Time Interval for hour and 30 minutes
--------------------------------------------------------------------------------
Hi Everyone
I Have column in sql server databas as "HHMMSS" and data as and i am doing a substring to get values for hours and minutes. since my calculations based on hour interval and 30 minutes interval
for ex: Now i want to show all the transaction done b/w 6 to 7 am or pn.
and for 30 minutes interval i have get the calculation as transactions done b/w 6:00 to 6:30 and 6:30 to 7:00 either it's am or pm. now how i can write my sql statements that calculates hour and 30 minutes intervals
HHMM
-------------
06:43
09:26
09:26
11:58
12:25
18:17
20:45
00:43
00:53
16:47
I have 3 requests to do and all 3 are below in SQL , i am planning to keep them as job and run on regular intervals as per request ..
1.Poll the contract approval table for no prepared new contracts. Check every 30 minutes from 9am to 10pm – 7 days a week.
IF NOT EXISTS (SELECT * FROM ContractApproval WITH (NOLOCK) WHERE ContractPrePared>DATEADD(MINUTE, -30, GETDATE())) BEGIN SEND DBMAIL ---i have this part working already END
2.Poll the contract approval table for no new signed contracts. Check every 30 minutes from 9am to 10pm – 7 days a week.
IF NOT EXISTS (SELECT * FROM ContractApproval WITH (NOLOCK) WHERE DateSigned>DATEADD(MINUTE, -30, GETDATE()) BEGIN SEND DBMAIL ---i have this part working already END
3.Poll the lead table for no new leads. Check every 5 minutes. 24/7.
IF NOT EXISTS (SELECT * FROM Lead WITH ( NOLOCK ) WHERE DateCreated > DATEADD(MINUTE, -5, GETDATE())) BEGIN SEND DBMAIL ---i have this part working already END
I am planning to keep 1,2,3, in seperate sp's and run them as JOBS....how can i achieve below a,b ?
a.The procedures should accept a parameter that indicates the interval, in minutes, that they should look back b.Each step in 3 jobs should invoke the procedures, specifying the interval with which the job runs at
I have a column of data that is the number of seconds. I need to format this column into the HH:MMS format. If there are 130 seconds the second column should read 00:02:10. How can I accomplish this in report builder or is it even possible in Report builder? I can use the following formula in SQL but is there a way to do it in Report Builder?
Hello ,I have a stored procedure that group a series of event by day. My table Tevent has a timestamp column for every event.Tevent structure:idevent| event| DatetimeEvent I just found out that I need to group the result by production shift of the day , therefore I have to group the result for everyday from 8 AM until 2 AM the next day.Any idea of how to group by time interval?Thanks
I'm trying to create a group by a set (but can change it later on) time interval. What I mean by this is the following. I would like to group my data by 5 second intervals, and perhaps have a count for it as well - but that's not required.
I have a table(work_order) with time as varchar(5).The values in table looks like thiswork_order_id rtim1 08:152 08:453 10:134 14:56and so on...I want to count how many work orders for every half an hour.The result should look like thisHours Count8 108:30 159 349:30 03and so on....really 8 hours means the work_orders issued (rtim)between 8:00 AND 8:30.Any Help is Appreciated.Thankyou.Jaidev Paruchuri
I need to add the Job Interval and Time to the following script:
SELECT DISTINCT 'CYP_BI' AS Server,Jobs.Name AS Job_Name, Jobs.description AS Alias, 'Enabled' = CASE (Jobs.enabled) WHEN 0 THEN 'No' WHEN 1 THEN 'Yes' ELSE '??' END,
[Code] .....
This query contains the job interval and time but when I add it to the first script I can't get my syntax right:
SELECT DISTINCT 'CYP_BI' AS Server, S.name AS JobName, S.description AS Alias, 'ScheduleName' = left(ss.name,25), 'Enabled' = CASE (S.enabled)
I have a table (tbl_entries) in my db that has a timestamp field (startDate). What I need to do is run a query that counts the number of records on a 15 min interval.
something like
start_date 2008-01-01 00:00:00.000 2008-01-01 00:00:00.000 2008-01-01 00:00:00.000 2008-01-01 00:01:00.000 2008-01-01 00:01:00.000 2008-01-01 00:01:00.000 2008-01-01 00:14:00.000 EVERY THING ABOVE HERE IS IN GROUP 1 2008-01-01 00:35:00.000 EVERY THING ABOVE HERE IS IN GROUP 2 2008-01-01 01:01:00.000 2008-01-01 01:03:00.000 2008-01-01 01:03:00.000 2008-01-01 01:04:00.000 EVERY THING ABOVE HERE IS IN GROUP 3 2008-01-01 01:29:00.000 EVERY THING ABOVE HERE IS IN GROUP 4 2008-01-01 01:41:00.000 EVERY THING ABOVE HERE IS IN GROUP 5 2008-01-01 02:25:00.000 2008-01-01 02:28:00.000 2008-01-01 02:31:00.000 2008-01-01 02:33:00.000 EVERY THING ABOVE HERE IS IN GROUP 6 Hope this is enough Info
I want to check a record in my table which has time ins and time outs feilds. I want to check on insertionof any new record that a new record should not be inserted on same timings and before 45 mins of timein and after 45 mins of timeout. How do i do it sql query ?
I have a simple table as shown: I want to have values on the last column to represent the time interval between the 2 date columns (visits); i.e for event-ID 2 for example, I will have
hi there i am using .net framework 1.1 with SQL 2000 . i want the data in table to get deleted automatically after 30 days of inserting data. so how do i achieve this?
