select DateAdd(dd,-90,getdate())
It gives the 90 days older date but i want to exclude the weekdays and holidays (saturday ,sunday,holiday)
As we dont have permission to call a function or Sp in high level environments looking for a simple query .
Does anyone know of a way to calculate the date 'x' number of business days after another date?
View 2 Replies View RelatedI have a date that I need to add 'n' number of business days to. I have a calendar table that has a 'IsBusinessDay' flag, so it would be good if I was able to use this to get what I need. I've tried to use the 'LEAD' function in the following way;
SELECT A. Date, B.DatePlus3BusinessDays
FROM TableA A
LEFT JOIN (Select DateKey, LEAD(DateKey,3) OVER (ORDER BY datekey) AS DatePlus3BusinessDays FROM Calendar WHERE IsBusinessDay = 1) B ON A.DateKey = B.DateKey
Problem with this is that because I am filtering the Calendar for business days only, when there is a date that is not a business day in TableA, a NULL is being returned.
Is there any way to do a conditional LEAD, so it skips rows that are not business days? Or do I have do go with a completely different approach?
I have a calendar table against entire year 2015 with each day with 2 flag,
1. WK_DT_IN == except Satarday and Sunday, value is "Y", for Sat/Sun, value is "N"
2. HOL_DT_IN == value will only be "Y" only for holiday, example for '2015-01-01' date, it's value is "Y"
DECLARE @CAL TABLE (CAL_DT DATE, WK_DT_IN CHAR(1), HOL_DT_IN CHAR(1))
INSERT INTO @CAL VALUES ('2015-01-01', 'Y', 'Y'), ('2015-01-02', 'Y', 'N'),('2015-01-03', 'N', 'N'),
('2015-01-04', 'N', 'N'), ('2015-01-05', 'Y', 'N'), ('2015-01-06', 'Y', 'N'), ('2015-01-07', 'Y', 'N')
We have a given date, example '2015-01-01', I need to find out a date after 2 business days? I can think of loop, but will it work.
I need to exclude date which having HOL_DT_IN = "Y" and WK_DT_IN = "N".
I created a dbo.Calendar table that stores dates and a work day flag (1=work day, 0=non-work day) so I can use it to calculate the next business date from a date using a function. I'm using a while group to count only the work days and a couple other internal variables but I'm not sure if I can even use them in a function.
Assuming Sats & Suns are all non-work days in April 2014, if my @WorkDays = 10 for 10 work days and my @DateFromValue - 4/1/2014, I would expect my return date to be 4/15/2014.
------ Messages after I click execute on my query window that has my function ------------------------------------------------------
Msg 444, Level 16, State 2, Procedure FGetWorkDate, Line 19
Select statements included within a function cannot return data to a client.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 20
Invalid column name 'WorkDay'.
Msg 207, Level 16, State 1, Procedure FGetWorkDate, Line 22
Invalid column name 'Date'.
------ my function code ----------------------------
CREATE FUNCTION [dbo].[FGetWorkDate](
@WorkDays VARCHAR(5),
@DateFromValue AS DateTime )
RETURNS DATETIME
[Code] ....
--From the rows I want to know how many number of days a person was active for the given date range.
create table [dbo].[personstatus]
(
id int identity(1,1),
name varchar(100),
DateAdded date,
InactivationDate date ) ;
insert into [dbo].[personstatus] values
[Code] ....
--The output I am looking for.
/*
1) FromDt = '2014-01-01' ToDt ='2014-01-30'
KRISS = 7
VDENTI = 7 days
2) FromDt = '2013-01-01' ToDt ='2014-01-01'
KRISS = 1
VDENTI = 1 days
3) FromDt = '2013-01-01' ToDt ='2014-01-01'
KRISS = 0
VDENTI = 1 days
4) FromDt = '2013-01-01' ToDt ='2014-12-31'
KRISS = 8+24+8+21 = 61 Days
VDENTI = 31+24+31+30 = 116 Days
*/
We are running sql 2008 R2. We have the JE_DATE field set up as an int. We are trying to subtract 30 days from this date field.
select * from GENERAL_LEDGER
where JE_DATE >= DATEADD(DAY,-30,GETDATE())
In addition to the where clause above we have also tried
where JE_DATE >= DATEADD(dd,-30,GETDATE())
For both we get the following error "Arithmetic overflow error converting expression to data type datetime."
