SSIS Package Failing During Bulk Load - Without Useful Error Code
May 4, 2007
I have a dataflow step (flat file -> Sql Server Destination), with a batch size of 2500 records. It fails consistently around 3.6 million records in, with only this error -
[SQL Server Destination [4076]] Error: Unable to prepare the SSIS bulk insert for data insertion.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SQL Server Destination" (4076) failed with error code 0xC0202071. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0202071. There may be error messages posted before this with more information on why the thread has exited.
[Flat File Source [1]] Error: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread1" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread1" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
[DTS.Pipeline] Error: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
How can I debug this further to see what's going wrong?
View 1 Replies
ADVERTISEMENT
Aug 8, 2007
Background€¦
We€™re receiving the data as flat files, when I open up the file in notepad the characters look like the error€™d examples (see below). Open the file up in a texteditor where you can apply code page 1252 it display the characters correctly, which is expected behaviour!
I use SSIS to load these files into my database, applying the correct code page€¦
€¦however the data gets loaded in the incorrect form. Plus the database is collation €˜SQL_Latin1_General_CP1_CI_AS€™ which is code page 1252 so I can€™t see why I am getting these issues.
This is an example of the Umlaut (German chars) issues were getting, they€™re appearing in the database like this€¦.
tuid travelproductid lastname
1741869 6 P€?hls
1792950 6 Sch€žfer
2087798 6 L€?schhorn
2089010 6 Sagemller
2314086 6 Jnger
€¦& should be€¦
1741869 6 Pöhls
1792950 6 Schäfer
2087798 6 Löschhorn
2089010 6 Sagemüller
2314086 6 Jünger
I think it€™s a bug with SSIS, I know having a Unicode file would certainly solve this but I don't have that option.
View 9 Replies
View Related
May 19, 2006
Hello,
I have a big problem and i'm not able to find any hint on the Network.
I have a window2000 pc, VS2005,II5 and SQLServer 2005(dev edition)
I created an SSIS Package (query to DB and the result is loaded into an Excel file) that works fine.
I imported the dtsx file inside my "Stored Packages".
I would like to load and run the package programmatically on a Remote Scenario using the web services.
I created a solution with web service and web page that invoke the web service.
When my code execute:
Microsoft.SqlServer.Dts.Runtime.Application.LoadFromDtsServer(packagePath, ".", Nothing)
I got the Error:
Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
The error message doesn't help so much and there is nothing on the www to give me and advice....
Is it a SSIS problem???
Thank you for any help!!
Marina B.
View 10 Replies
View Related
Jan 23, 2007
I am facing a issue with bulk upload on Test Server.
Issue: When running Openrowset command from SQL server other that Test Server query runs fine when trying to run the same command from Test Server it gives error.
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\ServerNameinputFileName.csv" could not be opened. Operating system error code 5(Access is denied.).
For example: If the command is run from System A connecting to SQL Server instance on Test Server Test Server it gives this error. If the same command with same rights is run from any other SQL server instance say Dev1 its running fine.
If the command is run from Test Server connecting to any SQL Server instance including Test Server it is running fine.
Tried: 1) Given the read/write rights on shared folder, to user under which the SQL server service is running on Test Server
2) Given the read/write rights on shared folder to everyone.
Query:
SELECT DISTINCT * FROM OPENROWSET
(
BULK '\ServerNameinputFileName.csv',
FORMATFILE='\ServerNameFormat.xml'
)
AS FileList
Please provide me with some solution. What can be the reason for such behaviour?
View 22 Replies
View Related
Feb 21, 2007
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
View 1 Replies
View Related
Jun 29, 2015
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1
Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode).
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK
INSERTtbl_ASX_Data_temp
FROM
'M:DataASXImportTest.txt'
WITH
(FORMATFILE='M:DataASXSQLFormatImport.Fmt')
[code]...
View 5 Replies
View Related
Jan 17, 2008
Im having some issues with bulk insert.
This is the table:
CREATE TABLE [dbo].[tmp_GA_status](
[GA_recno] [int] NOT NULL,
[GA_desc] [varchar](40) NULL
)
This is the file (unicode):
1|"test1"
2|"test2"
3|"test3"
4|"test4"
5|"test5"
6|"test6"
7|"test7"
8|"test8"
and this is the sql:
bulk insert tmp_GA_status from 'C: empTextDumpGA_status.dta'
with (CODEPAGE='RAW', FIELDTERMINATOR='|', ROWTERMINATOR='
', DATAFILETYPE='widechar')
so yeah, pretty simple. But whatever I do I get this;
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 1, column 2 (GA_desc).
So what am I doing wrong ?
View 13 Replies
View Related
Jul 17, 2007
Good day all,
I am having an interesting SSIS problem where the package fails to load with the following error message:
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"" from node "DTS: PropertyExpression".
This very same package runs on our test server, but fails to even load on UAT server.
SSIS packages are the same on both Test and UAT servers (I compared not just dates and sizes - they are literally the same: byte-to-byte)
DTExec version is 9.00.3042.00 on both servers.
HKLMSOFTWAREMicrosoftMicrosoft SQL Server90DTSSetupVersion = 9.2.3042.00 on both machines.
This started to happen when the UAT machine was upgraded to Service Pack 2 of SQL Server 2005. Please note that the UAT server only runs SSIS packages and does not have SQL 2005 database engine installed. There is, however, an older installation of SQL Server 2000 on UAT machine (I am not sure if Test machine has it - will check tomorrow).
Any help is greatly appreciated.
Thanks,
Alex
Here is the compete output from DTExec:
Code Snippet
D:AM5Jobs>"C:Program FilesMicrosoft SQL Server90DTSBinnDTExec.exe" /File "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" /Checkp OFF /Cons MT /Set Package.Variables[User::in_ExtractName].Properties[Value];SagittaMapping_Replication /Set Package.Variables[User::in_StartComplete].Properties[Value];Start
Microsoft (R) SQL Server Execute Package Utility
Version 9.00.3042.00 for 32-bit
Copyright (C) Microsoft Corp 1984-2005. All rights reserved.
Started: 12:33:21 PM
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading value "<DTS:PropertyExpression xmlns:DTS="www.microsoft.com/SqlServer/Dts" DTS:Name="SqlStatementSource">"Select dbo.fnGetLastOpenExtract('" + @[User::in_ExtractName] + "') as eh_ID"</DTS:PropertyExpression>" from node "DTS:PropertyExpression".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source: {BE86A659-AB44-403A-9C89-3524821879E0}
Description: Error loading a task. The contact information for the task is "Execute SQL Task; Microsoft Corporation; Microsoft SQL Server v9; ? 2004 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1". This happens when loading a task fails.
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010021
Source:
Description: Element "{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" does not exist in collection "Executables".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:Executable xmlns:DTS="www.microsoft.com/SqlServer/Dts" IDREF="{1c66489c-2a3f-4c8a-b9e7-0161875427a2}" DTS:IsFrom="-1"/>" from node "DTS:Executable".
End Error
Error: 2007-07-17 12:34:52.98
Code: 0xC0010018
Source:
Description: Error loading value "<DTS:PrecedenceConstraint xmlns:DTS="www.microsoft.com/SqlServer/Dts"><DTS:Property DTS:Name="Value">0</DTS:Property><DTS:Property DTS:Name="EvalOp">2</DTS:Property><DTS:Property DTS:Name="LogicalAnd">-1</DTS:Property><DTS:Property DTS:Name="Expression"></" from node "DTS:PrecedenceConstraint".
End Error
Could not load package "D:ExtractsGBG_ExtractSSISImport_ExtractStartComplete_03.dtsx" because of error 0xC0010014.
Description: The package failed to load due to error 0xC0010014 "One or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors.". This occurs when CPackage::LoadFromXML fails.
Source:
Started: 12:33:21 PM
Finished: 12:34:53 PM
Elapsed: 91.938 seconds
View 7 Replies
View Related
Aug 30, 2006
Hey, I've a few jobs which call SSIS packages. If I run the SSIS package, it runs fine but if I try to run the job which calls this package, it fails. Can someone help me troubleshoot this issue? None of my jobs that call an SSIS package work. All of them fail.
Thank you
Tej
View 7 Replies
View Related
May 1, 2008
Environment: SQL Server 2005 Enterprise Edition x64, 3 server cluster. Two active servers with seperate instances and one passive server. SQL Server was installed on the two active servers.
