I have a stored procedure which runs a query, then turns it on its side (so that the rows are column headers).What I need to do now is test if any of the values in a row from this stored procedure are null.Any suggestions on how to get started? Is there some function that will tell me if any value in the row is null?
View 2 RepliesI run a stored procedure for which I have a return variable. The stored procedure returns the ID of a row in a table if it exists:
m_sqlCmd.ExecuteScalar();
The m_sqlCmd has been fed an SQLParameter with direction set to output.
When the stored proc returns, I want to test it. Now when there IS a row it returns the ID ok.
When the row doesn't exist, in my watch I have:
m_sqlParam.SqlValue with value {Null}
I can't seem to work out how to test this value out.
I've tried several things but none seem to work.
This line compiles ok, but the following runs into the IF statement as if the SqlValue is null??
if (m_sqlParam.SqlValue != null)....
{
// I'm here!! I thought the watch says this is null???
}
Sorry if this is obvious, but I can't work this one out!!
I have an employee directory application that displays employees in a gridview. When a record is selected, a new page opens and displays all info about the employee, including their photo. I have the code working that displays the photos, however, when no photo is present an exception is thrown that "Unable to cast object of type System.DbNull to System.Byte[]". I'm not sure how to test for no photo before trying to write it out.
My code is as follows (with no error trapping):
Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load, Me.Load
Dim temp As String
Dim connPhoto As System.Data.SqlClient.SqlConnection
Dim connstring As Stringconnstring = Web.Configuration.WebConfigurationManager.ConnectionStrings("connPhoto").ConnectionString
connPhoto = New System.Data.SqlClient.SqlConnection(connstring)temp = Request.QueryString("id")
Dim SqlSelectCommand2 As System.Data.SqlClient.SqlCommand
Dim sqlstring As String
sqlstring = "Select * from dbo.PhotoDir WHERE (CMS_ID = " + temp + ")"SqlSelectCommand2 = New System.Data.SqlClient.SqlCommand(sqlstring, connPhoto)
Try
connPhoto.Open()Dim myDataReader As System.Data.SqlClient.SqlDataReader
myDataReader = SqlSelectCommand2.ExecuteReader
Do While (myDataReader.Read())
Response.BinaryWrite(myDataReader.Item("ImportedPhoto"))
Loop
connPhoto.Close()Catch SQLexec As System.Data.SqlClient.SqlException
Response.Write("Read Failed : " & SQLexec.ToString())
End TryEnd Sub
End Class
I'm having trouble figuring out how to use a UDT class. I'm simply trying to test out the class in a query window in the management studio. Here's the simple snippet:
declare @test TestObject;
set @test.FirstName = 'bob'
select @test.FirstName
Obviously my object has a string property called FirstName. When I execute this simple query I get the following error:
Mutator 'FirstName' on '@test' cannot be called on a null value.
Any ideas?
Is there a way to check for System.BDNull when I use the column name instead of column index? The column Photographer (in the excample below) sometimes contains the value null, and then it throws an error. Or do I have to go back to counting columns (column index of the returned data) again? try { connection.Open(); using (SqlDataReader reader = command.ExecuteReader()) { if (reader.Read()) { albumItem = new Album((int)reader["Id"]); if (reader["Photographer"] != null) albumItem.Photographer = (string)reader["Photographer"]; albumItem.Public = (bool)reader["IsPublic"]; } } } Regards, Sigurd
View 2 Replies View RelatedWe are setting up a test lab environment with 100 machines. We want one master testing db that gets replicated to each to run scripted application tests nightly.
My goal is to minimize the amount of work to move this thing to each of the 100 test machines. I am wondering if we need to even have the sql local and invest in a monster db server with 100 copies of the db we restore and each test machine point to their own db on that server, or if I should use db mirroring or something to get the master test db to each of those machines instead.
Now that we have a good programming model in SSIS - the question is whether to write automated unit tests for your packages, and would it generally be a good idea for packages?
Also - if yes to write tests - then where to find more informations regarding How to accomplish that?
hi every one,
i need to test SSIS pacakge which will import data from different database where record count is around 5 millions.
iam planning to test it through c# code as well as manually also.
SSIS source : consist of 7 tables
SSIS destination :consist of 7 tables
Using c# code iam trying to run ssis package through batch file.
i am putting expected rowcount, column count in an excel file and comparing same with destination tables by writing query implementing ADO.Net concept.
am i going right way ,can any one suggest best and productive way to test the ssis package .
what are the other things i need to test it.
do any one can add test cases to it.