I need to query data from a table which has order_date which is datetime field. How to pull orders by hour by day per month for the last 4 months. Any idea how to write the query?
if now the system time is 2014-12-23 23:45:345 . then I want to calculate the sales amount with total and get current date and current hour filter by hh:00-hh:59 , my desire output is like below :
Current time:23:50 run this query Date Time amount 2014-12-23 23:40 $10 2014-12-23 23:01 $5 2014-12-23 23:39 $5 Total :$20
I need to convert the given time into 24 hour clock .
I have the two tables out of which one contain time in 12 Hr clock and another contain time in 24 Hr clock and i need to make a join on this colum by converting 12 Hr time in to 24 hr clock time.
I'm trying to create a report which will give me a break down of how many unique vehicles have been seen between two dates via a 15 minute interval and what Lane they were seen. My current script looks like this
SELECT l.Name [Name], count(l.Name) Total, p.Created FROM PlateReads p inner join Lanes l on p.Lane_ID = l.ID where LicencePlate in (Select Plate from LPRnet_MelAir_C.dbo.TempVehiclePlates) group by Name Name being the Lane they were in and the Total being the amount of times a unique vehicle has been seen and p.Created being the date they were seen (thats what I need the interval powered off)
Ideally the output would look like this
16/03/201408:00 to 08:15Bus Lane 15 16/03/201408:00 to 08:15Elevated Road150 16/03/201408:00 to 08:15Public Pickup75
16/03/201408:15 to 08:30Bus Lane 13 16/03/201408:15 to 08:30Elevated Road120 16/03/201408:15 to 08:30Public Pickup55
All the way to 12/04/2014
I’ve got it so it says Lane and Count just can’t get the interval part
i want to show data Party Name and Time interval wise. here is my table from where i will fetch data. so pasting table data here.
Call start Call duration Ring duration Direction Is_Internal Continuation Party1Name Park_Time ------------------------- ---------------- ------------- --------- ----------- ------------ --------------- ----------- 2015/06/08 08:06:08 00:02:28 2 I 0 0 Emily 0 2015/06/08 08:16:38 00:00:21 0 I 0 1 Line 2.0 0 2015/06/08 08:16:38 00:04:13 5 I 0 0 Jen 0
[code]...
now i am not being able to cross join this CTE with my table to get data party name wise and time interval wise. say for if no data exist for a specific time interval then it will show 0 but each party name should repeat for time interval 9:00:00 - 9:30:00 upto 17:30:00. i like to add what filter need to apply to get data for incoming, outgoing, call transfer and miss call.
For Incoming data calculation where direction='I' and Is_Internal=0 and continuation=0 and RIGHT(convert(varchar,[call duration]),8)<> '00:00:00' For outgoing data calculation
ID Date Time Length Interval_Num 1 10/11/2014 9:00 420 14
Basically, length represents the # of minutes a person is scheduled for. We have 30 minute intervals. Interval_Num = (Length/30). I need the data to show each interval. For the above example it should only be 14 intervals.For the above example the solution should look like....
ID Date Time Length 1 10/11/2014 9:00 30 1 10/11/2014 9:30 30 1 10/11/2014 10:00 30 1 10/11/2014 10:30 30
I would like to make a function to convert a datetime to half-hour. E.g. If the timestamp is 1:23:05 then converts to 1:30:00, if 1:35:27 then converts to 2:00:00.
SSRS 2008 R2. I am writing a report that uses a DB4 database. Because of this many SQL commands that I normally use are not available and I don't know what commands I can use. Because of this I am doing much of my calculations inside of SSRS.
I need to round a time field to the nearest quarter hour inside of SSRS.
We have an application that has about 100 users at a time. Roughly once a day, we experience a complete slowdown on the server. All users notice it. The network seems fine because I can ping the server. Also, I can attach to drives on the server quite fast so I don`t think it`s server resources. When I manage to get in and do an sp_who, certain processes are blocking others. Talking to the users who were blocking, they were not doing anything out of the ordinary - one was even doing just a select. The error log is full of 17824 and 1608 errors. Is there some configuration setting that I should change? This is getting serious!
CREATE TABLE #Attendance( [ID] [int] IDENTITY(1,1) NOT NULL, [StudentID] [int] NOT NULL, [ClassID] [int] NOT NULL, [DateAdded] [datetime] default getdate() NOT NULL ) ON [PRIMARY]
insert into #Attendance(StudentID,ClassID,DateAdded) values(1,1,'2014-10-07 10:38:02.900')
[Code] ....
DateAdded column in first table is nothing but in and out time.
Now I want to prepare a query where I want to consider MIN DateAdded and max DateAdded and calculate the duration of student present in the class.
Validations i need to consider are:
If class is starting at 10am then student can come at 9:50am, i.e. Dateadded column should consider as student present in that class if value is less that 10 minutes of StartTime from #ClassAttendance table. Class End time i want to calculate depending upon ClassMinutes from #ClassAttendance
Also DateAdded column should be 10 minutes plus compared to calculated endtime. If its more than that consider lower DateAdded time.
And by using this thingIi want to calculate total number of minutes student present in the class and number of minutes absent.
If there is only one DateAdded for class then consider as a absent student.
i need to be able to do an sql call whereby i can check the day and hour for publishing.eg select story where day = ?? AND hour = ?? any one know the best way to do this. i need to call out date as a day number or someting and the getdate as just the hour??? anyone know how??
