Seeking Advice: SQL Server On Win 2008 Virtual Server Or Just Win 2008?
Apr 23, 2008
Hello - does anyone have experience w/SQL Server 2005 in a virtual environment? I'm considering this for a production environment but not sure if performance will suffer. Our databases will have a lot of writing but not too much reading. A SSRS solution is currently the only app. connecting to the SQL db. Max users to server at any given time will be very low (~10 users max). But the databases are pulling in data from other, outside multiple data sources on a daily basis.
Any pointers to documentation or any advice?
Thanks,
A Brown
View 1 Replies
ADVERTISEMENT
Mar 14, 2011
I have been tasked with moving our SQL server estate onto new 64bit SQL 2008 Virtual servers on a VM base. Each Virtual server will be attached to our SAN that i will have no control over. Do i ask for multiple LUNs pretending that there is a COS), Etemp), FData) and Glog) disk structure or do I just present a very big space as a single C: drive and let it go.We are consolidating lots of old physical servers onto fewer (more powerful) virtual servers (according to the VM and SAN administrators)
1. Configure your SAN properly
2. Don't overallocate shared resource
View 6 Replies
View Related
Oct 14, 2015
Any good starting point to understand for a specific db, how many max VLFs are good to have so that it does not cause long startup or backup times?
Also, I need some calculation so that I can identify a best growth parameter I will setup for each database ?
I'm seeing the below msg in errorlog and curious to know the changes (right sizing/growth) to be done? As of now 100 MB of log file growth value is set (refer: [URL] ....)
Database BizTalkMsgBoxDb has more than 1000 virtual log files which is excessive. Too many virtual log files can cause long startup and backup times. Consider shrinking the log and using a different growth increment to reduce the number of virtual log files.
View 3 Replies
View Related
Mar 31, 2008
There are a few features in the new SQL Server - Reporting Services that I really need in production. I have tested everything and it works great. I am running the CTP version since Microsoft is saying they aren't releasing the release version until 3rd quarter 2008.
Since Microsoft won't sell SQL 2008 until 3rd quarter, can I run the CTP in production until the release and then purchase SQL 2008?
Jim
View 1 Replies
View Related
Feb 25, 2008
Hello!
Recently, I set up server with Windows Web Server 2008 RC1, SQL 2008 Express beta, .NET 3.5, IIS 7.
I'm running ASP.NET web application with SQL database. Everything works fine until the first application state on the server expires. After that, any postback that starts a new application state on the server and connects to the database, results in the following error:
Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed.
Is this a bug that will be fixed in release of Windows / SQL or am I doing something wrong?
Many thanks for help,
Jan
View 1 Replies
View Related
Mar 7, 2008
Hi all,
New to this so please be patient and please help.
I have developed an SQL 2005 Express command line option install for our company which has been working seamlessly for the last 18 months.
http://msdn2.microsoft.com/en-us/library/ms144259.aspx
I downloaded the €śMicrosoft SQL Server 2008 Express CTP, February 2008€? from http://www.microsoft.com/downloads/details.aspx?FamilyId=749BD760-F404-4D45-9AC0-D7F1B3ED1053&displaylang=en
I simply replaced the 2005 file €śSQLEXPR.EXE€? with the 2008 file €ś€?, recompiled the installation and tested only for it to fail. I than read the 2008 books online and noted the change in command line options.
http://www.microsoft.com/downloads/details.aspx?familyid=19DB0B42-A5B2-456F-9C5C-F295CDD58D7A&displaylang=en
http://msdn2.microsoft.com/en-us/library/ms144259(SQL.100).aspx
I then changed the command line to suit the Microsoft 2008 books online, recompiled the installation and tested only for it to fail once more.
Interestingly I tested the install from the default GUI and at the point of adding the €śsa€? login credentials it fails to allow the installation to proceed. Strangely by selecting the windows authentication credentials, €śnext€? than €śback€? it now allows me to add the €śsa€? login credentials and continues to install correctly as required.
I hope I have explained this clearly enough.