What would be the most straight forword to Calculate 90 days and 3 Years ago from an Effective Date in a table?
as in
SELECT EffectiveDate
from FL.CEFHistory
I need to return the effective date - 90 days and 1 year from that.
[URL]
Hello ,
I am little confused in writing the exact query i.e filling the correct details in the query .
To simplify let me explain....
I am using the query as
delete MYTABLE
where datediff(dd,loaddate,getdate())>5
I have a table now with loadate column which gets the default date and time . The loadate shows correct date and time when the data was imported in the table .
Now suppose if i want to delete previous 5 days records from today
( for e.g today is 20/08/2002 3:40:00 PM ) ideally it should delete all records which are 5 days older from today . i.e from 20/08/2002 3:40:00 PM to 15/08/2002 3:40:00 PM )
But when i execute the datediff command , it deletes the records previous than 15/08/2002 till 15/08/2002.
The records from 15/08/2002 to 20/08/2002 remain intact .
I am getting some different results .
Am i missing something in the query or i am confused about the calculation of the dates the datediff command performs .
Is the logic correct or i am missing someting important ?
Thanks and Regards
Admin001
What I am trying to do: Obtain attendance percentages for schools for the last five days. The outcome would look like this:
DISTRICTGROUPING, SCHOOLNAME, 5 DAYS AGO PCTG, 4 DAYS AGO PCTG, 3 DAYS AGO PCTG, 2 DAYS AGO PCTG, 1 DAY AGO PCTG
I am using nested subqueries for each day as follows: (total enrollment-total absent/total enrollment)
,(
((SELECTCOUNT(*)--GET TOTAL ENROLLMENT COUNT FOR SPECIFIED DATE
[Code]....
The query works with the following exceptions:
My issues are:
1. Avoid the "division by zero" error. This can occur if a school is closed for a day or if a smaller school has no absences for a day.
2. Avoid weekend dates. I need the query to display only weekdays
3. Currently I am using "PERCENTAGE 5: as a column header whereas I need the actual date as the header.
Hi ,
I have a scheduled job which does an text file import in my database . The data gets appended in my table every day from this import job .
Since my table is growing every day , i want to truncate the table after the data has been collected for three months i.e 90 days . The table will be empty and the new data will flow in through the import .
Any thoughts how to do it through query and schedule it ???
Thanks
Friends -
I am looking for a windows script (bat file) to delete backup files which are older than 2 days.
Please provide scripts on this.
Appreciate your support
Cheers :)
Satish
When running the following SQL statements, I get the same results.Though I need to count only -30 days. Both statements below alsoconsider the time of the day as well, which is not desiredDELETE FROM MNT_RWHERE MNT_R.TIMESTAMP < GETDATE()- 30DELETE FROM MNT_RWHERE MNT_R.TIMESTAMP < DATEADD(d, -30, GETDATE())Here is the format of the values in columnMNT_R.TIMESTAMP2005-08-09 06:06:44.5772005-08-09 06:06:46.8102005-08-09 06:06:49.060So, since data are inserted into the MNT_R table every few seconds, mydelete statement will delete different number of rows, according to thetime of the day it runs.Can you please post a SQL query that will not give me this headache?thanx a lot all
View 2 Replies View RelatedI am using the backup task and backing up a database but want to delete all backup files older than 5 days old. I am using the file task for this and have built the path in a variable but am trying to use a wildcard for the time. I am getting illegal character in path. How can I go about this.
