Select 4 Most Recent Results
Mar 29, 2013
I am creating a database in SQL2K for collating test results taken at regular intervals across several different sites and frequencies. The table will look something like this:
SiteDate Data
A01/01/2013 ...
B02/01/2013 ...
C03/01/2013 ...
A04/01/2013 ...
B05/01/2013 ...
C06/01/2013 ...
And so on...
In total there will be about 300 sites, with up to 12 records per site every year. I want to be able to create a view showing the 4 most recent results for each site. Is there a simple way of doing this? Obviously getting the most recent result for each site is quite straight forward, but I can't work out how to get the last four. Unfortunately this is on a 2k box, although I could (at a push) use a 2k8 box if needed.
View 3 Replies
ADVERTISEMENT
Dec 21, 2006
Every hour we capture some values from our factory (position of pumps, valves, ...) in our sql server 2000 db.
Normally 1 record is added to the db.
00:00:00
01:00:00
02:00:00
...
21:00:00
22:00:00
23:00:00
All of these values are displayed in an Excel sheet. One sheet contains all the data from one month.
I noticed a problem last week when 2 records were added: first one at 19:00:00 and the second one at 19:00:01
We only want to keep the most recent record (19:00:01) in a situation like this but I can't seem to work out an SQL-statement :o
This is what we have know. It used to work fine untill we had 2 record being added instead of one.
SELECT TimeOfCapture, Value1, Value2, Value3
FROM FactoryTable
WHERE (MONTH(TimeOfCapture) = MONTH(GETDATE())) AND (YEAR(TimeOfCapture) = YEAR(GETDATE()))
View 1 Replies
View Related
Mar 8, 2012
I need this query to pull just the last scan date, i.e. if a scan ran on 3/7/2012 I need just the records (there may be few or many) that pertain to that date and no other dates. When I run this query I am still getting all of the results (i.e. scan dates of 3/7/2012, 3/5/2012, 3/1/2012, etc)
I just need the most recent date, even if there are many records for that date (i.e. 10 IP addresses that were all scanned on 3/5/2012)
Code:
SELECT CPA.ScanName,
CPA.pspplMSSeverity,
CPA.smachIPAddress,
[Code]....
View 3 Replies
View Related
Apr 27, 2004
Hi,
I want to construct a query that would give the most recent record. Table data looks like -
F1F2F3 F4
20016395074/7/2004 15:40:55
23516395074/6/2004 9:31:54
All columns are strings as the data is obtained from text file. Column F3 can have same or different dates. In the above data select 1st record as it is the most recent.
If data is like -
F1F2F3 F4
20016395074/7/2004 15:40:55
23516395074/7/2004 19:31:54
Select the 2nd record.
How do I construct the SQL query?
Let me know.
View 1 Replies
View Related
Jan 9, 2007
I have 2 tables:
1) Item table (No_, Description)
2) Sales Price HAG table (Item No_, Sales Price HAG, Starting Date)
I want to have a report within from every item the most recent sales price. But, it is possible that a unique item has more than 1 sales price in the 'Sales Price table' (if it has more than one Starting Date). I want to report the sales price with the most recent date.
I've made this statement:
SELECT [DatabaseName$Item].No_, [DatabaseName$Item].Description,
[DatabaseName$Sales Price HAG].[Unit Price]
FROM [DatabaseName$Item] INNER JOIN
[DatabaseName$Sales Price HAG] ON
[DatabaseName$Item].No_ = [DatabaseName$Sales Price HAG].[Item No_]
WHERE ([DatabaseName$Sales Price HAG].[Starting Date] IN
(SELECT MAX([Starting Date]) AS EXPR1
FROM [DatabaseName$Sales Price HAG] AS [DatabaseName$Sales Price HAG_1]
GROUP BY [Item No_]))
After running I still get from some items more than 1 price...... What went wrong?
Thx for help!
View 10 Replies
View Related
Jun 19, 2008
Hi,
I have to create the query in which I have to select complete row records according to the column "time" where the time is most recent entered.
there are columns "username", "bookname", "Time"
a asp 6/4/2008 6:02:00 AM
b sql 6/4/2008 6:04:00 AM
a php 6/4/2008 6:05:00 AM
Navi
View 5 Replies
View Related
Feb 1, 2015
I have the following query that should return the most recent FormNote entry for a work order where the note begins with "KPI". However if someone decides to a more recent note, it selects that one, even if it doesn't begin with "KPI".
