I am trying to spilt records into days by the start - End datetime.
I would send an image and data but because I am new to the forum, I am blocked sending images.
"Body text cannot contain images or links until we are able to verify your account"
How I can forward an image.
I have values in two columns separated by commas, like shown below:
I need the Output Like
How to do this in SQL server ?
I have the following query
WITH summary AS
(SELECT tu.SequenceNumber,
tu.trialid,
tu.SBOINumber,
tu.DisplayFlag,
[Code] ....
I am having trouble with the RowNumber Over Partition By portion of the query. I would like the query to return only the first occurrence of each sboinumber in the table for each trial id. It is only giving me the first occurrence of each sboinumber. I tried including the trialid in the partition by clause, but that is not working.
Sample Data
SequenceNumber TrialID SBOINumber
1 1 5000
2 1 5000
3 2 5000
4 2 5000
5 1 5001
6 3 5001
7 3 5001
Should return SequenceNumber 1 and 3, 5, 6
SOURCE TABLE
ID DESCRIPTION
1 I am a programmer
2 I am a doctor
Destination Table
ID LINE DESCRIPTION(Varchar10)
1 1 I am a pro
1 2 grammer
2 1 i am a doc
2 2 tor
Please someone help me on this.
I have a string ,want to split the values after every space as column value and insert them into a table
1306453 0 0 0 0 0
col1 col2 col3 col4 col5 col6
1306453 0 0 0 0 0
I have a field in a table that contains addresses e.g
15 Green Street
5F Brown Steet
127 Blue Street
1512 Red Road
I want to output the numbers into one column and the address to another column as i need to produce a report that only shows streets and roads but no numbers.
So basically no matter how many characters before the first space which can be numbers or letters i want these output into two columns.
All I have a situation where I need to split the column to rows which is delimited using commas and semicolons. Please find the below sample data.
Data in Tables
Test1, Test2, Test3
Test4;Test5;Test6
Desired output
Test1
Test2
Test3
Test4
Test5
Test6
Is there any way that I can get this output in SQL other than using the XML Conversion, since the data has some special characters in this.
equipmentid downtimestartdate downtimeenddate dowtime
a3er 2015-03-15 02:00 2015-03-17 23:00 69
b6e4 2015-03-18 13:00 2015-03-20 04:00 39
i have many rows(in our production table, thousands of rows are there) like above in a table and i want like below output(in output total 6rows only)
equipmentid downtimestartdate downtimeenddate dowtime
a3er 2015-03-15 02:00 2015-03-15 24:00 22
a3er 2015-03-16 00:00 2015-03-15 24:00 24
a3er 2015-03-17 00:00 2015-03-15 23:00 23
[code]...
I have a string that contains series of parameters with separators.i need to split the parameters and its values as rows and columns.e.g string = "Param1 =3;param2=4,param4=testval;param6=11;..etc" here the paramerter can be anything and in any number not fixed parameters.
Currently am using the below function and getting the parameters by each in select statement as mentioned below.
select [dbo].[rvlf_fn_GetParamValueWithIndex]('Param1=3;param2=4,param4=testval;param6=11;','param1=',';') as param1,
[dbo].[rvlf_fn_GetParamValueWithIndex]('Param1=3;param2=4,param4=testval;param6=11;','param2=',';') as param2
CREATE FUNCTION [dbo].[rvlf_fn_GetParamValueWithIndex]
(
@CustomProp varchar(max),
[code]....
declare @var varchar(8000)
set @var='Name1~50~20~50@Name2~25.5~50~63@Name3~30~80~43@Name4~60~80~23'
---------------------
Create table #tmp(id int identity(1,1),Name varchar(20),Value1 float,Value2 float,Value3 float)
Insert into #tmp (Name,Value1,Value2,Value3)
Values ('Name1',50,20,50 ), ('Name2',25.5,50,63 ), ('Name3',30,80,43 ), ('Name4',60,80,23)
select * from #tmp
I want to convert to @var to same like #tmp table ..
"@" - delimiter goes to rows
"~" - delimiter goes to columns
I have a view in my database detailing the expiry date of each credential for each employee. The view is designed as to display one record per employee and in that record is the expiry date of each credential and the days remaining. So the columns are as follows:-
Employee CodeExpiry Date (x8 columns) (named as credential e.g. [Passport])
Days Remaining (x8 columns) (named as "TS_" + Credential)
I'm trying to use the CASE function to compare each DATETIME column with one another and retrieve the minimum. How can I return the minimum date as a run-time column and sort the view by this column? My code is as follows:-
SELECT [Passport],[TS_Passport],[Visa],[TS_Visa],[Civil_ID],[TS_Civil_ID],[KOC_Pass],[TS_KOC_Pass],[JO_Pass],[TS_JO_Pass],
[Ratqa_Pass],[TS_Ratqa_Pass],[Driving_License],[TS_Driving_License],[Health_Book],[TS_Health_Book], CASE
WHEN Passport <= Visa AND Passport <= Civil_ID AND Passport <= KOC_Pass AND Passport <= JO_Pass AND
[code]....
