I need to list all students who have both parents phone number is null. The parent relationship values 1 and 2 indicates the person is either Mom (value 2) or dad (value 1) of the student. Note: I am using student parent as an example to write my query.
We have SharePoint list which has, say, two columns. Column A and Column B.
Column A can have three values - red, blue & green.
Column B can have four values - pen, marker, pencil & highlighter.
A typical view of list can be:
Column A - Column B red - pen red - pencil red - highlighter blue - marker blue - pencil green - pen green - highlighter red - pen blue - pencil blue - highlighter blue - pencil
We are looking to create a report from SharePoint List using SSRS which has following view:
red blue green pen 2 0 1 marker 0 1 0 pencil 1 3 0 highlighter 1 1 1
We tried Sum but not able to display in single row.
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.
I am working on some data that is JOINing to another table. Not a big thing. In the child table, there are different values for a single ID. I want to be able to select the Max ColorID that is Not Null, for each distinct CarID. The CarID is what I am joining the other table with. I need selecting the distinct row with the Max ColorID that is not Null. All this data is made up, so nothing looks logical in the design.
DECLARE @ColorList TABLE ( CarID float , ColorID int ) INSERT INTO @ColorList SELECT 1.55948815793043E+15, 9 UNION ALL SELECT 1.55948815793043E+15, 27 UNION ALL
I have two tables, a dates table and a values table. They are joined on the date column.The date table has a range, say from today as far as 20 days from now, incrementing by 1 day each row.The values table may have a row for a day, and may not. If the day has a value I want to display that value.If the day does not have a value in the values table I want to display the last known value.
I think this can be done with windowing functions in a set based manner but have not been able to work it out. I have done it procedurally but im not happy with that at all, and really want to see if this is possible in a set based manner.Below is some simplified code to allow testing with sample data.
create table DimDate ( DateCol date ) create table TotalsData ( DateCol date
We have a database where many tables have a field that has to be lengthened. In some cases this is a primary key or part of a primary key. The table in question is:-
/****** Object: Table [dbo].[DTb_HWSQueueMonthEnd] Script Date: 09/25/2014 14:05:09 ******/ SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO SET ANSI_PADDING ON GO CREATE TABLE [dbo].[DTb_HWSQueueMonthEnd](
[Code] ....
The script I am using is
DECLARE@Column varchar(100)--The name of the column to change DECLARE@size varchar(5)--The new size of the column DECLARE @TSQL varchar(255)--Contains the code to be executed DECLARE @Object varchar(50)--Holds the name of the table DECLARE @dropc varchar(255)-- Drop constraint script
[Code] ....
When I the the script I get the error message Could not create constraint. See previous errors.
Looking at the strings I build
ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] DROP CONSTRAINT PK_DTb_HWSQueueMonthEnd ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] Alter Column [Patient System Number] varchar(10) ALTER TABLE [dbo].[DTb_HWSQueueMonthEnd] ADD CONSTRAINT PK_DTb_HWSQueueMonthEnd PRIMARY KEY NONCLUSTERED ([Patient System Number] ASC,[Episode Number] ASC,[CensusDate] ASC) WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
They all seem fine except the last one which returns the error
Msg 8111, Level 16, State 1, Line 1 Cannot define PRIMARY KEY constraint on nullable column in table 'DTb_HWSQueueMonthEnd'. Msg 1750, Level 16, State 0, Line 1 Could not create constraint. See previous errors.
None of the fields I try to create the key on are nullable.
I use the merge statement in a sproc to insert, update and delete records from a staging table to a production table.
In the long sql, here is a part of it,
When Matched and
((Student.SchoolID <> esis.SchoolID OR Student.GradeLevel <> esis.GradeLevel OR Student.LegalName <> esis.LegalName OR Student.WithdrawDate <> esis.WithdrawDate Student.SPEDFlag <> esis.SPEDFlag OR Student.MailingAddress <> esis.MailingAddress)
Then update
Set Student.Schoolid=esis.schoolid, .....
My question is how about if the column has null values in it.for example
if schoolID is null in production table is null, but in staging table is not null, will the <> return true.or if either side of <> has a null value, will it return true.
I don't want it to omit some records and causing the students records not get updated.If not return true, how to fix this?
I have a table with data in two columns, item and system. I am trying to accomplish is we want to compare if an item exists in 1, 2 or all systems. If it exists, show item under that system's column, and display NULL in the other columns.
I have aSQL Fiddle that will allow you to visualize the schema.
The closest I've come to solving this is a SQL pivot, however, this is dependent on me knowing the name of the items, which I won't in a real life scenario.
select [system 1], [system 2], [system 3] from ( SELECT distinct system, item FROM test where item = 'item 1' ) x pivot ( max(item)
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
I have to populate a table of exchange rates which is easy enough however because rates are held on Fridays but I need to make calculations on weekends or holidays I need to populate the Friday rate on non weekends and holidays. I have a sample table below with null values on the weekends for the last 90 days but need a script that will show the Friday exchange rate on Saturday and Sunday
Here was my latest attempt
;with cte as ( select currxdate, [from], [TO], CurrXRate from dbo.CurrXchange ) select a.CurrXDate, a.[From],a.[To] , isnull(a.CurrXRate, b.currxrate) as 'CurrXRate'
Now for columns Week1 to week3 if value is 0 then i want to display by searching next week value, if it is also 0 then go for next week and if value found there then display instead of zero. so my output would be as below instead of above.