1. Is this a bug in the €śMicrosoft SQL Server 2008 CTP, February 2008€? installation?
2. If so is this causing the command line install options to fail?
3. How do I obtain a version of €śMicrosoft SQL Server 2008 Express€? that will work installing from the command line?
Thanks in advance.
View 1 Replies
View Related
Aug 10, 2007
Hello,
I am asking a question i have seen many threads on, but I am looking for an idiot's guide on how to convert my SQL 2005 database to SQL 2000 so i can get it to run on my web hosting server. I'm very new to asp.net , but have ahd years of experience in normal HTML and a year or two in the old ASP.
I was advised to learn ASP.Net 2.0 and have found it nothing but brilliant. The intergration with SQL 2005 made it a lot quicker to link up a database than using Access. Unfortunatly my hosting company is a little behind and still using SQL 2000. There isn't mch databse intergration (a few aplication forms) so I dont mind re-writing the whole database but I dont know how to set Visual web developer up with a SQL 2000 Database. I have also read from various other forums that you can convert a databse to 2000 by doing something with the scripts, but the explaination is too complicated for me to follow.
Is there anyone out there who wouldn't mind going over some old ground and explain this all in simple terms? Im using 'SQL Server Managment Studio Express' (although i dont know how to use it) and 'Microsoft visual web developer 2005 express edition' .
Thanks for reading this
Simon
View 6 Replies
View Related
Nov 30, 2007
Hello everyone, I am upgrading from SQL Server 2000 to SQL Server 2005. Any caveats? Can I just detach the db's and attach them into 2005. Or is there any conversion I should run or import first?
Thanks,
View 4 Replies
View Related
Aug 20, 2007
Hi. We've decided to convert our Crystal Reports to SSRS 2005. We know (thanks to this forum) there are companies that will convert the reports at a cost; however, we'd like to undertake this ourselves. Are there resources you can point us to that might be specific for Crystal Reports users coming over to SSRS, especially for newbies? Thank you.
View 3 Replies
View Related
Jan 4, 2013
if you can restore a database to Server B using Server A as the service. Meaning we would issue the command on Server A but somehow point to Server B as where we want the restore to happen.
The backup file would be in a location independent of both servers.
View 4 Replies
View Related
Apr 15, 2008
Hi all,
Please tell me about difference between SQL Server 2005 and SQL Server 2008 SSRS(Sql Server report)
Why to upgrade for Sql Server 2008
Thanks,
Ashok
View 3 Replies
View Related
Dec 23, 2007
when I try to make a sqldatasource with visual studio 2008 and SQLServer 2008 . I found that there are a message that the visual studio 2008 can support only SQLServer 2005 and SQLServer 2000how to make my visual studio 2008 support SQLServer 2008
View 1 Replies
View Related
Jul 7, 2015
I have two calls to stored procedures that in an SSIS package fails silently. They are simply not executed in production but works fine in test, nothing happens and the sql server agent reports that everything has gone just fine.
In test they have 1 server with db A and B. No issue here.
In prod they have 2 servers with db A and B. On server 1 sql server agent executes a job that includes an SSIS package that on server 2 runs a couple of sp's. That user is db owner on server 2 db B and yet nothing happens. The sp's are not executed.
If I in prod run the job manually then it works, but not when run with the sql server agent account that as said is even db owner.
View 2 Replies
View Related
Aug 26, 2007
I have a question about a problem that I cannot seem to tackle. I have installed the following programs on Windows Vista:
- SQL Server 2005
- Visual Studio 2008
- SQL Server Compact Edition 3.5
- SQL Server Compact Edition 3.5 Server Tools
I want to do the following:
1. I want to create a SQL Server Compact Edition 3.5 database in the SQL Server Management Studio
2. I want my SQL Express server in SQL Server 2005 to be a distributor and publisher
About 1. In SQL Server Management Studio I cannot choose SQL Server Compact Edition 3.5 .
ABout 2. I tried to setup my server to be a distrubutor by running a stored procedure with the following name: sp_adddistributor. I get the following error: This edition of SQL Server cannot act as a Publisher or Distributor for replication.
