I'm not sure what is going on but I created a table in the body of a report. I have set the RepeatOnNewPage property to be true. When I preview it the header is on all pages. Perfect! However when I print preview it or export to PDF the header is on Page 1 thru 6 it skips 7 and 8 and then prints on 9. This is happening on a few of my reports.
Any suggestions?
CardGunner
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
A report with a subreport has no table headers in some pages during printing ,and it's anomaly.
"Repeat header rows on each page" was selected in table properties page. Does anybody meet this kind of problem?
THANKS.
I have report with a table, that generates rows to more than 1 page. When the user prints the report, each page should show the table header.
Presently or by default , the table header is shown(printed) only on the first page.
Please let me know, how can I achieve this.
I am staring to lose my mind on all this "work-around" BS in trying to create a dynamic header.
I have a report with contains a table, whose first two lines are a header line in which I want to repeat on each page. Then I have about 20 detail rows of information related to the header. The 21st detail row is a merged cell that contains a subreport relating to the header item.
When printing to PDF, the detail rows consume about half the page and the subreport is anywere from half a page to several pages long. When the subreport is more than half a page, it skips the end of the first page and starts on the top of the next page, leaving the bottom half of the first page blank. No matter what I set the page breaking to, it continues this behavior. In addition, when the subreport data spans more than one page, my parent table's header row will not print to the next page even it the RepeatOnNewPage is set to true.
I am coding this way because I have found no good way of creating a dynamic header that will correctly and consistantly display data that has detail that spans more than one page.
Any thoughts on what I might be doing incorrect?
Hi All,
Could you guys please help me with printing reports invoked thru command line/ URL access to print automatically to specific printers and specific trays and also is it possible to set the specific printer and tray as parameters.
Any suggestions is appreciated
Thanks A lot in advance
e,g :
http://localhost/reportserver?/testreports/employee sales&UserID='ABC'&LName=Lastname='victor'&rs:Command=Render
I have a report that prints one record on a page. It also has four tables which print records from related tables. I pass it the ID of the master record an it works great.
But I need to be able to print multiple master records, ie use the same form to print more than one record from the master table. I can pass more than one ID and change the Stored proc to return more than one master record, which I believe, with the addition of a page marker, will produce a multiple form report - but what about the tables which display multiple records for each ID? Does reporting Services understand the relationship between the tables and and restrict the tables on each page to the ID?David
I have a report that only has one page when previewed but when it's printed there are two pages. This is a problem because I get two printed pages to my report with "1 of 2 pages" on the first page and "2 of 2 pages" on the second but there is only data on the first page and the second has header and footer but no data.
Is there a way to force the report to fit everything on one page? Or some other setting I am missing?
Thanks.
I am having a problem with headers printing on separate pages. I have a report in RS 2000 that consists of 4 tables. Each table has several tables embedded within the table. The report has a header and each main table has two headers. The report layout is 11in. x 8.5in. with margins of 0.05in. The view space of the report is 10.2125in. Doing the math, I am withing the bounds of the paper; however, when I export to PDF, the report header and a legend table prints on the first page, the first table header prints on the second page, the second table header prints on the third page, the first data row prints on the fourth page and the rest of the table prints on the next page or several pages as needed. This repeats for the subsequent tables because I have the table property set to Insert page break after this table. I also have Repeat header rows on each page checked. I am at a loss as to why this continues to happen.
View 2 Replies View RelatedI ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies View RelatedI must confess it has been a long time since I have done any SSRS reporting. I have the following SQL Statement (I will change it to a stored Procedure with parameters once I get the design done):
SELECT
rc.wo_id,
rc.process_id,
rc.item_id,
rc.lot_no AS full_lot_no,
rc.oper_id, rc.seq_no,
CAST(la.attr_value AS DECIMAL(12, 2)) AS weight,
[Code] ....
This gives me the data I want which looks like this:
Rework ID Ingot Oper ID Piece Rework
28 xxxxxx14 5 M88 Route 1
55 xxxxxxx15 5 B106 Route 2
79 xxxxxxx19 5 M68 Route 3
164 xxxxxx234 5 T16 Route 4
xxxxxx234 5 B82 Route 4
The grouping is on the Rework ID. Any of the pieces can be put on any rework route. As you can see, there are 4 routes, but 5 pieces. What I need is for each rework ID to be printed on its own paper even if there is only 1 record for the route. So I would expect 4 pieces of paper, 3 with 1 record, the 4th with two pieces. Is there a setting in the Tablix or report that I can set, or is there an expression I can use?
I have a strange problem. All my report footer has 3 text boxes with the following formulea in them.
="Printed by " + User!UserID + " on " + DateTime.Now.ToString()
="Execution Time: " +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).TotalSeconds < 1, "0 seconds",
(
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Hours & " hour(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Minutes & " minute(s), ", "") +
IIf(System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds > 0, System.DateTime.Now.Subtract(Globals!ExecutionTime).Seconds & " second(s)", ""))
)
="Page " + Globals!PageNumber.ToString() + " of " + Globals!TotalPages.ToString()
When I run the report on the report manager, (through the site), the execution time, number of pages everything show properly. But when I print the report, the execution time and total pages is printing huge numbers, which are not in any way related the actual page numbers.
For example:
When I run the report it shows the footer like below:
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 6 Seconds Page 1 of 213
When I print
Printed by xxxxxxxxx on 3/28/2008 1:59:01 PM Execution Time: 47 Seconds Page 1 of 483
Does anyone know what is the solution to this problem is?
I really appreciate your help,
Thank you,
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
I am building a report with 3 tablixs using SQL Server 2008. Tablix 3 is long and spans over 3 pages. I am trying to get the header for the to remain visible on all pages and as we scroll through the end of each page. Now this is a frequently asked question and I have found the approach to achieve the desired results. All approaches involve clicking in the advanced mode of the row and column groups to modify the static and dynamic groups.However, when I click the advanced mode there is no effect. I have attached a picture of the design mode. The tablix3 is grouped by the Department column.
View 9 Replies View RelatedHi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
Hello everybody
I'm workung on a report which will both function as a online report but also as a printed sheet. i've got a table which has to be sortable, so i made a user sort. however, to fit the report onto a page, i had to make a additional header row, which contains only the sorting arrows. now, i'd like this row not to apear on the printed out version, how would i do this?
Alternativly, would it be possible to not show the user sort icons (down- and upwards arrows), but to make the header fields clickable? This would solve my problem as well.
thanks for any advice
exmap
I has developed one report in SSRS in SSRS 2008 R2 and when I preview the report in report viewer in all pages Report Header is repeating, whereas when I export the same report to PDF strange for some pages header is missing.
When I searched in google for SSRS 2008 Microsoft agreed that it is a bug and they provided the hotfix. And this hotfix is not working for SSRS 2008 R2 as it is a higher edition but still I facing the same issue.
I have a sql query
create table temp
(
date1 datetime,
category varchar(3),
amount money
[code]....
In above format:15-10 means Oct 15, 15-09 means Sept 15I am getting issues while formatting this in SSRS.I need SSRS table headers to be dynamic. I need that it should be according to the sql table header...The table header should change according to the sql query
I have a report that I created and the report was working until I added some fields to a group footer row in a table.
My table has 5 group levels. I had information displaying in the 5th level header group and detail. It was working fine. Then I added some fields to the 4th level group footer. Now it displays only the Page header, Table header, and the 4th level group footer data.
What happened to the rest of the data?
All the cells and rows I want to display have the Visibility Hidden set to false. I tried removing the objects I added (to the 4th level group footer) and it still does not work. Is this a bug or did I set something that is hiding the data.
Thanks,
Fred
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
I want to ship 500,000 aged transactions each night to an archive table and delete them from their source table in one or more logical units of work (LUW). Each row is approx 60 bytes and there is only one non clustered index on the source table presently.
I'm trying to weigh the pros and cons of 3 alternatives. One of them would basically insert the non-aged rows into tempdb, ship the aged records, truncate the table and then insert the tempdb records back into their source all in the same LUW.
For this alternative, I'd at least like to turn off logging when the records get inserted into tempdb as I dont see any value in logging that part of the activity. Is this possible?
in microsoft doc there is written on the topic of BP Extensions with SSD's in SQL Server 2014: only clean pages are written to disk... does this mean data pages that have not been modified yet? or also those data pages that have already been modified, and where log has finished writing and the transaction has been marked as commited??
why are there clean data pages being written to L2 cache to make space for other not modified pages? I mean, shoudnt they be modified first, before letting other unmodified data pages into the Cache? I mean they have still to be modified..that makes no sense to me to page them out and page them in again just for other data pages...
