SSMS Won't Connect
Jul 7, 2007
Just installed SQL Server 2005 Standard. When I attempt to connect using SSMS it just sits. No error comes up. The log seems to indicate everythings OK. SQLServer and SQLBrowser services are started. Here's the log:
2007-07-07 09:41:23.07 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-07 09:41:23.07 Server (c) 2005 Microsoft Corporation.
2007-07-07 09:41:23.07 Server All rights reserved.
2007-07-07 09:41:23.07 Server Server process ID is 2412.
2007-07-07 09:41:23.07 Server Authentication mode is WINDOWS-ONLY.
2007-07-07 09:41:23.07 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'.
2007-07-07 09:41:23.07 Server This instance of SQL Server last reported using a process ID of 1348 at 7/7/2007 9:35:40 AM (local) 7/7/2007 2:35:40 PM (UTC). This is an informational message only; no user action is required.
2007-07-07 09:41:23.07 Server Registry startup parameters:
2007-07-07 09:41:23.07 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf
2007-07-07 09:41:23.07 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG
2007-07-07 09:41:23.07 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf
2007-07-07 09:41:23.11 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2007-07-07 09:41:23.11 Server Detected 1 CPUs. This is an informational message; no user action is required.
2007-07-07 09:41:23.34 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2007-07-07 09:41:23.36 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2007-07-07 09:41:23.89 Server The Microsoft Distributed Transaction Coordinator (MS DTC) service could not be contacted. If you would like distributed transaction functionality, please start this service.
2007-07-07 09:41:23.89 Server Database mirroring has been enabled on this instance of SQL Server.
2007-07-07 09:41:23.90 spid5s Starting up database 'master'.
2007-07-07 09:41:24.20 spid5s SQL Trace ID 1 was started by login "sa".
2007-07-07 09:41:24.28 spid5s Starting up database 'mssqlsystemresource'.
2007-07-07 09:41:24.31 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required.
2007-07-07 09:41:25.65 Server A self-generated certificate was successfully loaded for encryption.
2007-07-07 09:41:25.67 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER ].
2007-07-07 09:41:25.67 Server Server local connection provider is ready to accept connection on [ \.pipesqlquery ].
2007-07-07 09:41:25.67 spid9s Starting up database 'model'.
2007-07-07 09:41:25.67 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2007-07-07 09:41:25.67 Server Dedicated admin connection support was established for listening locally on port 1434.
2007-07-07 09:41:25.68 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2007-07-07 09:41:25.68 spid5s Server name is 'LAPTOP'. This is an informational message only. No user action is required.
2007-07-07 09:41:25.71 spid12s Starting up database 'msdb'.
2007-07-07 09:41:25.71 spid13s Starting up database 'ReportServer'.
2007-07-07 09:41:25.71 spid14s Starting up database 'ReportServerTempDB'.
2007-07-07 09:41:25.71 spid15s Starting up database 'testx'.
2007-07-07 09:41:27.45 spid9s Clearing tempdb database.
2007-07-07 09:41:28.65 spid9s Starting up database 'tempdb'.
2007-07-07 09:41:28.78 spid5s Recovery is complete. This is an informational message only. No user action is required.
2007-07-07 09:41:28.78 spid12s The Service Broker protocol transport is disabled or not configured.
2007-07-07 09:41:28.78 spid12s The Database Mirroring protocol transport is disabled or not configured.
2007-07-07 09:41:29.25 spid12s Service Broker manager has started.
2007-07-07 09:57:23.54 Server CPU time stamp frequency has changed from 117988 to 200203 ticks per millisecond. The new frequency will be used.
2007-07-07 10:09:23.85 Server CPU time stamp frequency has changed from 200203 to 242307 ticks per millisecond. The new frequency will be used.
2007-07-07 10:20:03.20 spid12s Service Broker manager has shut down.
2007-07-07 10:20:04.25 spid5s SQL Server is terminating in response to a 'stop' request from Service Control Manager. This is an informational message only. No user action is required.
2007-07-07 10:20:04.25 spid5s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
View 3 Replies
ADVERTISEMENT
Jun 25, 2015
Is there a roadmap for allowing SSMS to connect to a PDW (MS SQL2012 Parallel Data Warehouse) with full functionality? Current support leaves much to be desired without installing third party tools.
View 3 Replies
View Related
May 16, 2006
I've installed SQL Server 2005 SP1 RTM on a Windows 2003 R2 machine (machine A), and my local workstation (machine B).
From machine B, I can use SSMS to connect to SQL Server on machine A. This is using either "New Query" or "Object Explorer".
However, on machine A, SSMS can only connect to machines A or B using the "New Query" option. If I try "Object Explorer" for either, I get the error message "Failed to retrieve data for this request... urn could not be resolved at level Configuration."
I'm not sure what died (no pun intended) since the last time this worked. Any thoughts on this?
View 1 Replies
View Related
Sep 21, 2007
We are running SQL 2005 Standard on Windows 2000 Server Standard. We are trying to connect via SSMS with the Object Explorer to the server and it is failing with an error message stating:
"An exception occurred while executing a Transact-SQL statement or batch.
Additional Information:
Error executing extended stored procedure: Invalid Parameter (Microsoft SQL Server, Error: 22001)
Using profiler, I tracked down that it is a call to xp_instance_regread. This is something that SSMS is issuing - not me.
We've found in the past that rebooting the server fixes the problem. But it keeps cropping up. The only thing running on this server is SQL 2005 - so if something is monkeying with the registry - it's got to be SQL Server itself.
Querying works just fine - we can use the editor to perform queries without any issue - it's just explorer that goes kaboom.
We have SP2a installed on the server and on most (if not all) of the clients.
This is getting frustrating because it's a production server and we're having to reboot this to fix it.
View 12 Replies
View Related
Apr 9, 2008
Hi,
In a nutshell I'm unable to connect to SSRS within SSMS yet I can connect to SSIS, SSAS and the Database Engine within SSMS from the same named server instance ("BOODEMO")
"SQL Server 2005 Surface Area Configuration" reports that service status SSRS (DEMO) is running.
The only other problem that I have found which may be linked is that within "Reporting Services Configuration Manager BOODEMO" there is a red circled crossed next to "Report Manager Virtual Directory", yet this application has just recently reported that I successfully created a virtual directory.
Any help or constructive guidance would be greatly appreciated.
Thanks in advance,
Kieran.
View 8 Replies
View Related
Sep 15, 2015
Every time I start SSMS 2012 the "Connect to Server" box is partially obscured in that the top of it, the move bar can't be accessed. I've manually moved it using "alt+space" then "M" followed by the arrow keys, but it's getting annoying. Â Is there any way to change the initial start position of this box?Â
View 6 Replies
View Related
Oct 23, 2007
hi guys,
do you know if we can use sql authentication to connect to SSIS through SSMS. right now it's only windows authentication, and SQL authentication is grayed out.
Not sure if this question has already been answered because it sounds like easy question.
View 1 Replies
View Related
Nov 17, 2014
I am working with SSRS. I do have admin rights. I can connect to the url https://localhost/Reports and can create the new reports and subscription. Delete the reports and subscriptions.
But when I tried to connect to Reporting Services from SSMS, I am getting below error.
I used the windows authentication. It is showing that the user name or password is not valid or you don't have permission to access this server
I can connect to the database engine and Integration services but unable to connect to the Reporting services.
View 4 Replies
View Related
Apr 17, 2008
Hi,
I am able to run an SSIS script from BI Visual Studio no problem, I am also able to connect to SSIS within SSMS successfully. I have system access rights to the Database Engine of the same server name.
However I have a user who also has full system access rights to the Database Engine of the same server name. However he can only connect to the database engine, he cannot connect to SSIS within SSMS, but he can successfully execute a SSIS script within BI Visual Studio which is targeted to the same server name which he can€™t connect to within SSMS.
Any help would be greatly appreciated.
Kind Regards,
Kieran.
View 5 Replies
View Related
Jun 13, 2006
I recent installed a named instance of SSRS 2005 on a remote server. The server has a side by side install of SSRS 2000 and SSRS 2005, with the SSRS 2005 being a named instance. The server also has SSL and MS Sharepoint Portal Server installed.
When I try and connect to the SSRS 2005 instance with my client install of Mangement Studio, I get the error message:
"The underlying connection was closed: Could not establish a trust relationship for the SSL/TLS secure channel. (System.Web.Services)
Additional Information: The remote certificate is invalid according to the validation procedure. (System)."
Obviously, this is a SLL issue, but, not being a security guru, I have no clue on how to fix this. I do know the certificate is valid, not expired and properly working. Both installs of SSRS are set up using the SSL certificate. Also, I am not connecting to SSIS with Management Studio, as I heard there is a bug connecting to both SSRS and SSIS at the same time.
Anyone have any ideas?
Thanks!!
Jeff
View 6 Replies
View Related
Feb 19, 2015
Version: SQL SERVER 2012 enterprise edition and SP2.
Due to one of the security reason, I have changed default port 1433 to another port number in configuration manger tools->protocols for MSSQLSERVER->TCP/IP --> IP ALL section mention another port number.
After restarted service, SQL SSMS able to connect server itself and new port number also LISTENING.
But SQL client SSMS not connected to one of the PC side after changing default port.
View 3 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamics FINANCE) using SQL authentication from local SSMS, I get below error message.A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)I assigned a static port number to the named instance [dynamicsFINANCE]Â 1450. I also setup the firewall rule to allow access to Port 1450.
View 4 Replies
View Related
May 25, 2007
I have installed a SQL Server 2005 Standard Edition instance with SSIS on Window Server 2003 x64. From my PC, I am able to connect to the Integration Services on the server using Windows Authentication but not with a local SQL login - and the option to change authentication methods is greyed out.
Is it possible to remotely connect to SSIS using a SQL login rather than a Windows login? If so, any ideas or references for configuring it as such?
Thanks.
- Lance
View 1 Replies
View Related
Aug 1, 2007
Hi,
I have gone through so many kb articles to understanding the problem, but no luck as yet.
Here is the situation:
I have two dev servers : Server A and Server B. Both are set up in an identical fashion. Windows 2003 sp2, Sql Server 2005 sp1 Developer Edition, both are on the same domain, Both have all the three protocols enabled: Shared Memory, Tcpip, and Named Pipes in that order. I can ping both servers, and telnet using the default port. Both have only default instances. Both use the same domain user account for sql service. Both have the error in the log saying that spn could not be registered so authentication may fall back to NTLM.
Here is the issue: When I try to register Server A specifying tcp-ip connection, I am successful and I can see that the authentication is NTLM - is as expected. since the spn registration did not happen and since the sqlservice account is not a domain admin, the authentication used NTLM over tcp-ip. However, I try to register Server B specifying tcpip, I get a cannot generate sspi context error. Why did the authentication not fall back to NTLM as in Server A? From what I read in the KB articles, I asked our network admin to check up the spn, but he assures me that spn were never manually registered.
Can somebody throw more light on this issue?
Thanks
KRSE
View 1 Replies
View Related
May 18, 2015
Error: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA) (Microsoft.SqlServer.DTSRuntimeWrap)
Â
Here are the steps I followed:
To configure rights for remote users on Windows Server 2003 or Windows XP
View 10 Replies
View Related
Aug 31, 2015
I need to install SSIS/SSRS in SSMS. I have connected the SharePoint list view to excel for reporting purpose but due to data size the performances is very slow in excel and now I would like to connect the SharePoint List to SSIS/SSRS
I have windows 8, 64 bit system
I have installed SQL Server Management studio 2012 but I am unable to enable the Integration and Reporting Services
May be I have missed to choose the option during installation.
View 5 Replies
View Related
Aug 18, 2015
Basically, I am asking if it is possible to use SSMS (Query Analyzer window) with Informix. I am thinking linked server. If I have the ODBC driver installed on my workstation (win 7 pro VM workstation -- SSMS on same VM machine) is this doable? Do I just do the standard linked server routine or is there a special way (if it is even doable).
View 4 Replies
View Related
Jul 22, 2015
I've two instances(Default, Named[dynamicsFINANCE]) running on SQL server 2014. However, when I try to connect to named instance say (dynamicsFINANCE) using SQL authentication from local SSMS, I get below error message:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
I assigned a static port number to the named instance [dynamicsFINANCE] 1450. I also setup the firewall rule to allow access to Port 1450.
View 5 Replies
View Related
Oct 17, 2014
I designed the AlwaysOn wrong, but every time we fail over from primary server to another server, my applications cannot connect because the sql logins cannot connect to their default databases. Once I run the command to link the login with the user in the default database then the users are able to connect. Did I do something wrong when designing AlwaysOn?
View 9 Replies
View Related
Mar 9, 2006
I try to import my SSIS packages which are created using the Business Intelligent studio into SQL server 2005 but I cannot do that.
I am running SQL server 2005 enterprise edition.
Also when i tried to connect to Integration services using Object explorer, it only prompt me for server name. I cannot change the username and password which is disabled.
Then how am i supposed to connect to Integration services on a server in this case?
View 4 Replies
View Related
Dec 12, 2006
I'm having a problem connecting with a Java application but I CAN connect using my .Net application - the user name and password are the same for both (using the same database on SQL Server Express 2005).
The error I get is: "com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "CORNERS" requested by the login. The login failed." An interesing note - I get the same message if the database is not running.
SQL Server Express 2005 is installed in mixed mode.
Here is my connection string in the .Net appplication: <add key="connectString" value="Server=(local);UID=sa;PWD=myPasswd;Database=CORNERS" />.
These are my values in my Java app web.xml -
<init-param>
<param-name>DBDriver</param-name>
<param-value>com.microsoft.sqlserver.jdbc.SQLServerDriver</param-value>
</init-param>
<init-param>
<param-name>DBURL</param-name> <param-value>jdbc:sqlserver://localhostsqlexpress:1055;databaseName=CORNERS</param-value>
</init-param>
<init-param>
<param-name>DBUser</param-name>
<param-value>sa</param-value>
</init-param>
<init-param>
<param-name>DBPwd</param-name>
<param-value>myPasswd</param-value>
</init-param>.
And yes, the port is 1055 - I checked to find it.
I am using Microsoft SQL Server 2005 JDBC Driver 1.0 (sqljdbc_1.0.809.102).
Does anyone have any idea what is wrong so that the login fails in the Java application but works in the .Net application?
View 7 Replies
View Related
Apr 2, 2008
OK, I have all of my SS2k sproc scripts saved as
owner.sprocname.prc
Because EM scripted them out that way
Now that we are using MS, it doesn't recognize the script, it doesn't highlight the code, and doesn't connect to a server
Can a change this somewhere?
I've got all of my scripts in pvcs as *.prc and I'd rather not have to change it
Any ideas?
Brett
8-)
Hint: Want your questions answered fast? Follow the direction in this link
http://weblogs.sqlteam.com/brettk/archive/2005/05/25/5276.aspx
Add yourself!
http://www.frappr.com/sqlteam
View 1 Replies
View Related
Feb 14, 2006
Can I run SQL Server Management Studio (SSMS) from a workstation or do I need to Remote into the server? (SQL Server 2005 Standard Edition)
My workstation already has VS 2005 installed.
Thanks.
View 1 Replies
View Related
Sep 14, 2007
I installed Visual Studio over a year and a half ago when I became a Microsoft ISV. I have done all of my SQL Server work from within the Visual Studio framework and UI. I recently was asked to document how a customer's users would set up the customer's system using SQL Server 2005, but not having Visual Studio. I got the book Beginning SQL Server 2005 for Developers and immediately ran into a wall. Dewson (the author) talks about the SQL Server Management Studio. He says you get to it by Start > Programs > Microsoft SQL Server 2005 > Sql Server Management Studio. When I tried, I went Start > All Programs > Microsoft SQL Server 2005 > Configuration Tools.
I have reinstalled my SQL Server 2005 Developer's edition and installed SQL Server 2005 Standard edition every way I can see, but I still can't get SSMS to come up. What am I doing wrong?
I am running XP Pro 2002 with SP 2. It is on a thinkpad with P4-M 1.8 ghz and 512 mb RAM. My Add/Remove programs says I have SQL Server 2005, SQL Server 2005 Backward Compatibility, SQL Server Native Client, SQL Server Setup Support Files, and SQL Server VSS Writer installed.
Thanks,
Ron
View 8 Replies
View Related
Feb 11, 2007
Hello,
What version of SQL Server Management Studio exists after SP1 is installed? Can you tell if SP1 has been installed based on that?
Thanks.
View 1 Replies
View Related
Jan 29, 2008
Are you kidding me?
I can't create 1 object per file anymore AND I can't have the drop created along with the create
Are they forcing you to use ALTER?
What a piece of junk
View 7 Replies
View Related
Apr 2, 2008
Junk
OK, I have all of my SS2k sproc scripts saved as
owner.sprocname.prc
Because EM scripted them out that way
Now that we are using MS, it doesn't recognize the script, it doesn't highlight the code, and doesn't connect to a server
Can a change this somewhere?
I've got all of my scripts in pvcs as *.prc and I'd rather not have to change it
Any ideas?
View 5 Replies
View Related
May 4, 2014
I installed Red Gate's SQL Search and now I have an Add-ins icon. From the Icon I got to a list of tools, one of which is SSC's script library.
When I downloaded it I got this file "SQLScripts.utmcsr&__utmv=-&__utmk=243779397" which did not trigger an installer when clicking on it. How do I add it.
View 3 Replies
View Related
Nov 14, 2006
Hello
Can any one of u tell me isthere any SSMS when we install only SQL Express independent of SQL Server
View 6 Replies
View Related
Jun 18, 2007
I have a New default instance of SQL2k5 installed and i am trying to setup access to the this via a vpn.
The VPN is setup and allows access to the server and can T/S to the server and perform everything all ok.
When trying to connect over the VPN with SSMS installed on my laptop I am able to connect using Windows authentication only by using Named Pipes. To accomplish this i perform a Net Use ..... and everything works fine.
However if i specify in the connection tab to use TCP/IP it fails with an unknown username or password. The Event Viewer on the server shows this and for what ever reason the username / pwd is that of my laptop and not of the account used in the VPN setup or the net use.
Also if i try to connect to the SQL Server over the VPN using VS 2005 it also gives the same issue.
I need to get this sorted so that TCP is able to be used.
Thx in advance
View 3 Replies
View Related
Jan 29, 2008
Are they kidding?
I can't create one file per procedure and the DROPS are only created separately?
Are they forsing you to use ALTER as well?
Or am I missing something obvious?
Brett
8-)
Hint: Want your questions answered fast? Follow the direction in this link
http://weblogs.sqlteam.com/brettk/archive/2005/05/25/5276.aspx
Add yourself!
http://www.frappr.com/sqlteam
View 6 Replies
View Related
Mar 24, 2008
Hi all,
I created a database on a remote server and trying to manage the database using a local SSMS. I am able to see the tables and other objects of the old databases residing on the same remote server, but not the new database. I have created the users similar to the other databases, have the exact same roles as the other databases.Not sure what I am missing here. Any suggestions??
Thank you
View 3 Replies
View Related
Dec 12, 2007
Is it possible someone could let me know the exact differences between the SSMS Express Edition and SSMS Standard Edition?
Just simply what you cannot do in the Express edition but can in the full edition.
Thanks
View 7 Replies
View Related
