Now, I checked and verified that my backup version of SQL Server is the same as the version installed on the computer I'm restoring too.
I have SQL Server on a production machine that I backed up and want to test a full restore on a dev machine to make sure it will work when I need it to.
Now that I've run the restore command on my tape backup and go to restart the SQL server service I receive:
Configuration block version 0 is not a valid version number. SQL Server is exiting. Restore the master database or reinstall.
I'm afraid I don't understand why this is happening. If the builds are the same, then shouldn't restoring the MASTER database have worked normally and I'd be able to restart the service now?
Well that's pretty much it. I discovered this when I added tables to a database from within VS2K5. The tables are visible in VS but not in the server management studio.To clarify further...I added a db to a website in VS. I then used the server management studio to delete tables from the db. They appear to be gone in server management studio, but are still visible within VS, even after a refresh and shut down/restart of VS.I don't get it. What am I missing here? This is killing me.Any thoughts? The only other thing I can think to add is that I originally created the db in question from within VS2K5. I did nothing I am aware of to make it act differently than any other db. So why it shows up in the server management studio but changes I make aren't consistently maintained between there and VS2K5, I do not understand.TIA - Regards, Joe
I am looking forward to a native 64-bit file-based database solution on Microsoft Windows platform. And I don't know why Microsoft didn't release the native 64-bit solution for JET engine (MDB file).
So, before I using this light-weight and file-based version of SQL Server, I will like to ask the question that the 64-bit version has been put into develop schedule?
I have an sqlserver 2005 Enterprise edition (Evaluation version) installed on one of my servers.It got expired after 180days and now i want to transfer the database that was residing on that Evaluation version sqlserver to a new Development server.
Do we have any way to restore the database from a already expired Sqlserver trail version to a new Development server. I dont want make an upgrade. Please suggest me.
Is there any way to restore a database of higher version to lower version.
E.g. I have created a database in sql server 2012, created some tables & procedures in that.I took Full backup of that database. Can I restore it to sql 2008r2 or any lower version.
I know direct restore is not possible, I have to use either import or export option or generating script,but i want to know is there any easy step to do so.
Since some analysis services features are only available in Enterprise version , I have to upgrade my SQL 2005 server from standard edition to enterpise edition.
So I uninstall originial standard version of analysis service and install a Enterprise version. However, the analysis service is still a standard version after installation.
Is it possible to keep data engine as standard version and install a enterprise version of analysis service?
Hello,I have been searching and reading a lots of information on the microsoft website about the different version of SQL server, but still can not make my decision.In term of performance, is there a real big difference between the workgroup and the standard version? The workgroup is limited to 3 GB of RAM while the standard is unlimited, would that really change the performance if my server has 16Gb or RAM?The price difference is pretty substantial so if could only have to buy the workgroup , it would be better.One more question, regarding the type of licence, my server has 2 processors, could I avoid buying 2 licences and get the Server plus CAL instead. I am using this server to host 4 web-application running on SQL server. Each database is about 15 MB.Thanks in adavance for your advises.Arno
I am wondering if it is possible to change from SQL Server Enterprise Evaluation Version to Developer Version. The reason is because the Enterprise Evaluation version expires after 180 days. So if I create reports and cubes in Enterprise Evaluation I can import them into Developer Edition right? Should I remove the Enterprise Evaluation version after 180 days or leave it then install Developer Edition?
I have tried to attatch a database ,created by SQL server Express within a C# application , in SQL server 2005 Enterprise edition, but the following error message appears:
-----------------------------
TITLE: Microsoft SQL Server Management Studio ------------------------------
Attach database failed for Server 'MEDO'. (Microsoft.SqlServer.Smo)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft SQL Server&ProdVer=9.00.1187.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Attach database+Server&LinkId=20476
An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
The database 'E:X.MDF' cannot be opened because it is version 611. This server supports version 607 and earlier. A downgrade path is not supported. Could not open new database 'E:X.MDF'. CREATE DATABASE is aborted. (Microsoft SQL Server, Error: 948)
------------------------------
so , how can I solve this problem , I need to reed the data resides in the tables of 'X' database , how can I do it?? please help me.
