I have problem with permissions
here is my error
http://img2.tapuz.co.il/forums/1_91537174.jpg
how can I give all the computers in the network the permission to see the reports.
thanks
The permissions granted to user 'domainusername' are insufficient for performing this operation. (rsAccessDenied)
Hi,
I wonder if anyone can help me?
I have installed and configured sql server 2005 express edition with advanced services on an xp box, with the aim of using reporting services.
I have set up reporting services successfully using the report manager, with my web services id = netwrokservice.
I can access both the report manager and report url locally, i.e while using localhost anjd on the machine. The problem arises however when i try to access
the reports from another machine, as i get the message:
"The permissions granted to user 'domainusername' are insufficient for performing this operation. (rsAccessDenied)"
when going to for example:
"http://servername/ReportServer/Pages/ReportViewer.aspx?%2fReport1&rs:Command=Render"
I have looked at various sites (including microsoft) in an attempt to find a solution to this and most sites give exmaples of how to configure the full
version of reporting services which i do not have. The things that I have managed to gleam and try are:
- open up security on dir: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer to everyone and allow all access
- added my own username as a new role assigment in the report manager page
- added my own username to the reportserveruser and reportingserviceswebservicesuser roles, as indicated by microft:
http://msdn2.microsoft.com/en-us/library/ms365166.aspx, who state that "Custom authentication extensions and custom role assignments are not supported. You
must map existing Windows domain user and group accounts to predefined role definitions."
Can anyone suggest where to look next as I cannot believe that this should be this difficult?
Many Thanks in advance
I have an application that talks to an access db located on a 2000 server. I would like grant permissions to the application instead of a specific user. Any help would be great...
View 6 Replies View RelatedHi,
I am trying to deploy a reporting services report to remote reorting services server , i did the following :
in project property : http://192.xxx.xxx.xxx/reportserver
(NB: my pc and server are on the same domain)
and i assigned a permission for my user 'mydomainmyuser' on the virtual folder of the reporting service, but i got this error :
The permissions granted to user 'mydomainmyuser' are insufficient for performing this operation.I
I know it is a permission pb but please any idea to solve that ??
Thanks,
Tarek Ghazali
SQL Server MVP
I get an error message when deploying reports to the reportserver from microsoft visual studio.
error message : Error rsAccessDenied : The permissions granted to user '' are insufficient for performing this operation.
TargetServerURL : http://server.com/ReportServer$sql_2005
The Report server is configured to use a custom security extension. i can access the reportserver.
It looks like when i deploy the reports from VS. it does not pass any credentials to the report server. From the error message it looks like there is no username . How do i deploy reports to report server if we are using a custom security extension. How do i grant user rights to deploy report if we are using a custom security extension. Any idea. Thanks!
chi
Hi,
I wonder if anyone can help me?
I have installed and configured sql server 2005 express edition with advanced services on an xp box, with the aim of using reporting services.
I have set up reporting services successfully using the report manager, with my web services id = netwrokservice.
I can access both the report manager and report url locally, i.e while using localhost anjd on the machine. The problem arises however when i try to access
the reports from another machine, as i get the message:
"The permissions granted to user 'domainusername' are insufficient for performing this operation. (rsAccessDenied)"
when going to for example:
"http://servername/ReportServer/Pages/ReportViewer.aspx?%2fReport1&rs:Command=Render"
I have looked at various sites (including microsoft) in an attempt to find a solution to this and most sites give exmaples of how to configure the full
version of reporting services which i do not have. The things that I have managed to gleam and try are:
- open up security on dir: C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServer to everyone and allow all access
- added my own username as a new role assigment in the report manager page
- added my own username to the reportserveruser and reportingserviceswebservicesuser roles, as indicated by microft:
http://msdn2.microsoft.com/en-us/library/ms365166.aspx, who state that "Custom authentication extensions and custom role assignments are not supported. You
must map existing Windows domain user and group accounts to predefined role definitions."
Can anyone suggest where to look next as I cannot believe that this should be this difficult?
