update tblPact_2008_0307 set student_dob = '30/01/1996' where student_rcnumber = 1830when entering update date in format such as ddmmyyyyi know the sql query date format entered should be in mmddyyyy formatis there any way to change the date format entered to ddmmyyyy in sql query?
Advance thanks ....... My table is TimeSheet:----------------------------------- CREATE TABLE [dbo].[TimeSheet]( [autoid] [int] IDENTITY(1,1) NOT NULL, [UserId] [int] NOT NULL, [starttime] [datetime] NOT NULL, [endtime] [datetime] NOT NULL, [summary] [nvarchar](50) NOT NULL, [description] [nvarchar](50) NULL, [dtOfEntry] [datetime] NOT NULL, [Cancelled] [bit] NULL) ON [PRIMARY] My Query is------------------ insert into timesheet (UserId, StartTime,EndTime, Summary, Description,DtOfEntry) values (2, '19/04/2008 2:05:06 PM', '19/04/2008 2:05:06 PM', '66', '6666','19/04/2008 2:05:06 PM')i m not able to insert value Error Message is-------------------------Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated. can any body give any solution
Hey, I have a big problem that i wanna search data from SQL by DateTime like thatselect * from test where recorddate='MyVariableWhichHoldDate'i use variable that holds Date info.i searched a lot infomation on net but there is no perfect solution. i know why this occur but there is no function to solve this problem. i used a lot of ways. it accept yyyy-mm-dd format but my variable format is dd-mm-yyyyy . is there any function for this problem? and any other solution.thanks for ur attentionregards
Hi all,I have a table called PTRANS with few columns (see create script below).I have created a view on top that this table VwTransaction (See below)I can now run this query without a problem:select * from dbo.VwTransactionwhereAssetNumber = '101001' andTransactionDate <= '7/1/2003'But when I create an index on the PTRANS table using the command below:CREATE INDEX IDX_PTRANS_CHL# ON PTRANS(CHL#)The same query that ran fine before, fails with the error:Server: Msg 242, Level 16, State 3, Line 1The conversion of a char data type to a datetime data type resulted inan out-of-range datetime value.I can run the same query by commeting out the AssetNumber clause and itworks fine. I can also run the query commenting out the TransactionDatecolumn and it works fine. But when I have both the conditions in theWHERE clause, it gives me this error. Dropping the index solves theproblem.Can anyone tell me why an index would cause a query to fail?Thanks a lot in advance,AmirCREATE TABLE [PTRANS] ([CHL#] [varchar] (100) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,[CHCENT] [numeric](2, 0) NOT NULL ,[CHYYMM] [numeric](4, 0) NOT NULL ,[CHDAY] [numeric](2, 0) NOT NULL ,[CHTC] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL) ON [PRIMARY]GOCREATE VIEW dbo.vwTransactionsASSELECT CONVERT(datetime, dbo.udf_AddDashes(REPLICATE('0', 2 -LEN(CHCENT)) + CONVERT(varchar, CHCENT) + REPLICATE('0', 4 -LEN(CHYYMM))+ CONVERT(varchar, CHYYMM) + REPLICATE('0', 2 -LEN(CHDAY)) + CONVERT(varchar, CHDAY)), 20) AS TransactionDate,CHL# AS AssetNumber,CHTC AS TransactionCodeFROM dbo.PTRANSWHERE (CHCENT <> 0) AND (CHTC <> 'RA')*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
I have problem to execute query with interval date.
If try this query I don't have problem and the output is correct:
SELECT * FROM dotable WHERE dotableDate BETWEEN CONVERT (datetime, '01/01/2015', 121) AND CONVERT (datetime, '09/01/2015', 121);Instead if try this I have error: SELECT * FROM dotable WHERE dotableDate BETWEEN CONVERT (datetime, '25/01/2015', 121) AND CONVERT (datetime, '28/01/2015', 121);
[Err] 22007 - [SQL Server]The conversion of a varchar data type to a datetime data type resulted in an out-of-range value.
