select * from tablename where ((fromdate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)) or (todate between Convert(datetime,'2007-19-2 10:00',103) and Convert(datetime,'2007-19-2 11:00',103)))
My query is not returning values when i am querying between '2007-19-2 10:00' and '2007-19-2 11:00'
Hi All,Sorry if the subject line is too obscure -- I couldn't think of a wayof describing this request.I have a table that contains approximately 1 million records.I want to be able to be able to select the top x records out of thistable matching variable criteria.Pseudo table records:custid, category, segment1,1,12,1,13,1,14,1,15,1,26,1,27,1,28,1,29,2,110,2,111,2,112,2,113,2,214,2,215,2,216,2,217,2,318,2,319,2,320,2,3So, what I'm trying to do is return a recordset, for example, thatcontains the top 2 of each variation of category and segment.ie:1,1,12,1,15,1,26,1,29,2,110,2,113,2,214,2,217,2,318,2,3The only way I can think to achieve this is in a while statement,performing individual selects against each combination, feeding thewhere criteria by variables that I automatically increment.I can't help thinking there's a much more graceful way of achievingthis?If anyone can give me any insight into this I'd be incrediblyappreciative!Many thanks in advance!Much warmth,Murray
I've got a big problem that I'm trying to figure out: I have an address table out-of-which I am trying to select mailing addresses for companies UNLESS a mailing address doesn't exist; then I want to select the physical addresses for that company. If I get multiple mailing or physical addresses returned I only want the most recently edited out of those.
I don't need this for an individual ID select, I need it applied to every record from the table.
My address table has some columns that look like: [AddressID] [int] [LocationID] [int]
AddressID is a primary-key non-null column to the address table and the LocationID is a foreign key value from a seperate Companies table. So there will be multiple addresses to one LocationID, but each address will have it's own AddressID.
How can I do this efficiently with perfomance in mind???
I have set up an sql server which has a column called times. This column is to hold race times however when i enter times such as 22:20:89 with the 89 being milliseconds i am not bale to input this it will only allow me to put times in where milliseconds are below 60. This is a problem especially for the shorter races where half a second is a big difference. Thanks Mike
When trying to connect to a server on a slow connection (satelite), Enterprise Manager times out. I am able to connect with Query Analyzer. Tried to change 'remote login timeout', but that did'nt help, EM seems to timeout long before this value is reached. Any ideas ?
I am trying to add a list of times together retrieved from my database.
They are from seperate records in the same table.
They are in a date format e.g. 01-Jan-2006 03:45:00, what I want to do is ignore the 01-Jan-2006 part as well as the :00 AM part and focus on the hours and minutes. I wish to add these up e.g. 03:45 + 04:45 = 08:30. Is there an easy way of doing this?
Below is the SQL statement of getting times from my database if its any help.
SQL StatementSELECT LENGTH_OF_VISIT FROM NOV.MAIN;
A colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Hello everyone, I have an odd issue and I can't seem to figure it out. I am using SQL Server 2005 and I am using Transactions in combination with Try/Catch blocks. My query (executing the stored procedure) never seems to finish the query in query analyzer. I have removed all statements that exectute or select, etc upon the database except for a simple Select 'test' as test so I would have something in my Begin/End blocks. Below is my stored proc: ALTER PROCEDURE [dbo].[ar_mainCheckRecon] @tripID int, @payment money, @adjustment money, @serviceType tinyint, @checkTpId int, @checkTlId int, @checkNbr varchar(20) AS BEGINSET NOCOUNT ON; BEGIN TRY BEGIN TRAN select 'test' as test
END TRY BEGIN CATCH RAISERROR('Error commiting transaction', 16,1) ROLLBACK TRAN SELECT '0' as success END CATCH
COMMIT TRANSELECT '0' as errorCode
END I call upon the sproc by running this line in query analyzer: exec ar_mainCheckRecon 433636, 0, 500, 0, 500, 0, 23 Is there something I am overlooking as to why the query keeps running and never stops? My current execution time is at 3 mins accoring to query analyzer! Thanks,John
When using a SQL Server DateTime column to store just times, e.g. '6:00 PM' I've noticed some weird inconsistency. If I insert a time in a SQL statement, such as... INSERT INTO myTable (StartTime) VALUES ('6:00 PM') It winds up going in as '1/1/1900 6:00 PM'. This is okay. This is in fact what I want (unless of course the base day for sql server is in fact 12/30/1899, which is my next question). If, on the other hand, I insert a time value by hand, using SQL Server Management Studio, then after I insert '6:00 PM' it winds up as '<Today's Date> 6:00 PM', i.e. '1/20/2008 6:00 PM'. Also, if I insert it using a SQL Parameter, such as... da.InsertCommand.Parameters.Add("@StartTime", SqlDbType.DateTime, 8, "StartTime") ...Then, if StartTime is 6:00 PM again, it also winds up going in as '<Today's Date> 6:00 PM'. Is there a way to control this behavior (other than to programmatically append a base date to the time I'm inserting)? Finally, what is the base day for SQL Server 2005? Is it 1/1/1900 or 12/30/1899? I think I've seen both. Thanks! Aaron
I have two tables: (results) one with numeric results and one with names (importance_scale)
SELECT * FROM results
name i1 i2 i3 i4 i5 ---- ---- ---- ---- ---- john 2 1 2 2 2 anna 0 2 2 2 2 phil 2 2 2 2 2 dave 1 0 2 2 2
SELECT * FROM importance_scale
imp_value imp_name --------- ------------ 2 very important 1 important 0 not important
i1,i2 etc. value it is a imp_value from table 'importance_scale'
I would like to make report which will show all results in this format (in example only first record): name i1 i2 i3 i4 i5 etc. ----- --- --- --- --- --- john very important important very important very important very important etc.