Many Thanks in advance
Hi, I've scoured the forums and tried just about every answer to this problem without any success. What I have is SQL Server 2005 installed on a single machine, and trying to deploy reports to the same machine for testing purposes. When I try to deploy the report I receive the permissions error. Here's what I've gotten to at this point:
I can get to the reports URL (http://machine/Reports)
I can login to Reporting Services via SQL Server Management Studio as the administrator. (Windows Authentication)
I have added my login to the Home Folder-->Permissions in SQL Server Management Studio, and all reports are set to inherit the home folder's permissions
In Reporting Service Configuration Manager the Windows Service Identity is set to Local System, and for web service identity - ASP.NET Service Account is set to NT AuthorityNetworkService; Report Server and Report Manager are set to DefaultAppPool.
In IIS I tried enabling Anonymous Authentication
Current Application pools are set to "Classic" for Managed Pipeline mode (I did this to actually be able to login to Reporting Services via SQL Server management studio; having this set to integrated gives me an error)
What gets me is that this is entirely self-contained on one machine, that I set up as an administrator. So why do I get a permissions error when I am the admin on this machine deploying to this machine?
Hi,
I wanted to deploy my Sql 2005 reports to my local machine and want it to get viewed by all the users through Asp.Net application.
User can directly view the reports by clicking on the direct link to report but when they try to view it using application having Report Viewer, running on iis it gives acess denied 401 error and can't view the reports
If I make my application to run on default port then it works fine
If I give rights to <particularMachineNameASPNET> then that user can view the report but if there are 100 users then will i Add 100 such entries???
I think I am making mistake in this case.
Any response will be appriciated.
-Thanks,
Digs
i finally got SSRS(SQL Server Reporting Services) to install properly and and it was working before i had to restart my PC
after restarting my PC i went back to the Domain/Reports$SQLExpress and the menus where Blank it just showed the help link and the border. so i opened the Domain/ReportServer$SQLExpress and it said
The permissions granted to user 'DOMAINOwner' are insufficient for performing this operation.(rsAccessDenied) Get Online Help
and there is no Login Box Popping up How do i get it to Login - Its set to use Windows Authentication what sould i doo please help ive had one problem after another with this SSRS
I have granted execute on the dbo schema to a sql user so that he can execute available procedures in the dbo schema. However when he executes a procedure ie..
exec dbo.myproc
The following error is returned:
Msg 229, Level 14, State 5, Line 2
SELECT permission denied on object 'MyType', database 'Mine', schema 'dbo'.
MyType is a table
How can I correct this behavior?
I don't want the user to be able to access the tables except via the procedure calls.
Can a user be granted the ability to create stored procedures with read only capabilities? I wouldn't mind be able to UPDATE but simply need to read only.
ddave
I'm trying to deploy a project that I deployed yesterday just fine, but today I get the following error:
------ Deploy started: Project: Point Reports, Configuration: Debug ------
Deploying to http://reporting.companyname.com/reportserver
Deploying data source '/Data Sources/Srv24.FieldResponse2_1'.
The permissions granted to user 'DOMAINharley.p.bartman' are insufficient for performing this operation.
Deploy complete -- 1 errors, 0 warnings
This seems like a basic permission issue, except I'm not logged in as the user listed! I've never logged into my computer as the user. I did log in to the reporting services website yesterday as that user, but since have rebooted my machine and logged into bothe my computer and the reporting services website as me. Yesterday this report deployed fine. Today, this error message. I've even tried creating a new project and just creating a simple datasource and deploying just that, but still this message! Where is Visual Studio storing and reusing this user name during my deploy process???
I have 2 users in a database who is having dbo privilages.
I don't want them to modify data in 1 table.
How can I do that?( without removing them from dbo role)
Thanks in advance.
cheryl
Can someone tell me where user permissions for a table are stored within the
database? One of my programmers would like to access this table for the
security portion of a program he is writing.
Thank you!
Toni Eibner
Hey all,
Just trying to figure out how to set a users permission in SQL 2005. Ive got one user but I only want them to be able to view data from one or two tables or and views, but can I do this without having to deny access to every other table?