Hi, I have a column of type datetime in sqlserver 2000. Whenever I try to insert the date '31/08/2006 23:28:59' I get the error "...datetime data type resulted in an out-of-range datetime value" I've looked everywhere and I can't solve the problem. Please note, I first got this error from an asp.net page and in order to ensure that it wasn't some problem with culture settings I decided to run the query straight in Sql Query Anaylser. The results were the same. What else could it be? cheers, Ernest
I am using Visual Studio 2005 and SQL Express 2005. The database was converted from MS Access 2003 to SQL Express by using the upsize wizard.
I would like to store the current date & time in a column in a table. This column is a smalldatetime column called 'lastlogin'.
The code I'm using is:
Dim sqlcommand As New SqlCommand _
("UPDATE tableXYZ SET Loggedin = 'True', LastLogin = GetDate() WHERE employeeID = '" & intEmployeeID.ToString & "'", conn)
Try
conn.Open()
sqlcommand.ExecuteNonQuery()
conn.Close()
Catch ex As Exception
MessageBox.Show(ex.Message)
End Try
This code works fine on my local machine and local SQL server. However at the client side this code results in the error as mentioned in the subject of this thread. I first used 'datetime.now' instead of 'getdate()', but that caused the same error. Then I changed the code to 'getdate()', but the error still remains.
The server at the client is running Windows Server 2000 UK . My local machiine is running WIndows XP Dutch.
Maybe the conversion from Dutch to UK has something to do with it. But this should be solved by using the 'Getdate()' function..... ?
hello all .. I have a form that includes two textboxes (Date and Version) .. When I try to insert the record I get the following error message .. seems that something wrong with my coversion (Data type)"The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.The statement has been terminated."
in my SQL database I have the date feild as datetime and the version as nvarchar(max) this is the code in the vb page .. Can you please tell me how to solve this problem?Imports System.Data.SqlClient Imports system.web.configuration
Partial Class Admin_emag_insert Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Record_DateTextBox.Text = DateTime.Now
End Sub
Protected Sub clearButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles clearButton.Click Me.VersionTextBox.Text = "" End Sub
Protected Sub addButton_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles addButton.Click Dim objConnection As SqlConnection Dim objDataCommand As SqlCommand Dim ConnectionString As String Dim record_date As Date Dim version As String Dim emagSQL As String
'save form values in variables record_date = Record_DateTextBox.Text version = VersionTextBox.Text
'Create and open the connection objConnection = New SqlConnection(ConnectionString) objConnection.Open() emagSQL = "Insert into E_Magazine (Record_Date, Version ) " & _ "values('" & record_date & "','" & version & "')"
'Create and execute the command objDataCommand = New SqlCommand(emagSQL, objConnection) objDataCommand.ExecuteNonQuery() objConnection.Close()
AddMessage.Text = "A new emagazine was added successfully"
Hi, I've written this code multiple times now. But for the first time i get an error at the line underlined. My procedure runs perfectly when i execute it through Sql Query analyzer. plzz help.. Its urgent and am unable to find the reason for this error "A first chance exception of type 'System.Data.SqlClient.SqlException' occurred in system.data.dll" Thanks !SqlConnection conn = new SqlConnection(DbConnectionString); conn.Open(); SqlCommand cmd = conn.CreateCommand(); cmd.CommandText = "dbo.rqryTradesPRR"; cmd.Parameters.Add("@COBDate",SqlDbType.DateTime).Value = "2002-10-31 00:00:00.000" ; SqlDataReader reader = cmd.ExecuteReader(); while(reader.Read()) { // have written something here
I am using a stored procedure which returns a value of charecter datatype 'V' to the calling program.I am getting an sql exception System.Data.SqlClient.SqlException: Syntax error converting the varchar value 'V' to a column of data type inti didnot define any int datatype in my tablethis is my codeSqlCommand com = new SqlCommand("StoredProcedure4", connection);com.CommandType = CommandType.StoredProcedure; SqlParameter p1 = com.Parameters.Add("@uname", SqlDbType.NVarChar);SqlParameter p2 = com.Parameters.Add("@opwd", SqlDbType.NVarChar);SqlParameter p3 = com.Parameters.Add("@role", SqlDbType.NVarChar);p3.Direction = ParameterDirection.ReturnValue;p1.Value = username.Text.Trim();p2.Value = password.Text.Trim();com.ExecuteReader();lblerror2.Text = (string)(com.Parameters["@role"].Value); can your figure out what is the error ? Is it a coding error or error of the databse
A SQL table has a field named "pay-day" with Char(8) data type.