Does anyone have a solution to both problems.
View 1 Replies
View Related
Jun 20, 2008
1) I can't get the 'copy database' function to work from SQL Server 2008 to SQL Server 2005. I connect ok. Everything goes to the last step and then it fails.2) I cant get a SQL server 2008 backup to restore on SQL SEerver 2005 either.
The only way I know that works is to script the creation of all tables then export and import. This does work.
How can I get the 'entire' database, structure and data, from 2008 to 2005?
ThanksSQL newbie.
View 2 Replies
View Related
Feb 4, 2015
I need to load the latest csv files from file server , The files are placed in a folder called -
Posted 02022015- --> csv files .
I am able to copy the csv files from filserver using bulk insert (manually) , giving the file location
I am having difficulty picking up the latest folder which is posted on the server and import it into database using a stored proc .
View 2 Replies
View Related
Feb 18, 2015
Production and development servers are on different domains and they do not trust each other. How do I import data from the table t1 from a database db1 in production and load it into table t1 inside database db1 in development?
View 3 Replies
View Related
Feb 23, 2015
I have the linked server connection created and works perfectly well. I mean I am able to see the tables while I am on my database.
how do I write a SQL statement to reference the linked server ?
I tried the following:
Select top 100 * from casmpogdbspr1.MPOG_Collations.dbo.AsaClass_Cleaned
Then I get the error message....
Msg 7314, Level 16, State 1, Line 1
The OLE DB provider "SQLNCLI10" for linked server "casmpogdbspr1" does not contain the table ""MPOG_Collations"."dbo"."AsaClass_Cleaned"". The table either does not exist or the current user does not have permissions on that table.
View 2 Replies
View Related
Apr 16, 2015
Using a 32-Bit SQL Server 2008 Express on my LOCAL PC. I downloaded the Advantage 8.1 OLE DB Provider and created a linked server to a REMOTE Advantage 8.1 database server. There is no data dictionary on the Advantage server.
Here is my linked server:
EXEC master.dbo.sp_addlinkedserver @server = N'1xx.1xx.xx.1xx', @srvproduct=N'Advantage', @provider=N'Advantage OLE DB Provider', @datasrc=N'1xx.1xx.xx.1xxeccET', @provstr=N'servertype=ads_local_server;tabletype=ads_cdx;'--tabletype=’ADS_ADT’ (this test works too)
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'1xx.1xx.xx.1xx',@useself=N'False',@locallogin=Null,@rmtuser='adssys',@rmtpassword=Null
Testing the link succeeds with above. Using “ads_REMOTE_server” instead of “ads_local_server” and the test fails. Here is my problem, using the following queries will not work. Perhaps it’s a permissions issue? When I specify my local credentials for the remote server in the linked server it still does not work.
SELECT * FROM OPENQUERY([1xx.1xx.xx.1xx], 'SELECT * FROM ActType')
OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx" returned message "Error 7200: AQE Error: State = HY000; NativeError = 5004; [Extended Systems][Advantage SQL][ASA] Error 5004: Either ACE could not find the specified file, or you do not have sufficient rights to access the file. Table name: ActType SELECT * FROM ActType".
Msg 7321, Level 16, State 2, Line 2
An error occurred while preparing the query "SELECT * FROM ActType" for execution against OLE DB provider "Advantage OLE DB Provider" for linked server "1xx.1xx.xx.1xx".
View 0 Replies
View Related
Sep 4, 2015
A recent SharePoint upgrade has rendered several views obsolete. I am redefining them so that our upper level executive reports show valid data.(yes, I know that doing anything to sharepoint could cause MS to deny support, having said that, this is something I've inherited and need to fix, pronto) The old view was created like so:
USE [AHMC]
GO
/****** Object: View [dbo].[vwSurgicalVolumes] Script Date: 09/04/2015 09:28:03 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE VIEW [dbo].[vwSurgicalVolumes] AS
SELECT
[code]....
As I said, this view is used in a report showing surgical minutes.SharePoint is now on a new server, which is linked differently (distributed?) I've used OPENQUERY to get my 'new' query to work;
SELECT *
FROM OPENQUERY ([PORTALWEBDB], 'SELECT
--AllLists
AL.tp_ID AS ALtpID
,AL.tp_WebID as altpwebid
,AL.tp_Title AS ALTitle
[code]....
My data (ie surgical minutes, etc) seems to be in the XML column, AUD.tp_ColumnSet . So I need to parse it out and convert it to INT to maintain consistency with the previous view. How do I do this within the context of the view definition?Here is a representation of the new and old view data copied to excel :
<datetime1>2014-08-14T04:00:00</datetime1><float1>2.000000000000000e+000</float1><float2>4.190000000000000e+002</float2><float3>1.600000000000000e+001</float3><float4>8.110000000000000e+002</float4><sql_variant1 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes"
[Code] ....
can't format it to make it look decent. InHouseCases =2, InHouseMinutes=419, OutPatientCases =16, OutPatientMinutes=1230. This corresponds to the new data I can see in the XML column; 2.000000000000000e+000 is indeed 2 and 4.190000000000000e_002 is indeed 419.
View 4 Replies
View Related
Sep 18, 2015
we are having the same code base in both the environment but we have different version of SQL Server Version(Env 1 - SQL 2012, Env 2 - SQL 2008). We are getting the expected result in Env - 1 but not in the ENV -2. So we tried to get the SQL trace for the web request we found that Date format getting changed.
2012 - Date Format in the SQL Trace for the request '2015-09-10 00:00:00' which is working as expected.
2008 - Date Format in the SQL Trace for the request 'Sep 10 2015 12:00:00:000AM' which is Not working.
Complete SQL Trace for Request.
Evn - 1 - SQL Server 2012
exec dbo.usp_GetWorkQueue @ClientName='CLT',@HasFilter=1,@FacilityName='',@StartDate='2015-09-10 00:00:00',@EndDate='2015-09-18 00:00:00',@OrderDirection='D',@StartIndex=1,@PageSize=20
[code]...
View 3 Replies
View Related
Apr 3, 2008
Hi All,
After I installed sql server 2005 64bit standard edition on Windows Server Enterprise 2008 64bit, I cannot connect to the sql instance using the sql management studio on the same machine!
I verified that:
service is running,
in surface area configuration: remote connections to local and remote are enabled, for TCP/IP and named pipes.
ran the command netstat -avn| findstr 49279 to make sure that the server is listening.
firewall is off, but this does not matter since I'm connecting locally to local instance
I'm using domain controller account to login to sql server / also tried the sa account.
what else can be wrong?
thanks.
View 4 Replies
View Related
Mar 12, 2008
Does anyone know how to properly install SQL server 2005 express reporting services on windows server 2008. When ever i try to access the report manager I get an error "Cannot access the remote server" even though the report server is on the local machine. I only have the web server role installed on the server. Im still quite a newbie at managing servers so please keep it as simple as possible.
Thanks
Matthew
View 2 Replies
View Related
Feb 1, 2012
I am task with identifying the source database name, id, and server name for each staging table that I create. I need to add this to a derived column on all staging tables created from merging same tables on different servers together.
When doing a Merge Join, there is no way to identify the source of data so I would like to see if data came from one database more than the other servers or if their are duplicates across servers.
The thing that bugs me about SSIS Data Flow task is there is no way to do an easy Execute SQL Task after I select my ADO.NET Source to get this information because my connection string is dynamic and there is no way of know which data source is being picked up at runtime.
For Example I have Products table on Server 1 and 2:
Server 2 has more Products and would like to join the two together to create a staging table.
I want see the following:
Product ID, Product Name, Qty, Src_DB_ID, Src_DB_Name, Src_Server_Name
1 IPAD 1000 2, MyDB1, Server1
100 ASUS Pad 40 1, YourDB, Server2
get database name and server name in DATA FLOW only (without using a for each in Control Flow)
View 5 Replies
View Related
Feb 16, 2015
Is it possible to view the Connection String information of a remote login/session? I want to know if the login is looking-up the database server via IP address, servername (NetBIOS name) or fully-qualified domain name (FQDN).
