Strange View!!!
May 4, 2004NO MIRACLES !!!!!!!!!!!!!!
(see point number 8 in Brett's list)
ADVERTISEMENT
Strange View Results
Jul 20, 2005Bit of an obscure one here, so please bear with me. I have two copiesof a database which should be identical. Both have a complex viewwhich is identical. I can open the views and the data is as expectedand match. I can query it in several ways as detailed below. The 5thversion of the simple query below based on the second copy of the viewfails, but works under the first copy./*1 Statement below works*/SELECT *FROM AgentHierarchyWHERE AdviserId = 6069819/*2 Statement below works*/SELECT *, AH.AdviserLastName, AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819/*3 Statement below works*/SELECT *, AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819/*4 Statement below works*/SELECT AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AH/*5 Statement below fails*/SELECT AH.AdviserLastName + ', '+ AH.AdviserFirstNameFROM AgentHierarchy AHWHERE AdviserId = 6069819The error I get is to do with conversion of data within the view. It'sa little complex, but the view works fine. It looks to me like when Irun the 5th statement above, it re-runs the view and then finds anerror.So, I took the complex view and ran that with the data output into atemporary table with the queries above run against that, and it worksfine. The problem is that the statement I need is based around the 5thone above (part of an update statement).I'm struggling to understand why some of the queries above work andone doesn't. If you look at 3 and 5 I'd expect them both to fail. Ifit failed consistently I could get further into it.The problem is that it's a little difficult to get the view itselfchanged as it was supplied by a third party, but if it hasn't changedand the data hasn't changed then it's got to be something else causingthe problem.Anyway, as I said, it's a bit obscure, but if this sounds familiar I'dbe interested in your opinion.Thanks in advance.
View 4 Replies View RelatedStrange Behaviour Of Data Source View
May 29, 2008
I have a fact table which is a custim query in the data source view, I process and work with the data, after somewhile I make some changes in the data source view query but all my changes does not reflect in the cube after processing the same old data returned.
please help ASAP, I want to fix this issue
Strange, Very Strange (BIDS)
Jul 19, 2006Hi everyone,
I€™m suffering a queer behaviour when I use BIDS. Concretely, when I open a dtsx from my project (it has 10 packages) many times Sequence Container and Data Flow tasks are invisible. I mean, its lines are not visible at all whereas its titles are. I mean, what you see is just a white box€¦
Then, I€™m gonna Data Flow layer and I have to do double-clik over the tasks and are visible but on Control Flow I don€™t see how to solve.
Curiously in our development and production server such behaviour doesn€™t happen (we are accessing by mean Terminal Server from our workstations)
How odd!. Everything is fine except this.
I want to remark you that such project has been copied from the server, this is, these packages are been built on the server
Thanks for your thougts or ideas,
Creating Index On A View To Prevent Multiple Not Null Values - Indexed View?
Jul 23, 2005I am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedWrite A CREATE VIEW Statement That Defines A View Named Invoice Basic That Returns Three Columns
Jul 24, 2012Write a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
Calling A Stored Procedure From A View OR Creating A #tempTable In A View
Aug 24, 2007Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
Different Query Plans For View And View Definition Statement
Mar 9, 2006I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies View RelatedAlter View / Create View
Aug 14, 2000I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
Updating My View Changes My View Content
Feb 17, 2006I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help
Now This Is A Strange One.
