I have a script that I use after some amount of data massaging (not shown). I would like to be able to change the
1) denominator value (the value 8 in line 32 of my code) based on how many columns are selected by the where clause:
where left(CapNumber,charindex('_', CapNumber)-1) = 1where capNumber is a value like [1_1], [1_4], [1_6]...[1_9] capNumber can be any values from [1_1]...[14_10] depending upon the specialty value (example: Allergy) and the final number after the equal sign is a number from 1 to 14)
2) I'd like to dynamically determine the series depending upon which values correspond to the specialty and run for each where: left(CapNumber,charindex('_', CapNumber)-1) = n. n is a number between 1 and 14.
3) finally I'd like to dynamically determine the columns in line 31 (4th line from the bottom)
If I do it by hand it's 23 * 14 separate runs to get separate results for each CapNumber series within specialty. The capNumber series is like [1_1], [1_2], [1_3],[1_4], [1_5], [1_6], [1_7], [1_8],[1_9] ... [8_4],[8_7] ... [14_1], [14_2],...[14_10] etc.
Again, the series are usually discontinuous and specific to each specialty.
Here's the portion of the script (it's at the end) that I'm talking about:
--change values in square brackets below for each specialty as needed and change the denom number in the very last query.
if object_id('tempdb..#tempAllergy') is not null drop table #tempAllergy select * into #tempAllergy from dbo.#temp2 T
[Code] ....
If I were to do it manually I'd uncomment each series line in turn and comment the one I just ran.
;WITH ctePreAgg AS ( select top 500 act_reference "ActivityRef", row_number() over (partition by act_reference order by act_reference) as rowno, t3.s_initials "Initials" from mytablestuff order by act_reference
[code]...
But what I would love to do next is take each of the above rows - and return the initials either in one column with all the nulls and duplicate values removed, separated by a comma ..
OR the above but using variable number of columns based on the maximum number of different initials for each row.this is not strictly required, but maybe neater for further work on the view
Basically, I'm given a daily schedule on two separate rows for shift 1 and shift 2 for the same employee, I'm trying to align both shifts in one row as shown below in 'My desired results' section.
Sample Data:
;WITH SampleData ([ColumnA], [ColumnB], [ColumnC], [ColumnD]) AS ( SELECT 5060,'04/30/2015','05:30', '08:30' UNION ALL SELECT 5060, '04/30/2015','13:30', '15:30' UNION ALL SELECT 5060,'05/02/2015','05:30', '08:30' UNION ALL SELECT 5060, '05/02/2015','13:30', '15:30'
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501 SELECT 1,2,3,4,'CurrentSetting' FROM TableA ta WHERE tblid = @tblid UNION SELECT 1,2,3,4,'PreviosSetting' FROM Tableb tb WHERE tblid = @tblid
I work with SQLite and need to write a query the old school way to convert rows to columns. If it was MS SQL I would use pivot to get the expected result. However this is SQLite I cannot use pivot.
Sample data:
create table t1 (id int, Dept char (1), Total int); insert t1 select 1, 'A', 100 union select 2, 'B', 120 union select 3, 'C', 140 union select 4, 'D', 150;
How do I use LEFT OUTER JOIN to produce result similar to the below?
I am fairly new to SQL and writing queries so bear with my faults. I am learning on the job, which is good and bad. Below is a query that I have written to obtain some information. The problem arises when we have a patient who goes from Patient Type '1' to Patient Type '2'. This needs to be considered a singular visit and the only way I can think that this may work is if: for any specific medical record a dsch_ts is equal to the Admit TS on the next row.
How to complete something like this and my google searches have been fruitless. I attached a spreadsheet with an example of what I am getting.
SELECT DISTINCT TPM300_PAT_VISIT.med_rec_no, TSM040_PERSON_HDR.lst_nm AS 'Last Name', TSM040_PERSON_HDR.fst_nm AS 'First Name',
I have a column containing values for different languages. I want to cut out the values per languate in a seperat column.
