Hello, I am a SQL rookie. I have followed the tutorial and installed MSDN as it says. However, I am unable to create a database with WebMatrix. I keep getting an error that reads "SQL Server does not exist or access denied. ConnectionOpen (Connect())."
When I loaded the SQL, everything seemed to go well. I got all of the results that the tutorial said I should.
Please advise on my next steps. Thank you in advance.
JS
In my ASP.NET app, I'm executing a stored procedure via a SQLCommand the searches a customer database. I believe the default timeout is 90 seconds. I'm curious of what happens to the SQL Server Stored Procedure after timing out from the ASP.NET application. Does it timeout at the same time or do you have to set up a value in SQL Server?
View 1 Replies View RelatedIf you have a SQL server setup that isn’t using a SAN but just a normal raid array and you wanted to utilize a SAN now.
What are the steps, I'm guessing that you will need to start the services under a domain user correct?
Is it as easy as detaching the DB and then reattaching the DB on the SAN?
I'm assuming you need to map the data and log arrays from the server to the SAN correct?
I can’t seem to find any documentation on moving a server to a new SAN. Can someone post links if you have them?
Do you need ENT edition or is Standard OK .
Thanks for your help.
Hi
I'm trying to set up a new job to update a field in the table, I've managed to get the select syntax to work, but when I added an IF statement and Update syntax it didn't like it and the following error was shown:-
Server: Msg 156, Level 15, State 1, Line 9
Incorrect syntax near the keyword 'BEGIN'.
This is the syntax I'm trying to use for the job:-
USE EmployerEngagement
IF (SELECT On_Stop
FROM tblEmployer LEFT OUTER JOIN tblWP_Details
ON tblEmployer.Emp_ID = tblWP_Details.Emp_ID LEFT OUTER JOIN tblVetting
ON tblWP_Details.Record_ID = tblVetting.Record_ID
WHERE tblEmployer.On_Stop = 0
AND tblVetting.Next_Vett_Date <= GETDATE())
BEGIN
UPDATE tblEmployer
SET On_Stop = 1
END
Basically I just want to change the On_Stop value from 0 to 1 if the Next_Vett_Date is before or on todays date.
Am I using the wrong syntax for this?
Thanks
How do i do it? do i have to set up an ODBC?
View 20 Replies View RelatedHello,I've noticed on my DTS that it is connecting to the remote SQL Servervia Named Pipes. Not sure why I've been getting the following error:[DBNETLIB][ConnectionWrite (WrapperWrite()).] but I wanted to changethe DTS from using Named Pipes to use TCP/IP. How to do it?Also, if anyone has any clues on what this error means, please let meknow!Step Error Source: Microsoft Data Transformation Services (DTS) DataPumpStep Error Description:The number of failing rows exceeds the maximumspecified. (Microsoft OLE DB Provider for SQL Server (80004005):[DBNETLIB][ConnectionWrite (WrapperWrite()).]General network error.Check your network documentation.)Step Error code: 8004206AStep Error Help File:sqldts80.hlpStep Error Help Context ID:0Tnks!
View 1 Replies View RelatedI am trying to connect to my database in SQL SERVER EXPRESS via dreamweaver. I am trying to create DSN connection but when i click on sql server in the optionlist it lists about 100 options of the sql server i want to connect to. How do I find out which one is the one I have my tables in and the sql server express that I use.
Cheers
I am unable to set the value of my SqlParameter unless it is to a string.sqlCmd.Parameters.Add('@myParameter', SqlDbType.Bit).Value := false;
Setting it to false or 0 results in error: "Incompatible types: 'Object' and 'Boolean' (or 'Integer')"
I've tried to cast them as objects and that didn't work. I don't understand why something like 'false' (as a string) will.
FYI: I'm using Delphi.NET and hating it.
sry im an idiotbut how do u take like "SELECTbla FROM blar WHERE blam=blfda" and make the thing it "selects" into a variable thnx
View 5 Replies View RelatedHi, I have just started with ASP, and have a problem. I have created a stored procedure which looks to a specific tablename for information, based upon the users choice from a dropdown list.
The control works fine when executed from within visual web developer, and I manually enter the value that the variable expects. However I can not get the dropdown listbox value to be written to the SQL value. I have tried for days, traweled the net for answers, borrowed 3ft in height of SQL books! so either I am doing something fundamentally wrong, or I am missing something. My SP is:
ALTER Procedure GenericTableSelect
@tablename VarChar(20)
AS
Declare @SQL VarChar(1000)
SELECT @SQL = 'SELECT [base model] FROM '
SELECT @SQL = @SQL + @tablename
Exec ( @SQL)
and from the page the command to call it is:
SelectCommand=generictableselect></asp:SqlDataSource>
But this fails to compile and comes back with "@tablename not defined"
any pointers in the right direction would help.