I currently have E:MSSQL.1MSSQLBackupdatabasename_backup_20070309*.bak in my input variable and am trying to delete the file databasename_backup_200703091532.bak
Log file rotation and cleanup script and how to remove the log file older then x days.
View 7 Replies View RelatedI want to delete all backup files from a folder older than a specific date. But if I use the beklow query, I need to pass how many days of older backup files I need to delete whereas in my case, I dont know how many days/month/syears of old backup files are there in the backup folder.
EXEC xp_cmdshell 'FORFILES /p c:BACKUP /s /m *.sql /d -30 /c "CMD /C del /Q /F @FILE"'
I want to delete all files in a given folder that are older than 3 days from today's date.
I tried using a "Foreach Loop container" with a "File System" task inside it but found I couldn't access any file properties such as the file creation date. Am I using the wrong task for this job?
TIA,
Barkingdog
P.S. History of the problem:
I used the sql 2005 Database maintenance program to setup our database backup jobs. One day I noticed that the free space on the drive where we keep the dumps had grown small. I found that we had at least 4 weeks of dumps in there, not the 3 days I wanted to keep! I looked but could not find the "delete file" option in the SSIS package generated by the Database Maintenance Wizard. No wonder the files were piling up.
I would like to generate a working schedule for employees for x-days ahead based on a starting date that the user can enter.
I have got 3 relevant tables:
1. Table X with (1) resourcenumber, (2) starting date working schedule and (3) the daynumber representing the starting date (this is ISO so 1 for Monday, 2 for Tuesday etc.)
2. Table Y has the schedule itself and can hold a 7-days schedule or a 14-days schedule. In case of 7 days schedule there a 14 (!) records with (1) resourcenumber, (2) daynumber, (3) starting hour a.m. (4) ending hour a.m (5) starting hour p.m and (6) ending hour p.m. In case of a 14-days schedule there are 28 records (a.m. and p.m. records)
3. Table Z with resource data.
An example to clarify (for fake employee 100):
Table X:
Resource: 100
Starting date: 2012-03-01 (from this date the schedule will be effective)
Daynumber: 4 (2012-03-01 was a Thursday)
Table Y (Resource has a 14 days schedule because per 2 weeks Monday is an off-day):
Record 1 shows: Resource: 100, Daynumber: 1 (= Monday, working day), AM-Starting hour: 09:00, AM-Ending hour: 13:00, PM-starting hour: 13:30, PM-ending hour: 17:30
Record 2: same but daynumber is 2
Record 3: same but daynumber is 3 etc.
...
Record 8 shows: Resource: 100, Daynumber: 8 (= Monday, off-day), AM-Starting hour: 00:00, AM-Ending hour: 00:00, PM-starting hour: 00:00, PM-ending hour: 00:00
Record 9: same as record 2 but daynumber is 9.
etc.
...
Record 14: same as record 7 but day is 14 (= last day)
The weekend days show as 00:00 for the hours (same as day 8 in example)
I generated the working schedule with a CROSS APPLY function based on the starting date and the x-number of days ahead.
I then evaluate the actual daynumber corresponding with that date with the daynumber in table Y. That works fine with a 7-days schedule but I can't get it fixed with a 14-days schedule. Day 8 in that schedule represents an actual day 1 but how do I know what actual date day 8 is ... I think I have to start with the starting date in table X ...
I think ideally I would like to have the generated days as follows (as an example in case of a 14-days schedule starting 2014-05-01 for 30 days ahead):
2014-05-01 = day 4 (= actual daynumber)
2014-05-02 = day 5
2014-05-03 = day 6
...
2014-05-10 = day 13
2014-05-11 = day 14
2014-05-12 = day 1
2014-05-13 = day 2
2014-05-14 = day 3
...
2014-05-24 = day 13
2014-05-25 = day 14
2014-05-26 = day 1
2014-05-27 = day 2
...
