How can I display 0 when using COUNT and GROUP BY?I'm using SELECT CASE in my query. I was trying to use COALESCE but no result, COUNT result = 1. (there should be 0).
COALESCE((COUNT(DISTINCT (CAST((CASE
WHEN CurrStat = @Stat AND LogDate = @LogDate THEN Enumber ELSE 0 END) AS int)))), 0) AS InTrack,
I am trying to find a count on group of our memberid`s who were active within a year since 2010 till today for particular memberships in my table I have memberid int effectivedate datetime termdate datetime Membershiptype varchar(10) ='GOLD','Silver' and 'Platinum'. I haven't used sql in a long time..
View 6 Replies View RelatedI am using SQL 2012. I have a GROUP BY and I want to select two other fields from my table at the same time: One column that is a string (account_code) and one that I need to perform a count on (customer_number). I know the code COUNT(DISTINCT customer_number) works for getting that. I need to select both of those fields on top of what I have. I have the following:
DECLARE @Providers TABLE (ID INT IDENTITY(1,1),
Provider_Name VARCHAR(20),
Uniq_Id VARCHAR(10),
Total_Spent MONEY,
Total_Earned MONEY)
INSERT INTO @Providers (Provider_Name, Uniq_Id,Total_Spent,
Total_Earned)
[Code] .....
My data is like below:
ClassId ClassName StudentId Subject SubjectId
1 ESL 12 English 20
1 ESL 13 Science 30
1 ESL 12 Social 40
1 ESL 12 Maths 50
Required output: parameters are Subject column values
ClassId ClassName TotalStudents SubjectIds
1 ESL 1 20, 40, 50
1 ESL 1 30
When one student takes multiple subjects then count student only once, so in the above data 12 is one student id takes multiple subjects so counted only once. TotalStudents value is 1
I did write below query:
Declare @subjectids string
set @subjectids = '20,30,40,50'
-- will split @subjectids and store in temp table
select classname, classid, Count(Distinct StudentId)
from mytable
where SubjectsIds in @subjectIds
group by ClassId, ClassName, SubjectId,
but it gives me below output:
ClassId ClassName TotalStudents SubjectIds
1 ESL 1 20
1 ESL 1 30
1 ESL 1 40
1 ESL 1 50
date time s-sitename TimeTaken(Seconds)
6/8/2015 10:56:26 TestSite 100
6/8/2015 10:56:26 TestSite 500
6/8/2015 10:56:26 TestSite 800
6/9/2015 11:56:26 TestSite 700
6/9/2015 11:56:26 TestSite 200
6/12/2015 12:56:26 TestSite 700
I have a table with above values, I am looking for a sql query to find AvgTimeTaken at different time stamps and total count of each time stamp
Output
date time s-sitename TimeTaken(Seconds) Count_of_Request
6/8/2015 10:56:26 TestSite 1400 3
6/9/2015 11:56:26 TestSite 900 2
6/12/2015 12:56:26 TestSite 700 1
I have an SSRS 2012 table report with groups; each group is broken ie. one group for one page, and there are multiple groups in multiple pages.
'GroupName' column has multiple values - X,Y,Z,......
I need to group 'GroupName' with X,Y,Z,..... ie value X in page 1,value Y in page 2, value Z in page 3...
Now, I need to display another column (ABC) in this table report (outside the group column 'GroupName'); this outside column itself is another column header (not a group header) in the table (report) and it derives its name partly from the 'GroupName' values:
Example:
Value X for GroupName in page 1 will mean, in page 1, column Name of ABC column must be ABC-X Value Y for GroupName in page 2 will mean, in page 2, column Name of ABC column must be ABC-Y Value Z for GroupName in page 3 will mean, in page 3, column Name of
ABC column must be ABC-Z
ie the column name of ABC (Clm ABC) must be dynamic as per the GroupName values (X,Y,Z....)
Page1:
GroupName Clm ABC-X
X
Page2:
GroupName Clm ABC-Y
Y
Page3:
GroupName Clm ABC-Z
Z
I have been able to use First(ReportItems!GroupName.Value) in the Page Header to get GroupNames displayed in each page; I get X in page 1, Y in page 2, Z in page 3.....
However, when I use ReportItems (that refers to a group name) in the Report Body outside the group,
I get the following error:
Report item expressions can only refer to other report items within the same grouping scope or a containing grouping scope
I need to get the X, Y, Z ... in each page for the column ABC.
I have been able to use this - First(Fields!GroupName.Value); however, I get ABC-X, ABC-X, ABC-X in each of the pages for the ABC column, instead of ABC-X in page 1, ABC-Y in page 2, ABC-Z in page 3, ...
select top 15 count(*) as cnt, state from table
group by state
order by cnt desc
[code[...
Can the above three queries be combined into one and still be fast, if so how?What i am trying to go is an item count, by group, similar to ones Inbox in Outlook.
HiI am new to SQL and am having a problem. I need to fix my query to do the following...2) get a total of the number of rows returned.
DECLARE @StartDate varchar(12)DECLARE @EndDate varchar(12)DECLARE @Region varchar(20)
SET @StartDate = '01/01/2002'SET @EndDate = '12/31/2008'SET @Region = 'Central'
SELECTA.createdon,A.casetypecodename,A.subjectidname,A.title,A.accountid,A.customerid,A.customeridname,B.new_Region,B.new_RegionName
FROM dbo.FilteredIncident AINNER JOIN dbo.FilteredAccount B ON A.customerid = B.accountid
WHERE (A.createdon >=@StartDate AND A.createdon <= @EndDate)AND (B.new_RegionName = @Region)AND (A.casetypecode = 2)
I'm new to MSSQL 2005 and want to get a summary of a log table. I want to count all the rows for each date based on a DATETIME field called 'post_date' that holds the date and time of each record's creation.
this is the best I can come up with:
Code:
SELECT
DISTINCT(LEFT(post_date,11)) AS post_date, COUNT(DISTINCT(LEFT(post_date,11))) AS total_posts
FROM log_directory_contacts
GROUP BY post_date
The results show each date but the count column ('total_posts') returns '1' for every row even when I know their are more than 1 record on that date.
What am I doing wrong? Thanks!
I want to display the number of records for each state in a database. I'm using a strongly types dataset. In my method, I have the followingSELECT COUNT(ID) AS iTotal, STATEFROM membersWHERE (Suspend = 0)GROUP BY STATEORDER BY STATEIn the code behind of my page I have Dim mateAdapter As New WAPTableAdapters.membersTableAdapter Dim mates As WAP.membersDataTable Dim mate As WAP.membersRow mates = mateAdapter.GetDataState For Each mate In mates Select Case mate.STATE Case "AK" LabelAK.Text = mate.ID. End Select Next What should LabelAK.Text = mate.ID. be for me to be able to display the number of records that have 'AK' in the state field?Diane
View 7 Replies View RelatedHi, I have a table that I insert a member's country into every timesomeone signs up. What I'd like to do is pull information from the DBsuch that I can see each country and the number of users from each.For example:Argentina 10Brazil 5Canada 3I'm having trouble writing the SQL for this...any suggestions?Thanks,Erik
View 2 Replies View RelatedSELECT name = SUBSTRING(name, 1, 1),
total = COUNT(SUBSTRING(name, 1, 1))
FROM products
GROUP BY SUBSTRING(name, 1, 1)
the assignment said that,
quote:"Do not display the letter and count unless at least three product names begin with the letter."
but i got the errors when I try following.
WHERE total >= 3
quote:Msg 207, Level 16, State 1, Line 4
Invalid column name 'total'.