I would like it to return the most recent record that ALSO begins with "KPI". How can I correct this?
Select wh.worknumber, wh.date_created, wh.itemcode, wn.TextEntry as [Notes] from worksorderhdr wh left join
(select ID, WorksOrder,[CreationDate], TextEntry
from
(
select ROW_NUMBER()over(partition by worksorder order by [CreationDate] desc) OID,*
from FormNotes
)orders where orders.OID=1 ) wn on wn.WorksOrder = wh.worknumber where TextEntry like 'KPI%'
Sample results below, see line 5 - this record should not have been selected as there is a record beginning with "KPI" for that work order, but it is dated before this one.
worknumber date_created itemcode Notes
-------------------- ----------------------- -------------------- -----------------------------------------------------------------------------------
HU-DN-004385 2014-07-21 16:15:00 4261 KPI Hyd oil leak repaired
HU-DN-004707 2014-08-06 11:39:00 8005 KPI Valve replaced on day 2.
HU-DN-004889 2014-08-19 15:44:00 9275A KPI Repaired in 2 days - m/c working
HU-DN-004923 2014-08-22 14:23:00 4261 KPI New tracks fitted
HU-DN-005162 2014-09-12 15:04:00 9360A Mechlock key delivered to site - m/c working
HU-DN-005170 2014-09-15 12:07:00 2130A KPI 28.10.14 Metlock fitted
View 5 Replies
View Related
Aug 27, 2005
I am trying to pickup the most recent record by Product and Supplier.
eg.
Rec Prod Supp Date
1 1000 WES01 Jan 1/2005
2 1000 WES01 Apr 8/2005
3 1001 WES01 Apr 8/2005
4 1001 NAN04 Feb 15/2005
The Result I want is as follows:
Rec Prod Supp Date
2 1000 WES01 Apr 8/2005
3 1001 WES01 Apr 8/2005
4 1001 NAN04 Feb 15/2005
I have tried various methods with the TOP 1 and DISTINCT statements, but have not been able to get the results I am looking for. Help would be appreciated.
View 4 Replies
View Related
Nov 6, 2007
If I have a table structure similar to the following, how might I query it to obtain the Transaction ID, Transaction Date, and Customer Name for the most recent transaction per customer only:
TransactionTable:
TransactionID TransactionDate TransactionType CustomerName
1 10/1/07 1 Bob
2 8/30/07 2 Janet
3 9/17/07 1 Mike
4 9/25/07 1 Bob
The following query will return all records in the table other than Janets...not what I want:
SELECT Transaction ID, TransactionDate, CustomerName
FROM TransactionTable
WHERE TransactionType = 1
ORDER BY TransactionDate DESC
The following query will return all records in the table other than Janets again, because DISTINCT will use the combo of TransactionID, TransactionDate, and Customer name for uniqueness...not what I want:
SELECT DISTINCT Transaction ID, TransactionDate, CustomerName
FROM TransactionTable
WHERE TransactionType = 1
ORDER BY TransactionDate DESC
The results set I'm looking for would be the following, where only the most recent entry per customer with TransactionType 1 is returned (i.e. one record for Bob):
TransactionTable:
TransactionID TransactionDate CustomerName
1 10/1/07 Bob
3 9/17/07 Mike
I believe I need an appropriate subquery to yield the results I desire, but can't sort out what it is? I do not want to execute multiple queries but subqueries are fine. Unfortunately there's probably an easy answer that my brain is not currently generating. Any help would be appreciated.
Note, this is not a real table, but a sample to illustrate the concept for the query I need.
Thanks.
View 6 Replies
View Related
Jun 16, 2014
I am working on a query that needs to return the record order number with the most recent requested delivery date.
It seems to work most of the time, but I have found some glitches for some of the items.
example is my item 10702, it is showing 2 records (both valid ones)
Record 1 is order # 10450-0, requested delivery date 03/21/2014
Record 2 is order # 10510-0, requested delivery date 04/29/2014
I need to only get the records with the most recent delivery date, in this example that would be 04/29/2014
This query is what I have so far:
SELECT
s.PriorQuoteNumber
,s.PriorItemNumber
,s.PriorQuoteDate
FROM
(
SELECT
s.SalesQuoteNumberAS 'PriorQuoteNumber'
[code]....