Using these DMVs I can get a lot of relevant information:
sys.dm_exec_sessions
Program Name (eg. Microsoft SQL Server Management Studio),
Client Interface Name (eg. .Net SqlClient Data Provider)
sys.dm_exec_connections
Net Transport (eg. TCP),
Client Net Address and TCP Port
but not how the server's IP address was resolved. Is the connection string ever sent by the client to the server, or just used for DNS lookup?
View 0 Replies
View Related
Apr 21, 2008
Hi,
Is it possible to install SQL Server 2005 Eval on a Virtual PC 2007
client running Server 2008 Beta? Nothing says it isn't possible, it
says I need to service pack it right away, but before it gets started
it comes up with the error 'sqlcu.dll failed to load'. Anyone know
what this is all about?
Any ideas?
Any help would be appreciated.
Thanks!
View 1 Replies
View Related
Mar 28, 2008
I just upgraded my Sql Server to 2008 and I was hoping that the link found in this page would provide the download to SSMSE for Sql Server 2008, but it redirects me to 2005 version. I don't any instances running with Sql Server 2005 that I could access through SSMSE 2005, so I can't use it. Does anyone have the link for download to SSMSE 2008? Or should I downgrade? And if, how can I downgrade?
Thank you very much, sorry by my misspellings.
View 5 Replies
View Related
Aug 12, 2014
I restarted the sql server after c2 audit was enabled and now i can not start the instance getting this error below. how do i bring the sql server up?
Cannot start C2 audit trace. SQL Server is shutting down. Error = 0x80070003(The system cannot find the path specified.)
View 2 Replies
View Related
Feb 27, 2015
I am configuring log shipping. On the secondary server, I already restored the DB.From the primary server, I was following all the instructions on how to. Now this is the problem. I click on ADD button to connect to the secondary server. I put in the IPInstanceName and the DB. I also chose option 3 (No, the secondary database is initialized), clicked OK after all the option, now getting this error.
View 9 Replies
View Related
May 26, 2015
I have table which consists of images. I am trying to export those images to a folder.
declare @path varchar(100)= 'c:images'
SELECT [PICTURE]
,@path+[PICTURE] AS Path
FROM [A].[dbo].[PICTURE]
I am getting this error: The data types varchar and varbinary(max) are incompatible in the add operator.
View 1 Replies
View Related
Jul 3, 2015
I have an sql server table which serves as a criteria table for my sql server query.
i wish to update the sql server table from the excel worksheet. The intention is to allow the end user to change the values in a specific column in the sql server table via excel.
The table in question has the following fields
SELECT
[Cluster]
,[Max_Break_btw]
,[RefD_Max_Break]
,[DischD_Max_Break]
,[MaxReviewPeriods]
FROM [databseName].[dbo].[SpellClusterAssum]
I will like to change / update the values in the "[Max_Break_btw]" column.
View 0 Replies
View Related
Sep 15, 2015
UAT environment : SQL Server 2008 R2 SP3 Enterprise Edition
SANDBOX environment : SQL Server 2008 R2 SP3 Standard Edition
I have a database backup (.bak) that was taken from UAT environment that has CDC enabled on some tables. I want to restore that database into my SANDBOX environment which does not support CDC (because of standard edition). The restore process fails due to this incompatibility. Is there any way to restore without CDC (I dont CDC enabled on my SANDBOX; just my data from the backup) ?
View 0 Replies
View Related
May 6, 2008
Dear All,
I would like to ask you all a few questions. Please kindly inform me the related links if this topic is already brought before.
Is SQL Server 2005 Standard Edition compatible with Windows Server 2008? Can it run well there?
If not, what do I need in order to install it on my server?
Thank you so much for your kind attention and look forward to hearing from you all soon.
Warm regards,
Newbie_Newbie
View 6 Replies
View Related