I was thinking about using CASE I don't want use cursor. What is the best way?
I want to enter times for running event performances (like 10:26.35 for a person's 2-mile time, for instance). I am using sql server 2000. This is an ongoing concern for me since I do a lot of work with running events. Can someone give me some direction as to how I can best deal with this?
The datetime data types do a lot of converting to 'time-of-day' and that is not what I want. For instance, if I enter a 2-mile time of 10:26.35 (a pretty typical 2-mile time) my db converts it to 10:26:35 AM.
If I use varchar data type there is a ton of code to write when I want to sort the data.
Jeff writes "I am trying to write a query to retrieve information that was processed between two times of the day (2:00 pm to 6:00 pm) from a date range... I am perplexed; I am new to SQL and am trying not to become frustrated, but this seems to be beyond my skill level. Any guidence would be greatly appreciated!"
Hi I'm new to SQl..I have some monthly data which is being encoded as Varchar...Say forthe month of January 2005 it wud look like '200501'. For each of mymonth I have a coloums which gives me datetime and volume of the job.This is what I'm doingSelectMonth,Time ,Sum(Volume)[color=blue]>From Table A[/color]Where (( Month like '200501%' ) and (Time between '2005-01-0102:00:00.000' and '2005-01-31 06:00:00.000))group by month, timeorder by monthPRoblem: What I want is all the volume between 2am and 6am on every dayof the month?The above query naturaly will give me everything between first and lastof the month...Any help is appreciated...Balaji
I am using an MS Access front end to input data into a SQL serverdatabase. From Access I am generating an update query utilising aninline function. My problem is that when I update a time value,instead of updating the field with something like 08:00:00 it updatesit to 1/1/1900 08:00:00. Is there a way to force the update to onlyuse the hours minutes and seconds and ignore the date part?Any help would be greatly appreciated.RegardsTrevor
Hi guys,I have a field in my DB called EventDate as a DateTime field,therefore it holds both the date and time together like this:'2004-10-14 08:42:57.000'.I need to add together all the times in this column for a particulardate range (BETWEEN).Any suggestions will be great.ThanksSunny:)
Hi, I am developing an app that manages race results and I need some advice on the best way to store the race times in sql server. As far as I know, the best datatype would be datetime. With the data stored, I will need to be able to do things such as:
Hello, I have been working on this stored procedure, it pulls the results that i want, but it takes a very long time to execute and about half the time it times out, i have tried changing the timeout settings on the sql server to 0 (no timeout) but it seems to have made no difference. Could anyone help with making the query a bit more effiecient? SELECT DISTINCT webStats.id, webStats.ip, webStats.useragent, browsers.browsername, os.osname, webStats.datestamp, webStats.hourstamp, webStats.hostname, webStats.refurl, webStats.refhost, webStats.entrypage, webStats.visitcount, webStats.country, searchengines.enginename, IpToCountry.COUNTRY AS CountryName FROM webStats LEFT OUTER JOIN IpToCountry ON webStats.country = IpToCountry.CTRY LEFT OUTER JOIN searchengines ON webStats.useragent LIKE '%' + searchengines.agentstring + '%' LEFT OUTER JOIN browsers AS browsers ON webStats.useragent LIKE '%' + browsers.agentstring + '%' LEFT OUTER JOIN os ON webStats.useragent LIKE '%' + os.agentstring + '%'
WHERE (webStats.datestamp BETWEEN DATEADD(d, DATEDIFF(d, 0, GETDATE()), 0) AND GETDATE()) ORDER BY webStats.datestamp DESCThanks for your help. Bart
I have some code that opens a SqlConnection to a MSSQL 2000 database. The connection opens great everywhere except inside my implementation of IPasswordProvider.GetPassword(). It just hangs there, and then throws a timeout. I have tried using both trusted connections, and userid/password connection strings. I notice that within GetPassword, the authenticated user is COMPUTERNAMEASPNET, whereas in the web method that actually is getting called, the authenticated user is my personal user account. The SqlConnection opens fine in the actual web method.
Can anyone tell me what could stop a SqlConnection from opening while inside GetPassword()? I kinda need to look up passwords in the database.
and then i wanted to exec this sp in another procedure i would have
exec my_insert( 1_value, 2_value, 3_value )
My question is how could i exec this will the result set of a select.... something like this
exec my_insert (select 1_value, 2_value, 3_value from another_table).