WHERE s.rn = 1What am I missing in my query> how can I change it so it only returns the most recent date?
View 9 Replies
View Related
Apr 1, 2007
hi, like, if i need to do delete some items with the id = 10000 then also need to update on the remaining items on the with the same idthen i will need to go through all the records to fetch the items with the same id right? so, is there something that i can use to hold those records so that i can do the delete and update just on those records and don't need to query twice? or is there a way to do that in one go ?thanks in advance!
View 1 Replies
View Related
Jul 15, 2014
I need to get all customer records with the most recent tDate. A customer should never have duplicate tDate records, as only one record per day is allowed per customer, yet there somehow there are duplicates. Given this, I need to get the record with the Max date and Max ID. the ID column is an auto-incrementing Identity column.Below is the code without the Max ID column logic
SELECT tCustID, MAX(tDate) AS tDate--get MAX tDate records
FROM table1
GROUP BY tCustID
View 2 Replies
View Related
Jan 11, 2008
Hi all,
I copied and executed the following sql code in my SQL Server Management Studio Express (SSMSE):
--SELECTeg8.sql from SELECT-Using correlated subqueries of MSDN2 SELECT Examples--
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product p
WHERE EXISTS
(SELECT *
FROM Production.ProductModel pm
WHERE p.ProductModelID = pm.ProductModelID
AND pm.Name = 'Long-sleeve logo jersey') ;
GO
-- OR
USE AdventureWorks ;
GO
SELECT DISTINCT Name
FROM Production.Product
WHERE ProductModelID IN
(SELECT ProductModelID
FROM Production.ProductModel
WHERE Name = 'Long-sleeve logo jersey') ;
GO
=========================================
I got:
Results Messages
Name o row affected
========================================
I think I did not get a complete output from this job. Please help and advise whether I should search somewhere in the SSMSE for the complete results or I should correct some code statements in my SELECTeg8.sql for obtaining the complete results.
Thanks in advance,
Scott Chang
View 5 Replies
View Related
Dec 22, 2002
Hi,
im getting from my first select a list of pairs of codes (let say the codes r of products.)
so i have something like:
FirstCode SecondCode
1 1
2 5
4 2
... ...
now i want to get the name of each product so it whould be like:
FirstCode,FirstName,SecondCode,SeconeNam
the names stored in other table.
how can i do it?
thanks
Dovalle
View 1 Replies
View Related
Apr 15, 2015
Have a table that list item#, date the standard cost went into effect and the standard cost. How do I find the difference in StdCost on the last EffectiveDate and second to last EffectiveDate. 5.59 (01/05/2015) minus 5.81 (09/29/.014) = -.22.
Item# EffectiveDate StdCost
1152 01/01/2009 5.50
1152 09/29/2014 5.81
1152 04/04/2011 5.56
[code]....
View 2 Replies
View Related
Oct 13, 2015
I've got a select as follows:
select computer, count(*) as MissedCount from WInUpdates_Neededreq
WHERE LoggedDate BETWEEN DATEADD (DAY, - 5, GETDATE()) AND GETDATE() and LastReportTime !< DATEADD (DAY, -5, GETDATE())
group by computer
I need to make a join onto another table but don't want to lose the coutn(*) as MissedCount.
How can I join to another table and still keep the count form the original table. I want ot join to tblogons.workstationname and return computer from the original query...
View 16 Replies
View Related
Nov 16, 2007
I have one query which uses a join query to gather all the projects that should show up in someone's list over a period of time (returns and id (int) and name (varchar) paired dataset). I want to do a separate query that takes that list and selects all projects (same paired set ... id and name) EXCEPT where it matches an id on a row of the given result set. The one query looks like this ..DECLARE @startDate datetimeDECLARE @endDate datetimeDECLARE @userId UNIQUEIDENTIFIERSELECT @startDate = ppStartDate FROM ppTablewhere payPeriodID = @payPeriodIDSELECT @endDate = ppEndDate FROM ppTable WHERE payPeriodID = @payPeriodIDSELECT @userId = userID FROM usersTable WHERE userName = @userNameSELECT DISTINCT p.projectID, p.projectNameFROM projectsTable pLEFT JOIN projectMemberhsip m ON m.ProjectId = p.ProjectIdLEFT JOIN timeEntryTable t ON t.ProjectID = p.ProjectIdWHERE t.TimeEntryUserId = @userID AND t.TimeEntryDate >= @startDate AND t.TimeEntryDate <= @endDateORm.UserId = @userID I want to get the same selection from projectsTable WHERE it's not anything from this result set.Haven't been able to get it by modifying the WHERE logic. Is there a way to select all WHERE id != (resultSet from this SELECT)? TIA!