Problem: When I fail over either of my instances to the passive server in the cluster my maintenance jobs fail to run and there are error messages in the application event viewer "SSIS Subsystem failed to load". I am guessing that all of the needed components are not installed on the passive server? Is this a close guess? If so, exactly what components are missing and do you have to have another license to install them?
Thanks in advance for any advice.
View 2 Replies
View Related
Jan 30, 2006
Howdy y'all, what the hey am I doing wrong here?
I am trying to suck in a HUGE flat file that is tab-delimited and each row ends with a hex :0D:0A.
The first few lines of the file are:
00000000h: 31 30 30 30 32 09 32 30 30 33 2D 30 31 2D 32 39 ; 10002.2003-01-29
00000010h: 20 30 30 3A 30 30 3A 30 30 2E 30 30 30 09 32 30 ; 00:00:00.000.20
00000020h: 2E 33 39 30 30 09 31 39 2E 38 30 30 30 09 32 30 ; .3900.19.8000.20
00000030h: 2E 33 34 30 30 09 34 32 31 33 37 09 31 2E 30 30 ; .3400.42137.1.00
00000040h: 30 30 0D 0A 31 30 30 30 32 09 32 30 30 33 2D 30 ; 00..10002.2003-0
00000050h: 31 2D 33 30 20 30 30 3A 30 30 3A 30 30 2E 30 30 ; 1-30 00:00:00.00
00000060h: 30 09 32 30 2E 33 35 30 30 09 31 39 2E 38 30 30 ; 0.20.3500.19.800
00000070h: 30 09 31 39 2E 38 37 30 30 09 33 33 39 33 33 09 ; 0.19.8700.33933.
here is my table script:CREATE TABLE [dbo].[HSF_Staging_TEST] (
[OSID] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Date] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Time] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[High] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Low] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Price] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Volume] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[Splits] [varchar] (30) COLLATE SQL_Latin1_General_CP1_CI_AS NULL
) ON [PRIMARY]
GOHere is my BULK INSERT statement:osql -S(local) -Uusername -Ppassword -Q "BULK INSERT Trades.dbo.HSF_Staging_Test FROM '\devserverinputfilesDataDataHSF.txt' WITH (FIELDTERMINATOR = ' ', ROWTERMINATOR = '', TABLOCK)" -o".HSF_Staging_Test_LOG.txt" -e".HSF_Staging_Test_ERR.txt"yeah, dang near perfect code, eh? ;)
well...here is the error I get...Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 1, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 2, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 3, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 4, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 5, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 6, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 7, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 8, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 9, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 10, column 8
(Splits).
Msg 4863, Level 16, State 1, Server TRADES, Line 1
Bulk insert data conversion error (truncation) for row 11, column 8
(Splits).
Msg 4865, Level 16, State 1, Server TRADES, Line 1
Could not bulk insert because the maximum number of errors (10) was
exceeded.
Msg 7399, Level 16, State 1, Server TRADES, Line 1
OLE DB provider 'STREAM' reported an error. The provider did not give
any information about the error.
OLE DB error trace [OLE/DB Provider 'STREAM' IRowset::GetNextRows
returned 0x80004005: The provider did not give any information about
the error.].
The statement has been terminated.Is the problem something about the :OD:0A at the end of each row, rather than just the :0A??? If so, how the heck do I specify that? I think based on my testing so far (also tried '
' as the rowtermination param, but then it gives me a truncation error for the first row only, leading me to think it cannot find the end of the row that way.
I am still looking through archives and on the web, but have not seen anything specific to my issue yet...and cannot believe that I am the first to BULK INSERT this kind of data.
Help is appreciated!
~Paul
View 1 Replies
View Related
Nov 6, 2007
when i run the job using network service account credentials job is failing. But when i run the package individually, it is tasting success. when it runs as job, this is the error message i am getting
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
I have changed to 32-Bit run time and ran the excel package, even then it is failing...i tried to use my credentials (i am admin on the box), even then it is failing...please suggest
View 1 Replies
View Related
Apr 10, 2006
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
View 1 Replies
View Related
Jan 24, 2007
Hi:
I have scheduled a SQL JOB (SSIS Package), eventhough the validation comes back as success, the job actually fails. I have configured the job to write to Windows Application Log, but How do i configure the Step(SSIS Package) to write errors to windows application log. I would like to find out why its failing, and I cant seem to find it? I am guessing I would have to setup Logging - Windows Event Log, but how do I configure it, any advice would be helpful. thanks.