I have an ssis package that downloads a SQL Server 2000 database and restores it to a SQL 2005 server. Ninety-five percent of the time it runs just fine, but every so often the job fails and I get the following set of error messages in the log file. (I have had to delete some of the proprietary information for this message to satisfy my boss like putting in [Database name] in place of the actual name of the database in the error message).
OnError, Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Converting database [Database name] from version 539 to the current version 611. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,Database [Database name] running the upgrade step from version 539 to version 551. OnError,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,The transaction log for database [Database name] is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,RESTORE could not start database [Database name]. OnError,SQL5,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to back up file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file], MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnError,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,-1073548784,0x,Executing the query "RESTORE DATABASE [Database name] FROM DISK = '[Path to backup file]' WITH REPLACE, MOVE 'ASP_Live_Data' TO [Path to MDF file]', MOVE 'ASP_Live_Log' TO [Path to LDF file]" failed with the following error: "RESTORE DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. OnTaskFailed,Restore backup file to DB,,,1/6/2008 2:59:31 AM,1/6/2008 2:59:31 AM,0,0x,(null)
I have received the error message "Package migration from version 8 to version 6 failed".I have developed a SSIS package with Visual Studio 2013 which gives me PackageFormatVersion of 8. I then deploy my package to the ssisdb catalog that is running on a SQL Server 2012, this works fine but when I try to execute the package the error arises…due to SQL Server 2012 has a PackageFormatVersion of 6 and it can’t run something that has a greater version.I haven’t seen any good solution for this but one that would work for me would be to upgrade the Integration Services Server from 2012 to 2014, leaving everything else in 2012 (database, ssms, ssas, ssrs).Would this solve the package format problem? Would I then be able to execute my packages in the ssisdb catalog?
I have the trial version of SQL Server 2005 installed and have setup a couple of databases. This trial version will expire in another few weeks. I recently purchased a copy of the software and want to install it. Will I lose my databases, user info, etc? How do I go about installing without losing anything?
We have a 64bit os machine that we accidently loaded the 32 bit version of sql server on. We now want to upgrade it to 64 bit sql server, but we now have a production database on it. My understanding is that all I have to do is detach the production database, upgrade to 64bit sql server, then reattach the database. Is this really all I have to do?
I started this thread as the last attempt to sort the issue out.
I have an SSIS package that loads data from a .csv file into my database. It works fine on my developer machine. I start it programmatically or from Management Studio or from Visual Studio, and it works. Then I deploy it to the MSDB database on the computer on which it will have its final place. There again I can start it from Management Studio or from Visual Studio (using the source file), and it works. But when I start it programmatically, it just fails telling me:
Package Warnings: Package Errors: The version of component "****" (11773) is not compatible with this version of the DataFlow. Component "component "Derived Column" (13627)" could not be created and returned error code 0x80070005. Make sure that the component is registered correctly. The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Flat File Source;Microsoft Corporation;Microsoft SqlServer v9; (C) 2005 Microsoft Corporation; All Rights Reserved; http://www.microsoft.com/sql/support;1". component "Agreement File" (11773) failed validation and returned error code 0xC0048021. One or more component failed validation. There were errors during task validation.
Maybe the source of the problem is that this machine is a 64-bit one, while the developer machine is 32-bit one. But why does the package run fine when I start it from Management Studio?
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Hello, I installed the SQL Server 2k EnterPrise version and developer version on the same version, and the developer version is an instance "Development". How do I expose both of them to internet? Just open both of them to port 1433? And on the client side, just say IP and IP/Development? Do I need specific set up, will they conflict? Thanks,
The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'C.0.8.54'. the expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. I'm getting this whenever try to access the report server via SSMS, I have tried to upgrade via the Reporting Service Configuration Manager but get an error message similar to above except it says: The database version (C.o.8.54) does not match your Reporting Services installation. This version of the database cannot be upgraded. You must use a different database. Has anyone seen this before? I can create a new database, but don't want to loose all my reports. Any ideas. Oh, not even sure if the backups exist from before this error, I've spent 2 weeks trying to get access to the server so I could try to upgrade, only to get the above results. Thanks for your help, David
I downloaded the 101 Samples installation (i.e. 101SamplesCS.msi) from Microsoft's website, which contains SQL Server database files.