The syntax is a 2 letter country code followed by : the value is contained in double quotes. each languate is separated by a ; (except for the last one)
EX ur English, Dutch and Swedish:US:"Project/Prescription sale";NL:"Project/specificatie";SW:"Objektsförsäljning"
The result would Be column header US with value Project/Prescription sale
next column header NL with value Project/specificatie etc.
Here are table examples:
IF OBJECT_ID('[#SALETYPE]','U') IS NOT NULL DROP TABLE [#SALETYPE]
CREATE TABLE [#SALETYPE]( [SaleType_Id] [int] NOT NULL, [name] [nvarchar](239) NOT NULL,
I have 5 columns in my database. 1 column is coming like a dynamic.
I want to convert records from rows to columns. Currently I have a data like this.
Race AgeRange Amount
W 17-20 500 W 21-30 400 W 31-40 200 A 17-20 100 H 41-50 250 H 51-60 290
So age range is not fixed and it can be any and I have one separate relational table for age range where it's coming from. Now I want to convert it into columns like
I've a table that stores operationcode for each jobnumber. The jobnumber can have multiple operationcode. From the below DDL, I need to show all the jobs that have operation codes as 2001 and 2002. In the below DDL Jobnumber 80011 has both the operation codes 2001 and 2002 so this job will display on the report.
On the other hand Job 80021 only has operationcode 2001 and I do not want this job to show up on the report.
I need to show all the operationcodes for a job if it has operationcode 2001 and 2002.
USE tempdb; GO DECLARE @TEST_DATA TABLE ( DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED , OperationCodeVARCHAR(10) NOT NULL , EmployeeCode VARCHAR(10) NOT NULL
I have three columns in my table with the following datatypes:
Date - DateTime Height - Decimal Change_From_last_Height - Decimal
I am using "SQL Server 2005 Express Edition". I'm fairly new to SQL and would greatly appreciate any help or advice I can get.
The "date" column increases by an extra day in every new row and I then enter the new height of the plant. What I want to know is how I can get SQL server express to automatically enter the difference in height between the current row's height and that of the previous row.
Is it possible to automate the entry in the Change_From_Last_Height column in SQL?
Put another way, I know how to find the difference between two values in the same row but different columns, but how do I calculate the difference between values in adjacent Rows (ie. Rows next to each other)?
How to include row values as columns in my select query. I have a table that stores comments for different sections in a web application. In the table below, I would like display each comment as a new column. I only want one row for each record_ID.
Existing table layout
table name - tblcomments Record_ID Comment_Section_ID Comment 1 5 Test 5 comment 1 7 Test 7 comment 2 5 New comment 2 7 Old comment 3 5 Stop 3 7 Go
Desired table layout table name - #tempComment Record_ID Comment_Section_5 Comment_Section_7 1 Test 5 comment Test 7 comment 2 New comment old comment 3 Stop Go
Once I figure out how to get the data in the layout above, I will need to join the table with my record table.
table name - tblRecord Record_ID Record_Type_ID Record_Status 1 23 Closed 2 56 Open 3 67 Open 4 09 Closed 5 43 In progress
I would like to be able to join the tables in the query below for the final output.
Select r.Record_ID, r.Record_Type_ID, r.Record_Status, c.Comment_Section_5, c.Comment_Section_7 from tblRecord r left outer join #tempComment c on r.record_ID = c.record_ID
How I can get the data in the desired #tempComment table layout mentioned above?
SELECT 'Type'[Type] ,CASE WHEN code='09' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='10' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='11' THEN SUM(Amt/100) ELSE 0 END ,CASE WHEN code='12' THEN SUM(Amt/100) ELSE 0 END FROM Table1 WHERE (Code BETWEEN '09' AND '12') GROUP BY Code
and the output
Column 1 Column 2 Column 3 Column 4 Type 14022731.60 0.00 0.00 0.00 Type 0.00 4749072.19 0.00 0.00 Type 0.00 0.00 149214.04 0.00 Type 0.00 0.00 0.00 792210.10
How can I modify the query to come up with output below,
I am working on a rewards program and I have a table whenever customer completes a trip, his total fare,business points earned for that particular trip and respective Promotional points gets inserted.