View 5 Replies
View Related
Apr 8, 2008
I have 3 SSIS packages I had in a project and exported and scheduled via an SQL Agent job. 2 are working great and one is failing. I have noticed on this one its also having issues in BIDS. It runs sucessfully once then next day when I go in it fails. If I just go into the Data flow and open up the SQL Destimation and then hit ok and try re-running it works. It is like there is something that it doesn't remember.
Same thing happens in SQL Agent if before I promote I go into SQl destination editor hit ok save then
create my build run it via agent job it works 1st time but fails on the following time. I don't see anything different between this SSIS and the others but there must be something.
All of these are simple copy data from as/400 to SQL server with some data conversions.
Here is the error msg I am receiving.
Message
Executed as user: PERFORMANCEstacyadmin. ....3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 5:55:11 AM Error: 2008-04-08 05:56:00.88 Code: 0xC0202009 Source: Load WeeklySalesHistory Current Week WeeklySalesHistory [184] Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Reading from DTS buffer timed out.". End Error Error: 2... The package execution fa... The step failed.
What am I missing.
Stacy
View 3 Replies
View Related
Feb 6, 2006
I found a similar thread posted under the same title as this by dba123. Unfortunately, his solution does not match my problem.
I have a SSIS package that will run fine in debug mode, will run fine when published to the server when I right click and execute it. However, when I run it through a job, either scheduled or running the job manually, the job fails. There is an entry in the servers application log telling me that "login failed for user xxxxx" where xxxxx is the name of SQL login that I am using. I know that the login works (logged in manually to the server via management studio, and it runs fine when I run it manually). Both connection managers are SQL, no flat files or other data source types. All the commands are T-SQL. The SQL Agent has full database access to both servers that the connection manager connects to - and its NOT the profile that is reporting as failing - it is a domain account.
This is totally bizzare - ANY help would be appreciated.
View 7 Replies
View Related
Sep 11, 2007
I am having an issue with a job that runs a SSIS package that moves data from a transactional system to a data warehouse database.. The problem is that I have Log Shipping running to this database every 30 minutes which disconnects the users from the database so the transaction log can be restored. This is causing the job to fail. Is there a way in the job that runs to have it wait for the database to come on line or not fail because there is no connection? This job is a master job that runs multiple SSIS packages.
Thanks for any help.
Leo
Date 9/11/2007 2:00:01 PM
Log Job History (Reports Master)
Step ID 1
Server TWSQLRPTS
Job Name Reports Master
Step Name Step1
Duration 00:00:01
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: TWDOMAINSQLADMIN. ... 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 2:00:01 PM Error: 2007-09-11 14:00:02.34 Code: 0xC0202009 Source: BidBacklog Connection manager "TWSQLRPTS.HomeBASE" Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Login failed for user 'TWDOMAINSQLADMIN'.". An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Cannot open database "HomeBASE" requested by the login. The login failed.". End Error Error: 2007-09-11 14:00:02.34 Code: 0xC020801C Source: DTSTask_DTSDataPumpTask_1 OLE DB Source [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager ... The package execution fa... The step failed.
View 6 Replies
View Related
Feb 21, 2006
Hi,
I have a problem with an Access db
connection in my package when run by SQL Agent. I have problem running a job with my package so i used the
log and found out that when i change the connection property of the
access connection manager in my package to a local Access file on my
machine, it works just fine but if i change the connection to that of
an Access db on my Y drive (which has been set up on my machine), it
doesnt execute. I checked the security property of the network folder
in which the access db exist and I do have rights. That is to
say, i dont know why it cannot access it then. The funny part is that
when i run the packae in SSIS (VS.NET) or Intergration services in
Managment studio, it runs just fine but when i execute the job through
Sql Server Agent, it generates the following error:
OnError,CYPRESS0927,CYPRESSebuah,CLMH
from ocan
access,{b1f7035e-919c-434b-8a1d-d0f6267a13aa},{6ED748E8-16C0-4E9A-9DBD-882641657572},2/20/2006
6:15:15 PM,2/20/2006 6:15:15 PM,-1071611876,0x,The AcquireConnection
method call to the connection manager "ocan_conn" failed with error
code 0xC0202009.
ocan_conn is the name of my connection object to the access db in my package.
