Transact SQL :: How To Split Comma Delimited String
Oct 8, 2008
I have a parameter called Id in my SP which will be of nvarchar data type and i'm going to get the multiple ids at a time seperated by commas in that parameter from the application. Now my requirement is to update a table with these comma seperated ids in seperate rows.
For example, if i have 2 parameters called Id1 and Id2. Id1 will contain only one value and will be of int data type and Id2 will be of nvarchar data type as i can get multiple ids delimited by a comma from the application.
Suppose Id1 = 1 and Id2 = '1,2,3,4'. Then I have to update id2 in the tables seperately like wherever Id1 is '1' i need to update Id2 column for 4 rows with the value 1, 2, 3, 4 respectively in different rows.
how can i do this in T-SQL? How can i split the data of parameter Id2 in 4 different rows?
View 24 Replies
ADVERTISEMENT
Oct 13, 2004
I am passing in a string of dates, delimited by a comma.
So
01/01/04, 02/01/04, 03/01/04
etc
I would like to enter each of these values into a table via an INSERT stored procedure.
Does anyone have any code for this?
View 1 Replies
View Related
Jun 7, 2002
I have a row in a SQL table that has 4 numerical values, separated by comma. I'd like to take this and make it 4 separate columns. Values are not always the same length, but are always delimited by commas.
Any ideas how I could do this in T-SQL?
View 9 Replies
View Related
Oct 21, 2012
I have a stored procedure that is passed two values. Both are strings representations of GUID values, the first is a single value, the second is a comma delimited string of values.In the stored procedure I call a split function to separate the comma delimited values into a table and this is used in my WHERE clause to filter my select results.This is an example:
Code:
SELECT
item.uiGUID as ItemGUID,
stores.strStoreName as Store,
location.strLocationName as Location
FROM tblItems as item
INNER JOIN tblStoreLocations as location
ON item.uiLocationGUID = location.uiGUID
INNER JOIN tblStores as stores
ON location.uiStoreGUID = stores.uiGUID
WHERE CAST(item.uiGUID as varchar(36)) IN (SELECT Value FROM dbo.Split(',',@ItemGUIDList))
When I run this query in the management studio, passing a list of 5 values in the second parameter, my results include one item for each of the 5 values. However, when I pass the parameters from my ASP project, (I've verified the values I think are being passed are indeed being passed), I only get one item.I believe the error is in my split function. Both split functions return the same results in the SQL management studio, but only one returns the correct results in the the ASP project.
When I use this version of the function it returns the correct table values to the calling application, but it chokes when the item list does not have a trailing comma. I figure that to be a bug in the SQL function.
Code:
CREATE FUNCTION [dbo].[Split]
( @Delimiter varchar(5),
@List varchar(8000)
)
RETURNS @TableOfValues table
( RowID smallint IDENTITY(1,1),
[Value] varchar(50)
[code]....
View 7 Replies
View Related
Mar 10, 2015
I have a scenario where in I need to use a comma delimited string as input. And search the tables with each and every string in the comma delimited string.
Example:
DECLARE @StrInput NVARCHAR(2000) = '.NET,Java, Python'
SELECT * FROM TABLE WHERE titleName = '.NET' AND titleName='java' AND titleName = 'Python'
As shown in the example above I need to take the comma delimited string as input and search each individual string like in the select statement.
View 3 Replies
View Related
Oct 18, 2005
I am trying to build a dynamic where statement for my sql stored prcoedure
if len(@Office) > 0 select @strWhereClause = N'cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText( ' + @vchOffice + ',' + ''',''' + '))' + ' and ' + @strWhereClause
In this case users can enter comma delimited string in their search criteria. So if they enter we1, we2, we3 then my sql statement should look like
select @strWhereClause = cvEh.chOfficeId in (select id from dbo.csfParseDeLimitedText('we1', 'we2', 'we3'),',')
My csfParseDeLimitedText function looks like this
Create FUNCTION [dbo].[csfParseDeLimitedText] (@p_text varchar(4000), @p_Delimeter char(1))RETURNS @results TABLE (id varchar(100))ASBEGIN declare @i1 varchar(200)declare @i2 varchar(200)declare @tempResults Table (id varchar(100))while len(@p_text) > 0 and charindex(@p_Delimeter, @p_text) <> 0beginselect @i1 = left(@p_text, charindex(@p_Delimeter, @p_text) - 1)insert @tempResults select @i1select @p_text = right(@p_text, len(@p_text) - charindex(@p_Delimeter,@p_text))endinsert @tempResults select @p_text
insert @resultsselect *from @tempResultsreturnEND
My problem is it does not put quotes around the comma delimited stringso I want to put 'we1' , 'we2'. These single quotes are not coming in the dynamic sql statement. How can I modify my query so that single quotes around each entry should show up.