While working with the databases in the "Data Access" samples from the 101 Samples projects, I get the following error:
"Database <mdf_name> cannot be upgraded because its non-release version (600) is not supported by this version of SQL Server. You cannot open a database that is incompatible with this version of sqlservr.exe. You must re-create the database..."
I assume the database files were created with a beta or CTP version of SQL Server 2005. Does anyone know where I can get an updated version of these database files or scripts to update them?
Can I set up sql server 7.0 standard version in cluster enviorment, what the different betwent sql server 7.0 enterprise version and standard version? any problem I may encouter when I install the SQL server 7.0 standard version in Cluster enviorment? Thank you very much. Judy
We have a Sqlserver 2005 Installed on One of our servers.I wanted to know whether the installed database is a Evaluation copy or Licensed Copy.How to Evaluate this. Do we have to check any Log files etc for knowing whether it is evaluation copy or Licensed copy. Please help me Asap. thanks in Advance
We have a static class that makes an HTTPWebRequest to get XML data from one of our vendors. We use this as input to a stored proc in SQLServer2005. When I compile this class and call it from a console application in visual studio it executes in milliseconds, everytime. When I compile it, create the assembly and clr function and execute it in SQLServer, it takes around 14 seconds to execute the first time, then on subsequent requests it is again really fast, until I wait for 10 seconds and re-execute, once again it is slow the first time and then fast on subsequent requests. We do not see this behavior when executing outside SQLServer. Makes me think that some sort of authentication is perhaps taking place the first time the function is run in SQLServer? I have no idea how to debug this further. Anyone seen this before or have any ideas?
Here is the class:
Code Snippet
using System; using System.Collections.Generic; using System.Text; using System.Net; using System.IO;
namespace Predict.Services { public static class Foo { public static string GetIntradayQuote(string symbol) { string returnQuote = "";
HttpWebRequest request = (HttpWebRequest)(WebRequest.Create("http://data.predict.com/predictws/detailed_quote.html?syms=" + symbol + "&fields=1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,28,30"));
StreamReader streamReader = new StreamReader(response.GetResponseStream());
returnQuote = streamReader.ReadToEnd();
streamReader.Close(); response.Close();
return returnQuote; } } }
When I run call it from a console app it is fine.
I compile it into a dll and then create the assembly and function as follows:
Code Snippet
drop function fnTestGetIntradayQuoteXML_SJS
go
drop assembly TestGetIntradayQuoteXML_SJS
go
create ASSEMBLY TestGetIntradayQuoteXML_SJS from 'c:DataBackupsCLRLibrariesTestGetIntradayQuote_SJS.dll' WITH PERMISSION_SET = EXTERNAL_ACCESS
go
CREATE FUNCTION fnTestGetIntradayQuoteXML_SJS(@SymbolList nvarchar(max)) RETURNS nvarchar(max) AS EXTERNAL NAME TestGetIntradayQuoteXML_SJS.[Predict.Services.Foo].GetIntraDayQuote
go
declare @testing nvarchar(max)
set @testing = dbo.fnTestGetIntradayQuoteXML_SJS('goog')
print @testing
When I execute the function as above, again, really slow the first time, then fast on subsequent calls. Could there be something wrong with the code, or some headers that need to be set differently to operate from the CLR in SQLServer?
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
I'm chasing after a documetn that was available on one of the Microsoftwebsites that was titled somethign like "MS SQL Server Best Practices"and detailed a nyumber of best practices about securing the server.Included in this was revoking public access to the system tableobjects.Can someone post the URL where I can pick this up, or drop me a note oncontacting them for a copy of the document?
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
I have an SQLServer Mobile database, and I would like to know if there is a way to upgrade it to SQLServer 2005 (.mdf) database. My database has no records in it, just the structure (tables etc). What I am actually asking is if I can create automatically a new SQLServer 2005 Database with the same structure as my existin SQLSErver Mobile database