The object of this is for two drop down boxes - the first is populated from one database of categories, the selection of which populates the second drop down list with items from within that category.
Cheers,
Richard
Hello all,
I've gotten approval at my work place to implement a new web server cluster. We currently have one web server running Windows 2003 and one SQL 2005 box. I've gotten approval to purchase 2 new web servers that will eventually become our primary servers.
I've browsed Microsoft's site but can't seem to find any FAQ's or How-Tos on clustering that are of any help. Is there anyone out there who has some info that could help me get started?
Thanks.
Richard M
I have been using MySQL as the back end of my .Net 2.0 applications for a while using a custom membership provider without any problems.Having now switched to a new webhost which supports both MySQL and MS SQL Server 2005 and also creating a new site thought I should set up the new site to use MS SQL..... I am having trouble however setting up the SQL server to act as the membership provider. Following the advice on here I tried using aspnet_regsql.exe... Firstly, when trying to get the list of databasses on the remote server I get the following error: Failed to query a list of database names from the SQL Server. Invalid object name 'Sysdatabases' If I then just type in the name of my database and go through to the end I get the following error:Exception:An error occurred during the execution of the SQL file 'InstallCommon.sql'. The SQL error number is 8152 and the SqlException message is: String or binary data would be truncated. I can connect to my MS SQL server remotely without any problem using the likes of MS SQL Server Management Studio Express. Is there any other way I can setup the databases needed for user and roles access control or is the usage of MS SQL much more complicated than what MySQL was?
View 4 Replies View RelatedI've received the error - Setup failed to configure the server. Refer to the server error logs and setup error logs
View 3 Replies View RelatedHello
my host required to have a fix IP in order to access his SQL Server database.
I got the fix IP, but I don't know where to define the port number while creating a SQL Server connection in Enterprise Manager.
Anyone knows ?
Thanks a lot
Johann
hey guys heres my problem iam trying to install SQL server2000 but i keep on running into problems....??
here is what iam having problems with
setup SAPWD="AStrongSAPwd" SECURITYMODE=SQL
it keeps saying the instance name specified is invalid there has to be an easyer way to run the program...??
i have all ready set up an instance name and the SAPWD.
any suggestions?? please help
I have the following to create a new table....
CREATE TABLE dbo.test (Id varchar(20) NOT NULL PRIMARY KEY, Name varchar(256) NOT NULL, visible bit NOT NULL )
I need to set the default value of the bit visible to 1.
How can this be done using a T-SQL statement?
Thanks,
Zath
Hi all:
How can I change the Default value of a column in a table using sql?
for instance I have a table called Phone and I have a field called AreaCode and the default now is '123' . I would like to change it to '456'.
Thanks,
Nisha
Can someone point me in the direction of a good place to find out how to set this up properly please.
thanks
Hi
I am using Windows NT 4.0, SQL Server 6.5 and Exchange 5.0. I would like to setup SQL mail.
I tried to create mail login, NT expects for MS mail server name and login.
When i enter my exchange server/login name does not recoganise.
Any guide please.. Thanks in advance
Moorthy
I am getting the message
DESCRIPTION: Error: 1204, Severity: 19, State: 1 The SQL Server cannot obtain a LOCK resource at this time. Rerun your statement when there are fewer active users or ask the system administrator to check the SQL Server lock and memory configuration.
it is a 3rd party app I can't change with some ugly sql.
My current lock setting is
min max config run
locks 5000 2147483647 0 0
Do I need to change the min value to higher? What would be a good value to try, I have 16 gig of memory on the server
Hi,Patrick and VK
Thank you for your help!
the setting is follow : system account(service in control panel)
create a NT user : netbackup(privilege SA in SQL security manager)
remote server setting->
remote server login name: netbackup
mapped login name : sa
I am unclear the setting! Please tell me the detail!
best regard!
Steven/98.9.1
Hello, Iam new at this SQL stuff and want to setup an SQL Server at work and need to know what do i need to use this software. I have a EVAL version of 6.5 and was told you need MSACCES or Visual Basic. Is there anything else that i need to use this? Thanks!!
View 14 Replies View RelatedDoes anyone know if it is possible to set permissions on certain fields in a way that will restrict access for reading a field but will allow a user to do a select using that field? I am looking for a way to block read access to a sensitive field but I want to be able to query other fields using the value that is in the field.
Thanks.
Hello, I am trying to setup a Microsoft Express SQL 2005 server to be accessed by PHP. PHP is setup just fine, the problem lies in the database (or so I believe). Quite simply, the problem is that it won't connect. I need to know if I need to have any special configuration on the database for it to connect. I am fairly positive that I have all of the login information correct, so that is not the problem.
View 3 Replies View RelatedHi, I have this query basically im trying to set the @db to the current database depending on the quarter. This will be used in a package to change the database that the package will use.
DECLARE @db nVarchar(4000)
SET @db = N'TESTDB' + RIGHT(DATEPART(yy, GETDATE()), 2) + '_' + CASE WHEN DATEPART(m, GETDATE()) IN ('11', '12', '1')
THEN 'Q1' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('2', '3', '4') THEN 'Q2' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('5', '6', '7')
THEN 'Q3' ELSE CASE WHEN DATEPART(m, GETDATE()) IN ('8', '9', '10')
THEN 'Q4' END END END END
EXECUTE sp_executesql @db, N'@level tinyint', @level = 35
I get the error Incorrect Syntax near 'TESTDB04_Q3'.
What is the best way to set up a sql server db that will be accessed via web(asp/ado) and windows (vb/ado) environemnts. I am concerned with security and authentication.
Thanks!
. The BPA recommend that the model database setting for the items below be set to on. I can accomplish this task through the query analyzer and run the set command. (Set ANSI_NULLS on). The response is positive but when I re-run the report the setting are back off.
Why???
•QUOTED_IDENTIFIER
•ANSI_NULLS
•ANSI_WARNINGS
•ANSI_PADDING
•ANSI_NULL_DFLT_ON
•CONCAT_NULL_YIELDS_NULL
Hello there, im new here and wanted some help, i would be very grateful to anyone that can help:
I am setting up a DSN for my website (www.t-f-l.com, it may make more sense if you visit the site) i need it so members can sign up to the site (for the exact problem, click 'sign up now' on the website
I have set up the DSN but it says i need to link it to the database tables via MS access, im not sure at all how to do this...please can someone help
please explain in real idiot language....as i am new to this
is there any way i can set IDENTITY_INSERT = ON
permenately for the whole DB
Hi all
I am having serious problems with connecting to SQL Server via ASP.
I have created a User DSN, however when I am asked if I want to use Windows Authentication or SQL Server authentication, I feel I am having problems. If I choose SQLServer authentication, I am asked to enter a username and password which I do (does this need to be a predefined username and password?). I do this and the connection fails with an error saying that the login is not associated with SQLServer. If I choose windows authentication its fine, but when I try to connect via asp using the username and password I login to get into the machine and the DSN name I set up during the DSN setup, the same error comes up. (for windows authentication does the asp code differ from SQL Server authentication?). I really need help here
Hi
I currently have an SSIS package which looks for an excel file and uploads its. The connection is set up to look for a file upload.xls in a folder called Upload on the C drive. So each time a file needs uploaded, the upload.xls is copied into C:Upload. This all works fine. However now I need to change it so that the files that are uploaded take the format Upload10012007.xls, so they will have the date appended onto the end of the Upload.
How do I go about setting up my connection to look for Upload10012007.xls? The file name will be dynamic as it will change each day but it will always contain Upload at the start of the filename.
Thanks for your help,
Michael
MichaelRaj Arokiyasamy
Hello again
sorry to bother again but I am hvaing difficulty setting up the SQL server 2005. I have downloaded and installed the following
.Net Framework 2.0 Serv Pack 1
MS SQL server 2005
MS SQL server Native Client
MS SQL server Setup support
MS SQL server VSS Writer
AdventureWorksDB.msi as a sample database i believe
When I want to launch the program I point to Programs, that dispplays MS SQL Server 2005 which displays Configurations Tools which when pointed displays
1) SQL Server Configuration manager (has the icon with little hammer and folder whatever it is,
2) SQL Server Error and Usage reporting
3) SQL server surface area configuration
None of them is letting me to open a screen to see any tables and write a query.
What am i missing?
thanks
ted
Hi
How can i set the date format to dmy for a entire database
I am using VB6.
my computer regional setting date is dd/mm/yyyy
thanks
asm