Any help will be greatky appreciated.
Thanks
View 1 Replies
View Related
Jun 3, 2008
Hello
I have a table with column Options where each field contains a comma delimited list of ID numbers.
I want to select any records where a certain ID number appears in that list.
So something like:
SELECT * FROM Table t1
WHERE MyID IN (SELECT Options FROM Table t2 WHERE t1.ID = t2.ID)
But that gives me the error:
Syntax error converting the varchar value '39,20' to a column of data type int.
I feel I'm close though! Could anyone point me in the right direction?
Many thanks
Square
View 3 Replies
View Related
Nov 22, 2013
I have a problem in a stored procedure trying to insert a comma delimited list into rows.The parameters for example would be somthing like....
@GarageID int = 20,
@Cars nVarChar(200) = Ford~Fiesta,BMW~320,Volvo~340,Jaguar~XJS
I need to split where the comma is for each new row, and separate each value from either side of the '~' like so....
GarageID Make Model
--------------------------------
20 Ford Fiesta
20 BMW 320
20 Volvo 340
20 Jaguar XJS
View 2 Replies
View Related
Oct 1, 2007
I have a string like say: '3:4:5:4,2:4:1,4:1:2:5:2'. Now I need to split the substrings delimited by commas. So my final output shall be
3:4:5:4
2:4:1
4:1:2:5:2
I did write a piece of code to achieve the same, but I feel its not so efficient. Can anyone suggest me a better way, if any? My code is as follows:
Declare @person as varchar(255), @cnt smallint,@loc smallint,@prevloc smallint, @str varchar(255)
Select @prevloc=0,@loc=1,@cnt=1,@person = '3:4:5:4,2:4:1,4:1:2:5:2'
While @loc != 0
begin
set @prevloc=(case when @loc = 1 then 0 else @loc end) +1
set @loc = charindex(',',@person,@loc+1)
Set @str = substring(@person,@prevloc,(Case when @loc = 0 then len(@person) - @prevloc + 1 else @loc - @prevloc end))
print 'String = ' + @Str
set @cnt=@cnt+1
end
RESULT
------
String = 3:4:5:4
String = 2:4:1
String = 4:1:2:5:2
Note: My actual purpose is to also sub split it again with ':' delimiter too. So looking for an efficient code.
View 4 Replies
View Related
Dec 8, 2006
I'm passing a comma delimited string to my SP, e.g.:"3,8,10,16,23,24"I need to retreive each number in this string and for every number found I need to execute some sode, say add "AND SportID="+numberfoundHow can I do that?
View 6 Replies
View Related
May 22, 2007
I have the following table:id name1 yes2 no3 what4 is5 this6 niceThe amount of rows can vary from 1 to 50. I only need the name column.What SQL statement do I have to execute to get the following:yes,no,what,is,this,nice, (trailing , is acceptable)Thanks!
View 1 Replies
View Related
Jul 20, 2005
Hi,I would like to parse out each value that is seperatedby a comma in a field and use that value to join to another table.What would be the easiest way to do so without having towrite a function or routine ?EX.Table AAACOL1 COL21 11, 124, 1562 11, 505, 600, 700, ...Table BBBCOL1 COL211 Desc11124 Desc124156 Desc 156
View 2 Replies
View Related
Aug 4, 2015
I am simplifying things here. Basically I have:
SELECT ......... (my selection criteria)
where Id in (@Haulers);
@Haulers is supposed to be a comma delimited list. What do I need to do to make it filter correctly?