WHERE COUNT(SUBSTRING(name, 1, 1)) >= 3
quote:Msg 147, Level 15, State 1, Line 1
An aggregate may not appear in the WHERE clause unless it is in a subquery contained in a HAVING clause or a select list, and the column being aggregated is an outer reference.
so what should I do?
How would I list the users in the users table that have duplicate IDs or count of IDs > 1?The UserName field is unique.
State UserName First Last ID City CountTX Kkeaton Kathryn Keaton 1001 Dallas 2TX KakiKeaton Kathryn Keaton 1001 Dallas 2I think I have to use a subselect? If I use group by then it won't show both records. It shows only one of them.Thanks
Craig
I need to figure out the number of managers without listing them. Label the column Number of Managers.
any help is appricated.
Number of Managers
-------------------------
6
hi
i have a database that has multiple records under the same id (each time a record is updated, it's assigned a date_value), i'm wanting one row to be generated using the data from the most recent date_value field.
a sample of the database looks something like this:
ID date_value data1 24 march info11 25 march info2
my statement looks like this:select max(date_value), data from table_name where data is not null group by id
this seems to bring up the following error for all the fields not in the group by part of the code:Column 'COLUMN_NAME' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause.
what am i doing wrong?
TIA!
I've got a report linking to a SSAS cube. It has 2 row groups Region and Country. The Country group is a subset of the Region group and works fine, it collapses and expands ok.
Now, due to a boss who doesn't like the way this looks, I have to find another way to display it. I was wondering if it is possible to have a report parameter that could be selected and the appropriate column grouping be displayed depending on the value.
i.e. User selects Report Parameter value 'Region' and the Region row group becomes visible, the Country group becomes invisible. The exact opposite happening if the user selects Country.
I can't find any obvious way to do this. Any ideas?
Rob
I would like to display all the products with maximum SeqNo from the table below:
TABLE
ProductIDSeqNoBalance
111215
11135
111420
111510
12115
1212100
121325
121445
OUTPUT
ProductIDSeqNoBalance
111510
121445
Hi,
I want to display details ection for each group in a single table using one dataset.
For ex:
Group 1 Row --> Name Age
Details 1 Row--> XXX 30
Details 2 Row--> YYY 20
Group 2 Row --> City Country
Details 1 Row--> CCC ZZZZ
Details 2 Row--> BBB AAAA
Hi, I am creating a matrix and adding multiple row groups. The problem is that I am unable to display headers for each of these groups - can anyone help??
View 6 Replies View RelatedI have to display group header inspite of not having records in that group.
Group1 [First page orgid1]
values
Group 2valuesgroup1 [Second Page orgid2]
No values group2 no values
Hi Guys,
I have a sql procedure that returns the following result when I execute it in query builder:
CountE ProjStatus
6 In Progress
3 Complete
4 On Hold
The stored procedure is as follow:
SELECT COUNT(*) AS countE, ProjStatusFROM PROJ_ProjectsGROUP BY ProjStatus
This is the result I want but when I try to output the result on my asp.net page I get the following error:
DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: DataBinder.Eval: 'System.Data.DataRowView' does not contain a property with the name Count.Source Error:
Line 271: </asp:TemplateColumn>
Line 272: <asp:TemplateColumn>
Line 273: <itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
Line 274: </asp:TemplateColumn>
Line 275: </columns>
My asp.net page is as follows:
<script runat="server">
Dim myCommandPS As New SqlCommand("PROJ_GetProjStatus")
' Mark the Command as a SPROC
myCommandPS.CommandType = CommandType.StoredProcedure
Dim num as integer
num = CInt(myCommand.ExecuteScalar)
'Set the datagrid's datasource to the DataSet and databind
Dim myAdapterPS As New SqlDataAdapter(myCommandPS)
Dim dsPS As New DataSet()
myAdapter.Fill(dsPS)
dgProjSumm.DataSource = dsPS
dgProjSumm.DataBind()
myConnection.Close()
</script>
<asp:datagrid id="dgProjSumm" runat="server"
BorderWidth="0"
Cellpadding="4"
Cellspacing="0"
Width="100%"
Font-Names="Verdana,Arial,Helvetica; font-size: xx-small"
Font-Size="xx-small"
AutoGenerateColumns="false">
<columns>
<asp:TemplateColumn HeaderText="Project Summary" HeaderStyle-Font-Bold="true" >
<itemtemplate> <%# BgColor(DataBinder.Eval(Container.DataItem, "ProjStatus" ))%> </itemtemplate>
</asp:TemplateColumn>
<asp:TemplateColumn>
<itemtemplate> <%# DataBinder.Eval(Container.DataItem, "Count" )%> </itemtemplate>
</asp:TemplateColumn>
</columns>
</asp:DataGrid>
Please help if you can Im havin real trouble here.
Cheers
I am using Query Writer (should be SQL 2005) and have included the following code.
The end result: -should retrieve columns and display the count for two different data sources that were added by personnel in a specific department.
Problem: results are returned but not accurate. The code below works just fine and returns the results for all spot buy orders added by personnel in the sales department. However, I want to add a column in the same report that also counts blanket orders from the exact same table added by personnel in the sales department. The database uses views (v) in lieu of dbo.
Parameters:
@Add_Date_From SMALLDATETIME='',
@Add_Date_To SMALLDATETIME='',
@Last_name VARCHAR(50)='',
@First_Name VARCHAR(50)=''
Query:
SELECT
T1.Last_name,
T1.First_name,
T2.Position,
T3.Add_date,
COUNT(T4.PO_Type) AS 'Spot Buy Added'
[Code] ....
If I substitute COUNT(T4.PO_Type) AS 'Spot Buy Added' with COUNT(T4.PO_Type) AS 'Blanket Added' I also get accurate results for the blanket order. IE separately they work just fine. If I try to combine the two that is where the trouble begins.
What am I doing incorrectly when I try to add the criteria/code for the additional column to count the blanket orders?
How to count the column group values and how to print the counts on every column for column group.
I used below expression to get the total column group count.
=CountDistinct(Fields!MMU.Value, "DataSet3")
I have a report that is grouped based on a field. There is no way to pre-determine the number of detail lines each group will have. Is there a way to set the print condition such that if any group details do not fit onto one page then the whole group should be printed on the next page. Something like this:
Group1
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
Group2
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
Group3
DetailLine1 -------------
DetailLine2-------------
DetailLine3------------
-
-
DetailLinen-------------
If ALL Group2 details do not fit onto the same page print it on a new page. (I don't want each group on a separate page, I just want the group detail to start on a new page IF THEY DO NOT ALL fit on one page)
I have a view created from only one table.
VW_Stats ( Tab_Name,Load_Status,User,....)
Tab_Name & Load_Status columns provides the information about Name of table and status of data getting loaded to this table.
To this I would like to add a column to display the running count in the table, I mean how many records so far loaded, as below the recordCount coming from the same table tbl_collection
Table_name Load_Status RecordCount User...
tbl_collection Running 1244 XYZ
I am writing a query to display the count of products when a month is the primary month (Month where large sales happened)..Please consider the following query..
With Member ProductRank as
Rank([Date Due].[Calendar].currentmember,TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount]))
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,bdesc) on 1 from [Sales]
Output:
It runs for 13 seconds on my laptop. I have modified the query to get the results fast like With
Set MySet as TopCount([Date Due].[Calendar].[Month],1,[Measures].[Sales Amount])
Member ProductRank as
Rank([Date Due].[Calendar].currentmember,MySet)
Member PrimaryProd as
Count(Filter([Product].[Product].[Product],[Measures].ProductRank=1))
Select PrimaryProd on 0, Order([Date Due].[Calendar].[Month],PrimaryProd,Bdesc) on 1 from [Sales]
Output:
This query runs instantly and result is not the same. Am I missing something here?
I am new to SSRS. I created a reporting services with 3 groups. I would like to know how to create different colors for each group so that all my values displayed by color group ?.
View 4 Replies View Related
The following is a simplified version of my SQL statement. I am attempting to do a simple count(*) with two groupings and a where clause. This is Select command for a GridView. However, I am unable to display zeros. The rows are completely missing and I would greatly appreciate someone's help. I have already tried Group By All, but that, unfortunately, does not work. Here is my SQL statement:
"SELECT [GENDER], [RACE], COUNT(*) FROM [TABLE] WHERE ([COLUMNNAME] ='SOMETHING') GROUP BY [GENDER], [RACE]"
Thanks for the help in advance!
Hello
I have a report that retrieves its data from Analysis Services. The data includes a count and dollar value of projects against their current status: It looks something similar to
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
In the report I hide the detail rows. I have a fixed/known number of statuses (in this case 4) and need to show all 4 in the report. eg
(group1) status1 10 $200,000
(detail) p1 1 $5,000
p2 1 $10,000
.
.
p10 1 $20,000
(group1)status2 0 $0
(group1) status3 5 $90,000
(detail) .
.
(group1) status4 15 $150,000
(detail) .
.
ie in this case I need to show status 2 (that doesn't exist in the data set) with zero totals.
Does anyone know if this is possible to get SSRS to display each of the status groups (in a known fixed list) and then match them to the records in the dataset.
As an alternative, if I were using SQL Server I could add rows to the dataset using a union statement. Is there similar functionality using mdx? My mdx skills are very basic.
Thanks
Stewart
I want to know how to merge the following data. I am using 4 queries below. I was hoping to do it with 1 query. Table1Dist Fund VAE AOVAW AOMD CourtMD JudgeCAC AOCAC CourtVAE JudgeVAE JudgeI want to join the following 3 queries:DcountAll DcountAOSelect Dist, Count(Dist)as Count from Table1 GROUP BY Table1.Dist Select Dist, Count(Dist) as Count from Table1 Where Dist='AO' GROUP BY Table1.DistDcountCourtSelect Dist, Count(Dist) as Count from Table1 Where Dist='Court' GROUP BY Table1.DistSELECT DCountAll.Dist, DCountAll.Count, DcountAO.Count AS AO, DcountCourt.CountFROM DcountCourt RIGHT JOIN (DcountAO RIGHT JOIN DCountAll ON DcountAO.Dist = DCountAll.Dist) ON DcountCourt.Dist = DCountAll.Dist;
View 2 Replies View Relatedhi everyone, I have a table: Help
A B C05/01/2008 100 1 05/01/2008 100 205/01/2008 100 205/01/2008 200 1 05/01/2008 200 2
SELECT A, COUNT(DISTINCT C) FROM help GROUP BY A
Result:1> 05/01/2008 2I need:1> 05/01/2008 4Thanks !!!
TO all SQL Gurus,
The following statement returns let say 4 records -
SELECT title, price FROM table GROUP BY title
what is the correct syntax for the statement to return the count of 4 ?
if I put ->
SELECT count (*) FROM table GROUP BY title
it'll return 1.
Thanks,
Frank
Hi everybody I have this sql code
SELECT i.infid, i.infname, i.infcalled, p.pubinfid, p.pubpub, p.publang, p.pubcount, p.pubid, n.cdpldesc
FROM info AS i INNER JOIN
pubssubscribe AS p ON i.infid = p.pubinfid INNER JOIN
newpubs AS n ON p.pubid = n.pubid
WHERE (i.infcond IS NULL)AND (p.pubid BETWEEN 30 AND 33) AND (p.pubcount > 1) AND (NOT (p.publang = '.'))
there are many records where infid appears more than once because people could subscribe in different in different publicatons.
ex.
infid pubid
1 30
1 32
1 33
2 30
etc... I want to count the infid appearing once and group it with infid
thanks