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
Hello, everyone:
How to calculate or estimate the pages or a table? I always heard someone said their databases have many pages increase one day. What does it mean?
Thanks
ZYT
I have a SQL 7 database with about 30 tables in. For documentation purposes I need to print out the structures of each table. I have tried using the diagram tools but no joy.
I have access to Access, Crystal Reports, if these are any use?
Please help!!
Tony Kavanagh
i need help printing only certain rows from within a table.. for instance, if my table looks like this :
+-------------------+----------------+----------------------+
| Description | Heading | Link |
+-------------------+----------------+----------------------+
| Google | Heading 4 | www.google.com |
| Toms Hardware | Heading 3 | www.tomshardware.com |
| Anandtech | Heading 2 | www.anandtech.com |
| check this out | Heading 1 | www.henryadams.com |
| another heading 4 | Heading 4 | www.heading4.com |
| test | Heading 3 | www.test3.com |
| heading 4 agagin | Heading 4 | laksjdf;alkf |
| new heading test | newHeadingTest | www.newheadingtest |
+-------------------+----------------+----------------------+
and i want to only print out the results for "Heading 4" under the "Heading" column, and only have the results print out once, using php.. how would i do this?
The Headings are inputed by the user through a web interface i created where the user may either select an exisiting heading or type in a completely new one that has nothing to do with any of the others.
thanks for any and all of your help..
In SQL Server, is there a way to list all the data pages, index pages, IAM pages, etc. for a given user table? Like this:
Data pages: (1, 200), (1, 201)
Index pages: (1, 202)
Or if that is impossible, then is it possible to list only the data pages for a table?
Hello !! :O)
I have a SQL 7 database with some tables in. For documentation purposes I need to print out the structures of each table and all the rows in every table.
Please help!!
Thanks
I'm kinda new to SQL. I'm trying to get a print out of a specific table and its columns and column types. Is there a specific command or code that I can use to accomplish this?.
thx,
Newbie.
IF (SELECT OBJECT_ID('t1')) IS NOT NULLDROP TABLE t1GOCREATE TABLE t1 (c1 INT, c2 INT)DECLARE @n INTSET @n = 1WHILE @n <= 454BEGININSERT INTO t1 VALUES (@n, @n)SET @n = @n + 1ENDSELECT name, indid, CASE indidWHEN 0 THEN 'Table'WHEN 1 THEN 'Clustered Index'ELSE 'Nonclustered Index'END AS Type,dpages, rowcntFROM sysindexesWHERE id = OBJECT_ID('T1')name indid Type dpages rowcnt---- ----- ---- ------ ------NULL 0 Table 2 454I have a table containing 454 rows of two columnsof type INT with each being 4 bytesc1 int = 4 bytes+c2 int = 4 bytes=8 bytes per rowIf I entered 454 rows : 454 * 8 = 3,632 byteseach SQL Page is 8KB = 8 * 1024 bytes= 8,192 bytesa data page header takes the first 96 bytesleaving 8096 bytes for data and row offsets.Each record uses a row offset at the end of the pageconsisting of 2 bytes. 454 * 2 = 908 bytes.8096 - 3632 - 908 = 3,556 bytes. Should this befree data bytes?For a heap table, does SQL add an internal uniqueidentifiercolumn also? or my question is when does SQL adda uniqueidentifier? I am reading Inside SQL 2000 andtrying to understand a few things.A uniqueidentifier of 4 bytes gets added when a clustered indexexists but it is NOT a UNIQUE clustered index. AND onlyif duplicate record is added those two records only geta uniqueidentifier value.But in my example it's a heap table with no indexes. Evenon a heap table with no indexes a ROWID or Uniqueidentifierget added? Based on the INSERT statement above allvalues are unique.So what am I missing to understand why 453 rowsmake one data page to be used whereas 454 rowsmake two data pages to be used?Thank you
View 1 Replies View RelatedI have multiple security groups for which I would like to print off the
different table rights associated. Is there a quick and easy way to
accomplish this? Thanks, Craig.
If a single row of data spans a page then the column header is not repeated until the next row on the next page.
Is there a way to overcome this?