I have three script component A,B, C. A reads certain data from a table. B inserts records into a .txt file when the recordtype = 1. C inserts records into same .txt file when the recordtype = 0. Now I receive a script comp error for C as follows.
at System.IO.StreamWriter.CreateFile(String path, Boolean append)
at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize)
at System.IO.StreamWriter..ctor(String path, Boolean append)
at ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54.ScriptMain.PreExecute() in dts://Scripts/ScriptComponent_6bda9d13fce34f90ac6315546c8d0d54/ScriptMain:line 19
at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.PreExecute()
We have built a custom component that is run in a dataflow contained in a sequence container, which in turn is contained in a loop. Transactions are enabled on the sequence container in such a way that if one step in the loop fails, that step is rolled back but the loop continues. Now, whenever anything happens causing a rollback in one of the iterations, sometimes the call to AcquireConnection in the next iteration will fail with the following error:
Error: 2007-03-25 09:47:31.98 Code: 0xC0047062 Source: KODPLAN Surrogate Key KO_ID [8204] Description: System.Runtime.InteropServices.COMException (0x80131904): Exception from HRESULT: 0x80131904 at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90.AcquireConnection(Object pTransaction) at Intellibis.SqlServer.Dts.SurrogateKeyTransform.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90wrapper, Object transaction) End Error
Is there a way to avoid this? It causes that particular iteration to fail as well as the one causing the rollback.
I've ran into trouble while creating a rather simple transformation script component (one input, one output). The only thing it has to do is test the values coming from it's input rows and set the values of the output rows according to some rules; something like:
Code Block
Public Overrides Sub InputBrowser_ProcessInputRow(ByVal Row As InputBrowserBuffer)
If Row.UserAgent.Contains("MSIE") Then 'test input Row.BrowserName = "Internet Explorer" 'set output End If
End Sub
This raises an "Object reference not set to an instance of an object." exception. Commenting out the input (Row.UserAgent) solves the exception, but I actually do need to test the contents of the input row (and by leaving only the output manipulation, the script won't reach it's end, the components remain yellow). What can I do about this?
I have OLE DB Connection to Access database using Jet 4.0 provider. I have a data flow task in package. In this data flow task, I have an OLE DB source. This source uses above mentioned connection.
When this data flow task is not a part of transaction, it works fine. But when I set "TransactionOption" property to "Required", the OLE DB source returns following error. [OLE DB Source [1]] Error: The AcquireConnection method call to the connection manager "databasename" failed with error code 0xC001A004.
I have checked Distributed Transaction Cordinator running. I have some other package running fine which uses transactions but does have OLE DB source.
I have also tried setting "RetainSameConnection" property of a connection to TRUE. But still it is failing.
In short, I am not able to execute OLE DB source in side transaction.
I call the datareader using a sqlCommand that I programmatically build and it accesses the database fine. I can use the exact SQL command that I generate and I can get a result when i run it in SQL Management Studio. When I run the application and try to access the datareader, it throws an exception whose message is quite frustratingly, <column name>, or in this case "image_URL". Anyone have any idea what might be causing such an ambiguous error?
Hi ,I have this querypaprojnumber is varcharpatx500 is textpalineitemseq is intselect Paprojnumber,Patx500,max(palineitemseq) from pa02101,pa01601wherepa02101.pabillnoteidx=pa01601.pabillnoteidx group bypaprojnumber,patx500it throws this errorServer: Msg 306, Level 16, State 2, Line 1The text, ntext, and image data types cannot be compared or sorted,except when using IS NULL or LIKE operator.Thanks a lot for your help.AJ
while (resultSet.next()) { System.out.println(resultSet.getDate("end_date")); }
The date field is nullable, and the records in the database are currently null. But when I run this program, I get the following exception when using version 1.2 of the MS JDBC Driver:
com.microsoft.sqlserver.jdbc.SQLServerException: The conversion from int to DATE is unsupported. at com.microsoft.sqlserver.jdbc.ServerDTVImpl.getValue(Unknown Source) at com.microsoft.sqlserver.jdbc.DTV.getValue(Unknown Source) at com.microsoft.sqlserver.jdbc.Column.getValue(Unknown Source) at com.microsoft.sqlserver.jdbc.Column.getValue(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerResultSet.getDate(Unknown Source) at com.microsoft.sqlserver.jdbc.SQLServerResultSet.getDate(Unknown Source) at jdbc.main(jdbc.java:38) Exception in thread "main"
This started happening when we upgraded to the new driver. Any ideas why?
I have a table in sql server 2000 which has a column whose name starts with a number("2ndName").I have a c# code which updates the table by filling a Dataset.When I issue an update, it throws the following error:-"Incorrect Syntax near 2"Query I use to build the adapter is "SELECT id, Name, [2ndName] FROM MyTBL WHERE 1 = 3" and the statement issued to update is "objAdapter.Update(objDSDB, "MyTBL")" when it throws the error "Incorrect Syntax near 2".Any help to resolve this is appreciated.Thanks in advance.Jai
I'm inserting records from a table to another table, having multiple columns
SampleQuery :
insert into tableB (col1,col2....col10) select col1,col2....col10 from tableA
* while executing this query im getting error. (like varchar cant convert to numberic) * Here I have no clue in which column it is * also dont know which row causes it
we've been having this ancient database with old accounting data running in suspect mode since as long as I can remember (I started working here a year ago), and finally I had some time on my hands so I thought I'd try to get it online again. However I'm running in to problems:
DBCC CHECKDB (myDBName) gives this error: Msg 926, Level 14, State 1, Line 1 Database 'myDBName' cannot be opened. It has been marked SUSPECT by recovery. See the SQL Server errorlog for more information.
Running sp_helpdb only does not display the suspect database and sp_helpdb 'myDBName' gives this error even though I'm a system administrator: No permission to access database 'myDBName'.
It's possible that I might be able to dig up a backup but that would be quite tedious. Is it possible to bring the database to a state where I'm able to do a CHECKDB at least...?
-- Lumbago "Real programmers don't document, if it was hard to write it should be hard to understand"
I am trying to execute a stored procedure on Server1 which creates an excel report on a share of Server2:
The following error message is thrown: Saving of scheduled report(s) to Excel file failed : 203 SaveReportToExcel() in TlRptToFile.RptExcel failed in sproc_SaveReportAsFile - TLRptXL::SaveReportToExcel - Connection to Database failed for Analytics DataBase Server : TKTALSQL3, Application Server: and DataBase : tlAnalytics : Windows Error - The system could not find the environment option that was entered.
A DCOM component on Server1 runs the stored procedure that creates the excel report. The account under which DCOM component runs is a member of 'Administrators' group on both Server1 and Server2. Checked permissions on the shares. Account is a local Admin on both Server1 and Server2. Account under which SQLServer and ServerAgent runs is also an Admin on these shares (implicitly as part of 'Administrators' group).
I am manually able to create an excel/text file on the Server2 share while accessing it from Server1, though.
Hi, My server configuration is Intel Xeon(R) X5355 @ 2.66GHz, 3.75 GB RAM Win 2k3
I have been receiving the above mentioned error when I try to use the out of the box feature of "Export To Excel" provided in the Reporting Services, the reports are hosted on MOSS 2007 using the Reporting Services Add-In. The number of pages generated by the report is 500+, so I don't think exporting a report of around 500 - 1000 should give out a memory exception since we have sufficient RAM on the server.
Not sure if there's a GP 8.0 forum, so giving this one a go.
I've added an AFTER UPDATE trigger to the RM00101 table (customer master) in a Great Plains 8.0 SQL Server 2000 SP4 DB. The trigger assigns field values to variables, constructs an update query, and executes the query on a table in a linked SQL Server 2005 DB.
The trigger works fine when fired as a result of a direct field update made through Enterprise Manager. However, when the same update is made through the Great Plains GIU (customer card window), an exception error is thrown:
"Unhandled database exception: A Save operation on table €˜RM_Customer_MSTR€™ failed accessing SQL data
EXCEPTION_CLASS_DB DB_ERR_SQL_DATA_ACCESS_ERR€?
The odd thing is that if I drop the trigger from the RM00101 table, the exception error still occurs. Not just on the record originally updated, but on all records and all fields within the record.
Code for the trigger follows:
SET QUOTED_IDENTIFIER ON GO SET ANSI_NULLS ON GO
CREATE TRIGGER CTrig_Logic_Update_Customer ON RM00101
AFTER UPDATE AS
IF UPDATE(CUSTNMBR) or UPDATE(CUSTCLAS) or UPDATE(CNTCPRSN) or UPDATE(STMTNAME) or UPDATE(SHRTNAME) or UPDATE(TAXSCHID) or UPDATE(ADDRESS1) or UPDATE(ADDRESS2) or UPDATE(ADDRESS3) or UPDATE(CITY) or UPDATE(STATE) or UPDATE(ZIP) or UPDATE(PHONE1) or UPDATE(FAX) or UPDATE(SLPRSNID) or UPDATE(PYMTRMID) or UPDATE(PRCLEVEL) or UPDATE(SALSTERR) or UPDATE(INACTIVE) or UPDATE(HOLD) or UPDATE(CRLMTAMT)
BEGIN
DECLARE @Server_Name Varchar(25), @Logic_DB_Name Varchar(25), @SQLStr nvarchar(1000), @CustomerN int, @SICCode int, @ARContact Varchar(35), @LongName Varchar(50), @CustomerName Varchar(24), @SalesTaxCode Int, @AddrLine1 Varchar(40), @AddrLine2 Varchar(40), @AddrLine3 Varchar(40), @City Varchar(30), @StateProv Varchar(4), @PostalCode Varchar(15), @TelephoneN Varchar(25), @FaxTelephoneN Varchar(25), @SalespersonN Int, @TermsCode Varchar(60), -- Put the customer terms into the CommentN1 field @CustRateSched Int, @SalesAreaCode Int, @InactivePurge Tinyint, @CreditStatus Tinyint, @CreditLimit Int
------- Get the new Customer data from Inserted table
SELECT @CustomerN = CAST(RTRIM(i.CUSTNMBR) as Integer), @SICCode = ISNULL((SELECT Dex_Row_ID FROM RM00201 WHERE RM00201.CLASSID = i.CUSTCLAS),0), @ARContact = RTRIM(i.CNTCPRSN), @LongName = RTRIM(i.STMTNAME), @CustomerName = RTRIM(i.SHRTNAME), @SalesTaxCode = ISNULL((SELECT Dex_Row_ID FROM TX00101 WHERE TX00101.TAXSCHID = i.TAXSCHID),0), @AddrLine1 = RTRIM(i.ADDRESS1), @AddrLine2 = RTRIM(i.ADDRESS2), @AddrLine3 = RTRIM(i.ADDRESS3), @City = RTRIM(i.CITY), @StateProv = RTRIM(LEFT(i.STATE,2)), @PostalCode = RTRIM(i.ZIP), @TelephoneN = RTRIM(LEFT(i.PHONE1,10)), @FaxTelephoneN = RTRIM(LEFT(i.FAX,10)), @SalespersonN = RTRIM(i.SLPRSNID), @TermsCode = RTRIM(i.PYMTRMID), @CustRateSched = RTRIM(i.DEX_ROW_ID), @SalesAreaCode = ISNULL((SELECT Dex_Row_ID FROM RM00303 WHERE RM00303.SALSTERR = i.SALSTERR),0), @InactivePurge = i.INACTIVE, @CreditStatus = i.HOLD, @CreditLimit = i.CRLMTAMT FROM inserted i
------- Get Logic server name and database name
SELECT @Server_Name = RTRIM(l.Server_Name), @Logic_DB_Name = RTRIM(l.Logic_DB_Name) FROM tbl_Logic_DB l
------- Insert new Customer record into Logic database
my asp.net application communicate with SQL database, but when I have single quote ( ' ) in my string then it throws error. and it does not insert that string in database. How can I solve this problem . or give me some suggestions on this issue. thank you maxmax
Hello Everybody / Anybody, Sorry but exiting problem!
The Problem: OPENQUERY throwing error [Error 7357]when the source SP uses temporary table. Description : Need to validate data against master list. My combo on UI has a source Stored Proc(contains a temp table in it). I'm importing data from Excel. Before import, I want to validate it against my master list values.
[say field Priority has master values "High, Medium,Low".] and in excel user has added 'ComplexHigh' under priority field] In this case, my import validator StoredProc should not accept value 'ComplexHigh' as it is not present in my Priority master list]
I'm preparing a temp table tabName containing o/p of SP, it works fine zakkas if my SP usp_SelectData does not contain temp table. I think you got what the situation is!! Woh!
Note : I have searched net for this and found nothing! So its challenge for all of us. TRY OUT!! ------------------------------------- The Code ----------------------------
create proc usp_SelectData as create table #xx (FixedCol int) insert into #xx select 1 union select 2 select * from #xx drop table #xx
create proc usp_SelectData2 as create table xx (FixedCol int) insert into xx select 1 union select 2 select * from xx drop table xx -- Please replace MyDB with your current Database SELECT * INTO tabName FROM OPENQUERY('EXEC MyDB.dbo.usp_SelectData')
-- Throws Error 7357 : [Could not process object 'EXEC MyDB.dbo.usp_SelectData'. The OLE DB provider 'SQLOLEDB' indicates that the object has no columns.] SELECT * INTO tabName FROM OPENQUERY('EXEC MyDB.dbo.usp_SelectData2') -- Works fine
I've set up a report server on IIS on my local machine using SSRS 2005. All is well in the world--it shows up, and I can publish reports and have them display successfully.
However, I'm trying to publish a couple of reports based on an Access database--and this is where the problem lies. The reports run perfectly in Visual Studio, which is on the same machine as the report server. Thus, I can deduce that the ODBC connection to the Access database is set up properly. There are no errors on the report, which means that the reports are set up correctly. I've spent the last day researching the problem, but nothing I've tried thus far (from putting the Access database in a shared folder to changing security on the file and report server to rebuilding the reports from scratch) works. The exact error is given below, with the data source name changed:
An error has occurred during report processing.
Cannot create a connection to data source 'MyODBCDataSource.
ERROR [HY024] [Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. ERROR [IM006] [Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed ERROR [HY024] [Microsoft][ODBC Microsoft Access Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Can anyone suggest something I missed? I'm stumped on this one.
Edit: Just to clarify, EVERYTHING is on my local machine--the web browser I'm viewing from, IIS, SSRS 2005, the Access database, the ODBC connection (in the System DSN), everything.
Hi everybody. I have a merge replication scenario between 2 servers. Everything is OK when I write data in UP server (the server which does the replication). But when I write data in any tables in the DOWN server throws an error saying that the table where I'm trying to insert data is updating or inicializating for merge replica. This table, where the error throws, isn't involved in the replica. In fact, that table is not involved in none replication. Can you help me? Thanks in advance
I have a SSRS report that parses RTF to TXT and displays it in a report.  The report works fine and everything displays correctly.  The subscription email, however, contains a report with errors: Request for the permission of type 'System.Security.Permissions.UIPermission, mscorlib, Version=2.0.0.0, Culture= neutral,PublicKeyToken=b77a5c561934e089' failed.The report contains embedded code as well as references to System.Security and System. Windows. Forms.  I've updated .....Reporting ServicesReportServer ssrvpolicy.config and ....Reporting ServicesReportManager smgrpolicy.config to change permissions to FullTrust.
I have created data model where I'm taking several sources of Point of Sale data (multiple retailers) and combing them using Power Pivot and a custom calendar. We get data retailer direct, which is mostly in weeks, and data from IRI which is in four week buckets. This does not allow me to use the date intelligence DAX functions. I'm brand new to DAX and my experience starts and ends with Excel. (Diagram view and link to file to come after account verification)Â .
The DAX code for calculating LY Sales is:
= CALCULATE (     [Sales $],     FILTER (         ALL ( dCalendar ),         dCalendar[IRIYearNumber]             = VALUES ( dCalendar[IRIYearNumber] ) - 1
[Code] ....
The filters are to prevent items not on the item table from showing on the report, and the customer filter is to prevent all the sales being rolled together as and extra line (with blank customer) on the report.Â
The error happens when I select two periods that are in different years. When I select the 13 periods on 2014 all is well. But when I add a period from 2015 it throws the error below;
ERROR - CALCULATION ABORTED: Calculation error in measure 'dProducts'[LY Sales $]: A table of multiple values was supplied where a single value was expected.Â
I have a multi value  parameter called "Location" and this depends on another multi valued  parameter value. The default value for the parameter "Location" comes from the another another multi valued  parameter. Now say when the default value is set for the parameter Location like the below:
The Location parameter data set has values from the Query and default values has been set as shown below:
I wanted to create a package to copy the objects from one database to another and replace those object if they already exist. Therefore, before the package executes you do not know whether all the objects exist on the target server or only some of them.
Using the 'Transfer SQL Server Objects Task' I have found that I cannot get this to execute cleanly by itself. If I set the 'DropObjectsFirst' to false then an error is thrown if the object exists and if I set it to true then an error is thrown if it does not exist.
In order to get round this I have had to create an 'Execute SQL Task' to list all the objects and then go through them dropping them on the target server in a for each loop before executing the 'Transfer SQL Server Objects Task' with 'Transfer SQL Server Objects Task' set to false.
However, is there a better way of achieving this or am I missing something in the 'Transfer SQL Server Objects Task'?
I have a package that has a data lfow task. this task imports data from a db2 database (using the IBM Ole DB provider fro db2) and adds it to sql server database table. This package was created on the server. then though version control (using TFS source control) I check out the package on my local machine. and when I open the package I get the foll 3 errors.
Error 1 Validation error. Import Account Num from BMGP_BDR: DTS.Pipeline: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error 2 Error loading BMAG Download Xref Tables - bmag.dtsx: Microsoft.SqlServer.Dts.Pipeline.ComponentVersionMismatchException: The version of component "DataReader Source" (1113) is not compatible with this version of the DataFlow. [[The version or pipeline version or both for the specified component is higher than the current version. This package was probably created on a new version of DTS or the component than is installed on the current PC.]] at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostCheckAndPerformUpgrade(IDTSManagedComponentWrapper90 wrapper, Int32 lPipelineVersion)
Error 3 Error loading BMAG Download Xref Tables - bmag.dtsx: The component metadata for "component "DataReader Source" (1113)" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I have a package which reads an Access file from a folder. My connection manager to this file is .NET providers for OledbMicrosoft Jet 4.0 OLE DB Provider.
Package works from my computer. But when I execute it on the server as a SQL Agent job, I get
The component metadata for "component "DataReader Source" (1) could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
I copied the mdb file to a folder on the server which my packages have no problem reading data from.
My packages run under the same domain account as defined in proxies.
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
hello Jamie actually i am trying to add something using OLE DB Command Component and i am getting this error
[Add Mail Status [8108]] Error: An OLE DB error has occurred. Error code: 0x80040E14. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E14 Description: "Error in stored procedure <myStoredProcedure>: @fNameStatus must be a GUID for relational fields".
in the stored procedure, the column name accepts a varchar(800) and i am passing a String (3). from the source, the column is nVarchar(255). For some reason, its working for email and all others please HELP --
My process checks values in certain files in a "Source" folder against a table in a database. If these values do not match, those files are moved to a "Fail" folder and if they are validated then they are moved to a "Success" folder. My issue is caused by the fact that these files (which are notepad text files) are not being moved over to the success folder for the following error:
"The process cannot access the file '\Server1c$Source239598.TXT' because it is being used by another process."
I have checked whether these files were actually being used by another process but even cutting off users from the directory and even copied a test file into the folder, the issue will still pop up and for random files.
I've tried using two different components to do the same thing as the "Move" component --- "Copy files from source to destination" and then a separate component "Delete file from Source folder" which is essentially a move. The issue persists on the Delete process because it sees that the file is still being used by some other "imaginary" process it seems to me.
I've tried upping the MaxErrorCount on the Delete and even using the Move components to try to ignore this issue but the package still fails. Are there any other ways to get around this problem?
[Data Conversion [14]] Error: Data conversion failed while converting column "Column1" (99) to column "Column1_Converted" (204). The conversion returned status value 2 and status text "The value could not be converted because of a potential loss of data.".
[Data Conversion [14]] Error: The "output column "Column1_Converted" (204)" failed because error code 0xC020907F occurred, and the error row disposition on "output column "Column1_Converted" (204)" specifies failure on error. An error occurred on the specified object of the specified component.
Can anyone tell me which Data Type should I use to convert string into integer.
Error: 0xC020901E at Load_tblDelayfact, Lookup_DL_CODE [184]: Row yielded no match during lookup.
Error: 0xC0209029 at Load_tblDelayfact, Lookup_DL_CODE [184]: The "component "Lookup_DL_CODE" (184)" failed because error code 0xC020901E occurred, and the error row disposition on "output "Lookup Output" (186)" specifies failure on error. An error occurred on the specified object of the specified component.
Although the Lookup table is filled in with the following SELECT ststement:
SELECT DISTINCT DL_CODE, DL_COMMENT FROM DL_Temp AS T1
WHERE NOT EXISTS(
SELECT * FROM DL_CODE AS T2 WHERE T1.DL_CODE = T2.DL_CODE AND T1.DL_COMMENT = T2.DL_SENT_COMMENT
)
So there is no way that there is a record in DL_Temp (The data source) that does not exist in DL_CODE( the lookup table). Indded, I did serveral queries and tests to check that no such data exist and I found that no such record exists.
Please help me and tell me what can be the reason for this error. I used the same package on the same data yesterday and every thing went fine. Is that a bug that any of you faced before.