View 13 Replies
View Related
Jul 24, 2007
I have 3 tables:tblUsersuserID int PK(...)tblSportsSportID int PK(...)tblUsersAndSports (contains the link between users and sports..a single user may have multiple entries in this table)Usercode intSportID intNow I want a stored proc that enables visitors to search on all user that have a specific sportID.The SportIDs to search on are in the var @sports as a comma delimited string,like '3,6,7'@sports may also be null (or an empty string if that is more convenient for building the SQL) when a visitor does not want to search on any of the sports a user practices, in that case no selection based on the sport criteria should be done, so ONLY filter on sports when the value of @sports is not nullpseudo code:select * from tblUserswhere if @sports not null user.sports in @sportsand username=@usernameand age=@agehelp is greatly appreciated!
View 10 Replies
View Related
Jul 30, 2007
Hello,
I have a number of multi-select parameters which I would like to send to a stored procedure within the dataset for use in the stored procedure's IN() statement which in turn is used to filter on or out particular rowsets.
I considered using a hidden string parameter set = " ' " + join(parameter.value, ',') + " ' " so that the hidden parameter would then contain a comma delimiated string of the values selected, which would then be sent on to the stored proc and used in the WHERE clause of one of the queries internal to the stored proc.
But before I start dedicating time to do this I wanted to inquire if anyone here with far more expertise could think of a faster or less system heavy method of creating a single string of comma delimited parameter selections?
Thanks.
View 3 Replies
View Related
Mar 11, 2008
I have a string
@string = 'abc,def,ghi'
Now I have to display
abc
def
ghi
I have to separate a comma in that
Is there an function like split in sql
plz help me
Thanks in Advance
Suresh Kumar
View 5 Replies
View Related
May 12, 2015
I've to write a function to return a comma delimited values from a table columns
If a table has Tab1 ( Col1,Col2,Col3).
E.g. as below ( the columnName content I want to use as columns for my pivot table
CREATE FUNCTION [RPT].[GetListOfCol]
(
@vCat NVARCHAR(4000)
)
RETURNS @PList
AS
BEGIN
SELECT @PList += N', [' + [ColumnName] +']'
FROM [ETL].[TableDef]
WHERE [IsActive] = 1
AND [Category] = @vCat
RETURN;
END;
I want out put to be as below, I am getting this output from the select query independently by declaring @Plist variable and passing @vcat value, now I want it to be returned from a function when called from a select query output ,Colum1,column2,....
View 13 Replies
View Related
Mar 6, 2014
I have a single string "XYZ00001|Test_b|XYZ00002|Test_a|XYZ00003|Test_c" that will continue to grow over time.
Is there a way I can extract the values from the string into two separate columns?
XYZ0001 Test_b
XYZ0002 Test_a
XYZ0003 Test_c
View 5 Replies
View Related
Jul 9, 2015
All I have a situation where I need to split the column to rows which is delimited using commas and semicolons. Please find the below sample data.
Data in Tables
Test1, Test2, Test3
Test4;Test5;Test6
Desired output
Test1
Test2
Test3
Test4
Test5
Test6
Is there any way that I can get this output in SQL other than using the XML Conversion, since the data has some special characters in this.
View 7 Replies
View Related
May 16, 2015
I have a table that has some comma separated values and then have another table with the lookup values. I"m not sure why it was created this way and have not had to do this. This is a vendor database so I can't go around and changing things.
Table A
IDStageIDs
188
288,86,87
388,87
Table B (Lookup table)
IDName
86test1
87test2
88test3
Expected results
StageIDsResult
88 test3
88,86,87test3, test1, test2
88,87 test3, test2
View 2 Replies
View Related
Oct 21, 2015
I have an input parameter of an SP which value will be passed with different combinations with 2 seperators (comma and pipe)
Value to the parameter is like this : '10|22|microsoft,20|25|sql,30|27|server,40|29|product'
I want output like this
Column1 Column2 Column3
10 22 microsoft
20 25 sql
30 27 server
40 29 product
Pipe separator is for column and comma separator is for row.
I know if its a single separator, it can be done with function but how to do if its 2 separators?
View 6 Replies
View Related
Sep 14, 2015
I have values in two columns separated by commas, like shown below:
I need the Output Like
How to do this in SQL server ?
View 6 Replies
View Related
Apr 24, 2015
Our front end saves all IP addresses used by a customer as a comma separated string, we need to analyse these to check for blocked IPs which are all stored in another table.
A LIKE statement comparing each string with the 100 or so excluded IPs will be very expensive so I'm thinking it would be less so to split out the comma separated values into tables.
The problem we have is that we never know how many IPs could be stored against a customer, so I'm guessing a function would be the way forward but this is the point I get stuck.
I can remove the 1st IP address into a new column and produce the new list ready for the next removal, also as part of this we would need to create new columns on the fly depending on how many IPs are in the column.
This needs to be repeated for each row
SELECT IP_List
, LEFT(IP_List, CHARINDEX(',', IP_List) - 1) AS IP_1
, REPLACE(IP_List, LEFT(IP_List, CHARINDEX(',', IP_List) +0), '') AS NewIPList1
FROM IpExclusionTest
Results:
IP_List
109.224.216.4,146.90.13.69,146.90.85.79,46.208.122.50,80.189.100.119
IP_1
109.224.216.4
NewIPList1
146.90.13.69,146.90.85.79,46.208.122.50,80.189.100.119
View 8 Replies
View Related
Nov 9, 2007
Using Flat File Connection Manager, I am specifying Text Qualifier = Double quotes{"}, and i have TXT file with one column for lastname and first name as "LN,FN", and settings are set to comma delimted, now the connectin manager is creating two different columns for LN and FN,
it was never a problem in DTS 2000.
any work around.
Thanks,
View 7 Replies
View Related
Jul 2, 2005
I want to allow visitors to filter a list of events to show only those belonging to categories selected from a checklist.
Here is an approach I am trying:
TABLE Events(EventID int, Categories varchar(200))
EventID Catetories
--------------------------
1 ‘6,8,9’
2 ‘2,3’
PROCEDURE ListFilteredEvents
@FilterList varchar(200) -- contains ‘3,5’
AS
SELECT EventID FROM Events
WHERE (any value in Categories) IN @FilterList
Result:
EventID
----------
2
How can I select all records where any value in the Categories column
matches a value in @FilterList. In this example, record 2 would be
selected since it belongs to category 3, which is also in @FilterList.
I’ve looked at the table of numbers approach, which works when
selecting records where a column value is in the parameter list, but I
can’t see how to make this work when the column itself also contains a
comma delimited list.
Can someone suggest an approach?
Any examples would be greatly appreciated!
Gary
View 3 Replies
View Related
May 18, 2015
DECLARE @FullName VARCHAR(100)
SET @FullName = 'Vauxhall Adam Rocks AIR Vauxhall'
SELECT LEFT(@FullName, NULLIF(CHARINDEX(' ', @FullName) -1, -1)) AS [FirstName],
RIGHT(@FullName, ISNULL(NULLIF(CHARINDEX(' ', REVERSE(@FullName)) - 1, -1), LEN(@FullName))) AS [LastName]
This is only gives first and last not first and middle
DECLARE @FullName VARCHAR(100)
SET @FullName = 'Vauxhall Adam Rocks AIR Vauxhall'
SELECT
STUFF(@FullName,charindex(' ',SUBSTRING(@FullName,5,LEN(@FullName)))+5,LEN(@FullName),'') [Firstname1],
STUFF(@FullName,1,charindex(' ',SUBSTRING(@FullName,5,LEN(@FullName)))+4,'') Lastname1
Not right as it gives
Vauxhall
Adam Rocks AIR Vauxhall
Ideally the result should be
Vauxhall
Adam Rocks AIR
View 6 Replies
View Related
Jul 17, 2015
I am using SQL Server 2008. I have strings like this:
AB-123
CDW-32
declare @First_Part varchar(3)
declare @Second_Part varchar(5)
I want to split the string with delimiter '-' and store as first part and second part.
I saw few sample functions to split a string but these return table of values.
I simply want first part and second part.
In above examples context:
@First_Part = 'AB'
@Second_Part = '123'
Any simple way to do this?
View 6 Replies
View Related
Jun 11, 2015
How I can split the half hour in number from this string?
20130329070000 (it's varchar)
Easy for the date
cast (left(20130329070000,8)as date)
I can achieve even the Half Hour
select
left(SUBSTRING('20130329070000',9,4),2)+':'+RIGHT(SUBSTRING('20130329070000',9,4),2)
But what I need is the Half Hour in numeric format, so 00:00
should be 1, 00:30 should be 22, 01:00
should be 3, 01.30 should be 4......23:30 should be 24.
I already did but I can't find the piece of code I used.
View 5 Replies
View Related
Aug 20, 2015
I have a string ,want to split the values after every space as column value and insert them into a table
1306453 0 0 0 0 0
col1 col2 col3 col4 col5 col6
1306453 0 0 0 0 0
View 7 Replies
View Related
Jun 23, 2006
Hi,
Good evening! I have a problem. I have a namelist coming from a distribution list of an active directory. When I converted it to csv file, the members reside in just one column and separated by a comma. I want the names to be separated in a row one by one. I tried it on excel and I used the transpose column but to no avail. My last resort is to import it on sql but the names on the column was cut and not complete. Do you have any idea how to do this. Your help is highly appreciated.
this is the sample file..
names
kelly.yap, lizzy.fox, yahoo, finance.dep, hope.miller, porly.john
the maximum names in a row is 566.
thanks in advance.
myBU
View 2 Replies
View Related
Aug 11, 2004
Would like to have a view created to display the result at the bottom of this message. We will be using Dreamweaver to display the information from this view. Also, for the record, we are using sql 2000. Any help would be greatly appreciated.
tblservers
servid servername
1 server1
2 server2
3 server3
tblapplications
appid appname
1 app1
2 app2
3 app3
tblapplink
id appid servid
1 1 1
2 1 2
3 1 3
4 2 1
5 2 3
6 3 1
we want to display this information as below:
appname serverlist
app1 server1, server2, server3
app2 server1, server3
app3 server1
Thank you very much,
mrtwo
View 2 Replies
View Related
Dec 28, 2006
Suppose I have a table named Test (referred in the query below)
Category Indicators
ctgy1Y,,,,
ctgy2Y,Y,Y,N,
ctgy3,Y,,Y,
and If I would like to transform this table to
Category Indicators
ctgy1Y
ctgy2Y
ctgy2Y
ctgy2Y
ctgy3Y
ctgy3Y
I am able to do it using the logic below
CREATE TABLE dbo.Numbers (Number INT IDENTITY(1,1) PRIMARY KEY CLUSTERED)
WHILE COALESCE(SCOPE_IDENTITY(), 0) < 5
BEGIN
INSERT dbo.Numbers DEFAULT VALUES
END
SELECT category,
SUBSTRING( Value, Number, CHARINDEX( ',', Value + ',', Number ) - Number ) as program
FROM Test
inner
JOIN Numbers
ON SUBSTRING( ',' + Value, Number, 1 ) = ','
and CHARINDEX( ',', Value+',', Number ) - Number <> 0
where Number <= Len(Value) + 1
But I would like to Transform this table into something like the one below (where if 'Y' before 1st comma then Q1, if 'Y' Before 2nd comma then Q2 and so on
Category Indicators
ctgy1Q1
ctgy2Q1
ctgy2Q2
ctgy2Q3
ctgy3Q2
ctgy3Q4
What is the best and efficient way to obtain this? Any help will be greatly helpful.
Thanks
Ram
View 4 Replies
View Related
Apr 2, 2007
I need to import comma delimited text files into sql tables. in one of the column, there is a comma in the string itself. e.g.
Cust_ID Name Phone Address1 Address2
Date that I have:
001,juia, anderson,4694568855,,Cedar Spring
The data does not have double quote as text qualifiers. but as you see, on the Name column, there is a comma, which is not a delimiter. can anybody give any suggestions on how i can deal with that? i would appreciate it so much.
thanks
View 2 Replies
View Related