Is there anything Im missing.
View 3 Replies
View Related
Jan 4, 2006
My SQL Agent was working fine. Now when I try to run it, it failes when trying to run my SSIS package. I looked in the logs, and job history, no luck in finding any critical errors.
My SSIS package runs fine through VS 2005 in debug mode.
Here are the only errors:
01/04/2006 09:53:48,,Warning,[396] An idle CPU condition has not been defined - OnIdle job schedules will have no effect
01/04/2006 09:53:48,,Warning,[260] Unable to start mail session (reason: No mail profile defined)
01/04/2006 09:53:48,,Information,[129] SQLSERVERAGENT starting under Windows NT service control
01/04/2006 09:53:48,,Error,[364] The Messenger service has not been started - NetSend notifications will not be sent
01/04/2006 09:53:30,,Information,[432] There are 11 subsystems in the subsystems cache
01/04/2006 09:53:29,,Information,[339] Local computer is BG-SQL2005 running Windows NT 5.2 (3790) Service Pack 1
01/04/2006 09:53:29,,Information,[310] 1 processor(s) and 512 MB RAM detected
01/04/2006 09:53:29,,Information,[103] NetLib being used by driver is DBNETLIB.DLL; Local host server is
01/04/2006 09:53:29,,Information,[102] SQL Server ODBC driver version 9.00.1399
01/04/2006 09:53:29,,Information,[101] SQL Server BG-SQL2005 version 9.00.1399 (0 connection limit)
01/04/2006 09:53:29,,Information,[100] Microsoft SQLServerAgent version 9.00.1399.06 (x86 unicode retail build) : Process ID 1860
View 37 Replies
View Related
Jan 16, 2006
I am building a package that will be used to transfer data from Access 2000 to SQL 2005. For development purposes, the first thing I do is search for my SQL database. If it is there, I drop and recreate it. If I run the package once, it runs fine, . After that, I get the message that the database is in use and can not be deleted. I do not have Mgmt Studio open, so the only thing that could have a connection is the BI Studio. The only way I can seem to clear it, is to close and reopen BI Studio and the package. To make matters worse, it does not happen all the time. So sometimes I can run the package as many times as I would like, until it chokes, and then I get to start all over again. Has anyone else seen something like this, or am I missing something in the package and/or task settings? Please let me know.
Thanks,
DO
View 7 Replies
View Related
Jul 13, 2007
hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile
DATAFILETYPE = 'char'
FIELDTERMINATOR=' '
ROWTERMINATOR='
'
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 4 Replies
View Related
Jul 13, 2007
Hello,
I am working on an application that will import data from ascii tab-delimited files into corresponding tables in a sql server 2005 express db.
The problem I am facing is that i get errors when running bulk insert.
The tables all have one extra column which is a primary key identity value.
Additionaly, the column data types include:
int, bigint, nchar, nvarchar, datetime and bit
an example table looks like this:
CREATE TABLE [dbo].[counties](
[id] [int] IDENTITY(1,1) NOT NULL,
[InternalID] [int] NULL,
[Active] [bit] NULL,
[Code] [nchar](10) COLLATE Greek_CI_AS NULL,
[Description] [nvarchar](50) COLLATE Greek_CI_AS NULL,
[StartDate] [datetime] NULL
)
An example data file looks like this:
InternalIDActiveCodeDescriptionDate
1 101Αι�„�‰Î»Î¿Î±ÎºÎ±��ν16/11/1909
2 102Α��γολίδο�‚29/04/1949
3 103Α��καδία�‚16/11/1909
4 104Ά���„η�‚ 16/11/1909
5 105Α�„�„ική�‚ 26/07/1943
So, what I do is:
1. for each table I generate a character format file with the following command:
bcp mydb..table format nul -f tableformat.fmt -c -T -S hostsqlexpress
2. I modify the format file to exclude the first identity column by zeroing the field length, the column order and terminator. The resulting format file looks like this:
9.0
6
1 SQLCHAR 0 0 "" 0 id ""
2 SQLCHAR 0 12 " " 2 InternalID ""
3 SQLCHAR 0 3 " " 3 Active ""
4 SQLCHAR 0 20 " " 4 Code Greek_CI_AS
5 SQLCHAR 0 100 " " 5 Description Greek_CI_AS
6 SQLCHAR 0 24 " " 6 StartDate ""
3. I run BULK INSERT
BULK INSERT tablename
FROM dataFile
WITH (
FIRSTROW=2,
FORMATFILE = formatFile,
DATAFILETYPE = 'char',
FIELDTERMINATOR=' ',
ROWTERMINATOR='
',
KEEPNULLS
)
As a result of the above configuration I get this:
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 2, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 3, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 4, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 5, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 6, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 7, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 8, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 9, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 10, column 6 (EndDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 11, column 5 (StartDate).