View 5 Replies
View Related
Aug 23, 2006
I am trying to round this data, but can't find a good resource on this. If my results are 15.6 I need it to round down to 15.5 and if my results are 15.4 I need it to round down to 15.0.ROUND(DATEDIFF(mm, employee.emp_begin_accrual, GETDATE())
* employee.emp_accrual_rate - SUM(ISNULL(request_1.request_duration, '0')), .5) Any help would be greatly appreciated. A link to a good reference on rounding would help too.Thanks in advance!!!
View 8 Replies
View Related
Oct 17, 2012
I need to insert in TableB the results of a select over TableA so i used:
Insert into TableB (col1, col2, col3) select c1, c2, c3 from TableA
and works OK.
But now i need to use a Stored Procedure "Insert_in_TableB" that handles all the process of checking values, inserting data, logging steps, etc etc. That receives via its parameters the values for validate, etc and then insert them in TableB.
So, how can i execute that procedure (and define its parameters) in a easy way? Something like
Exec Insert_in_TableB (select c1, c2, c3 from TableA)
or
Select c1, c2,c3 into Insert_in_TableB...
Don't want to use cursors.
View 1 Replies
View Related
Jul 23, 2005
I want to create a stored procedure that returns a list of records froma table. But depending on a userID value given only certain recordswill be returned that they have access to.I think this might be hard to do in a single SELECT statement becausethe user might also belong to a group that might have permission, etc.Can you do something like this pseudo code in a T-SQL procedure?DECLARE cur CURSOR FOR SELECT * FROM myTableOPEN curFETCH NEXT FROM curWHILE @@FETCH_STATUS = 0BEGINif( accessGranted(curRecord.id) ){ addRecordToResultSet() }else { ommitRecordFromResultSet() }END
View 11 Replies
View Related
Apr 25, 2008
Hello there,
I have two tables I selecting name using like with %string% from the two tables but I need to order the result comes from the two table:
1- the exact match for the search string come first from the two table.
2- and the partial match comes last after the exact match.
this is my DDL for the two tables :
USE [Northwind]
GO
/****** Object: Table [dbo].[Person] Script Date: 04/25/2008 14:33:24 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Person](
[PersonID] [int] NULL,
[Type] [char](10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Name] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[email] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
second table:
USE [Northwind]
GO
/****** Object: Table [dbo].[Members] Script Date: 04/25/2008 14:33:52 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Members](
[MemberID] [int] NULL,
[Type] [char](10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Name] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
[Email] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
and this my search query I have it in a stored Proc.
select *
from
(
SELECT PersonID, Type, Name, email
FROM Person
WHERE (Name LIKE '%'@Name'%')
union all
SELECT PersonID, Type, Name, email
From Members
WHERE (Name Like '%'@Name'%' )
) Y
Order by
Case[Name] when @Name Then 1 Else 2 End,
Case[Name] when 'm' Then 1 Else 2 End
Thank you for your time
Sms
View 5 Replies
View Related
Jan 18, 2006
Hey everyone,
I have an SSIS conversion issue. I'm pulling two tables from a DB2 database into SQL 2005. One table has a list of work orders, and the other has a list of work order comments. There is a unique identifier between the two tables so that a join can be used, however, due to size limitations, I need to be able to combine both tables.
The end result will be replicated out for SQL Mobile Edition and the file is too large when both tables exist so I am wanting to concatinate all the comments for each work order into a single text field in the work orders table.
Here is what I am wanting to accomplish:
UPDATE tblWorkOrdersSET Comments = (SELECT Comments
FROM tblComments
WHERE tblWorkOrders.ReqNum =
tblComments.ReqNum)
I know that this statement will not work because there is a one-to-many relationship between the tables so each work order could get multiple results.
I would appreciate any suggestions.
Thanks,
Lee.