I tried to change its data type to datetime but only with an error message like this. I did right-click the table and tried to modify a data type.
- Unable to modify table. The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value. The statement has been terminated.
I am stuck with a SSIS package and I can€™t work out. Let me know what steps are the correct in order to solve this. At first I have just a Flat File Source and then Script Component, nothing else.
Error:
[Script Component [516]] Error: System.InvalidCastException: Unable to cast COM object of type 'System.__ComObject' to class type 'System.Data.SqlClient.SqlConnection'. Instances of types that represent COM components cannot be cast to types that do not represent COM components; however they can be cast to interfaces as long as the underlying COM component supports QueryInterface calls for the IID of the interface. at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper90 wrapper, Object transaction)
Script Code (from Script Component):
' Microsoft SQL Server Integration Services user script component ' This is your new script component in Microsoft Visual Basic .NET ' ScriptMain is the entrypoint class for script components
Imports System Imports System.Data.SqlClient Imports System.Math Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Public Class ScriptMain Inherits UserComponent
Dim nDTS As IDTSConnectionManager90 Dim sqlConnecta As SqlConnection Dim sqlComm As SqlCommand Dim sqlParam As SqlParameter
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
Dim valorColumna As String Dim valorColumna10 As Double
valorColumna = Row.Column9.Substring(1, 1)
If valorColumna = "N" Then valorColumna10 = -1 * CDbl(Row.Column10 / 100) Else valorColumna10 = CDbl(Row.Column10 / 100) End If
I have created a windows library control that accesses a local sql database
I tried the following strings for connecting
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Trusted_Connection = true"
Dim connectionString As String = "Data Source=localhostSQLEXPRESS;Initial Catalog=TimeSheet;Integrated Security=SSPI"
I am not running the webpage in a virtual directory but in
C:Inetpubwwwrootusercontrol
and I have a simple index.html that tries to read from an sql db but throws
the error
System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.PermissionSet.Demand() at System.Data.Common.DbConnectionOptions.DemandPermission() at System.Data.SqlClient.SqlConnection.PermissionDemand() at System.Data.SqlClient.SqlConnectionFactory.PermissionDemand(DbConnection outerConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection,
etc etc
The action that failed was: Demand The type of the first permission that failed was: System.Data.SqlClient.SqlClientPermission The Zone of the assembly that failed was: Trusted
I looked into the .net config utility but it says unrestricted and I tried adding it to the trusted internet zones in ie options security
I think that a windows form connecting to a sql database running in a webpage should be simple
I am using SQL Server 2000. I have created a Store Procedure to insert information, 4 of the fields are date types. I am using OleDb Data Provider (System.Data.OleDb) namespace.
The dates are filled by a form (web form) on submit event, I created a class that has functions to create my OleDb Parameters. I add the parameters to the command and execute it through a SQL Server Stored Procedure. In the event that I must have coded something wrong, I tested in the SQL Query Analyzer and the IN parameters for the date I used the getDate() method. This is where I know it is OleDb and SQL Server Parameters.
What Converstion Format should I use in the SP for the date? OleDb.date are doubles from some date in 1979 or something or another. So I used an OleDbDataType.DBDate. It seems that when the Stored Procedure uses the IN Parameters dates provided by OleDbDataType.Date or DBDate, that it doesn't like the int format. I am guessing that I am not converting the date in the parameters in the Insert of the Store Procedure... this is basically what I have...
Function to add parameters and execute SP
private int _startdate = DateTime.Now; private int _finishdate = DateTime.Now.AddDays(30);
CREATE PROCEDURE myInsert @StartDate datetime, @FinishDate datetime AS
INSERT INTO myTable (STARTDATE, FINISHDATE) VALUES (Convert(datetime, @StartDate), Convert(datetime, @FinishDate))
Please keep in mind that I am using System.Data.OleDb namespace..... please don't tell me to use SQLClient, it seems since I've been so adaptive of using OleDb, that it sould work just as well. I am way too far into this to change my Provider to SQL Client, but I promise myself that the next project (if using SQL Server, I will be using SQLClient and I will keep using OleDb for Oracle.) *sigh*
conn.Open(); . Everything works fine when I run it from my computer. When I try to run it from a network share I get the following error,
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I am using Visual Studio 2005 and .Net framwork v2.0.50727.
Hey im trying to store a category name and the date into a database. For some reason i keep getting this error Implicit conversion from data type datetime to int is not allowed. Use the CONVERT function to run this query. This error is the error im getting back from the database. the datetime field in the database is a datatype (DateTime) so what exactly is going on ?protected void InsertNewCat_Click(object sender, EventArgs e) { string insertSql = "INSERT into Category (CategoryName,Date) VALUES (@Category, @Date)"; string conString = WebConfigurationManager.ConnectionStrings["ProCo"].ConnectionString; SqlConnection con = new SqlConnection(conString); SqlCommand cmd = new SqlCommand(insertSql, con); cmd.Parameters.AddWithValue("@Category", NewCat.Text); cmd.Parameters.AddWithValue("@Date",DateTime.Now);
im trying to convert char (18) data type to decimal (18,6) but it wont let me do it. It gives an arithematic error. what would be other way to solve this problem. Can i do it with float if yes how so? or any other suggested way. Thanks
Dear all, I'm using sqldatareader to return data that i need and then bind it to the gridview. Anyway, I'm facing the above error message. Please help, thanks. Levine
I am trying to bind the data to a list box....i am using a stored procedure instead of a select query. Unfortunately the error is throwing up. Correct me where iam going wrong. Is my syntax correct SqlConnection cn = new SqlConnection("User id=******;password=******;database=sampleecsphase2test;Data source=primasqltst\qa"); cn.Open();SqlCommand cmd = new SqlCommand(); cmd.CommandType = CommandType.StoredProcedure;SqlDataReader dr = new SqlDataReader(); dr = cmd.ExecuteReader(); listBox1.DataSource = dr;
Sub Page_Init(sender As Object, e As EventArgs) Dim txtName As New TextBox() Dim txtPart As New TextBox() Dim txtEach As New TextBox() Dim txtTotal1 As New TextBox() Dim txtSubtotal As New TextBox() Dim txtTax As New TextBox() Dim txtShipping As New TextBox() Dim txtTotal2 As New TextBox()
Dim prod_id As Integer Dim id As Integer id = Request.Querystring("prod_id") txtName.Text = GetName(id).................this is the problem line
I have created a web part in ASP.Net. this web part is extracting data from the sql server database and displaying it on the web part page. This web part is working fine with asp.net application, but when i deploy it with MOSS. it is reaising security exception error like.
Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.
I have made the entry under the safe control list of web.config file. but still i am getting error any suggestion wud be highly appreciable..
Hi, I got this field (dateSubmitted) having a data type of DateTime but I receive this error "Unable to cast object of type 'System.DateTime' to type 'System.String'." All value for dateSubmitted field are 12/27/2007 12:00:00 AM. cheers,imperialx
I am new to ASP.NET and trying to learn. I am getting the problem when I try to insert data into SQL. The exception that I am getting is
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
My table name is 'Customers' and its as below. ----------------------------------------------------------------------- CustomerID--numeric---Identity Seed is 1000---Identity Increment is 1---No Nulls. Name--------varchar---No Nulls. address------Varchar---No Nulls. State--------Varchar---No Nulls. Zip-----------VarcHar---No Nulls. PhoneNumber-Varchar---No Nulls. Email---------Varchar---No Nulls.
