL2008
Feature status after execution:
Database Engine Services: Passed
Replication: Passed
Client Tools: Passed
Windows Installer logs generated during execution:
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Snac_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Msxml6_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Tools_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlWriter_Cpu64_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_SqlBrowser_Cpu32_1.log
C:Program Files (x86)Microsoft SQL Server100Setup BootstrapLog20071213_1405T60-l3ac207_20071213_1405_Sql_Cpu32_1.log
What is the issue here?
View 18 Replies
View Related
Mar 6, 2007
hey. I need to copy some tables from one database to another. I found a script to do it, but isnt there some way in the management studio to copy the table from one database to another?
thanks
View 1 Replies
View Related
Jul 4, 2007
I have an SQL statement that, when run through SQL Server management studio works fine. However, when I run it on my ASP page, it doesn’t update the data! I have tried both as a stored procedure and as a simple commandText update statement.
All I do is simly update the value of a column based on another column – nothing particularly complex: update customer set dateChanged = System.DateTime.Now.ToString("dd-MMM-yyyy"), CURRSTAT = 'Active',custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END,cust_Changing_To = NULLFROM customers_v WHERE CURRSTAT = 'Changing'
As you can see, nothing that complex. The line that is causing the problem is the case:
custType = case WHEN cust_Changing_To IS NOT NULL THEN cust_Changing_To ELSE custType END
all it does is if another nullable integer column is not null, sets it to the value of that column, else it retains its existing value.
Like I say, this works in Management studio, but I cannot get it to execute programatticaly from an asp page.
No exceptions are being thrown, it just doesn’t update the data.
Any ideas?
Thanks
View 1 Replies
View Related
Apr 4, 2008
I have a stored procedure which is run through MS Access (yuck). It does not appear to fail, but it does not populate certain tables, and is also rather complex. I did not write it, and am trying my best to fix it. However, when I run the same procedure with the same parameters from within Management Studio (database state is the same, I restore from backup before trying out each execution) it populates the tables correctly. I have profiled both executions (from MS and from Access) and it is running with the same NTUsername, and thus the same permissions. The process used to work and then some changes were made to the DB which seem to have broken it from Access. As far as I know, the Access code has not changed, although it may have done so. The proc call from Access uses the same parameters, and does not throw an error, although it does not appear to close the connection to the DB (I'm looking into this). Access uses an ODBC connection to connect to SQL Server.
Any ideas?
View 3 Replies
View Related
May 30, 2007
I can run the following query in Management Studio, but get the error listed below when I run it from the data tab in Reporting Services:
declare @starttime as datetime
declare @endtime as datetime
declare @timezone as integer
declare @date as datetime
set @timezone = 1
set @date = '5/1/2007'
set @starttime = dateadd(hh, @timezone, @date)
set @endtime = dateadd(d, 1, @starttime)
select @Starttime, @endtime from site
Error Message:
TITLE: Microsoft Report Designer
------------------------------
An error occurred while executing the query.
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure.
------------------------------
ADDITIONAL INFORMATION:
The variable name '@starttime' has already been declared. Variable names must be unique within a query batch or stored procedure. (Microsoft SQL Server, Error: 134)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=08.00.2039&EvtSrc=MSSQLServer&EvtID=134&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
What I am trying to accomplish is the ability for users to select which time zone they want the data in the report to display in. To do this, I created a timezone parameter that has the offset from Central Time (which is how all data is stored in our database).
Any help would be greatly appreciated!
View 4 Replies
View Related
Apr 11, 2006
How does one export/copy a database using Microsoft SQL Server
Management Studio Express? At this time, I have an existing
database that I can access and run queries against. However, I
cannot connect to it via Visual Wed Developer 2005 Express. At
this time, I'm getting the following error message with the existing
database:
Login failed for user 'bigide2_gims2'. The user is not associated with a trusted SQL Server Connection.
Next, I'm running everything locally. If anyone can assist, it would be greatly appreciated and thanks in advance.
-Conrad
View 1 Replies
View Related
Aug 23, 2006
Hi,
For some reason I can not cut and past objects in BIDS?
I receive the following error:
TITLE: Microsoft Visual Studio
------------------------------
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects.
------------------------------
ADDITIONAL INFORMATION:
Could not copy object 'XSQL CICDB Synonym' to the clipboard.
(Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
BUTTONS:
OK
------------------------------
Any ideas why?
Thanks!
View 3 Replies
View Related
Apr 25, 2008
Hopefully a simple question: Is it possible to use Maintenance Plans created on SQL Server Management Studio (installed as part of an instance of SQL Server 2005 Standard Ed.) to back up databases running on an instance of SQL Server Express Edition with Advanced Services? I don't need directions, just whether or not it is permitted.
I've been able to create the plans including establishing connections to from SSMS to the the SQL Express instance, but they keep erroring out. I just need to know if this is actually permitted since Maintenance Plans are not available on Management Studio Express Edition.
Thank you in advance for your help.
View 7 Replies
View Related
Mar 6, 2006
Hi,
HOW TO COPY DATABASE & PASTE IN NEW M/c
I have a database on remote SQL SERVER M/c
Now i want to copy the database from remote m/c to my local machine. I have SQL 2000 Desktop edition.
I backup the datatbase from server and when i restore a database in local m/c, error msg comes ::
TITILE : Microsoft SQL-DMO(ODBC SQL State:HY000)
Location : upgraddb.cpp:214
Expression : tableIndex <Array_len(upgradeMap)
SPID: 7
ProcessID:2400
Error 22021:[SQL-DMO]You must be logged in as 'sa', or a member of sysadmin, or a member of dbcreator to
perform this operation.
weather i should install SQL desktop again with any special option or is there any way to copy a database from one m/c
to other .