Now I have a scenario whenever customer business points accumulates to 10 then need to award 3 promotional points.
If Business Points=14 for a single trip then for the first 10 points respective Promo points will be awarded and the remaining 4 points should get carry forward for the next trip and this 4 points should get accumulated with the next trip Business Points and so on.
Basically need to check for every 10 Business points accumulated award some Promo points and carry forward remaining points.
Here is the sample table structure and data :
CREATE TABLE [dbo].[tblRedeems] ( [Mobileno] [varchar](50) NOT NULL, [TripNo] [int] NOT NULL, [CustomerName] [varchar](50) NULL, [TripEndTime] DATETIME NOT NULL,
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process: 1. get data from an existing view and insert in temptable 2. truncate/delete contents of table1 3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted) 4. insert data in table2 which are not yet present (comparing ID in t2 and temptable) 5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
Hi there,I would like to know how to get rows with duplicate values in certaincolumns. Let's say I have a table called "Songs" with the followingcolumns:artistalbumtitlegenretrackNow I would like to show the duplicate songs to the user. I considersongs that have the same artist and the same title to be the same song.Note: All columns do not have to be the same.How would I accomplish that with SQL in SQL Server?Thanks to everyone reading this. I hope somebody has an answer. I'vealready searched the whole newsgroups, but couldn't find the solution.
I am working on a sql data that has a list of product names, shipment type and the count of shipments. The values are listed as rows in the database. it will be in the below format.I want to transpose only the shipment type and the corresponding count of each product name in the below format.I tried to do this but i am not able to achieve in the correct format.
From the table i want everything highlighted with a *I wanted an SQl expression to look at values in Column 1 (ID), look atthe corresponding values in the second column (F1) and select the rowwith the highest value, and then if there was more than one row forthat ID with the same value in F1, look at column 3 (F2) and selectthe row with the highest value in this column.SQL> select * from test;ID F1 F2---------- ---------- ----------1 12 4* 1 12 61 11 11 9 122 3 5* 2 9 132 9 93 1 23 1 1* 3 7 5I try the followingSQL> select * from test t12 where f1 = (select max(f1) from test t2 where t2.id = t1.id)3 ;And get the followingID F1 F2---------- ---------- ----------1 12 4* 1 12 6* 2 9 132 9 9* 3 7 5If I add another line with an AND statement after line 2 I either getnothing or rubbish as the output.Ideas?Cheers
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
What I want is to divide the row value for 'OB Dial Attempts' by the row value for '# Ready To Work Inventory', both in the same table.The code below will work, however I think there is a flaw in my logic. The actual table only has one row per category (MatrixCat) and will always have only one row per category.
CREATE TABLE #NumVals (MatrixCat VARCHAR(100), MatrixVal VARCHAR(100)); INSERT INTO #NumVals (MatrixCat, MatrixVal) VALUES ('# Ready To Work Inventory','606'), ('OB Dial Attempts','255');
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
Please note that the number columns are different in each table. I wanted to dump the data of Source table to Destination table. I meant to say that the rows of 2 columns in Source table to last 2 rows of Destination table. And also my oreder of the columns in Destination table will vary. So i need to a way to dynamically insert the data in bulk. but i will know the column names for sure before inserting.
Is there anyway to bulk insert into these columns.
I have a small problem with a join clause, because i need to return all values from my table BL:
my code is:
SELECT cast(0 as bit) as 'Escolha',data, contado , ollocal ,origem, ousrdata,ousrhora FROM ( SELECT noconta,banco, u_area FROM BL
[code]....
In fact, i need to return 2 accounts (16,35) - x.NOCONTA IN (16,35), but I know that the problem is on the WHERE clause.How can do that, because i need all the condition on WHERE clause regarding my table OL, but also, i need to return my two accounts (16,35).