and my code is (No fun of my code please--I am a learner) -----------------------------------------------------------------------
Imports System.Data
Imports System.Data.SqlClient
Public Class register
Inherits System.Web.UI.Page
Protected WithEvents cnNWind As SqlConnection
'Protected drCustomers As SqlDataReader
Protected WithEvents lbladd As System.Web.UI.WebControls.Label
Protected WithEvents lblState As System.Web.UI.WebControls.Label
Protected WithEvents lblcity As System.Web.UI.WebControls.Label
Protected WithEvents lblzip As System.Web.UI.WebControls.Label
Protected WithEvents lblPhone As System.Web.UI.WebControls.Label
Protected WithEvents lblEmail As System.Web.UI.WebControls.Label
Protected WithEvents TxtName As System.Web.UI.WebControls.TextBox
Protected WithEvents txtAdd As System.Web.UI.WebControls.TextBox
Protected WithEvents txtState As System.Web.UI.WebControls.TextBox
Protected WithEvents txtCity As System.Web.UI.WebControls.TextBox
Protected WithEvents txtZip As System.Web.UI.WebControls.TextBox
Protected WithEvents txtPhone As System.Web.UI.WebControls.TextBox
Protected WithEvents TxtEmail As System.Web.UI.WebControls.TextBox
Protected WithEvents BtnSubmit As System.Web.UI.WebControls.Button
Protected WithEvents Label1 As System.Web.UI.WebControls.Label
#Region " Web Form Designer Generated Code "
'This call is required by the Web Form Designer.
<System.Diagnostics.DebuggerStepThrough()> Private Sub InitializeComponent()
End Sub
Private Sub Page_Init(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Init
'CODEGEN: This method call is required by the Web Form Designer
'Do not modify it using the code editor.
InitializeComponent()
End Sub
#End Region
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
'Put user code to initialize the page here
End Sub
Private Sub BtnSubmit_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles BtnSubmit.Click
Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('',' " & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind)
cmCustomers.ExecuteNonQuery()
cmCustomers.ExecuteNonQuery()
cnNWind.Close()
End If
End Sub
End Class
The Error I am getting: ----------------------------------------------------------------------- Server Error in '/SCart' Application. --------------------------------------------------------------------------------
An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.
Source Error:
Line 46: If cnNWind.State = ConnectionState.Open Then Line 47: Dim cmCustomers As New SqlCommand("INSERT INTO Customers VALUES ('','" & TxtName.Text & "','" & txtAdd.Text & "','" & txtState.Text & "','" & txtZip.Text & "','" & txtPhone.Text & "','" & TxtEmail.Text & "')", cnNWind) Line 48: cmCustomers.ExecuteNonQuery() Line 49: cnNWind.Close() Line 50: End If
[SqlException: An explicit value for the identity column in table 'Customers' can only be specified when a column list is used and IDENTITY_INSERT is ON.] System.Data.SqlClient.SqlCommand.ExecuteNonQuery() SCart.register.BtnSubmit_Click(Object sender, EventArgs e) in d:inetpubwwwrootSCart egister.aspx.vb:48 System.Web.UI.WebControls.Button.OnClick(EventArgs e) System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) System.Web.UI.Page.ProcessRequestMain()
-------------------------------------------------------------------------------- Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
The code works fine If I Dont use Identity Column, But I need to use Identity Column in my Project :( ...Please Help.
when i m using datetime data type of sqlserver it will never except date before 1853 how can i solve this bcoz user may enter this date when using ..how an i put constrating on it
Hi all!!I'm developing a project using VS 2005 (C# code) and SQL Server 2005.I have some problems with the data type 'DateTime'.In some parts of my project, I have used DataSets and DataAdapters and I can insert in a dataRow a data type 'DateTime' and it is inserted as dd/mm/yyyy hh:mm:ss. That's OK.But in other parts I'm not using Datatables and DataAdapters and I insert new rows in the database using ExecuteNonQuery, but the data type 'DateTime' in the format dd/mm/yyyy hh:mm:ss is not valid. It only allows formats like mm/dd/yyyy hh:mm:ss, but I want the other format.Why is dd/mm/yyyy hh:mm:ss working with DataAdapters? Why is dd/mm/yyyy hh:mm:ss not working with ExecuteNonQuery? Is there any way to specify in the Database that I want the format dd/mm/yyyy hh:mm:ss??Thanks in advance folks,Javier.
The SQL will take date from 01/01/1753 to 01/01/9999 for a datetime data type. Now I have some record date back to 06/09/1686. What I should do? Declare that field as string or some other way can do it. Thanks so much for any help. Helen
I have a datetime data_type column in a table and when i push data ( which is just date there is no time in it.) through a perl script into ms sql 2005 i see date and time in ms sql. were in the time is 00.00.00.000 some thing. What if i dont want the time stuff in that column. What should i do to remove that stuff just keep the date part. Thanks