2014-05-31 = day 6
With this done I can compare the actual daynumber with the daynumber in Table Y.
The rownumber that the CROSS APPLY function generates has to be reset to 1 after day 14. I tried PARTITION BY in THE ROW_NUMBER function but to no avail ... The only field I can partition by is the maximum value of the daynumber (14 is the example) but that is not allowed in the rownumber function.
I want to find previous date from selected date. below is the sample data.
DECLARE @StartDate SMALLDATETIME = '1/11/2016'
declare @tempdat table(repdate smalldatetime)
insert into @tempdat values ('10/26/2015')
insert into @tempdat values ('10/29/2015')
insert into @tempdat values ('11/1/2015')
insert into @tempdat values ('11/27/2015')
insert into @tempdat values ('11/25/2015')
insert into @tempdat values ('11/20/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/10/2015')
insert into @tempdat values ('11/11/2015')
insert into @tempdat values ('11/11/2015')
Now if i pass the date '10/26/2015' then i want select prev date of passed date. in this example no prev date is available, so result set would be nothing.
if i pass the date '11/10/2015' then result should be '11/1/2015' which is prev small date available in table.
Hi Guys,
I currently have a large database, and I wish to query it.
It is running MSSQl 2000.
I wish to have a query that when ran, returns results between NOW() and 7 days ago (A weekly report from the current date).
The date/time field I am sorting by is stored as YY-MM-DD 00:00:00
Any help is appreciated :)
dear gurus,
I want to get the working days between two days..
in a single query.
i will give the start_date '06-02-2008',end_date '06-13-2008' the result should be as below.
06-02-2008Monday
06-03-2008Tuesday
06-04-2008Wednesday
06-05-2008Thursday
06-06-2008Friday
06-09-2008Monday
06-10-2008Tuesday
06-11-2008Wednesday
06-12-2008Thursday
06-13-2008Friday
Thanks in advance.
cool...,
I Have a date range and i want to calculate the number of days - the weekends(saturdays and sundays) so that only businessdays are obtained.
A simple table's example:
Name, surname, datebeg, dateend
How can can it be done with sql?
BB
Hi,
I've searched quite a bit for help with this syntax but have given up.
I need help with the where clause of a query using SQL SERVER that selects records a certain number of days before the current date. I have tried this and it's incorrect syntax:
WHERE (fldDate < ({ fn NOW() - 500 })
Can someone please help me out with correct syntax for this? thanks much.
Hi,
I'm trying to query an SQL table column with date values to show 8 Days ago results.
I've started with this query:
SELECT ficheiro, erro, descritivo_erro, contrato, DO, movimento, data, descritivo, tipo_movimento, desconto, montante, comissao, IVA
FROM status_day
WHERE (YEAR(data) = YEAR(GETDATE())) AND (MONTH(data) = MONTH(GETDATE())) AND (DAY(data) = DAY(GETDATE()) -8)
ORDER BY descritivo_erro, contrato
The problem is that the text in red will have some problems when the month changes - If I want the 8 days ago results from January and the system date is 1st of February the query will not return any values.
I read something about DATESERIAL but is wasn't conclusive on how to use it with system date.
Please help me out with this query.
Is there any easy way to calulate number of business days between the 2 dates ?
I want to exclude all sat and sun between the 2 dates.
I'm looking for a DATEDIFF function which will give me the
BUSINESS days difference between 2 dates.
e.g: datediff(day,'08/08/2007','08/14/2007) would normally result in 6 (i think), however in business days this would be 4.
is there such a function?
Thx
If I run the below command, it clean up the files inside the folders but unable to clean up the folder and sub-folders older than 30 days. xp_ cmd shell ' forfiles -p "D:abcd" -s -m *.* -d -30 -c "cmd /c del /Q @path"'
View 4 Replies View RelatedHi,
I'm having problems creating a query that brings the results based on last 8 days on date column (column9) and diferrent year from the current one.