View 2 Replies
View Related
Feb 8, 2008
Not sure if this is possible, but maybe. I have a table that contains a bunch of logs.
I'm doing something like SELECT * FROM LOGS. The primary key in this table is LogID.
I have another table that contains error messages. Each LogID could have multiple error messages associated with it. To get the error messages.
When I perform my first select query listed above, I would like one of the columns to be populated with ALL the error messages for that particular LogID (SELECT * FROM ERRORS WHERE LogID = MyLogID).
Any thoughts as to how I could accomplish such a daring feat?
View 9 Replies
View Related
Aug 28, 2006
I have the following select statement on my page: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:prbc_hrConnectionString %>"
SelectCommand="SELECT emp_lname + ', ' + emp_fname + ' ' + emp_minitial + '.' AS emp_fullname FROM employee WHERE (emp_username = @emp_username)">
<SelectParameters>
<asp:SessionParameter Name="emp_username" SessionField="Username" Type="String" />
</SelectParameters>I want to say "Welcome, emp_fullname" at the top of the page, but can't figure out how to write the results to the page. I am moving to ASP.NET 2.0 from PHP and am banging my head against the wall trying to figure out how to do these little things. I appreciate any help you can give.
View 1 Replies
View Related
Nov 7, 2007
my question is what all can i bind my results of a select query to.i know we can use Dataset and Sqldatareader. can we use something else like hashtables. for example we can have:reader = cmd.ExecuteReader(); can we have something likeHashtable = cmd.ExecuteReader();
View 5 Replies
View Related
Dec 2, 2003
Hello!
I've got the following procedure:
ALTER PROCEDURE [GetTimeDiff2] (@ID int) AS
select
A_ProspectPipeline.ID,
(case when [Completion Date] is null
then '13'
else
case when YEAR([Completion Date])>year(GETDATE())
then '13'
else
case when YEAR([Completion Date])<year(GETDATE())
then '1'
else month([Completion Date])
end
end
end)-
(case when YEAR([Start Date])=year(GETDATE())
then month([Start Date])
else
case when YEAR([Start Date])<year(GETDATE())
then '1'
else '13'
end
end)as [CY],
(case when [Completion Date] is null
then '13'
else
case when YEAR([Completion Date])>year(GETDATE())+1
then '13'
else
case when YEAR([Completion Date])<year(GETDATE())+1
then '1'
else month([Completion Date])
end
end
end)-
(case when YEAR([Start Date])=year(GETDATE())+1
then month([Start Date])
else
case when YEAR([Start Date])<year(GETDATE())+1
then '1'
else '13'
end
end)as [NY]
from a_ProspectPipeline where A_ProspectPipeline.ID = @ID
What i need to do is insert the two returned values [NY] + [CY] into two different tables.
Can anyone help me with this?
View 2 Replies
View Related
Jun 17, 2004
Hi,
I need to keep track of the number of hits on a particular page. Im using a stored Procedure
What I want to do is get the number of hits and increment it by one :)
ie: Sub Procedure should be like below
SELECT noOfHits WHERE pageName = 'bla bla'
noOfHits = noOfHits + 1 etc.
Also, some of the pages will be added and deleted all the time, so before I increment the noOfHits variable I need to check that the pageName 'bla bla' exists. AND if it doesnt I need to create a pageName called 'bla bla'
What I need to do in essence is:
1. Check that a particular row exists. if it doesnt create it.
2. Increment a value (by one) to a column in this particular row.
Phew. Hope you got that. Any ideas much appreciated,
Thanks,
Pete
View 4 Replies
View Related
Jan 18, 2003
Two tables: CompanyPrices(CompanyID, ProductID, Price), CompanyRegion(CompanyID, Region)
ProductID is the primary key.
I want to get 10 smallest prices in each Region. In other words, I am looking for 10 cheapest prices in each region. So, if there are 20 regions, I should get excatly 200 rows having prices for products from 200 companies if there were at least 10 companies in each region.