S.No
Test Case
1
Verify all the tables have been imported.
2
Verify all the rows in each table have been imported.
3
Verify all the columns specified in source query for each table have been imported
4
Verify all the data has been received without any truncation for each column.
5
Verify the schema at source and destination
6
Verify the time taken /speed for data transfer
7
Fields truncated due to difference in length of the field at destination.
Regards
Arif shareef
Hey. I need to substitute a value from a table if the input var is null. This is fine if the value coming from table is not null. But, it the table value is also null, it doesn't work. The problem I'm getting is in the isnull line which is in Dark green color because @inFileVersion is set to null explicitly and when the isnull function evaluates, value returned from DR.FileVersion is also null which is correct. I want the null=null to return true which is why i set ansi_nulls off. But it doesn't return anything. And the select statement should return something but in my case it returns null. If I comment the isnull statements in the where clause, everything works fine. Please tell me what am I doing wrong. Is it possible to do this without setting the ansi_nulls to off??? Thank you
set ansi_nulls off
go
declare
@inFileName VARCHAR (100),
@inFileSize INT,
@Id int,
@inlanguageid INT,
@inFileVersion VARCHAR (100),
@ExeState int
set @inFileName = 'A0006337.EXE'
set @inFileSize = 28796
set @Id= 1
set @inlanguageid =null
set @inFileVersion =NULL
set @ExeState =0
select Dr.StateID from table1 dR
where
DR.[FileName] = @inFileName
AND DR.FileSize =@inFileSize
AND DR.FileVersion = isnull(@inFileVersion,DR.FileVersion)
AND DR.languageid = isnull(@inlanguageid,null)
AND DR.[ID]= @ID
)
go
set ansi_nulls on
I need to restore test DB from production backup but once it is restored I would need all the permissions of sql logins and windows AD account intact in test Db as it was before.
View 4 Replies View RelatedIn my report i have CNAME parameter , which allows null value. I checked Allow null value check box in report parameter properties.
when i preview the report , it displays checked NULL check box beside CNAME parameter . I want to give some meaningful name(i.e.ALLCustomers) to this checkbox instead of NULL.
Is it possible through SSRS designer?
I have a flat file with the following columns
SampleID Rep_Number Product Protein Fat Solids
In the flat file SampleID and Product are populated in the first row only, rest of the rows only have values for Rep_Number, Protein, Fat, Solids.
SampleID and Product are blank for the rest of the rows. So my task is to fill those blank rows with the first row that has the sampleID and Product and load into the table.
I have a report that is run on a monthly basis with a default date of null. The stored procedure determines the month-end date that it should use should it be sent a null date.
The report works fine when I tell it to create a history entry; however, when I try to add a subscription it doesn't appear to like the null parameter value. Since I have told the report to have a default value of null it doesn't allow me to enter a value on the subscription page.
Now, I suppose I could remove the parameter altogether from the stored proc, but then the users would never be able to run the report for a previous time period. Can someone explain to me why default values aren't allowed to be used on subscriptions when they seem to work fine for ad hoc and scheduled reports? This is really quite frustrating as most of my reports require a date value and default to null so that the user doesn't have to enter them for the latest data.
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Key cannot be null. Parameter name: key
Looks like there was a fix and then I read this fix is not a fix. Does anyone know how this can be rectified? Does it mean that only Windows authentiation is the only way it works. The Software is over 2 years old, there are no excuses.
I am getting this error: "Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails." -- But my value is not null. I did a response.write on it and it show the value. Of course, it would be nice if I could do a breakpoint but that doesn't seem to be working. I'll attach a couple of images below of my code, the error, and the breakpoint error.
Server Error in '/' Application.
Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.Source Error:
Line 89: sContact.Phone = sPhone.Text.Trim
Line 90: sContact.Email = sEmail.Text.Trim
Line 91: sContact.Save()
Line 92:
Line 93: Dim bContact As Contact = New Contact()Source File: F:InetpubwwwrootOutman KnifeCheckout.aspx.vb Line: 91 Stack Trace:
[SqlException (0x80131904): Cannot insert the value NULL into column 'OrderID', table 'outman.outman.Contact'; column does not allow nulls. INSERT fails.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857354
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734966
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.SqlClient.SqlCommand.CompleteExecuteScalar(SqlDataReader ds, Boolean returnSqlValue) +39
System.Data.SqlClient.SqlCommand.ExecuteScalar() +148
SubSonic.SqlDataProvider.ExecuteScalar(QueryCommand qry) +209
SubSonic.DataService.ExecuteScalar(QueryCommand cmd) +37
SubSonic.ActiveRecord`1.Save(String userName) +120
SubSonic.ActiveRecord`1.Save() +31
Checkout.btnCheckout_Click(Object sender, EventArgs e) in F:InetpubwwwrootOutman KnifeCheckout.aspx.vb:91
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +105
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +107
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5102
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
I would drop and add the table but the data can't be deleted. So if anyone could help with the statement it would be greatly appreciated. Thanks
View 7 Replies View RelatedI'm trying to set the concat... option to OFF
all the time and in all my databases
I tried this command
USE master
EXEC sp_dboption 'DatabaseName', 'concat null yields null', 'FALSE'
but it doesn't change anything
Select NULL + 'TOTO'
----> NULL
(it should be 'TOTO')
hi,my structure table in database:Amount float(53) not null default 0when i try to run his script:alter table ABC alter column Amount float(53) nullit can only set the Amount to allow null, but can't set the defaultvalue to empty.anyone know how to set the field to allow null and default set toempty, no value.thanks
View 5 Replies View RelatedIt's giving me an error while I'm trying to change column value from not null to null..
'tblid' table
- Unable to modify table.
Cannot insert the value NULL into column 'ValidID', table 'Xe01.dbo.Tmp_tblid'; column does not allow nulls. INSERT fails.
The statement has been terminated.
Hello.
I've built a sample CLR function with the following declaration....
CREATE FUNCTION GetManager(@DeptCode nvarchar(3))
RETURNS nvarchar(1000)
WITH RETURNS NULL ON NULL INPUT
AS
EXTERNAL NAME Assembly1.[ClassLibrary1.MyVBClass].MyManager
And it works as expected, except when I use NULL:
DECLARE @MyManager nvarchar(1000)
EXEC @MyManager = dbo.GetManager NULL
PRINT @MyManager
It returns the value "Unknown" as it would have for any unknown DeptCode, as-programmed.
I'm of the theory it should have returned NULL without actually firing the function? Or is this only for non-CLR items... or stored procedures, not functions?
We have a case where in we should show date based on conditions for e.g if we had a column defined as
col varchar(10) then we would show col as 'NULL' for some condition and actual value when no condition
Normaly date values are stored here e.g under col 20150901 .
Case
when col>'20150901' then 'NULL'
else col
end as Derivedcol
Note this is an extract process and we are presenting data by pumping the data in a table .
Now there is another similar column -colz varchar(10) which stores date but doesnt have case condition so whenever date has no value its shows null which is database null.
So whats the difference between database null and string null ?
How can we show database null for the case condition instead of string "null"?
I have two columns A (which allows nulls) and B( which does not allow nulls).
How can I add the contents of columns A and B SO THAT I DO NOT GET A NULL RESULT WHEN A IS NULL.
The result of A+B concatanation will be stored in a column, C.
Appreciate your help
Ziggy
Hi guys,
I've got a query on a particular table returning an odd result:
SELECT DISTINCT WorkStation
FROM Invoice
WHERE WorkStation Is Not Null
ORDER BY WorkStation
This query returns the rows I'd expect plus a null row. This doesn't happen in databases at other sites, or in other tables at this site. The following query behaves as I'd expect returning only non-null AccountNumbers.
SELECT DISTINCT AccountNumber
FROM Suppliers
WHERE AccountNumber Is Not Null
ORDER BY AccountNumber
I can't reproduce these results on another site on a table of the same structure, or on another table at this site.
Any suggestions as to what might be going on?
Pertinent info:
---
select @@Version
Microsoft SQL Server 2000 - 8.00.760 (Intel X86)
Dec 17 2002 14:22:05 Copyright (c) 1988-2003 Microsoft Corporation
Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
---
dbcc checkdb
Abridged result:
CHECKDB found 0 allocation errors and 0 consistency errors in database 'POS'.
---
SELECT * INTO #Inv FROM Invoice
SELECT DISTINCT WorkStation
FROM #Inv
WHERE WorkStation Is Not Null
ORDER BY WorkStation
Does not reproduce this problem (and so is a probable fix) but the questions remains, what causes this?
TIA,
Karl.
I have 595 default constraints in my database. I can return a list of them using the following:
select * from sys.default_constraints
Is there a way I can return a list of just the ones where NULL is still allowed? I want to update all of the columns with a default value to not allow NULLs.
Dear folks,
please tell me the query for altering a column from not null to null
Vinod
Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
ok here is a WIERD issue.
I've NEVER EVER had this issue, I have always done this and it works great both locally and remotely.
I have a table, which is a "customers" table.
I have a stored procedure which takes in parameters (name, address, password etc...) and returns me back, via a parameter declared as output - the customer ID.
I've always done this, and works great.
Now, this works fine locally.
IF I try to run this/do the exact same execution of commands (create a customer) remotely (where the database is stored, so copying everything from local to "over there") it does not work.
I get a DBNULL value back from the parameter, declared as an int output.
IF I copy and paste this Stored procedure Query/command into Query Analyzer and execute it (on the remote connection) and run it, giving it the exact same values as I do, it works perfect and returns me the correct value.
I've even dropped and recreated the stored procedure but makes no difference.
Any ideas why?
here is the proc....
CREATE PROCEDURE [dbo].[DoCreateNewCustomer] (
@theFirstName nvarchar(25),
@theLastName nvarchar(25),
@theAddress nvarchar(50),
@theCity nvarchar(15),
@thePostCode nvarchar(9),
@thePhoneNumber nvarchar(21),
@theMobilePhoneNumber nvarchar(21),
@theIPAddress nvarchar(25),
@thePassword nvarchar(50),
@theEmailAddress nvarchar(30),
@result int output
)
AS
SET @result = (SELECT [ID] FROM Customers WHERE emailAddress = @theEmailAddress)
IF @result IS NOT NULL
SET @result = -1
ELSE
BEGIN
SET @result = @@IDENTITY
INSERT INTO Customers (
Firstname,
Lastname,
Address,
City,
Postcode,
PhoneNumber,
MobileNumber,
IPAddress,
[Password],
EmailAddress
)
VALUES (
@theFirstName,
@theLastName,
@theAddress,
@theCity,
@thePostCode,
@thePhoneNumber,
@theMobilePhoneNumber,
@theIPAddress,
@thePassword,
@theEmailAddress
)
END
GO
Any ideas why it does not work when calling the stored proc from either a web app, or through QA remotely but works fine when I run that command in QA or locally?
Again, if I do:
EXEC DoCreateNewCustomer { params } - the output result it gives me is DBNULL (if on remote connection)
If I do this locally, perfect
If I copy and paste pretty much the SP into QA and execute it on the remote connection, works great, and also locally.
Hi all,
One of my columns is the table has some Null values, and I Would like to stop having NULL values into that column any more.
I know, If I alter the column to NOT NULL will throw me an error, since it does a batch update.
Is there any way to achieve this...
Thanks...
I am trying to test to see if my code is returning rows. If it's not I want to display an error saying "Nothing Found" Please review and give me your thoughts on the best way to accomplish this.
1 Protected Sub btnLogin_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnLogin.Click
2 Dim SubEmail As String
3 Dim SubPassword As String
4 SubEmail = txtNewsEmails.Text
5 SubPassword = txtNewsPassword.Text
6 Session("NewsEmail") = SubEmail
7 Session("NewsPassword") = SubPassword
8 Dim sID As Integer
9
10 Dim cs As String = ConfigurationManager.ConnectionStrings("csTiPs3").ConnectionString
11 Dim cn As SqlClient.SqlConnection = New SqlClient.SqlConnection(cs)
12 cn.Open()
13 Dim selectString As String = "Select SubscriberID from NewsletterSubscribers WHERE SubscriberEmail = '" + SubEmail + "' AND SubscriberPassword = '" + SubPassword + "'"
14
15 Dim cmd As SqlClient.SqlCommand = New SqlCommand(selectString, cn)
16
17 Dim reader As SqlDataReader
18 reader = cmd.ExecuteReader
19 While reader.Read()
20 sID = reader("SubscriberID")
21 End While
22 Session("SubscriberID") = sID
23
24 reader.Close()
25
26 rtsNewsletters.SelectedIndex = 1
27 rtsNewsletters.FindTabByText("Subscribe").Enabled = True
28 rmpNewsletters.SelectedIndex = 1
29
30 End Sub
Thanks all,
Brett
test
View 9 Replies View Relatedtest
Duplicate post
View 2 Replies View RelatedI have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan