However the issue is with [1],[2],[3] columns. Those are the number of days of the month. If today is the 3rd day of the month, we only need to show 3 days. So the final table has column [1],[2],[3] and @AccountType and @Total .
We want to run this query everyday to get the moth to date values.If we run this tomorrow, it will have 4 date columns [1], [2],[3],[4] and @AccountType and @Total .
Is there a way to avoid entering column names in the excel template for me to create an excel file froma dynamic excel using openrowset. I have teh following code but it works fien when column names are given ahead of time. If I remove the column names from the template and just to Select * from the table and Select * from sheet1 then it tells me that column names donot match. Server: Msg 213, Level 16, State 5, Line 1Insert Error: Column name or number of supplied values does not match table definition. here is my code... SET @sql1='select * from table1'SET @sql2='select * from table2' IF @File_Name = '' Select @fn = 'C:Test1.xls' ELSE Select @fn = 'C:' + @File_Name + '.xls' -- FileCopy command string formation SELECT @Cmd = 'Copy C:TestTemplate1.xls ' + @fn -- FielCopy command execution through Shell Command EXEC MASTER..XP_CMDSHELL @cmd, NO_OUTPUT -- Mentioning the OLEDB Rpovider and excel destination filename set @provider = 'Microsoft.Jet.OLEDB.4.0' set @ExcelString = 'Excel 8.0;HDR=yes;Database=' + @fn exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet1$]'') '+ @sql1 + '') exec('insert into OPENrowset(''' + @provider + ''',''' + @ExcelString + ''',''SELECT * FROM [Sheet2$]'') '+ @sql2 + ' ')
I would like to compare values in the same table and get the single record with different values in the multiple columns.For table tab1, ID is my key column. If type1 is active (A) then i need to update X else blank on Code1 column and if type2 is active (A) then i need to update X else blank on code2 column. Both type1 and type2 comes from same table for same ID..Below is the example to understand my scenario clearly....
declare @tab1 table (ID varchar(20), dt date, status varchar(1), type varchar(10)) insert into @tab1 values ('55A', '2015-07-30', 'A', 'type1') insert into @tab1 values ('55A', '2015-07-30', 'C', 'type2') insert into @tab1 values ('55B', '2015-07-30', 'C', 'type1') insert into @tab1 values ('55B', '2015-07-30', 'A', 'type2')
I have 3 variables that gets comma separated values. My requirement is to get them into a temporary table with 3 columns and each column should have single value. E.g. if
Declare @SID varchar(max),@CID VARCHAR(MAX),@KID VARCHAR(MAX) Set @SID='1,2,3,4' Set @CID='6,7,8,9' Set @KID='A,BB,CCC,DDDD'
--Now my requirement is to get them in a temp table with 3 column and different rows as per comma separated values in variables.
Now my requirement is to get them in a temp table with 3 columns and different rows (as per number of comma separated values in variables) E.g.
I need write a query for removing duplicates, for Example in my table I have columns
A_ID name id 1 sam 10 2 sam 10 3 sam 10 4 sam 10 5 ccc 15 6 ccc 15 7 ccc 15 8 fff 20 9 fff 20 10 fff 20
So now I have duplicates values in id column so now I need to take only one value of each and delete the remaining. I need to take first id value 10,15,20 so only 3 rows should be there in my table.
Table2 has three columns (i.e. Date, Count and Rule Type). Column “Rule Type “has a default value which is “XYZ”..Now I want to insert Data from Table1 to Table2. I am using following query:-
Column name or number of supplied values does not match table definition.I am using SQL 2012. I understand Table1 has 2 Columns but Table2 has 3 Columns. Is there anyway, I can move data from source table to Destination table where Destination Table has more number of Columns?
Table: classes Columns: classID, hp Table: char_active Columns: name, classID, hp
The classes table is already populated.
What I want to do is insert a new row into char_active using the name and classID column, and have the HP column auto populate based on the corresponding value in the classes table. This is the trigger I wrote but I'm getting the error
Incorrect syntax near 'inserted'.
I'm new to sql, this is actually the first trigger I've tried writing.
create trigger new_hp on curr_chars.char_active instead of insert as declare @hp tinyint select @hp=lists.classes.hp from lists.classes where lists.classes.classID=inserted.classID insert into curr_chars.char_active (name, classID, hp) inserted.name, inserted.classID, @hp go
Hello,i have a table and if a record is inserted i will test a numeric valuein this table. If the this value is greather as 1 million, than anstatus column should be changed from 'A' to 'B'.Yes and sorry, this is a newbie question.On Oracle this work simple:create trigger myTrigger on tableXasbeginif :old.x 100000 then:new.y:='B'end if;end;ThanksMaik
table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process: 1. get data from an existing view and insert in temptable 2. truncate/delete contents of table1 3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted) 4. insert data in table2 which are not yet present (comparing ID in t2 and temptable) 5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
insert into #t(branchnumber) values (005) insert into #t(branchnumber) values (090) insert into #t(branchnumber) values (115) insert into #t(branchnumber) values (210) insert into #t(branchnumber) values (216)
[code]....
I have a parameter which should take multiple values into it and pass that to the code that i use. For, this i created a parameter and temporarily for testing i am passing some values into it.Using a dynamic SQL i am converting multiple values into multiple records as rows into another variable (called @QUERY). My question is, how to insert the values from variable into a table (table variable or temp table or CTE).OR Is there any way to parse the multiple values into a table. like if we pass multiple values into a parameter. those should go into a table as rows.
Basically it's converting certain row values to new column. Every PloicyNum will have 1001 to 1006 Fixed InsCode values as a group.
Rule-1: InsCode value 1001 should always mapped to 1005 InsCode value 1002 should always mapped to 1006 InsCode value 1003 should always mapped to 1004
Rule-2: For a policyNum, If any Inscode value is missed from the group values 1001 to 1006, still need to mapped with corresponding values as shown in Rule-1
In the above sample data..
for PolicyNum - 1ABC20 , group values 1003,1006 are missing for PolicyNum - 1ABC25 , group values 1002,1003,1004,1005,1006 are missing
Create Table sampleDate (PolicyNum varchar(10) not null, InsCode Varchar(4) not null) Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1001')
Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1002') Insert into Sample Date(PolicyNum, InsCode) Values ('1ABC12','1003')
I have been banging my head against the wall for TWO days. I have gone back and forth with a very patient guy on thescripts.com. You can see the ridiculous thread here
If you have time, at least peruse that so we don't go in circles. Anyway, if you guys can help me solve this, I will be forever grateful!!
Here is the "basic" problem:
Here is an example for TWO different entities in the database.
EntityID XmlFieldName Value 1 City Austin 1 State TX 1 Country US 2 CityName Los Angeles 2 StateCode CA 2 CountryCode US 2 Zip 111111
Here is how the two different results should be
where EntityID = 1 <Address City="Austin" State="TX" Country="US"/>
where EntityID = 2 <Address CityName="Los Angeles" StateCode="TX" CountryCode="US" Zip="111111"/>
Notice how the attribute names (City or CityName, State or StateCode, etc) are based off the XmlFieldName and I don't know in advance what the possible values will be? I also don't know how many attributes there will be, but they can be different per entity, depending on how they have set up an address in our application.
Another thing to note, is that I kind of have this working in an sproc using PIVOT and generating a table with the values that have the correct dynamic column names (you can see this on my other thread I posted above) but I REALLY need this to not use dynamic SQL (so can use it in a function) if possible and be able to be used in a select statement, whether it be a temp table as I would like to get a result set back that I can do a FOR XML RAW on. If this is confusing, it is because I am delerious. OR is there a way to return a table from an SPROC that has dynamic columns built?
I have variables and values stored in a table in this format
process_id | t_variable | t_value ----------------------------------------------------- 1 | Remote_Log_Server | AUSCPSQL01 ... many such rows
how to assign values to variables in SSIS?
basically i'm looking for SQL equivalent of the following query i currently use to assign values to multiple variables (in a single query)
SELECT @varRemoteLogServer=MAX(CASE WHEN [t_variable] = 'Remote_Log_Server' THEN [t_value] END) ,@varVariable2=MAX(CASE WHEN [t_variable] = 'variable2_name' THEN [t_value] END) FROM Ref_Table WHERE process_id=1
I'm trying to use merge data from a staging table to a production table. There are a lot of duplicate values for serverName and I only want to insert one instance where there are duplicates.
How I can adapt the code I have so far to achieve this?
MERGE tblServer AS TARGET USING tblTemp AS SOURCE ON (TARGET.serverName = SOURCE.serverName)
WHEN MATCHED THEN UPDATE SET TARGET.serverName = SOURCE.serverName, TARGET.serverLocation = SOURCE.serverLocation
WHEN NOT MATCHED BY TARGET THEN INSERT (serverName, serverLocation) VALUES (SOURCE.serverName, SOURCE.serverLocation)
Following SQL is to be inserted in an audit table :
INSERT INTO GLOBAL_VARIABLE_LOAD
([LOAD_ID]
,[LOAD_STATUS]
,[START_TIME]
,[END_TIME])
VALUES
(@P_LOAD_ID
,@P_LOAD_STATUS
,@P_START_TIME
,@P_END_TIME)
@P_LOAD_ID, @P_LOAD_STATUS, @P_START_TIME, @P_END_TIME are the 4 parameters mapped to global variables (At package Level) which store values mapped in a previous SQL Task in my control flow.
Following Error Message is thrown on executing the SQL Task:
Invalid object name 'GLOBAL_VARIABLE_LOAD'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Can anyone guide me as to how should I go about saving values in global variables and inserting them in a table.
The following stored procedure works well as far as it goes but I need to amend it.
@AE decimal (18,2) outputAS BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
-- interfering with SELECT statements.
SET NOCOUNT ON;
-- Insert statements for procedure here
declare@odds decimal (18,2) (SELECT @odds= sum (1/ (RacingMaster.RM_SP) ) FROM RacingMaster where RM_Draw='1')
[Code] .....
The column RM_Draw holds integer values from 1 through to 20. provide a way so that when the procedure has produced a result based on RM_Draw='1'' it will produce a separate result for RM_Draw=2 and so all the way to 20 so that the resultant figures can be outputted to my vb.net app.
When I give studentId 10 and class ids = 100, 101, 102, 103 then result should be get row from student table only if all given class ids matched.
Result: Id Student ID ClassId 1 10 100, 101, 102, 103
Case 2: Student Id: 10 class Ids = 100, 101 the no results since all the class ids for student 10 in Student_Class are not matching with the given class Ids parameter.
I've a table that has salescode(124!080) and salesamount(125.65!19.25) and I need to split the columns. Salesman(124) has commission(125.65). Here is the DDL:
USE tempdb; GO DECLARE @TEST_DATA TABLE ( DT_ID INT IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED , InvNoVARCHAR(10) NOT NULL , SalesCode NCHAR(80) NOT NULL
HiThe scenario:The price of products are determined by size.I have a Prices table that contains 3 columnsWidth Length and Price.User inputs their own width and length values as inWidth and inLength.It is unlikely that these values will exactly match existing lengths and widths in the price table.I need to take these User Input values and round them up to the nearest values found in the Prices table to pull the correct price.What is the most efficient way of achieving this?Thanks for your time.C# novice!
I have one column called ORGNAME NVarchar(34). There are two records which has the same value stored in that column"Mobile Payment Finland", in both records there are no spaces at start or end position, which mean both records are exactly same. But when i run
SELECT LEN(ORGNAME ) from table
it gives, 34 for first record and 22 for the second record. I couldnt understand what could be the exact problem.
If i use SELECT DATALENGTH(ORGNAME ) from table then i get 68 and 44
Table A(Value), which contains some strings in the column "Value"
Table B(Key,Text), which also contains strings (in the column "Text")
Now I want to find all rows in B which contain at least one string of A and create a result table X with all found rows in B. B should contain the found keys and all found substrings for this key (separated with a comma)
The solution I am looking for may not use a Cursor and may not use the CONTAIN-Statement (fulltextsearch feature)..
