Setup And Upgrade :: Unknown Error Applying The FILESTREAM Settings
Oct 2, 2013
I am trying to enable FILESTREAM on a SQL 2012 installation that is supporting a Sharepoint 2013 implementation. When I try to enable FILESTREAM using the SQL Server Configuration Manager I receive the following error:
There was an unknown error applying the FILESTREAM settings.
Check the parameters are valid. (0x80041008)
I have done this succussfully in the past in SQL2008R2/Sharepoin2010 environment but this is my first attempt with SQL2012/Sharepoint2013 and I am not sure how to proceed with troubleshooting.
What's the diffrence between the Built-In account 'SERVICES' and the 'NT SERVICEALL SERVICES' ?I want to dploy a group poicy for 'user right assignment' - 'log on a service' to a server, which curretnly has among other things the 'NT SERVICEALL SERVICES' however i can't replicate this account for my GPO, (even locally on the server),I deploy the GPO and overwrite the server settings for 'user right assignment' - 'log on a service' and won't be able to revert back to the original settings..
I'm trying to install SQL Server Management studio 2012 on my Windows 7 (x64) standalone laptop. When I click "New SQL stand-alone installation..." it runs a Setup Support Rules check and always fails "Setup Account Privileges". I've looked into the error and I keep getting that I need to change security rules but I don't have that option in window 7. How do I get around this without having to resort to a computer running Windows Server?
I have Visual Studio 2013 premium installed along with Localdb v11. I just want to connect and manage my database engine through SSMS when developing any application.
I saw following point on Technet article about RBS.The local FILESTREAM provider is supported only when it is used on local hard disk drives or an attached Internet Small Computer System Interface (iSCSI) device. You cannot use the local RBS FILESTREAM provider on remote storage devices such as network attached storage (NAS).It looks like that we cannot use FILESTREAM on Failover Cluster because to setup Failover Cluster we need to have NAS. But then the NAS is made available locally for Failover Cluster so FILESTREAM should work right?Found another article which talks about setting up FILESTREAM on Failover Cluster. URL...
I'm using MS Report Designer 2005 and have created a report that uses a cube, with a dimension set up to convert null values to unknown (nullProcessing = UnknownMember).
When I create a parameter using the checkbox in the graphical design mode's filter pane, Report Designer automatically sets the constrained flag, eg:
When running the report and selecting the 'Unkown' value from the parameter list, the error 'the restrictions imposed by the CONSTRAINED flag in the STRTOSET function were violated' occurrs.
How can I prevent the constrained flag from being used, or am I doing something wrong with converting null values to 'Unknown'?
We setup a new Shared SQL server 2014 Web and transferred all SQL databases over. However when customers connect via SQL Management Studio they now get VIEW STATE error when right clicking on any table on any database.
when i open my computer and want to use SQL SERVER and when iam connecting it this error will occur "A network related or instance specific Error in SQL SERVER 2012" Then aim going to Services and Find SQLSERVER and start the services and it will connect..My Question is that why every time iam going to Start the services..I want to connect Automatically when i click on connect button in sql server its very rediculous to go evrytime in Services. i update my window 8.1 to windows 10 before it will connect automatically no need to go in services to start the SQLSERVER.
When I'm trying to create a database diagram for my tables., First it prompts me saying that - "This database does not have one or more of the supported objects... Do you wish to create them? I know this is normal when you don't have any diagrams. But after clicking "Yes", I get the following error which is attached.
I tried changing the database Owner to "sa". But, still the same error. Interestingly, other databases that are already having the database diagrams (created by others), are allowing me to create new diagrams in those databases. The only difference is, I created this database where I'm trying to create diagrams on. How do I get this working.
Unhandled Exception: System.Security.SecruityException: Request failed. at Microsoft.SqlServer.Chainer.Setup.Setup.DebugBreak() at Microsoft.SqlServer.Chainer.Setup.Setup.Main()
Then the Managed SQL Server Installer box pops up with Managed SQL Server Installer has stopped working.
I have destroyed the cluster in failover cluster manager and then i am trying to remove node from the sql server installation centre.I am facing the cluster node and cluster service verification errors.I am not able to start the cluster service in services as well.
We're doing upgrades from SQL 2008 R2 to SQL 2014. This is blocked due to RS is installed but not configured. Our desired action is to uninstall RS and proceed with the upgrade. But when setuparp.exe is raised, it does not list all the features on the 'Select Features' page. In fact, it only lists the last 2 shared features (SQ Client Connectivity SDK and Microsoft Sync Framework). However, all items appear to be listed on the 'Select Instance' page including RS. I've seen this issue on 2 of our SQL 2008 R2 Servers already.
I am setting up the replication with the scripts which used to setup in MSSQL2005 (non-cluster server). After I run the script and start the snapshot agent, log agent or distributed agent, it prompts,
Unable to start execution of step 2 (reason: Error authenticating proxy abc.comadmin9, system error: Logon failure: unknown user name or bad password.). The step failed.
abc.comadmin9 is the administrator for all cluster, mssql service and I am sure that the username and password is correct.
I am running a number of SQL instances on my PC. Within the network, I have think server with various System Center components. For compatibility reasons, some features of System Center 2012 R2 had to be delegated to different SQL databases. My question is, because there is now more than one IP address on my system, and each instance of SQL is assigned to its own IP, is there a way to setup DNS and SQL so the namespace points to the desired IP address? For Instance:
MSSQL2008 instance is set to run on = 11.12.13.1 MSSQL2012 is set to run on = 11.12.13.2 IN DNS: A Record: Mike-PC = 11.12.13.1 A Record: Mike-PC = 11.12.13.2
If I want to use MSSQL2008 by specifying Mike-PC as the DNS name, how would I do that with 100% accuracy? If there is another way to get the job done, I am more than willing to approach this differently.
Just upgraded a users computer from 7.0 to 2000. All previous SQL Server Registrations are gone IP Addresses, User Names and Passwords arent readily availiable. Are the old connections stored in a DLL or Ini that I can place in the SQL 2000 folder to regain those or do I need to recreate some DSNs?
Can the template.ini be setup to upgrade a previous version of MSDE if it exists or just install it if it does not?
I currently have ADDLOCAL=SQL_Engine and UPGRADE=SQL_Engine INSTANCENAME=MSSQLSERVER in the file but that does not seem to do it if the server does not exist.
Am I going to have to create two seperate ini files and tweak my install program to select the specific one or am I missing a simple step?
This is what I want to do:1. Delete all tables in database with table names that ends with anumber.2. Leave all other tables in tact.3. Table names are unknown.4. Numbers attached to table names are unknown.5. Unknown number of tables in database.For example:(Tables in database)AccountAccount1Account2BinderBinder1Binder2Binder3.......I want to delete all the tables in the database with the exceptionof Account and Binder.I know that there are no wildcards in the "Drop Table tablename"syntax. Does anyone have any suggestions on how to write this sqlstatement?Note: I am executing this statement in MS Access with the"DoCmd.RunSQL sql_statement" command.Thanks for any help!
I just installed SQL Server 2005 on Windows Vista. I am getting an error "An unknown error occurred in the WMI provider. Error Code 8000000A" when connecting to a web server. The reporting services is running. Is there any other installation that is missing. Please help.
I am getting the error: "Cannot connect to WMI provider. You do not have permission or the server is unreachable."I tried the solution posted on the Microsoft support page involving a command prompt and the mofcomp "%programfiles(x86)%Microsoft SQL Server<var class="sbody-var"> numbe r</var>Sharedsqlmgmproviderxpsp2up.mof"...This still does not fix the problem, the result of running the above is: Parsing MOF file: C:Program Files (x86)Microsoft SQL Server110Sharedsqlmgmp roviderxpsp2up.mof...MOF file has been successfully parsed...Storing data in the repository..An error occurred while processing item 1 defined on lines 4 - 7 in file C:Prog
Is there way to completely re-install the Configuration Manager? One post suggested the Access denied was Administrator rights but I have full Administrative rights to everything so I don't see that being the problem.
So, I just downloaded and installed Windows 8 and SQL Server 2014 Developer. I used to have Visual Studio, that seems to be gone now. Can't find it. I can't figure out a way to get to SSIS or SSAS.
I noticed accidentally today on my PATH and discovered that I have several variables for different sql versions. I can understand this as I have upgraded from 2008, to 2012 then 2014. Here are the list of variables
when i install sql server 2005 in cluster. I have error at Setup process screen --> the selected components are being configured.all the components are failed.I am using domain account with administrator account privilege on both server.OS : windows server 2008 on virtual machine..when i install sql server agent is enable to select during setup..
I am using windows 8 and I have only one user in laptop. While installing SQL 2014, I am getting an error (Missing System Administrator). Under SQL Server Agent and SQL Server Database I have select the system user and gave the password but still I am getting the error.
I'm trying to do a SQL 2008 cluster installation.I installed one node and now I'm trying to add a failover cluster node.in the "add Node Rules" I get following message:
Rule Check Result...Rule "SQL Server Database Services feature state" failed.The SQL Server Database Services feature failed when it was initially installed. The feature must be removed before the current scenario can proceed.
If I close SSMS, it restarts itself as if it crashed and trying to restore itself. Even if I hit cancel as it's restarting, it will restart itself yet again. This happens twice. what's causing this?
