SSIS Execute SQL Task Error

Aug 20, 2007

My configuration database is made to work with both SQL Server 2005 and 2000, could this be an error that has to do with that?

Here is the query that I am using...

DECLARE @Server [nchar] (100)
SET @Server = (CONVERT(char(100), (SELECT SERVERPROPERTY('Servername'))))

INSERT INTO [tempdb].[dbo].[Server_Roles] (Server, ServerRole, UserName)
SELECT
@Server,
role.name,
member.name
FROM
sys.server_role_members rm
inner join
sys.server_principals member
ON
rm.member_principal_id = member.principal_id
inner join
sys.server_principals role
ON
rm.role_principal_id = role.principal_id

********Begin Errors***************
" failed with the following error: "Invalid object name 'sys.server_principals'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: Execute SQL Task I
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_role_members'.
Error: 0x0 at Execute SQL Task I: Invalid object name 'sys.server_principals'.

View 4 Replies


ADVERTISEMENT

Help! The Transaction Log Is Full Error In SSIS Execute SQL Task When I Execute A DELETE SQL Query

Dec 6, 2006

Dear all:

I had got the below error when I execute a DELETE SQL query in SSIS Execute SQL Task :

Error: 0xC002F210 at DelAFKO, Execute SQL Task: Executing the query "DELETE FROM [CQMS_SAP].[dbo].[AFKO]" failed with the following error: "The transaction log for database 'CQMS_SAP' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.


But my disk has large as more than 6 GB space, and I query the log_reuse_wait_desc column in sys.databases which return value as "NOTHING".

So this confused me, any one has any experience on this?

Many thanks,

Tomorrow

View 5 Replies View Related

Workflow Error On Execute DTS 2000 Package Task In SSIS

Feb 1, 2008


I have a "Execute DTS Package 2000 " task in SSIS. The SQL 2000 DTS has one task which precedence is "completion". Using SQL2000 it works properly, but when I invoke it from SSIS it doesn€™t respect the precedence. So, when the task above fails it ends the DTS execution.


Is it possible to configure the task to respect the precedences?

View 6 Replies View Related

Implementing Transaction In SSIS Package - [Execute SQL Task] Error: Failed To Acquire Connection &&<ConnectionName&&>.

Jun 30, 2006

I have a simple SSIS package with three "Execute SQL Tasks". I am using ADO.Net Connection to execute SPs on a DB server.

When I execute this package It works fine. So far so good.

Now, I need to implement transation on this package. And problem starts now onwards. When I try to execute package after setting TransationOption = Required for the Sequence container which contains all the tasks, I get following error.

[Execute SQL Task] Error: Failed to acquire connection "NYCDB0008.Export". Connection may not be configured correctly or you may not have the right permissions on this connection.

"NYCDB0008.Export" is the name of the ADO.Net connection. I have been hunting for any solution but all in vain. I have tried changing all DTC settings on the dev as well as Database server.

Please respond if anyone has any solution.

Thanks!

Anand

View 24 Replies View Related

SSIS Execute SQL Task

Jun 26, 2007

Is it possible to CREATE a database using SSIS and name it using a variable / parameter mapping.



if not, how can I use SSIS to take a username from a database table and create a database with that name?



thanks is advance....b

View 10 Replies View Related

Execute SQL Task - SSIS

Sep 12, 2007

A stored function is created in MySQL Server running on Linux with following info:
mysql > delimiter $$
mysql > CREATE FUNCTION GetMaxKeyForSampleTable()
-> RETURNS DOUBLE READS SQL DATA
-> BEGIN
-> RETURN (SELECT MAX(MJD) FROM tblSampleTable);
-> END;
Query OK, 0 rows affected (0.02 sec)
mysql > delimiter ;

***The above function is successfully stored in the database.

"Execute SQL Task" add-in module has following info:

Name: Execute SQL Task
Description: Execute Task
TimeOut: 0
CodePage: 1252
ResultSet: Single row
Connection Type: ADO.NET
Connection: .MySQLServerLinux
SQLSourceType: Direct Input
SQL Statement: SELECT GetMaxKeyForSampleTable() AS MaxKey
IsQueryStoredProcedure: True
ByPassPrepare: False

Result Set:
Result Name Variable Name
MaxKey User:_dMaxKey

The following steps are taken:
1. Clicked "Parse Query" push button which results a pop-up dialog box -
"The query parsed correctly".
2. Clicked "OK" button.
3. Right clicked "Execute SQL Task" add-in module.
4. Selected "Execute Task".