Knidly help me ..
View 3 Replies
View Related
Nov 2, 2006
hi to all
i want to stop paste in my webpage's textbox
<script type="text/javascript" >
var sSave = "";
function fnBeforeCut() {
event.returnValue = false;
}
function fnCut(id) {
event.returnValue = false;
sSave = id.innerText;
id.innerText = "";
}
function fnBeforePaste() {
event.returnValue = false;
}
function fnPaste(id) {
event.returnValue = false;
id.innerText = sSave;
}
</script>
use this script in html textbox
when asp:textbox
txtcpassword.Attributes.Add("onSelectStart", "return false;")
txtcpassword.Attributes.Add("onPaste", "return false;")use this code
it working fine in intenetexplorer(microsoft)
but not work in firefox
please give me a solution it's urgent
View 4 Replies
View Related
Jul 11, 2007
try copying a connection manager from one package to another
it does not work
e.g. excel connection manager
it loses the name of the connection manager and also the file you are pointing to
so it is basically no different to 'add new connection manager'
also
try copying the name of the connection manager to another connection
select connection, hit F2 (edit) ctrl C,
try pasting!
in order to paste you have to right click on the selected text and select copy from the context menu
this is not a bug
this sloppy, poorly tested software
View 1 Replies
View Related
Mar 16, 2007
Is there a way to copy and paste data into columns when view the table columns?
I would like to be able to copy and paste data from an access database.
TIA
View 3 Replies
View Related
Sep 24, 2007
Can anyone explain why when I copy a data element and attempt to paste it it always appears waaay off screen in my SSIS 2005 package? Why won't it paste where I am right-clicking and telling it to go? I hate having to hunt for the element in the flow.
View 1 Replies
View Related
Aug 21, 2000
Hi,
I have a 44 gig db that I moved to another server via the NT copy and paste method. The db has gotten a little larger, and now NT gets almost to the end, but can not complete -- either starts over completely and just does the last few minutes over and over.
Is there an NT copy and paste limit? Any ideas what the problem is? Is the db mixed up?
Thanks for any help.
Judith
View 4 Replies
View Related
Nov 23, 2004
for debug purposes i tried to copy paste some Query Analyser output into Excel... the data pastes fine, but i can't get the field-names to copy/paste. is there a trick? izy
View 3 Replies
View Related
Aug 2, 2007
I have an excel spreadsheet and I want to transport its data into a table. I have tried copying and pasting but it doesn't work. Any ideas?
View 4 Replies
View Related
Mar 26, 2008
Hi,
I'm trying to copy and paste an 'Execute SQL Tasks' within one of my packages.
I've managed to solve the copy part of the problem by registering the following dlls:
regsvr32.exe msxml3.dll
regsvr32.exe msxml6.dll
However, I can't paste the copied task onto my control flow. When I paste I get the following error:
The designer could not paste one or more executables.
Additional information:
At least one executable could not be pasted correctly.
the executable with the name 'Record Row Count' could not be pasted successfully.
Information about the state of the executable with the name
'Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask,
Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' could not be loaded from the clipboard.
Exception from HRESULT: 0xC0010028 (Microsoft.DataTransformationServices.Design)
Any help getting this fixed would be appreciated.
Tom
View 5 Replies
View Related
Sep 15, 2015
I am using Report Viewer 2013 to display Reports, using rdlc to bind the data in visual studio.
I cannot copy the report data from report viewer? is there any work around for copy ?
Does Copy functionality will be included in feature releases or copy functionality will not be there in report viewer?
View 6 Replies
View Related
Aug 15, 2007
Some more insight into the error I am getting.
It always occurs at the task (control flow) level and never at the component (data flow) level
It always occurs on the 'copy' action.
I have tried all the msxml/registry recommendations to no avail.
once again here are the error details
===================================
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects. (Microsoft Visual Studio)
===================================
Could not copy object 'SQT Drop Create RAWMigDeal RAWBarrier table' to the clipboard.
(Microsoft.DataTransformationServices.Design)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.762&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
at Microsoft.DataTransformationServices.Design.ControlFlowClipboardCommandHelper.InternalMenuCopy(MenuCommand sender, CommandHandlingArgs args)
===================================
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.PersistImpl.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.SqlServer.Dts.Runtime.DtsContainer.SaveToXML(XmlDocument& doc, XmlNode node, IDTSEvents events)
at Microsoft.DataTransformationServices.Design.DtsClipboardCommandHelper.SerializeRuntimeObjects(ICollection logicalObjects)
View 7 Replies
View Related
Mar 4, 2008
I have a server report which made by ssrs 2005, I am using vs 2005 to build an aspx page and call this report which already uses dynamic query. I use parameters and send these to reportviewer with setparameter method. I dont use DataBind and Refresh method. SetParameter is enough to generate Report. When report generates everything is fine. But when i export this report to excel the pictures in this report get smaller to fit in cell height. I used rendering extensions but its same.
try
{
ReportViewer1.ServerReport.SetParameters(paramList);
//ReportViewer1.ServerReport.Refresh();
//ReportViewer1.DataBind();
}
catch(Exception exc)
{
Response.Write(exc.ToString());
}
And i used copy contents of reportviewer and paste it to excel file. There is interesting case here. If this is the first time that i run the report and copy and paste. No image is seen in excel workseet but other report elements is fine. But if i click on refresh button on reportviewer toolbar and report regenerates, i try to copy and paste and it works fine, and if i dont close ie window copy and paste progress works good and i dont need to click on refresh button on each report to copy and paste?
This is so interesting subject, i tried lots of things for example i tried to use databind and ServerReport.Refresh methods maybe it acts like clicking on refresh button but this wasnt the same only difference is it took more time to generate the report.
Any help?
View 1 Replies
View Related