Thanks
Daniel
Hello,
Our application works this way: attaches database, modifies data and dettaches database. This works fine when user has administrative permissions, but does not work for users with standard permissions. The reason is that SSE ovewrites MDF file permissions (after MDF is attached) and then it is accessible only for Administrators, Network Service and SQLServer2005MSSQLUserxxxxx. How to avoid this behaviour? We want to keep permissions of MDF file as they are, i.e. inherited from parent folder. This becomes serious problem because some users are migrating to Vista where standard permissions are default (but the problem exists also on XP). Has SSE been designed to work in such environment?
Thank you in advance
Roman
P.S. We work with SSE SP2, BUILTIN/Users have sysadmin priviliges, problem is with file permissions of MDF. This behaviour can be easily reproduced with Management Studio - just attach MDF file and look how permissions were changed.
Question from a beginner:
I am having difficulty connecting to a SQL database from C#. There are no user signons set up on my PC and I am using windows authentication with C#. Whenever I try to connect to the data base I get a message "You do not have permission to open this database.........".
Any assistance greatly appreciated.
Steve
I have created a vb app that connects with an sql database on server express 2005.
When i install the app on my machine, i can connect and edit records no problem, but when the app is installed on other machines on the network (using windows authentication) i get this error:
SELECT permission denied on object 'tbltest', database 'test', schema 'dbo'
************** Exception Text **************
System.Data.SqlClient.SqlException: SELECT permission denied on object 'tblTest', database 'Test', schema 'dbo'.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteDbDataReader(CommandBehavior behavior)
at System.Data.Common.DbCommand.System.Data.IDbCommand.ExecuteReader(CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Test.TestDataSetTableAdapters.tblTestTableAdapter.Fill(tblTestDataTable dataTable)
at Test.Form1.Form1_Load(Object sender, EventArgs e)
at System.EventHandler.Invoke(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
Test
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///C:/Program%20Files/Default%20Company%20Name/Setup/Test.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Data
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Transactions
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
----------------------------------------
System.EnterpriseServices
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.42 (RTM.050727-4200)
CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
----------------------------------------
I think it may have something to do with user permissions for the database on sql server, but no amount of editing permissions will allow access.
Help !!!!!!
I've seriously looked, but this simple concept eludes me. How do I go about viewing all the permissions granted to a database user? Like whether or not they can execute a stored procedure.
View 1 Replies View RelatedI have a user account that needs CREATE TABLE permission in tempdb. I know how to do this using the GUI
(Enterprise Manager).
The problem is that this reverts whenever the DB server is restarted. I need to figure out
how to keep it from reverting, or it needs to be set in some sort of startup script.
Any help would be greatly appreciated.
Hi All,
Can someone tell me where the information about the permissions granted to a user are stored? For eg, user xyz in db1 has SELECT permissions on Col1, Col2, Col3 of Tab1 and UPDATE permissions on COL2 of the same table. Which system table(s) will hold this data?
I appreciate help in this regard.
Thanks !
Hi Gurus,
Is there any to get time as when DBA's grated permissions on particular database...
Please advice..
This will be very helpfull to me..
Thanks,
ServerTeam
In SQL/2000 EM I can go to a user Database, expand the Users, double click a user and click Permissions to see everything a user has permisson to in the database. How can I get the same information in Management Studio in SQL/2005? Is there an overview of this process in BOL 2005?
Thanks in advance!!!
DeWayne
Hi guys,I have been told that only users with SA priviledges could check thestatus of a job. For this reason, I had to give SA priviledges to thisuser so he could check the results of a job (succesful or not) and dohis work. Now, he makes changes on the database without telling me andlast time we nearly lost one day of work as he changed the db optionto truncate on checkpoint. I don't want to be the one to log on andverify the results of the job everyday so is there any way that I cangive him limited permissions so he could only check the job and leavethe database alone ? I am pregnant so I am afraid that next time hedoes something like that I may hit him on the head with the keyboard(hormones... :-)Any suggestions would help,Thanks !!!
View 4 Replies View RelatedI have added a new user to a database without any explicit permissions, but when I view their effective permissions inside the Microsoft SQL Server Management Studio, they have a whole host of permissions. How can this be? Is it a bug in SQL Server? Or could it be that the public role has all these permissions?
If new users are inheriting these permissions from the public role, how do I view the public role permissions?
Thanks.
hi,
I created an application using VB.NET, which performs accessto SQL database. the server is MS SQL 2000.
I got a few questions:
a. The application performs access to tables, performs SELECT transactions, and calls stored procedures. I want to define a userlogin that is only permitted to commit UPDATE and INSERT only by the stored procedures, and not by direct commands. Is that possible ? Do I have to deny access to READWRITE in the tables? If I do deny - will the user be permitted to call stored procedures that performs the INSERTUPDATE those tables ?
b. Do I have to create a LOGIN or a USER for the specified requirements ?
c. Where can I find REALLY detailed information about what I need to create (login, user, role ect.) ? I find only general stuff...
d. The user-defined role I need to create - is it considered as an application role (because it grants an application access to the database) or is it called SERVER ROLE ?
Thanks,
Dror.
I'm trying to build a web application using SQL2005 Express and Visual Studio Express. It all works OK on the local machine, but gives an error "Login failed for user xxxxASPNET" when used remotely. I can't find where I can set login permissions for SQLServer 2005 Expresss - can anyone help, please?
Thanks
John
Server: SQL 2008 R2...I would like to find an FTP user's permissions to a SQL Server.
Currently, it is set to PUBLIC on Security --> Logins-->User--Properties.
I need its permissions on all the tables, views etc.
I had found one or two other questions about this, but neither of them seemed to be the same as my instance, and there solutions were not valid for me.
I purchased the Build a Program Now MS Visual C# 2005 Express Edition book with CD.
This was installed by the auto installer on the disk. which included the SQL Express 2005 version.
I have used the Visual Express C# interface, build a small program, created the database, created tables. all went well. I can even add data, and so forth.
My problem came when I went to click on database Diagrams in the Database Explorer.
I get a Dialog box stating
" This Database does not have a valid dbo user or you do not have permissions to impersonate the dbo user, so database diagramming is not available. Do you want to make yourself the dbo of this database in order to use the database diagramming?"
two options are Yes and No.
If I choose yes, I get the following dialog box stating,
" This databse does not have a valid dbo user or you do not have permissions to impresonate the dbo user, so database diagramming is not available. Ensure the dbo account is valid and ensure you have imprersonate permission on the dbo account."
One button, OK.
I have searched every where I can think of to try to figure out how to set / alter the dbo user info / permissions.
Can someone guide me on this?
Thanks in advance.
Tom
Hi, I want to execute BCP in Query Analyser in SQL Server 2005 Express for that i surf on net and find that i should execute BCP under xp_cmdShell, That works good for addministritative account on SQL. But i want the working will be done by a non administrative account or non 'sa' user.How can i assign a non sa User permissions to execute xp_cmdShell? or just tell me any other alternative way to run BCP in Query Analyser or code behined. thanx
View 1 Replies View RelatedI use 1&1 to host my site, with SQL Server.
I've used their db management tool to create stored procs and tables.
I backed up the db stored at 1&1 and restored it on my home machine.
On my home machine, I can't access most of the db objects in the restored db via ASP.net, even if I login as sa. I get messages such as "Could not find stored procedure 'proc_name'".
1&1 provided me with a username and password to login into their SQL Server database, and all my objects now have that username as the owner.
The only way I can get the stored procs or tables to work is to prefix them all with the username from 1&1, e.g.:
exec <1&1username>.<proc_name>
Any advice would be most welcome.
Thanks,
B
Hello together,
can anybody help me. I'm looking for an easy way to grant permissions to a user in all user databases. I already have a script which grants permission to all views and userdefined tables within one database, but since I have to run it in about 100 databases it's still quite timeconsuming.
Is there a way to execute that script in all user databases at once ???
Markus
We are having problems finding out how to transfer user permissions and passwords to a new server when we copy a database.
We have tried sp_helprotect and looked at system tables to try and retrieve the details to no avail.
The reason for this is that we are trying to write an application to automate this as we have many databases to transfer.
Thanks in advance.
Ian Webb