I tried the follwoing, but get incorrect results.
select S1.Region, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.Region = S2.Region
group by S1.Region, S1.Price having count(*)<=10 order by S1.Region, S1.Price
However, if I want to get 10 cheapest products for each company, the above sql works by modifying the join condition. Instead of S1.Region = S2.Region , I use S1.CompanyID = S2.CompanyID and I get correct results for 10 cheapest products for each company.
select S1.CompanyID, S1.Price from (select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S1 inner join
(select CompanyPrices.*, Region from CompanyPrices inner join CompanyRegion on CompanyPrices.CompanyID=CompanyRegion.CompanyID) S2 on S1.CompanyID = S2.CompanyID
group by S1.CompanyID, S1.Price having count(*)<=10 order by S1.CompanyID, S1.Price
I am not sure what is wrong in the first query and why it does not work when the second one works. Could someone help in making the first query work to give me correct results?
View 2 Replies
View Related
Aug 30, 2004
I am new to stored procedures and T-SQL so please stick with me. I have a table that holds information about companies. I am trying to write a stored procedure that when run will query that table and find out if there are more than one entry of that company. All company names in that table must be unique (they can only occur once), if they occur more than once I need to flag it for reporting.
So what is the best way to go about this? Essentially what i was thinking was doing a select * on the table and then going from the first entry to the last and at each entry running a select * from table where companyname = @nameofcompany. @nameofcompany would be the name for that entry. If the select statement revealed more than one entry then i would know there was a problem.
Like I said I am new and this is probably very simple but i need a little help getting started
thanks
View 6 Replies
View Related
May 28, 2013
way to insert a summary row where there are no query results - in effect a row to say there were no results for today. I am using SQL Server 2008.
I have created a report which uses 2 tables to store all daily transactions & a one row summary of those daily transactions for upto 4 countries - both tables are updated nightly by 2 SP and the unique identifier is a field called ID which contains the country code and date;
table1_detail;
store all daily transactions for 4 countries and the unique identifier is an ID which stores the country code and date (XX_ddmmyy) eg GB_280513. There may be transactions for upto 4 countries(GB/FR/IE/DE) per day or there may be none.
Table1:
Code:
ID DATE CUST VALUE ERROR ...etc
GB_280513 280513 101 10.50 YES
GB_280513 280513 102 90.00 NO
FR_280513 280513 201 25.00 NO
IE_280513 280513 301 60.00 NO
FR_280513 280513 202 10.50 YES
FR_280513 280513 203 10.50 NO
GB_280513 280513 103 20.00 YES
GB_280513 280513 104 5.00 YES
table2_summary;
summary of daily transactions per unique identifier (XX_ddmmyy) in table1_detail. When there are transactions per unique identifier in table1 the SP inserts a row summarising quantity, value, error count etc.
Table2:
Code:
ID DATE NO OF TRANS VALUE NO OF ERROR ...etc
GB_280513 280513 4 125.50 3
FR_280513 280513 3 46.00 1
IE_280513 280513 1 60.00 0
I need the insert into table2_summary to be able to insert a row everyday for each country showing zeros where there were no transactions for that day (ID) in table1;
Table2 expected results:
Code:
ID DATE NO OF TRANS VALUE NO OF ERROR ...etc
GB_280513 280513 4 125.50 3
FR_280513 280513 3 46.00 1
IE_280513 280513 1 60.00 0
DE_280513 280513 0 0.00 0
When there are no transactions in table1 for a day (ID) then the summary needs 4 zero rows inserted.
View 3 Replies
View Related
May 19, 2008
In my select statement I concatenate city+state+zipcode. In some cases the zipcode is 9 digits but is missing the '-'. How can I format zipcode to be '#####-####' when > 5 characters from the select statment.
Thanks,
Ken
View 1 Replies
View Related
Jun 6, 2008
Hey all - VERY new to SQL so I apologize if I butcher normally trivial things :)
Looking to run a query that will retrieve the number of results returned from a select statement...
Currently have a LicenseID table with a Software column...the statement that works on it's own that i've got is:
SELECT * FROM Software WHERE LicensesID = 2
Currently when I run that with the data so far I get 4 results returned to me...how can I add to that statement so that instead of displaying the results themselves, I just get the number 4 returned as a total number of results?
Thanks all!
View 2 Replies
View Related
Dec 16, 2013
I have a table with three columns. Name, book#, category.
I need to write a select statement that looks at the book# and category and returns all the names that match that into one joined our combined result. So if my name column had john, Jane, Jim, jack, and Steph in unique rows that matched it would bring back a resulted formatted as. John, Jane, Jim, jack, Steph. So I could place that in a field for reference.
View 4 Replies
View Related
