1. Is there a quick way to find out what port number SQL is listening to? I have 10 instances running on one server and I could find out by going to SQL log but it's bit time consuming.
2. quick way to change the port number?
thanks
Does anyone know how to change the default port number of 1433 to somethinig else?
Thanks!
Hi,
Can anyone tell me how to find out on what port number a paticular sqlserver named instance is running...
thanks..
Hi there,
I want to change the default sql-server port number 1433 to a new one. Can i do that? If yes, how?
Also, i have noticed that there is no port number option in the sql server 2005 management studio login window. So, what if the server has changed its port number?
Any suggestions would be appreciated. thanks
Hello ,
How can i define a different TCP/IP port number , other than the default 1433; to replicate the database over a firewall on the source and the destination servers ? My source servers are SQL SERVER 7.0 with SP3 on Windows NT Server 4.0 and the destination servers are SQL 2000 with SP2 on Windows 2000 .
Where do i have to make changes in SQL server and Windows NT ? And further how secured it is to use this way for security ?
Can i get some on this matter please .
Thanks in advance
Sandra .
hai all,
I need to change the default port number of the SQL server from 1433 to some other port number. i know that it can be done thru SERVER NETWORK UTILITY. Can some one confirm that. It will be helpful.
Also i want to make sure that port to given is free port. how can i find that particular port is free.
Thanking in Advance, awaiting Quick response.
Signing Off
Venkatesh.V
Where - in SQL Server Profiler - can I see the port number that someone has used to connect to a database?
e.g. given the connect string "tcp:MACHINE1INSTANCE7,3045" - where in Profiler does it tell me that the connection is using port 3045? I looked at "audit login" and "existing connection" but I don't see a port number...
Any other SQL/Windows tools that I can use to monitor connections to databases on specific ports?
thanks
Hi,
Are there any one who give a example of SMO or WMI to set SQL Server port number?
How can I configure dbdesigner to connect to a sql server that is listening on a different port number ? For those of you not familiar with debdesigner:
http://fabforce.net/dbdesigner4/index.php
I can connect to a local instance just fine but not to a sql server that is listening on a specific port (named instance)
[edited to add]
it works ! I just had to use the name instance notation
server instance_name
It wouldnt connect with iport_number syntax
hooray !
I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
Hello,I have SQL Server 2000 Enterprise Edition, and I'd like to change thedefault port to something else (we'll use 2033 for this example). I'vetried to connect from another computer on the same subnet using"ServerName:2033" as the server, but it doesn't connect. It will connect ifI change the Server to use the default port and change the server to connectto on the client to "ServerName", but either I"m not referencing the newport number properly or ????Any help you could provide would be great.Thanks In Advance!Rick
View 1 Replies View RelatedHi allI'm struggling to find an answer to this one!We've configured our SQL boxes to run under a different port number,e.g. from 1433 to 4533. This works fine under our Citrix enviornmnetwhere the dsn is configured to use the new port. The problem comes interms of SQL Server management. For example, when you try andconfigure SQL Replication, it is not possible to add the subscriberunless the SQL Servce runs under port 1433, the default port. Thesame goes when you try to add the server as a registered server withinthe Enterprise Manager MMC.Does anyone know how you can configure SQL Server to run under adifferent port number, without naffecting SQL REPLICATION, etc?Many thnaksNikJoin Bytes!
View 2 Replies View RelatedHi All,
I am having an issue with SQL 2005 unattended install, I cannot see where in the template.ini file you can specify the TCP port number for SQL 2005 to listen to I want to change it to a specific port number, I know you can do this in an unattended install on SQL 2000.
Also in an unattended install of SQL 2000 and 2005 is there any way you can specify the database and transaction logs location for new databases to be installed on another drive then the system databases. I know you can change this later in SQL server properties but I wanted this to be done during the install or is there a T-SQL script which can do this after?
Any help on this will be great.
Cheers
Raxso
I have TWO named SQL Server instances (on the same machine) and I need to know the port of each of them, how can I do that? Is it write to check the following:
Which one to take: "TCP Dynamic Ports" or "TCP Port"? and what is the difference between them anyways?Â
Can the two instances (or more)Â on the same machine use the same port?!
Hi,
I want set a specific port number of SQL Server(express) during installation not by Configuration Manager after install.
Is it possible?
Hi all,
I have to create a DSN for SQL-Server. Therefor I use the function "SQLConfigDataSource" from "ODBCCP32.DLL". But the problem is that the SQL-Server does not use the Standard-Portnumber 1433. I've tried to make the DSN with "SERVERNAME xxxx" where xxxx is the Portnumber, sometimes it works, but often it does not. When it does not work, then the Checkbox in the ODBC-Configuration-Tool is checked, so the connection is searching for the standard-port. How can I tell the system that it shall NOT use dynamic configuration?
Thanks for help,
Franz
I can't map other sql servers without creating alias with proper port number on client network utility. Other users using same version of the client tools, MMC, SQL DMF etc. I need to map 70 sql servers on using my client tools.
Any help is appreciated.
thanks,
Is there a way to identify who have changed the SQL port number other than the DBA's?
For example through c2 audit or any other triggers?
How do I populate a SQL Server express 2014 table from an impinj speedway reader via http address and port number...
View 6 Replies View RelatedI have a new named instance (SQL Server 2005 x64 SP2 (Build 3159) Developer edition) setup with dynamic port selection. A default instance was also running on the server prior to the named instance setup.
SQL Server Browser service is running. Remote connections are configured on the named instance. But still remote clients can only connect when the port number is specified after the instance name (servernameinstancename,9999). Without the port number, "error 26 - Error locating Server/instance specified" is thrown.