Msg 4864, Level 16, State 1, Line 1
Bulk load data conversion error (type mismatch or invalid character for the specified codepage) for row 12, column 6 (EndDate).
Msg 4865, Level 16, State 1, Line 1
Cannot bulk load because the maximum number of errors (10) was exceeded.
Msg 7399, Level 16, State 1, Line 1
The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.
Msg 7330, Level 16, State 2, Line 1
Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
What am I doing wrong here? With previous configurations I got errors about the BIT fields. In general, I only receive errors... The only thing that worked was with a table that only had nvarchar. Is there a fundamental mistake in what i do? I have read many posts, but nothing specific about handling different data types with bcp and bulk insert.
I would appreciate any help, as I am running out of time
Thank you.
Dimitris Chrysomallis
View 5 Replies
View Related
Mar 9, 2006
I keep getting a failure when trying to run my agent which is trunning an SSIS 2005 package. I have checked the logins and appear to have given the right logins owner to the msdb database and my other databases but still getting this error:
03/09/2006 10:13:31,Run EBN Process,Error,0,BG-22SQL,Run EBN Process,(Job outcome),,The job failed. The Job was invoked by User domainmyuserid. The last step to run was step 1 (Run EBN SSIS Package).,00:00:02,0,0,,,,0
03/09/2006 10:13:31,Run EBN Process,Error,1,BG-22SQL,Run EBN Process,Run EBN SSIS Package,,Executed as user: domainaccount_we_setup_to_run_all_sql_services_on_this_server. The package execution failed. The step failed.,00:00:02,0,0,,,,0
Is it the package that is failing or permission issue?
View 6 Replies
View Related
Mar 9, 2006
I deployed my SSIS package to SQL Server 2005.
I have done the following:
1) Gave the sql agent account permissions to the msdb database and other databases
2) Checked the paths for "Data Sources" under properties of my agent in the SSIS properties
3) Set the authentification to Windows and used the sql agent account (a domain account that I setup) to run the agent. I also tried my login. So it's not a permission issue, because I do not get permission errors...it's past this.
What works:
1) Other SQL Agent packages...they are not running an SSIS package, just SQL
2) Running the SSiS package by right-clicking on it in Management Sudio. No errors found in the execution and the package does it's intended function
3) Package runs fine with absolutely no errors in VS 2005
What doesn't work:
1) My agent that points to my SSIS package. All this agent does is run that package. When I run the agent, I get a minimal error message in the job history logs stating the following error message:
03/09/2006 12:49:58,Run EN Process,Error,0,BG-22SQL,Run EN Process,(Job outcome),,The job failed. The Job was invoked by User domainmy_account. The last step to run was step 1 (Run EN SSIS Package).,00:00:02,0,0,,,,0
03/09/2006 12:49:58,Run EN Process,Error,1,BG-22SQL,Run EN Process,Run EN SSIS Package,,Executed as user: domainsqlagent_account. The package execution failed. The step failed.,00:00:01,0,0,,,,0
View 4 Replies
View Related
Sep 12, 2007
I'm at a bit of a loss. I've written a package that has about a dozen data flow tasks and each one loads data from text files into tables in a db. It's possible that some of the fields in the text files may have data that would need to be truncated upon insert into the db.
In the data flows, I've set the fields in the data sources I know this could happen to to ignore truncation errors. When I run this within BI Studio, everything works fine. I then loaded the package into the SSIS store on the db server and if I attempt to run it from the SSIS store or if a job executes it, the package appears to be failing because of these truncation errors that I've told it to ignore.
Am I missing something? Thanks!
View 7 Replies
View Related
Jun 8, 2007
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
View 6 Replies
View Related
Jan 28, 2008
Hi All,
Recently in an SSIS package I am getting the following error for a particular Data flow task.
Error: 2008-01-25 12:01:48.58
Code: 0xC0202009
Source: Import Datasynapse Data User Events Source [3017]
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x8000FFFF.
End Error
Error: 2008-01-25 12:01:48.73
Code: 0xC004701A
Source: Import Datasynapse Data DTS.Pipeline
Description: component "User Events Source" (3017) failed the pre-execute phase and returned error code 0xC0202009.
End Error
Our guess is when the data size of User Events table is more it throws this error. If we try to transfer small subset of data it succeeds. What could be reason for this error?
Since this is very urgent, immediate response would be very much appreciated.
Thanks & Regards,
Prakash Srinivasan
View 4 Replies
View Related
May 15, 2014
Is there a switch I can use to force a bulk insert and if data is truncated, I'm good with that. The truncated data, in this case, is not data I can use anyway if it is long enough to be truncated.
I need to keep the field at VARCHAR(23) and if I expand it, I won't be able to join on it after the file load completes. I'd like the data to be inserted (truncated if need be) and then I'll deal with the records that are truncated after I load the file.
View 5 Replies
View Related
Sep 28, 2007
Hi,
I'm trying to develop a custom conflict resolver and I get the following message:
Error loading custom class "HQ.MemberHandler" from custom assembly "C:shareConflictHandler.dll", Error : "Could not load type 'HQ.MemberHandler' from assembly 'ConflictHandler, Version=1.0.0.0, Culture=neutral, PublicKeyToken=42ba9b913dccf3a9'."."
The resolver is register in the GAC.
I checked with sp_enumcustomresolvers that it is register in SQL.
The sync is working fine if I'm not using the resolver.
Here's the code of the resolver:
Imports System
Imports System.Text
Imports System.Data
Imports System.Data.Common
Imports Microsoft.SqlServer.Replication.BusinessLogicSupport
Namespace HQ
Public Class MemberHandler
Inherits BusinessLogicModule
' Variables to hold server names.
Private publisherName As String
Private subscriberName As String
' Implement the Initialize method to get publication
' and subscription information.
Public Overrides Sub Initialize( _
ByVal publisher As String, _
ByVal subscriber As String, _
ByVal distributor As String, _
ByVal publisherDB As String, _
ByVal subscriberDB As String, _
ByVal articleName As String _
)
' Set the Publisher and Subscriber names.
publisherName = publisher
subscriberName = subscriber
End Sub
' Declare what types of row changes, conflicts, or errors to handle.
Public Overrides ReadOnly Property HandledChangeStates() As ChangeStates
Get
' Handle Subscriber inserts, updates and deletes.
Return (ChangeStates.SubscriberInserts Or _
ChangeStates.SubscriberUpdates Or ChangeStates.SubscriberDeletes)
End Get
End Property
Public Overrides Function InsertHandler(ByVal insertSource As SourceIdentifier, _
ByVal insertedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If insertSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber insert.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("A new member was entered at {0}. " + _
"The ID for the member is :", subscriberName))
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(insertedDataSet.Tables(0).Rows(0)("memb_pnom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the inserted data in the Subscriber's data set and
' apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.InsertHandler(insertSource, insertedDataSet, customDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function UpdateHandler(ByVal updateSource As SourceIdentifier, _
ByVal updatedDataSet As DataSet, ByRef customDataSet As DataSet, _
ByRef historyLogLevel As Integer, ByRef historyLogMessage As String) _
As ActionOnDataChange
If updateSource = SourceIdentifier.SourceIsPublisher Then
' Build a line item in the audit message to log the Subscriber update.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was updated at {0}. " + _
"The ID for the member is ", subscriberName))
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_seq").ToString())
AuditMessage.Append("Member Name :")
AuditMessage.Append(updatedDataSet.Tables(0).Rows(0)("memb_nom").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the updated data in the Subscriber's data set and apply it to the Publisher.
Return ActionOnDataChange.AcceptData
Else
Return MyBase.UpdateHandler(updateSource, updatedDataSet, _
customDataSet, historyLogLevel, historyLogMessage)
End If
End Function
Public Overrides Function DeleteHandler(ByVal deleteSource As SourceIdentifier, _
ByVal deletedDataSet As DataSet, ByRef historyLogLevel As Integer, _
ByRef historyLogMessage As String) As ActionOnDataDelete
If deleteSource = SourceIdentifier.SourceIsSubscriber Then
' Build a line item in the audit message to log the Subscriber deletes.
' Note that the rowguid is the only information that is
' available in the dataset.
Dim AuditMessage As StringBuilder = New StringBuilder()
AuditMessage.Append(String.Format("An existing member was deleted at {0}. " + _
"The rowguid for the member is ", subscriberName))
AuditMessage.Append(deletedDataSet.Tables(0).Rows(0)("rowguid").ToString())
' Set the reference parameter to write the line to the log file.
historyLogMessage = AuditMessage.ToString()
' Set the history log level to the default verbose level.
historyLogLevel = 1
' Accept the delete and apply it to the Publisher.
Return ActionOnDataDelete.AcceptDelete
Else
Return MyBase.DeleteHandler(deleteSource, deletedDataSet, _
historyLogLevel, historyLogMessage)
End If
End Function
End Class
End Namespace
Here's the SQL query to register the resolver:
DECLARE @publication AS sysname;
DECLARE @article AS sysname;
DECLARE @friendlyname AS sysname;
DECLARE @assembly AS nvarchar(500);
DECLARE @class AS sysname;
SET @publication = N'memb';
SET @article = N'memb';
SET @friendlyname = N'TestConlictResolver';
SET @assembly = N'C:shareConflictHandler.dll';
SET @class = N'HQ.MemberHandler';
-- Register the business logic handler at the Distributor.
EXEC sys.sp_registercustomresolver
@article_resolver = @friendlyname,
@resolver_clsid = NULL,
@is_dotnet_assembly = N'true',
@dotnet_assembly_name = @assembly,
@dotnet_class_name = @class;
-- Add an article that uses the business logic handler
-- at the Publisher.
EXEC sp_changemergearticle
@publication = @publication,
@article = @article,
@property = N'article_resolver',
@value = @friendlyname,
@force_invalidate_snapshot = 0,
@force_reinit_subscription = 0;
GO
Any clues??
Thanks
View 2 Replies
View Related
Apr 4, 2007
hi there,
when i start SQL Server business intelligence developer and create new Integration Service project, i will see following error:
Error loading 'Package.dtsx' : Object reference not set to an instance of an object.. C:SairiMy DocumentsVisual Studio 2005ProjectsIntegration Services Project12Integration Services Project12Package.dtsx
this error occures just on my PC and i reinstalled VS2005 and SQL2005 again and unfotunately the problem existes.
please someone helps me (just don't tell me to format my PC!!!)
tnx
View 10 Replies
View Related
Feb 14, 2008
I have created a package that loads data . I need advice on a quik way to schedule this baby .
Regards to ALL
View 1 Replies
View Related
Jun 14, 2006
While Creating a script task in Control Flow, I am getting "Package Validation Error". Here is the complete message:
Error at Validate File and Load Data: The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated.
(Microsoft.DataTransformationServices.VsIntegration)
As mentioned in the message, I opened the script IDE and added the code I need. When I close the VSA IDE, package designer displays the same error message.
The worst part of whole story is that if I close the package designer and reopen it, I find that all the code I wrote in the script task has been deleted by the package designer. This is not at all acceptable as I saved the package the and still lost all my work. I did all the coding from scratch for that task.
Please respond if anyone faced similar problem.
Thanks in advance!
Anand
PS: If any one from Microsoft is reading this, please see what you guys are coding there. Due to the buggy software you deliver, I am loosing my credibility.<P< P>
View 5 Replies
View Related
Sep 26, 2007
I am looking high and low for some assistance with developing a VB .NET solution that I programmatically create a package and add tasks. I am adding a BULK INSERT task to load large FLAT TEXT files into SQL Server 2005 tables. When I execute the application I execute a package validation and it always returns FAILURE. I have been reading and searching like crazy and I have bought 2 microsoft books, TO NO AVAIL! Can anyone PLEASE help me with this. Thank you!
Cheers~
View 10 Replies
View Related
