Hi Guys,
Here i'm back again on the previous problem of Transaction. I think the problem is coming up because in Dataflow1 i'm referring to a Sql Server table and in DataFlow2 i'm referring to the same table and when they're in transaction they're locked.
How to get rid of this glitch?
Ta
Gemma
I want to truncate a table (remove all of its data) using an "Execute SQL task" and then populate that table using a Data Flow task. In case of failure, I want to "rollback" the table to its state prior to its truncation.
Can this be done using SSIS Transaction support or is that support aimed exclusively at sql-based flows?
TIA,
barkingdog
Hi Pals,
I have few queries regarding the transaction management in SSIS.
1. I have a SSIS package in which i have a 2 DataFlow Tasks which basically loads 10,000 records in each table.
2. Then i have one Execute SQL Task which contains an 2 UPDATE statements.
The first UPDATE statement update the table1 which has no issues.It is preetty much straight forward.
Inside the 2nd UPDATE statement, i purposefully updating a numeric column with Alphabets. which throws an Exception.
Since I am taking care of Exception Handling in my stored procedure. So my previous UPDATE will get ROLLBACK'ed as
expected.
The catch here is, As the update statement is failed(i.e Txn is Rollabcked). Do i need to Rollback the entire data loads i.e
10,000 recs into Table T1 and table T2.
In such scenarios how do we deal such things in Real Time.
Do we Rollback the Entire Process. Can you please suggest me how do we takle such situations in SSIS.
Thanks & Regards.
Hi,
I made a small SSIS package where I am performing some data transfer operations.
There are two servers A and B
I am getting some data from A , comparing it with some data in Server B and finally inserting some data back in A on the basis of the comparison and logic.
Anyway, the internal logic of SSIS package is not important here. What is important is that since I am deleting the data in Server A before reflooding it from Server B , this SSIS package needs to be in a transaction for obvious data integrity reasons.
I tried to put the "TransactionOption" of the package to "Required" and it fails to acquire connection after that. I do not seem to understand the reason for it because as soon as I revert the transaction option to "Supported" it is able to acquire the connection.
Hello everyone, I had been studying the relationship between SSIS Checkpoints and SSIS Transactions.
What I want to do is to create a package with different task, where each one task creates a new transaction, and the same time each task be a checkpoint, it€™s in order to restarts the package from the failure task not from the beginning.
The Transaction-Checkpoint solution contains two packages*:
CkeckpointsAndTransactions1.dtsx and CkeckpointsAndTransactions2.dtsx
Package CkeckpointsAndTransactions1 contains four tasks, task three always fail. The package is configured to use checkpoints and each individual task creates a checkpoint. Additionally, each task creates a new transaction. The package has the TransactionOption setting to NoSupported.
In the CkeckpointsAndTransactions1 package there is something wrong, when the third task fails and I restart the package, the package starts from the beginning, this is wrong!!, the package should restart from the failure task.
In order to the package works like is expected it€™s necessary to add a new task between second and third task. It is also necessary that this new task hasn€™t transaction support. This is shown in the CkeckpointsAndTransactions2 package, in this package after package failure, I restart the package and the package restarts from the failure task, like is expected, but the additional task should not be necessary!!
Does anyone what is wrong in my packages?? How can I to create a package with different task, where each task creates a new transaction, and the same time each task be a checkpoint?
*Please download the BIDS solution from hernan93.files-upload.com (Transaction-Checkpoint.zip file)
Hi,
I am new to SSIS but have been putting together a relatively complex ETL over the last few weeks. However, I have been stuck on the problem below for the last 4 days and to save my sanity, I would appreciate any help or advice.
Thanks in advance,
jc
I have a 'Control_Upload' package which contains 2 transaction containers in series. Being in series, the transactions should never overlap.
The first transaction container exists within a For Each container and contains several 'Execute SQL' and 'Data Flow' tasks. I have set the 'TransactionOption' on the Transaction container to 'Required' and the tasks within the container are set to a combination of 'Supported' and 'NotSupported'. I have set the IsolationLevel on all 'Supported' tasks to 'ReadUncommited'.
On completion, the second transaction is executed.
The second transaction container also exists within a For Each container and contains 2 'Execute SQL' tasks and 3 'Execute Package' tasks. The invoked packages also contain a ForEach Loop and several 'Execute SQL' and 'Data Flow' tasks. Again, I have set the 'TransactionOption' on the Transaction container in 'Control_Upload' to 'Required' and the tasks within the container are set to a combination of 'Supported' and 'NotSupported'. I have set the IsolationLevel on all 'Supported' tasks to 'ReadUncommited'.
I am experiencing 2 different errors which the SSIS configuration described above.
The first error relates to the first transaction. SSIS executes a number of the 'Execute SQL' and 'Data Flow' tasks which are 'Supported' by the transaction, however, it hangs indefinitely (without any warnings or errors) when it tries to execute the final 'Data Flow' task. The initial tasks execute as expected and the transaction completes if I disable the 'hanging' task. When writing data to tables within all 'Data Flow' tasks, I have the 'Data Access Mode' set to 'Table or view - fast load' and have unchecked the 'Table lock'. For this reason, I do not understand why I seem to be experiencing a potential contention lock!?!
The second error relates to the second transaction. The 3 'Execute Packages' are 'Supported' in the transaction. The first 2 seem to execute successfully but the 3rd returns the following error message when executing one of the 'Data Flow' tasks within the 3rd package.
'SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occured. Error code: 0x80004005. And OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "This operation conflicts with another pending operation on this transaction. The operation failed."'.
However, the 3 'Execute Package' tasks are connected in series and like the previous transaction, I have the 'Data Access Mode' set to 'Table or view - fast load' and have unchecked the 'Table lock' within all DB destination components. For this reason, I do not understand why I seem to be experiencing a potential contention lock!?!
Any thoughts would be greatly appreciated.
Sorry for the length and apologies in advance for my overuse of '''''' !!!
I have an SSIS Package that loads data to a SQL Server table and also logs package statistics along the way with individual SQL statements. In the event of failure, I want the data loaded to the target table rolled back but I want the statistics updates saved to the database. My package consists of several Execute SQL tasks that handle the logging and a Data Flow task that loads the data to the target table along with a couple of event handlers to handle errors. I have the Transaction Option property on the Package set to Required, to Supported on the Data Flow, and to Not Supported on the Execute SQL tasks and the OnError Event Handlers.
When we run the package (and cause an error) everything runs fine until it gets to the On Error event handler for the Data Flow task. This task hangs and never finishes. If we set the Transaction Option for the Event Handler to Supported (allowing it to enlist in the parent transaction) it works but the updates that it makes roll back along with the data from the Data Flow.
Is there a problem with having Event Handlers stay out of a transaction started by the parent package?
Any help would be appreciated.
Hi:
I would like to have my SSIS tasks to be transacted, but due to infrastructure issues in our network, cannot utilize DTC, because our SQL Boxes are situated where the DTC cannot communicate. Are any other alternatives? Is it a feasible alternative? Please let me know. Thanks.
Hi All,
We have a SSIS package where we have implemented a cursor in Execute SQL Task.
Immediately after this Execute SQL Task, we have a Data Flow Task.
The package was running absolutely fine until we changed the Transaction property of the Package to "Required".
The Transaction property for all the tasks in the Control Flow is set to "Supported".
Now, after the execution of the Execute SQL Task containing the cursor, the Data Flow Task becomes "yellow", but, does not execute. The package then gets stuck at this point and does not execute any further.
Anybody has encountered such a problem with Transactions in SSIS?
Thanks in advance.
Regards,
B@ns.
I would like to have my SSIS tasks to be transacted, but due to infrastructure issues in our network, cannot utilize DTC, because our SQL Boxes are situated where the DTC cannot communicate. I know we can use execute SQL task with Bein Trans, but I dont think dataflow and all will not be in scope of this and cannot be rollback in case of any error in the underlying tasks.
View 2 Replies View RelatedHi there,
I have decided to move all my transaction handling from asp.net to stored procedures in a SQL Server 2000 database. I know the database is capable of rolling back the transactions just like myTransaction.Rollback() in asp.net. But what about exceptions? In asp.net, I am used to doing the following:
<code>Try 'execute commands myTransaction.Commit()Catch ex As Exception Response.Write(ex.Message) myTransaction.Rollback()End Try</code>Will the database inform me of any exceptions (and their messages)? Do I need to put anything explicit in my stored procedure other than rollback transaction?
Any help is greatly appreciated
I'm receiving the below error when trying to implement Execute SQL Task.
"The ROLLBACK TRANSACTION request has no corresponding BEGIN TRANSACTION." This error also happens on COMMIT as well and there is a preceding Execute SQL Task with BEGIN TRANSACTION tranname WITH MARK 'tran'
I know I can change the transaction option property from "supported" to "required" however I want to mark the transaction. I was copying the way Import/Export Wizard does it however I'm unable to figure out why it works and why mine doesn't work.
Anyone know of the reason?
Hi All,
Can anybody suggest me a website where I can find articles on Managing transactions with Sql server. Also a scenario where the transactions take place in a environment involving 2 different databases, Like the bank account and credit card transactions (specifically of 2 way kind)
Thanks
I have a web application with a shopping cart, how do I stop all the shopping cart transaction from going into the db log? Is this possible? These are are only transient data movements, and will never be need to to restore to, and they are cause log bloat. Or is there a better way to stop log bloat?
Thanks
Hi All,
How can we change connection properties in a DTS pkg with connection?
You can loop through the connection count but the connection ID is not static one.So can’t rely on that.
Is there another way of changing connection properties?
Thanks in Advance
Barath
Hi all....
I am currently designing a DTS Package to import data that is processed daily into a large database.
I have to design the package such that if any step fails when importing, I roll back the entire transaction.
I have designed the package with this in mind, checked "join transaction if present" and "rollback transaction on failure" in all of the workflows. I have also made all workflows serialized.
However, when I run the package, it fails on one of the data pumps with the error:
Transaction context in use by another session.
Any ideas?
Thank you,
Brian
I am replicating (finally!!) and on my publishers agent history I can see it says xx transactions with xx commands were delivered. (xx being the number)
Where can I look to see what the transactions or commands are?
Is there a place the system stores this information?
what is maximum limit of no. of transactions per sec. in sql server 2000
View 2 Replies View RelatedIs there a point to wrapping a single UPDATE or INSERT statement in an explicit TRANSACTION:
BEGIN TRANSACTION
INSERT INTO Table (...) VALUES (...)
COMMIT TRANSACTION
I understand ACID and concept of transactions. However, I thought they were only necessary for multi-statement operations. I'm maintaining code that does this and am wondering if this is necessary. Does SQL Server guarantee ACID for single statements? Are single UPDATE/INSERT statements prone to race condition like affects without using explicit transactions?
Are there any scenarios where an un-commited transaction would block further queries?
View 1 Replies View RelatedIf you run the Begin Transaction code and then run a create such as an update query and you see that it effects the number of rows that you wanted it to effect is there a way to look at the actual data that changed before you Commit Transaction?
Thanks!
I have a table with around 240 columns and one of the column in the Table is the Inserttime ( DATETIME ) and I using a GETDATE() function in the stored Proc, when we insert data into the table. In the same Milli second 2007-06-27 09:32:58.303 , I have around 7600 records in the database. The Stored Proc is called for each Individual record and we don't bunch the transactions. Is this possible.
I did some bench marking on this server and I can insert only 700 - 800 records approx / sec on this particular table.
Thanks
I have a small database that I have been testing.I get an error about a transaction deadlock.The code is in stored procedures and I added transactions to the sp'sbut the error happened again.I wrapped the whole sp in just one transaction and I don't have anyindex on the tables.When I test just by running a program that sends 3 calls at a time itwill get a deadlocked transaction as I send 6 or 9 at a time.I am not sure how it can have a deadlocked transaction after I usedtransactions(begin and commit) in the sp's.Steve
View 4 Replies View RelatedI am working with transactions and use try catch to capture errors and in the event of an error i have to rollback the transaction. How can i perform this?, most of the errors which i forsee are either insertion of null values into non nullable columns or violation of Primary keys while inserting duplicates.
I started by coding the following way but it does not rollaback apparently the try catch does not work for above kind of errors..Can somebody help..
DECLARE @REPORTING_PERIOD VARCHAR(6)
BEGIN TRY
BEGIN TRANSACTION
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
SET @REPORTING_PERIOD =(Select REPORT_PERIOD_ID from dbo.T_REPORT_PERIOD where C_FLAG_ACTIVITY=1)
--Step 1
INSERT INTO [dbo].[T_COUNTRIES]
([C_COUNTRY]
,[LB_COUNTRY]
,[C_REGION]
,[FK_REPORTING_PERIOD])
SELECT [C_COUNTRY]
,[LB_COUNTRY]
,[C_REGION]
,@REPORTING_PERIOD
FROM [dbo].[IN_T_COUNTRIES]
--Step 2
INSERT INTO [dbo].[T_FLE]
([FK_P_FLE]
,[C_COSMOS]
,[LB_FLE]
,[C_PARETO]
,[C_OPCO_SCOPE]
,[C_LEVEL]
,[C_FLE_TYPE]
,[C_ACTIVITY]
,[F_MATERIAL]
,[C_MATERIAL_PRIORITY]
,[C_CALCULATION_METHOD]
,[F_CREDIT_RISK_MATERIALITY]
,[V_PARTICIPATION]
,[FK_REPORTING_PERIOD])
SELECT Null as [FK_P_FLE]
,[C_COSMOS]
,[LB_FLE]
,[C_PARETO]
,[C_OPCO_SCOPE]
,[C_LEVEL]
,[C_FLE_TYPE]
,@REPORTING_PERIOD
FROM [dbo].[IN_T_FLE]
COMMIT TRANSACTION
END TRY
BEGIN CATCH
SELECT
ERROR_NUMBER() as ErrorNumber,
ERROR_LINE() as ErrorLine,
ERROR_MESSAGE() as ErrorMessage;
-- Test XACT_STATE for 1 or -1.
-- XACT_STATE = 0 means there is no transaction and
-- a commit or rollback operation would generate an error.
-- Test whether the transaction is uncommittable.
IF (XACT_STATE()) = -1
BEGIN
PRINT
N'The transaction is in an uncommittable state. ' +
'Rolling back transaction.'
ROLLBACK TRANSACTION;
END;
-- Test whether the transaction is active and valid.
IF (XACT_STATE()) = 1
BEGIN
PRINT
N'The transaction is committable. ' +
'Committing transaction.'
COMMIT TRANSACTION;
END;
END CATCH;
Hello All,
When i am working with Transactions i got one doubt.
If i am inserting any records into a table with primary key if a transaction is rolled back i am finding one primary ID is missing. Is it so.
I've been searching around and haven't found anything that simply states what I want to know.
I want to use a transaction within my CLR Stored Proc, to do so I've got System.Transactions referenced and I can access the current transaction via Transaction.Current.
My questions are
Will there always be a current transaction?
Do I need to create a new transaction if one doesn't already exist?
Hi world:
I have this issue:
I need to push rows from CE to SQL Server 2000 and after delete these rows of CE database only if all rows have been sent to SQL Server 2000.
I think the best is work with transactions. Since I know I can use transactions for this purpose, can anybody give me a link with push transaction examples ?
Hi all,
What does "Transactions/sec" counter in SQL 2005 under databases do in terms of performance. My counter shows almost 100% all the time in 4 terrbyte DB in superdome with many CPUs.
Which is the optimal value for this counter?
thanks in advance
Priw
Hi,
I am using C#.NET 2005, SQL Server 2000.
I have a few questions to ask. Firstly, can anybody help me by telling the difference between the code below and the same code with comments removed:
string localquery = "select bla bla"; SqlDataAdapter _sda; DataTable _dt; SqlCommand _cmd; bool isErrCatched = false; Exception ExcToThrow = new Exception(); using (SqlConnection _cn = NewConnection) // NewConnection returns a static SQLConnection object { _cn.Open(); _cmd = new SqlCommand(localquery, _cn); //SqlTransaction myTrans; //myTrans = _cn.BeginTransaction(); //_cmd.Transaction = myTrans; _dt = new DataTable(); _sda = new SqlDataAdapter(_cmd); try { _sda.Fill(_dt); _sda.Dispose(); //myTrans.Commit(); } catch (Exception exc) { //try { myTrans.Rollback(); } catch {} isErrCatched = true; ExcToThrow = exc; } finally { _cn.Close(); } _cmd.Dispose(); } _cmd = null; if (isErrCatched) throw ExcToThrow; return _dt;
My first question: Can there be a performance loss if I uncomment the lines about transaction usage? I mean, when I do this I start to get more timeouts.
My problem goes on. When I comment those lines and run a stress tool, I am getting "column X does not belong to table Y" errors. If those lines are not commented i am not getting this error, but I get timeout errors frequently. So, my second question: is there something wrong in my query or is there a bad coding practice I am following? Could someone offer a better and more robust sample for this code block?
By the way, connection pooling is on. And these errors are observed under high loads.
Thanks everybody.
I have transaction that will run on an hourly bases. I need to make sure that no one will start this transaction while it is running. I just need to know the system table that has all the transaction names in them and check to see if the transaction is running or not. what i am trying to do is not to have locks....just wanting to make sure that no one would run the same transaction twice. does anyone have any idea on how we can do this?
View 7 Replies View Related
If you ask a .net developer he would likely say that he uses System.Transactions to manage transactions, a DBA on the other hand places transactions within the T-SQL of stored procedures.
What rules do architects and others, use when determining if the transactions should be placed in:
.net Middle Tier Components using System.Transactions for example.
T-SQL Stored Procedures.
Both .net Middle Tier Components and T-SQL Stored Procedures.
Thanks in advance,
Doug Holland
if i have a loop that runs through records in a dataset like thisfor(int i=0;i<ds.Tables[0].Rows.Count;++i) and in this loop i have several sql commands that run as a transaction in a try / catch block like : try{ // do stuff}catch{ trans.RollBack();}how can i keep the loop going even if a transaction failed. So the transaction works for each individual row. if row 100 fails for whatever i would like the loop to continue running, do i just simply remove the "throw" and it will continue looping ? my catch block currently looks like catch(Exception ex){transaction.Rollback();activity.Log("Transaction aborted, rolling back. Error Message: " + ex.Message + " Stack Trace: " + ex.StackTrace.ToString());throw; }thanks,mcm
View 4 Replies View RelatedI have a class that use a TransactionScope object for make make two operations into a database. The problem is that in a computer works well but in another I receive a error message: "MSDTC is not running in .SQLEXPRESS". I had watched the services in the computer and the "Microsoft Distributed Transaction Coordinator" is running.
Does somebody know what is happening?
Thankyou and sorry for my English.