Doesn't the SQL Server Browser service eliminate the need for clients to specify the port number? What am I missing?
Thanks.
Hello,
We have an SSIS job that runs once a day and sends emails.
For security reasons, IT switched the send-mail porton the smtp server from 25 to a different number (let's say 1234).
So, I changed the SSIS SMTP Connection Manager's smtpServer string to smptserver:1234
However, this does not seem to be working. I keep getting 'Send Mail Failure' error.
Any ideas how to set the port number for sending emails using SSIS?
thanks much,
Muhammad
Cobalt Group
I hope someone can help as I have searched for a solution but been unable to find one as yet.
My problem is that after installing SharePoint V3.0 and amending the Report Server to <ServerName>:8080, as I don't yet wish to use integrated mode, everything works fine except email delivered subscriptions. The URL in the email body referencing the report only puts in <ServerName> etc. omitting the port number :8080. I have tried to find where this URL link is built-up from but have had no luck in the report manager, report services configuration and the config files, does anyone know where I need to look and if possible what I need to amend to have the link include :8080 after the servername portion of the URL. I can copy the URL and manually insert the port address and it works but this defeats the object of automated subscriptions.
Sorry if this is a dumb question but it is giving me a headache at the moment.
All answers gratefully received,
Andy
Basically the question is, which number should I pick?
View 4 Replies View RelatedHello,
I hope someone could help me out here.....
I have set up a new web server in my DMZ. This web server needs to "talk" to an application server located on my LAN. It communicates via a COM + Component.
I would like to keep the access that is open between the DMZ & LAN to minimal, obviously for security reasons. Does anyone know what port is used for COM + communication?
Thank you!
Spootnicks
in SQL 2005, how do you find out what port number SQL is using and how can we change it Static port?
thanks,
Ok,
The Scenario is as follows:
24/7 Production Call Centre server running NT4.0 and SQL 6.5 with all the latest service packs.
SQL mail fails(with dull regularity) and the SQL server services stop.
When the SQL server Services are restarted an error message appears stating that Port 1433 is in use after which nobody can connect via TCP/IP. Obviously the port believes the previous SQL session is still running, and won't release the port to the "New Application requesting it".
On a unix system you can force a port reset so you don't need to shutdown and restart the box. Can you do this from either SQL or NT?
Any solutions would be greatly appreciated the DBA's are 100 Miles from the Servers, so restarts are reliant on other people!
Is there any way that I can avoid using 1433,1434 port on the clustered servers?
I have a active/passive (SQL1-active,SQL2-passive) cluster server and another active/passive cluster (SQL2-passive,SQL1-active).
(Its a Quassi active/active server)
I want to change all the sql server ports to other than 1433 and 1434.
Should I change in the registry
Localmachine-software-microsoft-mssqlserver-client-supersocketnetlib-tcp
or
Localmachine-software-microsoft-mssqlserver-mssqlserver-supersocketnetlib-tcpport
or
anywhere else?
Any suggestions are always welcome
Does anyone have an idea on why when using IP with port 1433 that on the SQL 2000 Server a bind failure happens on port 1433 and are not able to get to the SQL using IP but you can use Named Pipes.
Would greatly appreciate any help.
Walter
I've been diagnosing deadlocks for a last couple weeks at a client site and I understand the KEY: and TAB: locks issues. However, the client recently experienced a series of multi-branch deadlocks for which I can find no information. Attached is the deadlock text from the ERRORLOG. Any help would be much appreciated.
Nick
Did a search on port 1433 but nothing came up in the search.
This question is more geared to DBAs more then SQL developers.
I have a SQL 2000 server on a win2k3 machine. For some reason it will not listen in on TCP port 1433.
Shared memory and Named Pipes do though.
I checked the Server Network Utility and I see TCP/IP listed right under Named Pipes and I see that the default port is 1433.
Any ideas how to get SQL to listen on that port?
Hi Gurus,
Iwant to know PORT number of B on A server.
Iam following the following process to get B PORT number.
1) Loging to server A.
2)Opened SQL Server Configuration Manager.
3)Opened SQL Server 2005 Network Configuration.
4)Opened TCPIP properties of Protocol for B.
5)On that opened IP Address TAB
6)Got PORT number from TCP Dynamic Ports
Am i going n right way.
If not please advice me the right way to get port numbers.
Thanks,
ServerTeam
I'm trying to setup SQL Server 2005 Express to communicate through a non standard port. I can connect to SQLServer on a remote machine using port 1433 when it is set as such but when I change the server to another port and try and connect using SSMSE I can't get through. I'm specifying the ip address and a colon followed by port number to connect.
For example: 123.123.123.123:1234
Any ideas?
----------------------------------
Standing on the shoulders of giants
Not sure how this particular topic should be labeled but I figured I would start here.
I have a third party Time and Attendance program that uses SQL 2000 and IIS on top of Win2003.
It also uses a client side program that sits on an XP box that pulls Time clocks entries than passes that info to the SQL server.
We recently needed to move to a different service, still utilizing the same Time and Attendance program but a different client utility that pulls the Time clocks. Both the client and Time and Attnedants program are developed by the same company.
All that being said the new clock utility cannot connect to the SQL service.
The difference between the 2 utilities is the first utility uses UDP, the second uses TCP and requires port 5405.
Basically the way I€™m seeing things is that the server does not have port 5405 open this also confirmed by the company the wrote the program.
There is no firewall on this server. RRAS is installed but does not have any filters enables which I believe means it will receive and pass all protocols to all ports.
Using a port scan utility it shows port 5405 not to be open
How can I get port 5405 open?