I've been told that this is the most efficient given the number of records in my database. The Min_Date is always NULL. I need the minimum of the 8 dates to be the Min_Date.
I have a TableA where data get inserted from Excel(IMPORT/EXPORT wizard)
TableA;
ID(identity) Date (NOT NULL Defaulyt Getdate() )
Name Phone
1 2014-06-17 17:28:21.190
Nick 12345678910
2 2014-05-17 17:28:21.190
Stan 00045678910
3 2015-08-17 17:28:21.190
Kim 11111678910
4 2015-08-17 17:28:21.190
Tom NUll
3,4 are the rows i have inserted now , you can see by date, likewise i have 100,000 rows(old and new combination) and now the data from excel to TableA can be imported/exported daily , hourly, weekly basis.
Now i want to find out only the rows which are imported to tableA today, or hours back, or yesterday .....
the reason is ,
Step1:get data from excel and import to tableA( this is a manual Step) and i know when the data is inserted with exact date and time.
Step2: get newly inserted rows from TableA and pass them as Parameters in Stored Procedure.( i may run step 2 after 1 hour, or after 1 day or after 1 week ,but i want only rows that are inserted )
I tried with using where Datecreated, but did work.
Hello All,
I am using SQL 2005 SP2. I have a table partitioned on date range. I am trying to SWITCH, MERGE and SPLIT partitions.
My SWITCH and MERGE work great. When the SPLIT query is executed, an error 9002 is thrown....
"The transaction log for database is full. To find out why space in log cannot be resued, see log_reuse_wait_desc column in sys.databases."
Below are more details...
- All SWITCH, MERGE and SPLIT are executed in one TRANSACTION.
- After SWITCH and MERGE, I execute a query set the partition scheme "NEXT USED [PRIMARY]".
- Finally i execute SPLIT statement.
Could you please tell me where am I going wrong?
Any help would be appreciated.
Thanks..................
How can I convert the following data
Create Table tbl_Customer_Bank_Details
(
[CustomerID] int,
[CustomerName] varchar(50),
[AccountType] varchar(50),
[BankAccountNo] varchar(50)
)
[Code] ...
into the following format
Create Table tbl_Customer_Bank_Details2
(
[CustomerID] int,
[CustomerName] varchar(50),
[AccountType] varchar(50),
[BankAccountNo1] varchar(50),
[Code] ....
I am looking at this [URL]
how to do this in SQL 2000.
i have a table with dob and test results , i am trying to pull the data from the table and converting rows columns , below is the table i am using . i used to pivot to do this .
create table #TEST_RESULTS
(ID INT,NAME VARCHAR(10),DOB DATETIME,DAYS_SINCE_BIRTH_TO_TEST INT,TEST_RESULTS INT )
INSERT INTO #TEST_RESULTS
VALUES(1,'A','2015-01-01' , 0 ,1)
,(1,'A','2015-01-01' , 0 ,1)
,(1,'A','2015-01-01' , 1 ,3)
,(1,'A','2015-01-01' , 2 ,6)
[code]...
Hi
I am trying to implement a sliding window on a table in SQL Server 2005 but i am having some problem.
I have two tables, "Letture" and "LettureStorico". The first one receives data on a few seconds basis, some thousands of rows each day. The second is the historical record and should store all the records till midnigh of two days before, that is, if today is November 21st, LettureStorico stores rows till November 19th 23.59:59.997.
At some time during morning of each day i want to run a stored procedures that takes the records older than midnight of two days before in "Letture" and switch them as a partition in "LettureStorico"
Here's what i do:
/*----------------------------------------------------------*/
CREATE PARTITION FUNCTION [partizioneLive](datetime) AS RANGE LEFT FOR VALUES (N'2006-11-15 00:00:00')
CREATE PARTITION FUNCTION [partizioneStorico](datetime) AS RANGE LEFT FOR VALUES (N'2006-11-15 00:00:00')
CREATE PARTITION SCHEME [schemapartizioneLive] AS PARTITION [partizioneLive] ALL TO ([PRIMARY])
ALTER PARTITION SCHEME [schemapartizioneLive] NEXT USED [PRIMARY];/*(1)*/
CREATE PARTITION SCHEME [schemapartizioneStorico] AS PARTITION [partizioneStorico] ALL TO ([PRIMARY])
ALTER PARTITION SCHEME [schemapartizioneStorico] NEXT USED [PRIMARY]; /*(1)*/
CREATE TABLE [dbo].[Letture](
[IdLettura] [bigint] IDENTITY(1,1) NOT NULL,
[IdTag] [int] NOT NULL,
[IdGatewayBox] [int] NOT NULL,
[IsEntrata] [bit] NOT NULL,
[Data] [datetime] NOT NULL,
[IsRettifica] [bit] NOT NULL,
CONSTRAINT [PK_Letture] PRIMARY KEY CLUSTERED
(
[Data], [IdLettura] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON schemaPartizioneLive(data)
) ON schemaPartizioneLive(data)
ALTER TABLE [dbo].[Letture] WITH CHECK ADD CONSTRAINT [CK_Letture] CHECK (([Data]>='20061115 00:00'))