The 2 digit number that appears on line 1, 7 and 13 (only in this example) i need to have added to the begin of each value below it until the next 2 digit number is encountered. The desired result set would look like:
I'm trying to divide two values from separate rows. Each row is a separate UNION statement.
2014-08-03 00:00:00.000NKBB (N) - Total Offers 1218 UNION (A) 2014-08-03 00:00:00.000NKBB (N) - With Lead 301 UNION (B) 2014-08-03 00:00:00.000NKBB (N) - Without Leads 917 UNION (C)
In the below example, I would like to divide KBB (N) - With Lead (UNION (B)/KBB (N) - Total Offers UNION (A)
I have a column with the following information in it. I need to split the column and parse the values. I have Parsed one single values from but, not multiple times.
I am working with a table that has a column which stores multiple data/values that are comma separated.
I need to be able to query that table and get those rows where the values in that column match a pre-defined search list.
I was thinking of somehow trying to take the search list and convert it to a table(temp or a cte) and then JOIN to the table.
however, since the column may contain multiple values, i would need to parse/separate that first. I am not sure how to parse and then join to a list (if that is even the best way to solve this) to only get the rows where the search column contains one or more of the items we're looking for.
Below is some sample data:
Declare @BaseTable table (PKCol int, Column2Search varchar(2000)) Insert into @BaseTable (PKCol, Column2Search) Select 1001, 'apple,orange,grapefruit' UNION ALL Select 1002, 'grapefruit,coconut' UNION ALL
I have a table with a column AttributeNumber and a column AttributeValue. The data is like this:
OrderNo. AttributeNumber AttributeValue 1.-Order_1 2001 A 2.-Order_1 2002 B 3.-Order_1 2003 C 4.-Order_2 2001 A 5.-Order_2 2002 B 6.-Order_2 2003 C
So the logic is as follows:
I need to display in my query the values are coming from Order_1, means AttributreValues coming from AttibuteNumbers: 2001,2002,2003...and Order_2 the same thing.
Not sure how to create my Select here since the values are in the same table
I use a Flat File Connection Manager for a file with 18 columns.
My column delimiter is the "~" caracter and my row delimiter is "{CR}{LF}"
The source files contains about 2300 lines. None of them contain NULL values.
My last row is a numeric(16,2). Even if it is not the appropriate type for the value I want extract, it works with all my columns.
My problem is with the last column. I have read the SQL Server 2005 interpretation of the row delimiter as actually the last row column delimiter.
But, here, my values are OK and put in the destination table if it is not 0 : "+0000000001352" for example in the file.
If it is 0 : "+00000000000000", and if I considered errors as INGORE FAILURE and put data in the destination table, accepting NULL values, I have NULL values in table for these 0 values. And correct values for non-0 values.
How do you explain that ? How I can fix the problem and correctly read my file ?
For your information, if I REDIRECT ROW in the Flat File Error Output, the ErrorCode is : -1071607676 and ErrorDescription is "The data value cannot be converted for reasons other than sign mismatch or data overflow."
I use a Flat File Connection Manager for a file with 18 columns.
My column delimiter is the "~" caracter and my row delimiter is "{CR}{LF}"
The source files contains about 2300 lines. None of them contain NULL values.
My last row is a numeric(16,2). Even if it is not the appropriate type for the value I want extract, it works with all my columns.
My problem is with the last column. I have read the SQL Server 2005 interpretation of the row delimiter as actually the last row column delimiter.
But, here, my values are OK and put in the destination table if it is not 0 : "+0000000001352" for example in the file.
If it is 0 : "+00000000000000", and if I considered errors as INGORE FAILURE and put data in the destination table, accepting NULL values, I have NULL values in table for these 0 values. And correct values for non-0 values.
How do you explain that ? How I can fix the problem and correctly read my file ?
For your information, if I REDIRECT ROW in the Flat File Error Output, the ErrorCode is : -1071607676 and ErrorDescription is "The data value cannot be converted for reasons other than sign mismatch or data overflow."
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
in my table i ve the column of item code which contains '1000' ,'2000' ,'3000' series i jus wanna display the output of item codes '1000','2000'series and some of ('3000019','3000020','3000077','3000078').
i tried in my join query
these code left(itemcode,4) in ('1000','2000') or itemcode in ('3000019','3000020','3000077','3000078')
Using c# in the compact framework, is there a way to do a parameterized query for counting the number of records where a specified column is null. I tried all of these, but none of them work:
cmd.Add(new SqlCeParameter("@IntColumn", SqlInt32.Null)); cmd.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
cmd.CommandText = "select count(*) from TableName where not IntColumn = @IntColumn";
cmd.Parameters.Add(new SqlCeParameter("@IntColumn", SqlDbType.Int32)); cmd.Parameters["@IntColumn"].Value = SqlInt32.Null; cmdGetNumRead.CommandText = "select count(*) from TableName where IntColumn is not @IntColumn";
So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