Mar 6, 2007I have a datasource where i assign the control Parameter value depending on whether theres a value in the querystring or a gridview selectedvalue is indeed selected.When i do this using a querystring it works fine, however, when i do it using gridView_selectedIndexChanged it doesn't work.Here's the code <asp:SqlDataSource ID="jobDetailsDS" runat="server" ConnectionString="<%$ ConnectionStrings:promanConn %>" SelectCommand="SELECT tblJobs.intJobId, tblJobs.intJobStaffId, tblJobs.intJobUserId, tblJobs.intJobCategoryId, tblJobs.strJobTitle, tblJobs.strJobDesc, tblJobs.strJobNotes, tblJobs.dateJobLogged, tblJobs.dateJobDeadline, tblJobs.dateJobCompleted, tblJobs.intJobPriorityId, tblJobs.strJobSolution, tblJobs.boolJobCompleted, tblPriority.priorityName, tblPriority.id, tblPriority.priorityOrder, tblStaff.staffName, tblStaff.id AS staffID, tblProblemCategoriesLookup.strProblemCatName, tblProblemCategoriesLookup.intProblemCatId, tblStaff_1.id AS Expr1, tblStaff_1.staffName AS UserName FROM tblJobs INNER JOIN tblPriority ON tblJobs.intJobPriorityId = tblPriority.id INNER JOIN tblStaff ON tblJobs.intJobStaffId = tblStaff.id INNER JOIN tblProblemCategoriesLookup ON tblJobs.intJobCategoryId = tblProblemCategoriesLookup.intProblemCatId INNER JOIN tblStaff AS tblStaff_1 ON tblJobs.intJobUserId = tblStaff_1.id WHERE (tblJobs.intJobId = @intJobId)" InsertCommand="INSERT INTO tblJobs(intJobStaffId, intJobUserId, intJobCategoryId, strJobTitle, strJobDesc, strJobNotes, dateJobLogged, dateJobDeadline, intJobPriorityId, boolJobCompleted) VALUES (@intJobStaffId, 56 , 39, @strJobTitle, @strJobDesc, @strJobNotes,{ fn NOW() }, { fn NOW() }, @intJobPriorityId, 0); "> <SelectParameters> <asp:Parameter Name="intJobId" Type="int32" /> </SelectParameters> <InsertParameters> <asp:Parameter Name="intJobStaffId" Type="Int32" /> <asp:Parameter Name="strJobTitle" Type="String" /> <asp:Parameter Name="strJobDesc" Type="String" /> <asp:Parameter Name="strJobNotes" Type="String" /> <asp:Parameter Name="intJobPriorityId" Type="Int32" /> <asp:Parameter Name="intJobUserId" Type="Int32" /> </InsertParameters> </asp:SqlDataSource>Code Behind ElseIf dest > 0 Then jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.SelectParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") notesDS.InsertParameters.Item("intJobId").DefaultValue = Request.QueryString("dest") gvActiveJobs.Visible = "False" End If End Sub Protected Sub gvActiveJobs_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles gvActiveJobs.SelectedIndexChanged gvActiveJobs.Visible = "False" jobDetailsDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.SelectParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue notesDS.InsertParameters.Item("intJobId").DefaultValue = gvActiveJobs.SelectedValue End Sub I also debugged and checked the value of gvActiveJobs.SelectedValue and it is what i was expecting but its still no good.Can anyone help?ThanksMatt
View 2 Replies View RelatedVery Strange
Nov 19, 2001I moved a table from one file group to another file group. After moving the table the row count show 0 but when I open the table it’s returning all the rows. Is something wrong with the table? Do I have created a cluster index and drop on the table?
View 1 Replies View RelatedStrange Fix
Aug 2, 2006Hi,
I have table in my db thats used as a temporary table. At the end of the day it contains thousands of records which get summarized then all are deleted. I recently moved the application over to a new server with pretty much the same hardware config and noticed a big performance hit when running queries on this temp table (455 milliseconds as opposed to 1) In short, the fix was dropping the table and re-creating it.
Anybody know how this could be? I know that even if you delete records from a table, the table still seems to retain its physical size on the hard drive, could this have something to do with it?
Thanks
Strange!
May 4, 2004CREATE TABLE #users(users varchar(50),pasw varchar(50),title varchar(50))
insert into #users select 'test','abcdef','ceo'
SELECT * FROM #users
alter table #users alter column pasw nvarchar(50)
update #users set pasw=pwdencrypt(pasw)
SELECT * FROM #users
What happens to the TITLE column?
I had a table like the above with users and passwords in the Production DB. The password column had VARCHAR type. I changed it to NVARCHAR and encrypted the passwords. When i executed the SELECT *, the title column appeared like this. :eek:
If i query the table by column names instead of * i see the correct values. I couldn't understand what behaviour is it.
Howdy!
Strange
May 22, 2008Hi Experts,
Am able to restart my local sql server using a login which dont have a sysadmin privileage.This login only have access to a particular database .Its only having datareader and datawriter as DB roles but still am able to restart the server.Please help
TIA
RKNAIR
Strange Error
Aug 3, 2006I am using c# and ASP.NET 2 and I am getting a very strange error. I
have a field called CompanyID in SQL Server 2005, and it allows null
values in it. When this CompanyID is not NULL, ie for example it is
202, then when i press the update button it allows me to update
perfectly in the database. However if the CompanyID is NULL,
and I try to update the companyID, to lets say 202, the application
just crashes with the following message:- System.InvalidCastException: Object cannot be cast from DBNull to other types. I tried to set some breakpoints in the application to debug, however it does not even pass through these breakpoints! Any ideas on what the problem can be or how I can debug? Thanks for your help and time Johann
Strange Behaviour
Oct 3, 2006This is the actual statement displayed from Response.Write in classic ASP. INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '06-012497',TaskNum,TaskDesc,TaskMemo,Account,'2006-Oct-3',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum = '000002' There are 4 records returned from the SELECT part of the statement. In some situations, 4 records are inserted to WOTasks table, in others, only 1 record is inserted. I can't find out why 1 record, instead of 4, record is inserted. A form page submits the form to the save page using post method. The above statement is contained in the save page. When one of the form textbox is filled, 1 record is inserted. When the textbox is not filled, 4 records are inserted. You may think the textbox has something to do with the behaviour. I also think so but the content of the textbox does not affect the sql statement. In both cases, the insert statement is the same. In the actual codes, only strings in quotes are variables and the rest are hardcoded. When I run the statement in SQL Server, 4 records are affected. No such problem when connected with Access.The actual code belowSub AddTask(ByVal proc, ByVal wonum) Dim sSQL sSQL = "INSERT INTO WOTasks (WoNum,TaskNum,TaskDesc,TaskMemo,Account,ModifyDate,Estimate,TaskHours,Unit,UnitCost,TotalCost) SELECT '" & wonum & _ "',TaskNum,TaskDesc,TaskMemo,Account,'" & curDate & "',1,TaskHours,Unit,UnitCost,TotalCost FROM Tasks WHERE procnum='" & proc & "'" 'Response.Write sSQL:Response.End conn.Execute sSQL, , 128 End Sub
View 2 Replies View RelatedStrange SQL Issue
Jan 20, 2008Hi there I have this statement I have written as follows:strCommand = "SELECT * FROM tblstock WHERE Type='"&Statement &"' AND Description like'"&criteria &"%' OR Tag like'"&criteria &"%'OR Location like'"&criteria &"%' OR LAN like'"&criteria &"%' OR RAM like'"&criteria &"%' OR CD like'"&criteria &"%' OR OS like '" &criteria &"%' OR SN like'" &criteria &"%' OR DeviceStatus like'" &criteria &"%' ORDER BY " &sSortStr The variable "Statement" is passed into the sub as "PC" which means only records of type "PC" should be displayed along with any other criteria. The issue I'm having is that when I specify criteria I'm also recieving other types eg "Cameras" if they contain any of my criteria.. I can't understand how because in the statement I tell it only to display records of type "PC".. Anybody know what I'm doing wrong? Thanks
View 3 Replies View RelatedStrange Behavior
Feb 1, 2008I've done a new tabel that insert the UserId that in a uniqueidentifier get from Membership.GetUser().ProviderUserKeySo if I want to make a select statement threw storedprocedure in codebehind it runs as it shouldCode behindDim GetCustomersCars As CustomerCarByUserId = New CustomerCarByUserId MyCars.DataSource = GetCustomersCars.CarByUserId(Membership.GetUser().ProviderUserKey)MyCars.DataBind() But in when I use ObjectDataSource it fails<asp:ObjectDataSource id="ObjectDataSource1" runat="server" selectmethod="CarByUserId" typename="CustomerCarByUserId"> <SelectParameters> <asp:Parameter defaultvalue="Membership.GetUser().ProviderUserKey" name="UserId" type="Object" /> </SelectParameters> </asp:ObjectDataSource>I've tried with Membership.GetUser().ProviderUserKey.ToString(), but that doesnt work. Error message:InvalidCastExceptionI connect to the same source in both cases.Any one with an Idee ?
View 1 Replies View RelatedA Strange Error Here...
May 13, 2008So we currently are running a SQL 7 Server, which hopefully we will be updating this year but untill then we're stuck. I've got a web app using ASP.NET 2.0 and on occasion I get this error:
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - Only one usage of each socket address (protocol/network address/port) is normally permitted.) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open()
Very Strange Error Can Anyone Help With .
Mar 25, 2004I Some sql that it keeps throwing the following error
SqlDumpExceptionHandler: Process 52 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
Here is the sql
UPDATE dbo.temptable
SET code = 'MM'
FROM dbo.temptable T
JOIN dbo.Item I WITH (NOLOCK)
ON T.ProductID = P.ProductID
JOIN dbo.cars C WITH (NOLOCK) ON I.ModelID = C.ModelID
JOIN dbo.carmakes CM WITH (NOLOCK) ON CM.MakeID = C.MakeID
JOIN dbo.CarDealerMakes CDM WITH (NOLOCK)
ON CM.MakeID = CDM.MakeID
WHERE T.ProductID NOT IN (
SELECT distinct A.ProductID
FROM dbo.Action A WITH (NOLOCK)
JOIN dbo.ActionPurchases AP WITH (NOLOCK)
ON A.ActionID = AP.ActionID
WHERE A.CustomerID = 2
UNION
SELECT distinct A.ProductID
FROM dbo.Action A WITH (NOLOCK)
JOIN dbo.ActionServices S WITH (NOLOCK)
ON A.ActionID = S.ActionID
WHERE 2 = A.ProductID)
That sql will run on windows 2000 but it will not run on windows 2003.
I have the latest service pack.
Has anyone ever come across this before or have and suggestions ?
Strange In Query
Jul 9, 2005I have a query as follow:
SELECT @resRate = (SELECT resRate FROM ProjectAssign WHERE proNo = (SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee) ) )
the definition of table Timer_cust contains refNum(int), projNo(varchar) and projName(varchar).Timer_cust table doesn't contain column username. So this query shoud generate a runtime error. however it works fine without error.But if I run SELECT projNo FROM Timer_Cust WHERE refNum = @actProjNo AND username= (SELECT username FROM Timer_Emp WHERE refNum = @actEmployee)A runtime error message appears.Why?
Strange Indexes
Aug 13, 2001Can any one tell me why sp_helpindex shows several indexes though there is only one index on the table. When i use Enterprise manager it shows only one index..Any idea..is it a bug ..do I need to apply latest service pack ?
Here is the output shows
IX_tbl_ncf_bo
_WA_Sys_Deal_No_2902ECC1
_WA_Sys_fwddate_2902ECC1
_WA_Sys_deal_type_2902ECC1
_WA_Sys_RegionID_2902ECC1
_WA_Sys_CompID_2902ECC1
_WA_Sys_To_Include_2902ECC1
_WA_Sys_SvcChoice_2902ECC1
_WA_Sys_UtilityID_2902ECC1
First one is actual index that I created, remaining
Strange!any Explanations????
Jul 31, 2000i have four separate jobs which run at scheduled time daily..out of which one job has run properly and the other three have not run at all(there is no details of it in "View job history")for only one day in between..again from the next day all the four jobs are running properly.what could be the reason for the three jobs not running on a particular day?(The jobs were scheduled between 3 and 4am in the morning..so nobody would be using the system at that time and the system was definitely up at that time as that one job has run)
i could afford to have such strange behaviour in future as the jobs are important and should run daily.any ideas by which i could make sure all four jobs run daily?
Strange Indexes.
Feb 6, 2001We've been finding some strange indexes in our SQL 7 database. They are not indexes we put in, but seem to be system generated. They always have the format "hind_" and then a series of numbers and underscores. Most of the time they replicate indexes we already had in place. The strangest part is that in some cases they seem to be generating multiple clustered indexes on the same table. A previous question recieved an answer saying that they were statistical indexes. Could someone shed a little more light on what these are, where they came from, and how I can prevent them from coming back? Our queries usually take much longer on tables with these "rogue" indexes on them. Thanks.
View 1 Replies View RelatedStrange Len Function
Mar 13, 2003Why is it so?
select len("Test")
--returns 4
select len("Test ")
--returns 4
select len(" Test ")
--returns 7
why not all 4 ?
why not 4,11,14?
Strange Behavior
Nov 29, 2005I have a SP that usually works fine (0-16 CPU time, 40 ms Duration), but from time to time the server hangs with apparently no reason. The SP has a lock timeout set to 500, so it should abort if a lock timeout error (1222) occurs but it doesn't. The Profiler reports very long execution time (over 30 sec), and because of that all other SP calls are blocked, 'cause the transaction opened by the first sp execution is not finished yet.
Any other attempts to identify other blocking queries did not show me anything suspect (sp_lock, dbcc opentran) other then the usual blocked chain. I'm starting to think about an IO bottleneck, or IO failure, that could block the disk access and cause the delay. The status of RAID 5 is healthy.
The server is used as storage system for a website (approx. 2000 concurrent users), and occasionally I noticed an ASP queue, but this strange behavior occurs even during the peak-off hours.
Any thoughts ?
-----
HP Server - 2 CPU @ 3,4 ; 4 GB RAM; SCSI - RAID 5
Windows 2000 Advanced Server - SQL Server 2000 SP4
Strange Table
Apr 24, 2006I have a table. It shows "Rows: 2" when I open it in the table properties dialog. But there is no record in the table when I open it from Open Table -> Return All Rows.
I don't understand how this can happen. Any help is appreciated.
Thanks.
Strange Error
Nov 19, 2006Hello
I have one PC with SQL server 2000 and I am working on one database called TaxReg but today I found it gray and (suspect) beside it
could you please tell what is the problem and how to fix it ?
It's Really A Strange World Over In....
Jul 16, 2007...the Access forum...so many bad practices
Like this one
http://www.dbforums.com/showthread.php?p=6284279&posted=1#post6284279
Strange Results Using IN
Mar 2, 2004I received some strange results after typing the wrong column in a subselect using IN. I've been puzzling over it a while now and can't quite figure out why it is doing what it is.
Here's an example of what is happening.
use northwind
go
select * from Customers where CustomerID in
( select CustomerID from Employees where 1 = 0 )
Now, there is no customerid on the Employees table, so running the subquery alone will produce an error. However when the full query above is run, all rows in the customer table are returned.
It was my understanding that the inner querry is evaluated first, and the results used by the outer query. I'm having a hard time seeing how this query is going anywhere.
Any ideas?
A Very Strange Problem
Mar 24, 2004I have a simple query which ran fine for the last 12 months. All of sudden, it's dragging and couldn't finish in 6 hours. I tried to trace down where the problem resided but it's such a simple query there is nothing to break down. By chance, I commented out all the column names and replace with ' SELECT * ', the query finished in 14 seconds. Once I replace the * with column names, it ran over 20 minutes and I had to cancel it because it doesn't seem to be returning any results. Any help would be appreciated. Thanks.
View 11 Replies View RelatedStrange Problem In AS - Please Help
Apr 20, 2004Hi,
When I use only 2 dimensions linked with my fact and process the cube, I get the correct results for my measure (I have checked this will all
possible combinations of the 2 dimensions)....
However when I add more dimensions, link them with the fact, process the cube, and check the same results I get totally different totals for my
measure :confused:
I realize that ideally I should post the DDLs for all dimensions etc.
but to start with can anyone think of what could be causing this.
I'll appreciate your help.
Thanks.
P.S
Exhausted :(