"Execute SQL Task" changed its color from white to yellow to red
which means excution failed.

Please help me to figure out what should be done to make the excution successful.
Thank you very much in advance.

Paul Cho



View 4 Replies View Related

SSIS 'Execute SQL Task' BUG

Jul 23, 2007

Hi



Got a problem with 'Execute SQL Task'. When I click to open the 'Execute SQL Task Editor', add a connection then click on 'Parameter Mapping' then click 'Add' button the window disappears. I have re-installed visual studio and applied SP1 but the problem is still there.



Any Ideas?



Nickie

View 1 Replies View Related

SSIS Execute Package With Execute Out Of Process = True Causes ProductLevelToLow Error

Mar 6, 2008



Hi.

I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.

Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error


Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).

Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).

The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.

Any help would be greatly appreciated.

Thanks

Geoff.

View 7 Replies View Related

SSIS Execute Task Problem

May 8, 2006

Hi!

I want to make an Execute Process Task that will make a connection with VCP.exe (Secure FTP from SecureCRT, you need to install all components from SecureCRT to have this one. It also fixes your system paths so you dont need to include the working directory).

In Expression Window i managed to create an expression that will create the connection string that looks like this:
"vcp.exe -pw password username@222.222.222.222:/home/username/tickets/" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000" + " c:\DATA\" + "grnti_" + RIGHT("0" + (DT_STR, 4, 1252) YEAR( GETDATE() ), 4) + RIGHT("0" + (DT_STR, 2, 1252) MONTH( GETDATE() ), 2) + RIGHT("0" + (DT_STR, 2, 1252) DAY( GETDATE() ), 2) + "0000"

Which forms something like that :
vcp.exe -pw password username@222.222.222.222:/home/username/tickets/grnti_200605080000 c:DATAgrnti_200605080000
Connection string works perfectly while testing in cmd.exe or directly running with Run..., but within SQL SSIS i get the message :

SSIS package "Package.dtsx" starting.
Error: 0xC0029153 at VCP to Srv, Execute Process Task: File/Process "grnti_200605080000" does not exist in directory "vcp.exe -pw password username@222.222.222.222:homeusername icketsgrnti_200605080000 c:DATA".
Error: 0xC0024107 at VCP to Srv: There were errors during task validation.
SSIS package "Package.dtsx" finished: Success.

Now this message seems a bit odd, because im only trying to run an application with all the arguments with it.

Anyone experienced anything similar, or should i use another approach on this one?

Thanks!

Sebastijan L.

Ok ! Problem solved, will keep the thread as it might be usefull to someone else.
I changed the expression from Executable to Argument cut the "vcp.exe" out and it works like a charm!

View 1 Replies View Related

SSIS Execute SQL Task Problem

Feb 19, 2008

I am trying to create an SSIS package to transfer data from one database to another. Prior to transfering the data I want to delete the existing data in the target table. When I try to configure the task I get this message:


The task with the name "Execute SQL Task" and the creation name "Microsoft.SqlServer.Dts.Tasks.ExecuteSQLTask.ExecuteSQLTask, Microsoft.SqlServer.SQLTask, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" is not registered for use on this computer.
Contact Information:
Execute SQL Task

Prior to installing .NET 3.0 I did not have this problem. Any thoughts on how to resolve this problem? My thought is there was an installation registration issue.

Thanks in advance for your help.

scsmith

View 4 Replies View Related

Using Variable In Execute SQL Task In SSIS

Mar 12, 2008



Hi

I need to use a variable as column in SQL statement in Execute SQL task of integration services. I am setting Parameter Setting to map variable use it in the query like; select ? , col1name from tablename. But its not working.
Anybody having any idea; would be of great help.

Thanks,
Salman Shehbaz.

View 3 Replies View Related

SSIS Execute SQL Task Issue

Nov 24, 2007

In my SSIS Package, I have one Execute SQL Task containing a few SQL Statements of the format:
"DELETE FROM <Table_Name>", followed by one SQL statement for executing a stored procedure with an output parameter of the format: "EXEC <StoredProcedure_Name> ? OUTPUT". The output of the stored procedure has been mapped to a global package variable (data type: nvarchar).

If I remove the SQL Statements of the format: "DELETE FROM <Table_Name>" from within the Execute SQL Task, the stored procedure returns the desired output. However, If I introduce these SQL statements in the Task just prior to the "EXEC <StoredProcedure_Name> ? OUTPUT" SQL Statement, the output returned to me always contains a part of the first set of SQL Statements.

Here is a sample output that I get:

"The data corresponding to the ECO: 35053776 has not yet arrived.The data corresponding to the ECO: 35054112 has not yet arrived.
em]

WHERE LEN([ID]) = 12 AND

[ID] LIKE N'100%' AND

[ID] LIKE N'%0';

DELETE

FROM [dbo].[TempECOItem]

WHERE LEN([ID]) = 9 AND

[ID] LIKE N'71%';


EXEC dbo.LoadData ? OUTPUT
"

If you notice, the output that I receive from the stored procedure contains a part of the SQL statements within the Execute SQL Task.

The Execute SQL Task has an OLE DB connection type. I use a "Direct Input" SQL Source Type and my database is a SQL Server 2005 Database. It seems as though the output variable is automatically being set to the SQL Statements in the Execute SQL Task. I even debugged this Package and have found that only at the end of the Execute SQL Task, the variable receives the above value. Prior to this, the variable is empty.

Does anyone know what is going on or, does anyone know of a workaround? Any help would be appreciated.

View 6 Replies View Related

Input Parameter In SSIS Execute SQL Task.

Mar 3, 2007

hi

I would like to create a SSIS package that is going to be called by store procedures.

What i have done so far.

1) I created a Execute SQL task that come with this statement e.g. Seleect * from tblA where BD >= ? and BD =< ?

2) I save this package as a DTSX file and will called it from a proc.

My intention is to pass 2 values when i call the proc. What should do next? any guided tutorial or steps i would be happy. thanks

View 1 Replies View Related

Access Denied When Trying To Execute A Ssis Task

Mar 22, 2006

Hi,

I sometimes come accross this error when I attempt to execute an isolated task in the control flow. What is funny is that I am still able to debug the package.

It eventually resolves after a while. What could it be?

Thanks

Philippe

TITLE: Microsoft Visual Studio
------------------------------

Access Denied. (Exception from HRESULT: 0x80030005(STG_E_ACCESSDENIED))

------------------------------
BUTTONS:

OK
------------------------------

View 7 Replies View Related

SSIS Execute Process Task Problems

Mar 26, 2008



I have a command to decrypt a file that I can run from the command line and it works beautifully. However, when I stuff it into an execute process task, it errors out every time or does nothing.

Here is the command I can run from the command line:

gpg -d --passphrase-fd 0 < c:Dip_Fif.WUZ -o c:Someoutputfile.in1 -r "KeyName" c:Someinputfile.in1.pgp


I've pointed the execute process task object to the gpg.exe executable on my system and am stuffing the remainder in the arguments line. I have also tried changing around all the timeout settings and sucess values. I have found I can change the success value to 2 and it will show up as being green when complete, but the file doesn't decrypt. It just in turn will throw an error on the next piece because the required file is not there.

I will probably end up writing a script to get this to work and use a script task but I really want to know why this will not work.

--Thanks--



View 12 Replies View Related

Issues With Execute Package Task In SSIS

Jun 18, 2007



Hi,



We have used an execute package task in our master package to execute a child package and we have set the execute out of process=false. This master package is running fine in 32 bit server but is failing in 64 bit server. is there any settings to be done in the server or is it the problem with the property setting(execute out of process)



Vivek S

View 11 Replies View Related

SSIS Timeout When Running Execute SQL Task

Feb 28, 2008

Forget it -- I decided to take to crappy way out --
Instead of executing a procedure and trying to get the output when running a SSIS package, I simply run the query in the first step of the SQL Agent Job and fill a table with the results.
All I have SSIS do is export the table to a flat file.



I'm getting the following when I try to run in BIDS:
[Execute SQL Task] Error: Executing the query "dbo.prcCreatePayExtract" failed with the following error: "Query timeout expired". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

It appears that the timeout hits at 30 seconds which I've captured in SQL Profiler but I can't see to find where on earth in the package I can set the timeout. The "Timeout" on the task is set to zero and the Connection Timeout and General Timeout are both zero.


Any help is greatly appreciated,
Sid


View 5 Replies View Related

SQL Server 2008 :: SSIS - Using Variables In Execute Task?

Mar 3, 2015

I have built the following query in SSMS, when I add it to an Execute SQL Task in SSIS. I get this error -

"[Execute SQL Task] Error: Executing the query "SELECT @columnz = COALESCE(@columnz + ',[' + times..." failed with the following error:

"Must declare the scalar variable "@columnz".". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly."

Query:

use design

drop table tmpNCPCNCDownstreamMaxUtilization3wks
select node, max(utilization) as max_Utilization, DATE
into tmpNCPCNCDownstreamMaxUtilization3wks
from stage_ncpcncdownstream_temporal
WHERE Date BETWEEN DATEADD(day, -20, GETDATE()) AND GETDATE()

[code]....

View 1 Replies View Related

SSIS - For Each Loop With Insert In Execute Task Failing

Oct 19, 2015

I have ForEach Loop using Foreach File Enumerator. Within this loop I have SQL Task containing an Insert statement. When I run the Insert statement in query builder the transaction inserts data into a table as expected.

However, when actually running the process I am getting the error message:

Executing the query "INSERT INTO dbo.TEST_TABLE
..." failed with the following error: "Value does not fall within the expected range.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.

I currently have the ResultSet to "None" and have defined the parameter I am using. Where the process seems to joke is on my file_Name variable will I am trying to insert only part of the file name.

My insert statement looks as follows:

INSERT INTO dbo.TEST_TABLE
(IID, AN8, File_Type, IB_OB, File_Name, Processed_Flag, ReceiptDateTime)
VALUES
(
'1111',
'123',
'888',
'IB',
RIGHT(LEFT(?, LEN(?) - 4), LEN(?) - 24),
'I',
GETDATE())

View 0 Replies View Related

Execute SQL Task (SSIS 2005) SP2 And Resultset To A Parameter

Oct 8, 2007



Hello! I would like to write a value from a column to a parameter in SSIS with the Execute SQL task. The problem is that I will never get a value for the parameter.



You can recreate the problem with the AdventureWorksDW sample database.



1. Drop an execute SQL task in the control flow

2. Set the connection to the AdventureWorksDw database

3. Write this in the SQL Statement box Select Max(FullDateAlterNateKey) as LastDate

From DimTime
4. Set the resultset to single Row
5. Under result set assign LastDate as the Result Name and create a parameter with a default date.
6. Execute the task, that will finish succesfully but the value of the parameter in 5 have not changed.

I have tried to change the scope to both the package level and the task level without any success. The value of the variable is still the default value. I have also tried a string variable without sucess.

Any ideas?

Kind Regards
Thomas Ivarsson

View 5 Replies View Related

Passing Parameters To SSIS Execute Process Task

Feb 20, 2008

Hi

Can anyone help me in for the following.

i want to execute a exe file with two variable parameters

Executable : C: empMyExe.exe
Parameter1 : User::Category type is string (below example A)
Parameter2 : User::Amount type is string (below example 1)

in dos it looks like this
c: empMyExe A 1

This will executes fine.

Thanks,
Madhu

View 1 Replies View Related

Execute SSIS Task By Table Column Trigger

Feb 22, 2008



Hi



I have a situation below



Table : tblStatus

Column1 : Event_Desc

Column2 : Flag



Once the flag is set to "T", I want to trigger a SSIS package named "PerformAction.dtsx"



How to write a table trigger for this.