I know i could have this in an insert result type statement ie...
insert into dest_table (select 1_value, 2_value, 3_value from another_table)
but my insert routine is quite complicated and carries out some other functions so I would like to call (exec) a sp rather than repeating the complication in the select statement
I scheduled a Bulk copy operation, and have been getting some inconsistent failures.
Last night the job was set to run every 3 hours, I expect it to take about 1 hour to finish.
The second itteration of the job failed, the first and third ran fine. Here is the error from DTS
Any suggestions? Is there a better/stable Data Provider for SQL?
... DTSRun: Executing... DTSRun OnStart: DTSStep_DTSExecuteSQLTask_1 DTSRun OnFinish: DTSStep_DTSExecuteSQLTask_1 DTSRun OnStart: DTSStep_DTSBulkInsertTask_1 DTSRun OnError: DTSStep_DTSBulkInsertTask_1, Error = -2147217900 (80040E14) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error Detail Records: Error: -2147217900 (80040E14); Provider Error: 3621 (E25) Error string: The statement has been terminated. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040E14); Provider Error: 7399 (1CE7) Error string: OLE DB provider 'STREAM' reported an error. The provider did not give any information about the error. Error source: Microsoft OLE DB Provider for SQL Server Help file: Help context: 0 Error: -2147217900 (80040... Process Exit Code 1. The step failed.
I have an VB.NET web app which performs a fairly complicated SQL query. It seems in the morning, the 1st time the page is loaded (and query executed) it takes up to 10-15 seconds to complete loading. Sometimes it even times out. However anytime after that, the page loads up (even from another computer) in about 4-5 seconds. Can someone explain the reason for this and how I might fix the load times in the morning?
I see the following problem regarding a SQL function that returns a value.
We have the following query
SELECT c.Id_Customer, c.Name FROM t_Customers c WHERE c.Id_Status = fn_GetParameter('ID_Status.Active')
The idea is not hardcoding the status and other values on each query, and, since SQL Server does not support the definition of constants, we have a table with many parameters and we search them.
We defined the function "WITH SCHEMABINDING" and the SQL Server recognizes it as DETERMINISTIC, so I do not understand why it executes the function as many times as records in the t_Customers table, since every time it is executed it returns the same value.
We could define a variable, assign the value returned by this function to this variable and then use it on the SELECT, but this approach is useless if we use SQL instead of stored procedures (for example, in reports from reporting / BI tools).
Any explanation about why SQL chooses to execute the function many times, and any hint regarding how to make SQL Server execute only once the function will be very appreciated.
Hey, everyone. I'm new to database programming in SQL Server, and I currently have the 2005 express edition. I was wondering whether it was possible to check whether one time (h:mm AMPM) is less or greater than another (the other in this case being the GETDATE). I already made a user-defined function in order to extract the time from a datetime, since SQL Server doesn't support the time data type. The thing is that the value is returned as a char(8) in the 12-hour style HH:MM AMPM format and I'm sure that's what's screwing up the comparison function. What would I need to do to compare two times (24-hour or 12-hour, whichever is easier)?
create proc dbo.usp_CatchAddressException @tableName varchar(500) as -- alter proc dbo.usp_CatchAddressException @tableName varchar(500) as
begin set nocount on declare @sql varchar(700)
-- truncate table tempException set @sql = 'insert hava_dcde.dbo.STREET_EXCEPTION (id_town, id_voter, pre_value, nbr_exception, date_stamp) select a.id_town, a.id_voter, substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))), ''20'', getdate() from HAVA_DCDE.dbo.' + quoteName(@tableName)+ ' a where substring(a.ad_str1, 1, len(a.ad_str1) - charindex('' '', reverse(a.ad_str1))+1) not in (select nm_street from HAVA_DCDE.dbo.state_streets ss)' -- and a.id_town = + @tableName -- print(@sql)
exec(@sql) set nocount off end ---------------------------------------------------
when i run this SP 2 times, it will insert the values 2 times. what should i do if i don't want to insert the same values 2 times? I'm confussed, Should i use update? any input will be appreciated.
I have a column in a table that records when the date and time of an event took place.
Table Name: Chronicle Column Name: Created (of type DateTime)
I would like to select the Chronicle records that are between two dates. (e.g. 1 May 2001 and 20 May 2001) And I would like to select those records that are between two times. (e.g. 6:00am and 1:00pm)
Does anyone know how to do this or have any pointers for me? I can see it would be easier if I had the date in one column and the time in the other. Can it be done without doing that?
Using the dm_exec_query_stats in 2005, I know I can get the number ofexecutions for a particular sql_handle, but is it possible to get thenumber of execs for a SQL in version 7 or 2000? Also is it possible toget reads/writes/etc in these early versions?Thanks.
This seems so simple yet I can't figure it out.I have a table that has two important columns for this query.Column A has varcharColumn B is datetimeAll I want to do is select any record that is between 5:00 am and10:00 am regardless of what date it falls under.In my brain I seeSelect *From <table>Where B Between Like ‘%5%am' and Like ‘%10%am'This chokes and I suppose its because Between is literal and Like isvariable.I cant convert column B to just times because I still need to see thedate in the results of the query.Thanks in advance for help