If I run the each filter,
Code SnippetYear(Column9) <> Year(GetDate())
and
Code Snippet
(Column9 >= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 8), 0)) AND (Column9 < DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 7), 0))
it returns the right values.
So far I've got (it returns no results):
Code Snippet
SELECT Column1, Column2, Column3, Column4, Column5, Column6, Column7, Column8, Column9, Column10, Column11, Column12, Column13, Column14,
Column15, Column16, Column17, Column18, Column19, Column20, Column21, Column22, Column23, Column24, Column25, Column26, Column27,
Column28, Column29, Column30, Column31, Column32, Column33, Column34, Column35, Column36, Column37, Column38, Column39, Column40,
Column41, Column42, Column43, Column44, Column45, Column46, Column47, Column48, Column49, data_anulacao, data_instalacao
FROM Contratos01
WHERE Year(Column9) <> Year(GetDate()) AND (Column9 >= DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 8), 0)) AND (Column9 < DATEADD(Day, DATEDIFF(Day, 0, GETDATE() - 7), 0))
ORDER BY Column1
Please give me your input.
THX.
I need a function to count business days (exclude Sat, Sun) that I can call within a view. I would rather not build a "calendar table" this will be used ongoing for years into the future.
Does anyone have anything like this they could share? If there is another source you could direct me to I would appreciate that as well.
TIA
Phil
I have stumbled upon a sql question I cannot answer. I am looking for the following SELECT sql statement:
Basically I need a way to get "5 days ago from today". BUT, the trick is that there is a table called tblnoworkday with contains weekends and holidays and those dates cannot count. So basically what I am really trying to get is "5 Business days ago from today".
So it would basically do this for an query input date of '4/9/08'. If the table is called TblNoWorkday and contains the following records:
...
2008-04-06 00:00:00.000
2008-04-05 00:00:00.000
...
This is the last 5 business days then: (not in the table)
4/9/08
4/8/08
4/7/08
****weekend****
4/4/08
4/3/08
The query should return just 4/3/08. The problem is 4/3/08 doesn't exist in the database since the database only contains the no work days.
Any ideas on how to do this in a simple query without having to create another table with the valid working dates?
Thanks Before Hand,
Adiel
This is my table:
use tempdb
go
if object_id('Data', 'u') is not null drop table Data
go
with temp as (
select top 10000 row_number() over (order by c1.object_id) Id
from sys.columns c1 cross join sys.columns c2
[code]....
What index would be best for these three queries? With best I mean the execution time, I don't care about additional space.
This is the index I currently use:
create nonclustered index Ix_Data on Data (StateId, PalletId, BoxId, Id)
The execution plan is SELECT (0%) - Stream Aggregate (10%) - Index Scan (90%).
Can this be optimized (maybe to use Index Seek method)?
I need to build a CTE query to find for the same Cabstamp (document) where i have different Origin.
I know that i can build this with a correlated subquery, but i´am curious about using CTE.
I post sample create Script:
create table #temp (Cabstamp varchar(10), account varchar(10),document varchar(15), origin varchar(2), debit numeric(10,2), credit numeric(10,2), datalc datetime)
insert into #temp (Cabstamp,account,Document, origin, debit, credit, datalc)
select 'ADM12345',111,'CMP-01','FO',1000,0, '20150110'
union
select 'ADM12345',112,'CMP-01','FO', 500, 0,'20150110'
union
select 'ADM12345',6811,'CMP-01','DO',0,1500,'20150110'
union
[code]....
Hi and Thank you in advance
I am trying to find a away to calculate the number of business days between two dates. In other word, I do not want to count Saturday nor Sundays if those days are between the two dates.
Example
if Date1 = 11/26/1999
Date2 = 11/30/1999
the DateDiff(dd,Date1,Date2) the result should be 2
I need to do this against a table which might not have a lot of records, but I also need to not count Holidays if they fall within the two Dates.
Thank you in advance
Tomas