With Regards,
Madhu

View 7 Replies View Related

Capture Errors From SSIS Execute Process Task

Jul 22, 2006

I have an Execute Process Task within my package that executes a BCP command which outputs the resultset of a query to a file in the network share. It works fine most of the time, however sometimes for unknown reasons, the following error message gets logged in my log table -
In Executing "c:Program FilesMicrosoft SQL Server90ToolsBinncp.exe" "Select Comments, SoldToCustomerNbr, ProductGroupingCode, ProductGroupingName, RevSumCategoryCode, RevSumCategoryName, ValidFromDate, DTSCollectPct, DTSPrepaidPct, DTSPickUpPct, DCCollectPct, DCPrepaidPct, DCPickUpPct From ShipmentTypeCustomerBlend" queryout \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt -c -t" " -SDummyServer -T -e"d:SSIS Error LogsJob ExecutionBcpErrors.log" at "", The process exit code was "1" while the expected was "0".

The above error was captured from the System::ErrorDescription variable, by the error event handler, that was attached to the Execute Process Task. This error does not help me to debug the issue.

On running the below statement from the command prompt, i get the actual error message, which is the expected behavior -

"c:Program FilesMicrosoft SQL Server90ToolsBinncp.exe" "Select Comments, SoldToCustomerNbr, ProductGroupingCode, ProductGroupingName, RevSumCategoryCode, RevSumCategoryName, ValidFromDate, DTSCollectPct, DTSPrepaidPct, DTSPickUpPct, DCCollectPct, DCPrepaidPct, DCPickUpPct From ShipmentTypeCustomerBlend" queryout \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt -c -t" " -SDummyServer -T -e"d:SSIS Error LogsJob ExecutionBcpErrors.log"

Expected Error Message -

Unable to open BCP host data-file.

This error message indicates that either the network path - \xxxLOG is not available for the output file creation or the file - \xxxLOGShipmentTypeCustomerBlendLog_060719201440.txt could not be created for some reason.

I 've tried to capture the error message from the StandardErrorVariable and the StandardOutputVariable properties of the ExecuteProcess Task, but in vain.

Is this a bug ? If so, is there a way to get the actual error message from the task ?

Thanks,Reni

View 5 Replies View Related

Confusing Layout In SSIS With Regard To Execute SQL Task.

Feb 22, 2007

I hope someone can help.

I'm trying to read rows from a SQL Server Table and for each row use a few columns as parameters into a query to be run against oracle which will delete oracle rows.

I add OLDEB connections for Oracle and SQL and then I try to add a "Execute SQL Task". I've also tried a "OLE Command" but I can't get the mapping of the columns to the parameters to work.

There is lots of articles on the web that talk in general around parameterized queries but no clear examples.

I also find the difference between the Control Flow and Data Flow tabs confusing as its not intuitive where to place things. It also appears to force me to re-define things that it should already know (this is no doubt because I'm interpreting what I've done / acheived wrongly).

I have my source and destination on the "Data Flow" tab along with a "Execute SQL Task" object in the middle.

I'm setting its "connection manager" the Oracle (i.e. the destination where I want the deletes to be executed). I don't follow why this also has a "connection property, surely this it set when I drag the output of the SQL Server OLEDB Source to the input of the "Execute SQL Task".

Perhaps I'm expected too much from the wizards / dialogs and I have to create "variables" and "parameters" myself?

Any help or suggestions would be very much appreciated.

Thanks in advance

Craig

Scotland

View 3 Replies View Related

Calling Oracle Procedure From SSIS 'Execute SQl Task' Is Not Working

Nov 6, 2007

Hi ,


Iam using 'Execute SQl task' which calls a stored procedure located in sql server database.The task's SQL source type is variable and the variable has the follwoing expression "EXEC PROC_SEL_MBO_REPORT "+@[User::V_SP_Job_Date]after evaluation it is like EXEC PROC_SEL_MBO_REPORT '01/NOV/2007'.It is working fine

Now the procedure is changed to Oracle.So I have changed it to "BEGIN PROC_SEL_MBO_REPORT " + "("+ @[User::V_SP_Job_Date]+")"+"; END"+";" after evaluation it is like BEGIN PROC_SEL_MBO_REPORT ('01/NOV/2007') END;.It is sucessfully executing from the task but no data is loaded into the tables which are used by the procedure internally.
Executing 'execute BEGIN PROC_SEL_MBO_REPORT ('01/NOV/2007') END;' is perfectly alright from SQl developer or sql plus.

Please help me.. thanks in advance

Regards,
GK

View 5 Replies View Related

SSIS 'Execute Process Task' Doen't Open Window

Oct 23, 2006

Hi

I couldn't find an 'SQL Server Agent' Forum , so I'm posting this here...sorry.


I'm using a job to run a batch file with several robocopy commands in it.
The step in the scheduled job runs a SSIS package saved in the Server Package Store.
The SSIS package uses an 'Execute Process Task' control flow item.
The 'Execute Process task' simply calls and execute the batch file. (WindowStyle property = Maximized)
The package/job runs fine in both Visual Studio and in Management Studio. However when run from the latter (SQL Management Studio Job) the command prompt window (dos screen) doesn't open so I can't tell at what stage the batch file is in at any given time.

How can I get the window to open? By the way the window does open if I run the SSIS from Visual Studio.

Thank you

View 1 Replies View Related

Reg: Executing And Passing Arguements To Exe Using SSIS Execute Process Task

Apr 22, 2008

Hi,

Can any one give me a solution how to call exe. Also, i need to pass 1 input to that exe.
I tried using Execute process task but it is not working.

My task is:

I have DFT , it generate a output file then after the output file generated i need to upload it SharePoint server.
So i developed one .exe using .net, C#. ( it is running fine when cmd line)

But i want to embbed in SSIS package.

Like :

DFT ( DataFlowTask) --------------------> OutPutFile.txt

EPT ( ExecuteProcessTask) ----------> Upload it to SharePointPortal.


Kindly give the solution ASAP.

Thanks
Senthil

View 4 Replies View Related

Integration Services :: Using SSIS Execute Process Task To Do Robocopy

May 12, 2015

I am trying to do robocopy of files from one server to another using SSIS package in order to automate and schedule the task.

So, int the Execute Process task editor I put the following

Executable: C:WindowsSystem32Robocopy.exe
Arguments: robocopy SourceServerNameE$BackupTestSource DestinationServerNameE$BackupTestDest
TestSource and TestDest are folder names,

And I want all the files in the source folder to be copied to the destination folder.

I am getting this error when I execute the task: The process exit code was "16" while the expected was "0"

View 6 Replies View Related

Integration Services :: Codes Truncating In Execute Task In SSIS

May 7, 2015

I have tried to incorporate 638 lines sql code inside the Execute SQL Task editor. But it is truncating the codes inside the Execute SQL Task  (SQL command) in SSIS.write all 639 lines of codes in the Execute SQL Task Editor in SSIS.

View 7 Replies View Related

Execute SQL Task: Executing The Query Exec (?) Failed With The Following Error: Syntax Error Or Access Violation. Possible F

Jan 23, 2008

Hi,
I'm having an SSIS package which gives the following error when executed :

Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server

The package has a single Execute SQL task with the properties listed below :

General Properties
Result Set : None

ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False

Parameter Mapping Properties

variableName Direction DataType ParameterName

User::AddLinkSql Input Varchar 0


'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'

When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"

I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.

I would appreciate if anybody can help me out of this issue by suggeting where the problem is.

Thanks in Advance.

View 12 Replies View Related

[Execute SQL Task] Error: An Error Occurred While Assigning A Value To Variable

Jun 20, 2007

hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file

someone can help me ?

thanks

View 4 Replies View Related

[Execute SQL Task] Error: An Error Occurred While Assigning A Value To Variable...

Nov 8, 2006

hi chaps

i m getting the following ERROR:

[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".



i know what the problem is i.e. no row is returned then what is the problem

here you are.... i want to it work... strange... ok i explain...

actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...

I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?



regards,

Anas

View 4 Replies View Related

Execute SQL Task: Error

Feb 18, 2007

I am running a Execute SQL Task which runs a script on a table. It gives me following error:

[Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".

Thanks,

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved