I am using SQL Server 2000. I have a somewhat large query and hope someone could help me with it. (Man, there needs to be a way to use colors...) The bolded parts of the query need to be replaced by the underlined part. I can't say 'b.HW' because of the scope of the inline query and that they are all on the same level. I've been told I need to change to a nested subquery, but can't for the life of me figure out how to do that. Can someone please show me? The current query: SELECT x.SSN,x.RealName,x.BudgetCode,x.TH,b.HW,x.HP,z.HL,x.NHW,x.FSLAOT,y.HHW AS AH,y.NHH,CASE WHEN x.TH < x.HP THEN 'XX' WHEN x.TH > x.HP THEN x.NHW - x.HP - y.NHH WHEN x.TH <= x.HP THEN 0 END AS SOT,CASE WHEN x.TH > x.HP THEN x.NHW - x.HP - y.NHH + x.FSLAOT WHEN x.TH <= x.HP THEN 0 END AS AO FROM(SELECT a.SSN,a.RealName,a.BudgetCode,SUM(a.Hours) AS TH,CASE WHEN SUM(a.hours) > 40 THEN (SUM(a.hours) - 40) * 1.5 WHEN SUM(a.hours) <= 40 THEN 0 END AS FSLAOT,CASE WHEN SUM(a.hours) >= 40 THEN 40 WHEN SUM(a.hours) < 40 THEN SUM(a.hours) END AS NHW,32 AS HP FROM dbo.ActivitiesInCurrentFiscalYear aWHERE a.ItemDate BETWEEN startdate and enddate AND a.ScheduleType = 1 AND a.EmployeeType = 2GROUP BY a.SSN, a.RealName, a.BudgetCode) x LEFT OUTER JOIN (SELECT a.SSN,a.RealName,a.BudgetCode,SUM(a.Hours) AS HHW,CASE WHEN SUM(a.Hours) >= 8 THEN 8 WHEN SUM(a.Hours) < 8 THEN SUM(a.Hours) END AS NHH FROM dbo.ActivitiesInCurrentFiscalYear a, dbo.Holidays hWHERE a.ItemDate = h.HolidayDate AND a.ItemDate BETWEEN startdate and enddate AND a.EmployeeType = 2 AND a.ScheduleType = 1GROUP BY a.SSN, a.RealName, a.BudgetCode) y ON x.SSN = y.SSN AND x.RealName = y.RealName AND x.BudgetCode = y.BudgetCode LEFT OUTER JOIN (SELECT a.SSN,a.RealName,a.BudgetCode,SUM(a.Hours) AS HLFROM dbo.ActivitiesInCurrentFiscalYear aWHERE a.ItemDate BETWEEN startdate and enddate AND a.EmployeeType = 2 AND a.ScheduleType = 1 AND (a.program_code = '0080' OR a.program_code = '0081')GROUP BY a.SSN, a.RealName, a.BudgetCode) z ON x.SSN = z.SSN AND x.RealName = z.RealName AND x.BudgetCode = z.BudgetCode LEFT OUTER JOIN (SELECT a.SSN,a.RealName,a.BudgetCode,SUM(a.Hours) AS HWFROM dbo.ActivitiesInCurrentFiscalYear aWHERE a.ItemDate BETWEEN startdate and enddate AND a.EmployeeType = 2 AND a.ScheduleType = 1 AND NOT (a.program_code = '0080' OR a.program_code = '0081')GROUP BY a.SSN, a.RealName, a.BudgetCode) b ON x.SSN = b.SSN AND x.RealName = b.RealName AND x.BudgetCode = b.BudgetCode)
Original code (works in Sql Server 2000 but has error in Sql Server 2005) -- AND A_ED.EFFDT <= SUBSTRING(CONVERT(CHAR,GETDATE(),121), 1, 10))
Error message in Sql Server 2005 -- Server: Msg 8180, Level 16, State 1, Line 38 Statement(s) could not be prepared. Server: Msg 107, Level 16, State 1, Line 38 The column prefix 'Tbl1001' does not match with a table name or alias name used in the query.
Corrected code --
AND SUBSTRING(CONVERT(CHAR,A_ED.EFFDT,121), 1, 10) <= SUBSTRING(CONVERT(CHAR,GETDATE(),121), 1, 10))
hello friends.. I am newbie for sql server...I having a problem when executing this procedure .... ALTER PROCEDURE [dbo].[spgetvalues] @Uid intASBEGIN SET NOCOUNT ON; select DATEPART(year, c.fy)as fy, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1% JRF' ) as survivorship, (select contribeamount from wh_contribute where and contribename like 'Gross Earnings' and ) as ytdgross, (select contribeamount from wh_contribute where and contribename like 'Retire-Plan B-1.5% JRP') as totalcontrib, from wh_contribute c where c.uid=@Uid Order by fy Asc .....what is the wrong here?? " Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."please reply asap...
I am getting 2 resultsets depending on conditon, In the secondconditon i am getting the above error could anyone help me..........CREATE proc sp_count_AllNewsPapers@CustomerId intasdeclare @NewsId intset @NewsId = (select NewsDelId from NewsDelivery whereCustomerId=@CustomerId )if not exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count( NewsPapersId) from NewsPapersendif exists(select CustomerId from NewsDelivery whereNewsPapersId=@NewsId)beginselect count(NewsDelId) from NewsDelivery whereCustomerid=@CustomeridendGO
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
while running the following query.
SELECT DISTINCT EmployeeDetails.FirstName+' '+EmployeeDetails.LastName AS EmpName,
LUP_FIX_DeptDetails.DeptName AS CurrentDepartment,
LUP_FIX_DesigDetails.DesigName AS CurrentDesignation,
LUP_FIX_ProjectDetails.ProjectName AS CurrentProject,
ManagerName=(SELECT E.FirstName+' '+E.LastName
FROM EmployeeDetails E
INNER JOIN LUP_EmpProject
ON E.Empid=LUP_EmpProject.Empid
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid = LUP_FIX_ProjectDetails.Projectid
WHERE LUP_FIX_ProjectDetails.Managerid = E.Empid)
FROM EmployeeDetails
INNER JOIN LUP_EmpDepartment
ON EmployeeDetails.Empid=LUP_EmpDepartment.Empid
INNER JOIN LUP_FIX_DeptDetails
ON LUP_EmpDepartment.Deptid=LUP_FIX_DeptDetails.Deptid
AND LUP_EmpDepartment.Date=(SELECT TOP 1 LUP_EmpDepartment.Date
FROM LUP_EmpDepartment
WHERE EmployeeDetails.Empid=LUP_EmpDepartment.Empid
ORDER BY LUP_EmpDepartment.Date DESC)
INNER JOIN LUP_EmpDesignation
ON EmployeeDetails.Empid=LUP_EmpDesignation.Empid
INNER JOIN LUP_FIX_DesigDetails
ON LUP_EmpDesignation.Desigid=LUP_FIX_DesigDetails.Desigid
AND LUP_EmpDesignation.Date=(SELECT TOP 1 LUP_EmpDesignation.Date
FROM LUP_EmpDesignation
WHERE EmployeeDetails.Empid=LUP_EmpDesignation.Empid
ORDER BY LUP_EmpDesignation.Date DESC)
INNER JOIN LUP_EmpProject
ON EmployeeDetails.Empid=LUP_EmpProject.Empid
AND LUP_EmpProject.StartDate=(SELECT TOP 1 LUP_EmpProject.StartDate
FROM LUP_EmpProject
WHERE EmployeeDetails.Empid=LUP_EmpProject.Empid
ORDER BY LUP_EmpProject.StartDate DESC)
INNER JOIN LUP_FIX_ProjectDetails
ON LUP_EmpProject.Projectid=LUP_FIX_ProjectDetails.Projectid
I've running the below query for months ans suddenly today started getting the following error :"Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression."
Any ideas as to why??
SELECT t0.DocNum, t0.Status, t0.ItemCode, t0.Warehouse, t0.OriginNum, t0.U_SOLineNo, ORDR.NumAtCard, ORDR.CardCode, OITM_1.U_Cultivar, RDR1.U_Variety, (SELECT OITM.U_Variety FROM OWOR INNER JOIN WOR1 ON OWOR.DocEntry = WOR1.DocEntry INNER JOIN OITM INNER JOIN OITB ON OITM.ItmsGrpCod = OITB.ItmsGrpCod ON WOR1.ItemCode = OITM.ItemCode WHERE (OITB.ItmsGrpNam = 'Basic Fruit') AND (OWOR.DocNum = t0.DocNum)) AS Expr1, OITM_1.U_Organisation, OITM_1.U_Commodity, OITM_1.U_Pack, OITM_1.U_Grade, RDR1.U_SizeCount, OITM_1.U_InvCode, OITM_1.U_Brand, OITM_1.U_PalleBase, OITM_1.U_Crt_Pallet, OITM_1.U_LabelType, RDR1.U_DEPOT, OITM_1.U_PLU, RDR1.U_Trgt_Mrkt, RDR1.U_Wrap_Type, ORDR.U_SCCode FROM OWOR AS t0 INNER JOIN ORDR ON t0.OriginNum = ORDR.DocNum INNER JOIN RDR1 ON ORDR.DocEntry = RDR1.DocEntry AND t0.U_SOLineNo - 1 = RDR1.LineNum INNER JOIN OITM AS OITM_1 ON t0.ItemCode = OITM_1.ItemCode WHERE (t0.Status <> 'L')
I have a scalar function, which calculates the similarity of two strings. I use the following query, to compare the entries of one table against the value 'Test' and return the entries, which have a value > 50:
;WITH cte1 AS ( SELECT b.FirstName, (SELECT fn_similarity('Test', b.FirstName)) AS [Value], b.LastName FROM [AdventureWorks2012].[Person].[Person] b )
SELECT * FROM cte1 WHERE [Value] > 50.00 ORDER BY [Value] DESC
Now I want to use this query against the first 50 entries of the [Person] table, so that the resultset includes all the values of the first 50 persons and the entries, which are similar to them.
At the moment I use a WHILE-loop and write the five single resultsets in a temporary table. Is there another way / a better way, maybe via a join?
Microsoft SQL Server 2000 - 8.00.2191 (Intel IA-64)
Mar 27 2006 11:51:52
Copyright (c) 1988-2003 Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 5.2 (Build 3790: Service Pack 1)
sp_dboption 'BB_XXXXX'
The following options are set:
-----------------------------------
trunc. log on chkpt.
auto create statistics
auto update statistics
OK, the problem is that if a run the below query in server01, i get error 512:
Msg 512, Level 16, State 1, Line 1
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression.
But, if run the same query in the server02, the query work fine -.
I know that I can use IN, EXISTS, TOP, etc ... but I need understand this behavior.
I am trying to add the results of both of these queries together:
The purpose of the first query is to find the number of nulls in the TimeZone column.
Query 1:
SELECT COUNT(*) - COUNT (TimeZone) FROM tablename
The purpose of the second query is to find results in the AAST, AST, etc timezones.
Query 2:
SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')
Note: both queries produce a whole number with no decimals. Ran individually both queries produce accurate results. However, what I would like is one query which produced a single INT by adding both results together. For example, if Query 1 results to 5 and query 2 results to 10, I would like to see a single result of 15 as the output.
What I came up with (from research) is:
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST'))
I get a msq 102, level 15, state 1 error.
I also tried
SELECT ((SELECT COUNT(*) - COUNT (TimeZone) FROM tablename) + (SELECT COUNT (TimeZone) FROM tablename WHERE TimeZone NOT IN ('EST', 'MST', 'PST', 'CST')) as IVR_HI_n_AK_results
but I still get an error. For the exact details see:
[URL]
NOTE: the table in query 1 and query 2 are the same table. I am using T-SQL in SQL Server Management Studio 2008.
Hello, Here is the below query I am running at server A and getting this below error. If I am running the same query in Server B and running fine without any error. My question is do I need to do any server configuration?. Or any solution for this issue. I really appreciate your help. Thanks, Ravii
UPDATE Leap.dbo.CIB SET credit_status = c.credit_status FROM DNT02.oesd.dbo.credit_line c WHERE c.effective_date = (SELECT MAX(c1.effective_date) FROM DNT02.oesd.dbo.credit_line c1 WHERE c.account_num = c1.account_num ) AND Leap.dbo.CIB.account_num = c.account_num
Server: Msg 8180, Level 16, State 1, Line 1 Statement(s) could not be prepared. Server: Msg 107, Level 16, State 1, Line 1 The column prefix 'c' does not match with a table name or alias name used in the query.
Below query. its getting more time to exec and got deadlock. So, query to avoid deadlock.
SELECT m1.Value AS InterfaceName, m1.MessageDateTime, m2.GroupId, COUNT(mError.Id) AS ErrorCount FROM ( SELECT m1.Value, MAX(m1.MessageDateTime) as MessageDateTime FROM Message m1 WHERE m1.TypeId = 9 AND (m1.Value LIKE 'F02' ) GROUP BY m1.Value
I have some relatively simple SQL that acts differently between SQL Server 2000 and 2005. Although it is easy to fix I'd like to know if this difference is expected (documented) or a bug, and if there is perhaps a setting/switch I can use to avoid a code review of hundreds of stored procs to look for similar scenarios. Executed the following script in SQL Server 2005 –CREATE TABLE #Floats(FloatID INT IDENTITY,FloatNumber FLOAT NOT NULL)DECLARE @sngCounter floatSET @sngCounter = 20WHILE @sngCounter >= 0BEGININSERT INTO #Floats ( FloatNumber ) VALUES( @sngCounter )SET @sngCounter = @sngCounter - 1ENDSELECT * FROM (SELECT TOP 100 PERCENT * FROM #Floats ORDER BY FloatNumber) AS FloatNumbersDROP TABLE #FloatsGOProduces the following resultset –FloatID FloatNumber----------- -----------1 202 193 184 175 166 157 148 139 1210 1111 1012 913 814 715 616 517 418 319 220 121 0In SQL Server 2000 resultset is this –FloatID FloatNumber----------- --------21 0.020 1.019 2.018 3.017 4.016 5.015 6.014 7.013 8.012 9.011 10.010 11.09 12.08 13.07 14.06 15.05 16.04 17.03 18.02 19.01 20.0
I am trying to get a date diff in a named calculation using inner join I am getting
Subquery returned more than 1 value. This is not permitted when the subquery follows =, !=, <, <= , >, >= or when the subquery is used as an expression. #
I have checked online and have been able to get some of my codes right by using the where condition in place of the inner join, but I have not been able to work around the datediff one
(select DATEDIFF(day,TDate,[DID]) FROM [dv].[dbo].[Dail] as D inner join [dv].[dbo].[ANT] as A on a.AID = d.AID)
I am attempting to Insert multiple rows in a table by passing DataTable to a Stored Proc. My code is the same as the examples on the net, however when I execute the code I receive the Subquery returned more than 1 value error.
I first created up a User-Defined Table Type
My stored proc is as follows:
ALTER PROCEDURE [KCC].[Insert_MaterialJobMtl] @MtlTblMaterialType READONLY AS BEGIN Set NOCOUNT ON;
I'm having trouble with the UDF's I had in SQL 2000 that were migrated to SQL 2005 under the SCALAR FUNCTION item. Before in 2000 you just created the UDF, named it and saved. IN SQL 2005 you create/modify and then have to save it as a .SQL file to a folder. First of all, what folder should it go to so that all can use and secondly, when I do this and run the functions it doesn't work... I need to modify the scalar function and save it with out saving to a .SQL file. How do I do this or is this the new way to create/modify functions. Any help is much appreciated thanks
DOC_NO // REV_NO // FILE_NAME ABC123 // A // abc123.pdf ABC123 // B // abc123_2.docx ABC124 // A // abc124.xlsx ABC124 // A // - ABC125 // A // abc125.docx ABC125 // C // abc125.jpg ABC125 // C // abc125.docx ABC125 // C // - ABC126 // 0 // - ABC127 // A1 // abc127.xlsx ABC127 // A1 // abc127.pdf
I'm looking to select all rows where the DOC_NO and REV_NO appear only once.(i.e. the combination of the two values together, not any distinct value in a column)
I have written the sub query to filter the correct results;
SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1
I now need to strip out the records which have no file (represented as "-" in the FILE_NAME field) and select the other fields (same table - for example, lets just say "ADD1", "ADD2" and "ADD3")
I was looking to put together a query like;
SELECT DOC_NO, REV_NO, FILE_NAME, ADD1, ADD2, ADD3 FROM [MYTABLE] WHERE FILE_NAME NOT LIKE '-' AND DOC_NO IN (SELECT DOC_NO, REV_NO FROM [MYTABLE] GROUP BY DOC_NO, REV_NO HAVING COUNT(*) =1)
But of course, DOC_NO alone being in the subquery select is not sufficient, as (ABC125 /A) is a unique combination, but (ABC125 /C) is not, but these results would be pulled in.
I also cannot simply add an additional "AND" clause on its own to make sure the REV_NO value appears in the subquery, because it is highly repetitive and would have to specifically match the DOC_NO)
What is the easiest way of ensuring that I only pull in the records where both the DOC_NO and REV_NO (combination) are unique, or is there a better way of putting this select together altogether?
I'm trying to do something like the code below, but it's saying "specified cast is not valid" If i change the value returned to an "int", it works fine. My issue is, i'd like to get the value returned with more accuracy than an int as there will be 2 decimal places.protected float getProjectHours(string project) {string selectCmd = "SELECT SUM(hours) FROM tasks WHERE project=@project"; string strConnection = ConfigurationManager.ConnectionStrings["TimeAccountingConnectionString"].ConnectionString;SqlConnection myConnection = new SqlConnection(strConnection); SqlCommand myCommand = new SqlCommand(selectCmd, myConnection);myCommand.Parameters.Add(new SqlParameter("@project", SqlDbType.VarChar));myCommand.Parameters["@project"].Value = project; myConnection.Open();float total = (float)myCommand.ExecuteScalar(); myConnection.Close(); return total; }
Hi everyone, I am getting that infamous message on an INSERT Sql query. I am doing everything right by the looks of it. All variables are either passed in through a custom form, or else declared and initialised in the body of the script. I post the relevent code below: SQLsqlInsertEmail = "INSERT INTO CandidateLogins (SiteID, LoginName, CandidateEmail, DateRegistered) " & _" VALUES (@SiteID, @LoginName, @CandidateEmail, @DateRegistered); SELECT SCOPE_IDENTITY()"Try sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@SiteID", SqlDbType.Int)) sqlSetCandidateEmail.Parameters("@SiteID").Value = SiteID sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@LoginName", SqlDbType.VarChar)) sqlSetCandidateEmail.Parameters("@LoginName").Value = userName sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@CandidateEmail", SqlDbType.VarChar)) sqlSetCandidateEmail.Parameters("@CandidateEmail").Value = email sqlSetCandidateEmail.Parameters.Add(New SqlParameter("@DateRegistered", SqlDbType.DateTime)) sqlSetCandidateEmail.Parameters("@DateRegistered").Value = DateRegistered sqlSetCandidateEmail = New SqlCommand(sqlInsertEmail, C4LConnection) C4LConnection.Open() CandidateID = sqlSetCandidateEmail.ExecuteScalar() Catch Exp As SqlException lblResults.Visible = True lblResults.Text = "Unable to Register Jobseeker: " & Exp.MessageFinallyC4LConnection.Close()End Try All the variables passed into the SQL statement are initialised, with SiteID beign set to '0', rather than Null (none of the fields are Nullable in the database table) and I have checked that the SqlDbType's correspend to the Table Definition So far as I can discern, everything is correct and as can be seen, I am not using a stored procedure in this instance, but the script falls over be producing the error message "Must Declare Scalar @SiteID", even though SiteID is declared as Int32 further up in the script. Any help would be appreciated.
I want to add four fields of a table and place the toatal in a new field.Also I wanna have the average of the fields.
For e.g I have created a marksheet having four subjects.Now I wanna add the subjects and find the average of the subjects and place them in two different fields in the same table along with the respective names in the table.Pls help.
My question is: can I use GETDATE function in  scalar UDF as below:
CREATE FUNCTION dbo.GetDateFunction() RETURNS DateTime AS BEGIN Â Â RETURN GetDate(); END
I have seen this UDF definition in tutorial,but I thought non-deterministic functions can not be used in UDF.
I also looked at two sites to find out but both says differently:
Technet: [URL] ... states that functions that return different values on each call can not be used in UDF.
MSDN: [URL] .... states that  nondeterministic built-in functions can be used in Transact-SQL user-defined functions and in the list of functions GETDATE is listed.
Must declare the scalar variable "@Id_CostEmployee".
I'm tired of "googling" this error, and I've tried all the advices, nothing... I don't know what is happening here, I have 5 other forms, all simillar and they all work!
Im using the following code in my application. Is it redundent to add the "Top 1" to the select or does it help performance? Thanks string strSQL = "SELECT TOP 1 c.CusId " + "FROM COCUS c " + "LEFT JOIN CONOTITM n ON c.NotId = n.NotId " + "WHERE c.CusId NOT IN(SELECT CusId FROM RDK_PROSPECT_LOCK WHERE EmpId <> '" + USER.ID() + "') " + "ORDER BY n.DateUpdate, c.DateUpdate ASC";
I'm making an ecommerce web app from following the Apress "Beginning ASP.Net 2 E-commerce with C#" book, and when I implement a stored procedure (I made a mdf DB in the app_Data folder), I get the following message: Must declare the scalar variable @CategoryIDThe code used to obtain this error is below: CREATE PROCEDURE DeleteCategory(@CategoryINT int)ASDELETE FROM CategoryWHERE CategoryID = @CategoryID I get this error with every Stored Procedure I try to implement. What should I do to fix this? In SQL Server 2k5 Management Studio, this problem does not present itself.
Hi with the code below I am getting the error Error inserting record. Must declare the scalar variable "@contractWHERE" I removed @contract and it then gave me the error Error inserting record. Must declare the scalar variable "@zipWHERE" I was wondering if some can point me in the right direction for fixxing this protected void cmdUpDate_Click(Object sender, EventArgs e) { //Define ADO.NET Objects. string updateSQL; updateSQL = "UPDATE Authors SET "; updateSQL += "au_id=@au_id, au_fname=@au_fname, au_lname=@au_lname, "; updateSQL += "phone=@phone, address=@address, city=@city,state=@state, "; updateSQL += "zip=@zip, contract=@contract"; updateSQL += "WHERE au_id@au_id_original"; SqlConnection con = new SqlConnection(connectionString); SqlCommand cmd = new SqlCommand(updateSQL, con); //Add the parameters. cmd.Parameters.AddWithValue("@au_id", txtID.Text); cmd.Parameters.AddWithValue("@au_fname", txtFirstName.Text); cmd.Parameters.AddWithValue("@au_lname", txtLastName.Text); cmd.Parameters.AddWithValue("@phone", txtPhone.Text); cmd.Parameters.AddWithValue("@address", txtAddress.Text); cmd.Parameters.AddWithValue("@city", txtCity.Text); cmd.Parameters.AddWithValue("@state", txtState.Text); cmd.Parameters.AddWithValue("@zip", txtZip.Text); cmd.Parameters.AddWithValue("@contract", Convert.ToInt16(chkContract.Checked)); cmd.Parameters.AddWithValue("au_id_original", lstAuthor.SelectedItem.Value); //Try to open the database and execute the update try { con.Open(); int updated = cmd.ExecuteNonQuery(); lblStatus.Text = updated.ToString() + " records inserted."; } catch (Exception err) { lblStatus.Text = "Error inserting record. "; lblStatus.Text += err.Message; } finally { con.Close(); } } }
I have a stored procedure that I'm trying too, and must figure out how to convert it to a view. The stored procedure uses two scalar variable for a date range in the WHERE CLAUSE (@StartDate and @EndDate). What can we do in a view if we cannot hard code date ranges? If I use the date field (Paydate) in the view then I cannot get a sum of the Payamt. I appreciate your help.