CREATE TABLE [dbo].[LettureStorico](
[IdLettura] [bigint] IDENTITY(1,1) NOT NULL,
[IdTag] [int] NOT NULL,
[IdGatewayBox] [int] NOT NULL,
[IsEntrata] [bit] NOT NULL,
[Data] [datetime] NOT NULL,
[IsRettifica] [bit] NOT NULL,
CONSTRAINT [PK_LettureStorico] PRIMARY KEY CLUSTERED
(
[Data], [IdLettura] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON schemaPartizioneStorico(data)
) ON schemaPartizioneStorico(data)
ALTER TABLE [dbo].[LettureStorico] WITH CHECK ADD CONSTRAINT [CK_LettureStorico] CHECK (([Data]<'20061115 00:00'))
/*----------------------------------------------------------*/
Every morning i run a stored procedure that, after dropping the check constraints (i'll recreate the at the end), does the following:
/*-----------------------------------------------------------*/
SET @NewBoundary = dateadd(dd,-1, @dateOfToday)
--this new partition contains the rows i want to switch
ALTER PARTITION FUNCTION PartizioneLive() SPLIT RANGE (@NewBoundary)
--this new partition is empty
ALTER PARTITION FUNCTION PartizioneStorico() SPLIT RANGE (@NewBoundary)
--this works fine, rows are moved
ALTER TABLE Letture SWITCH PARTITION 2 TO LettureStorico PARTITION 2
--these two merges lead to two tables partitioned in two partitions each
ALTER PARTITION FUNCTION PartizioneLive() MERGE RANGE (@OldBoundaryLive)
ALTER PARTITION FUNCTION PartizioneStorico() MERGE RANGE (@OldBoundaryStorico)
/*------------------------------------------------------------*/
Till now, everything is working as expected.
Now, when i try to run the same Stored Procedure " a day later" (NewBoundary moved on 1 day) i receive, when i do the "ALTER PARTITION FUNCTION PartizioneLive() SPLIT RANGE (@NewBoundary)" i receive a 7707 error message:
"Msg 7707, Level 16, State 1, Line 1
The associated partition function 'PartizioneLive' generates more partitions than there are file groups mentioned in the scheme 'schemapartizioneLive'."
How is this possible if i used the "ALL TO [PRIMARY]" and specified which file to use next as in (1) ? Why all this succeeds the first time (when i have 3 partitions) but not the second (again i have just three partitions, i checked) ?
Someone can help me on this, please ?
Many thankx
Wentu
I have a table with 100 rows, 1 field (ID), and I would like to write a query to output it as 4 rows, and 25 columns.
Row data
ID
1
2
3
4
5
6
7
8
9
...
98
99
100
Output will be like
c1 c2 c3 c4 c5....
1 5 9 13
2 6 10 14
3 7 11 15
4 8 12 16
I have persons who speaks multiple languages and they are in one table, each row is added if he/she speaks multiple languages. Instead I want to add additional columns and load the data.(what I have shown in the desired output)
name language
-------------
ron english
ron french
ron spanish
andy english
andy hindi
kate english
Desired output
name language1 language2 language3 language4 language5 language6
-----------------------------------------------------------------
ron english french spanish
andy english hindi
Kate english
I need to pivot my records in columns into rows. Here is sample data:
create table #columnstorows
(
Payer varchar (5),
ID varchar (5),
ClM varchar (2),
Paid1 float,
Paid2 float,
Paid3 float
)
[code]....
Desired result:
Payer1 Payer2
ID1 ID2
Paid1A Paid1B
Paid2A Paid2B
Paid3A Paid3B
U001 U002
001 002
76.58 19.53
153.48 96.43
53.48 200
Here is the table:
empid lastname firstname title titleofcourtesy ModifiedOROriginal
1 Davis1 Sara CEO Ms. Modified
1 Davis Sara CEO Ms. Original
We need an output like this:
empid
1
1
lastname
Davis1
Davis
firstname
Sara
Sara
title
CEO
CEO
titleofcourtesy
Ms.
Ms.
ModifiedOROriginal
Modified
Original
That may not be the most exact TITLE I have used for a question as CASE may not be the best expression to use but I have a query:
select AR.ClientID,
AR.ReferenceID,
AAC.SequenceID,
AA.AppearanceDate,
CASE
WHEN AAC.Outcome IS NULL Then 'Cancelled' else
[Code]....
This returns the following data set:
ClientID ReferenceID
SequenceID AppeareanceDate
Outcome Rownum
1000000 2
2000358 2005-11-07
Yes 1
[Code] ...
What I want the eventually solution to be is that for each unique/distinct client, reference and sequence there is one record (row). Based on the row_number, I want the first 'AppearanceDate' renamed to 'AppearanceDate1' with the first AppearanceDate as the data and the first Outcome to be renamed 'Outcome1' with the first Outcome as the data. Any subsequent rows would follow as columns:
ClientID ReferenceID
SequenceID AppeareanceDate1
Outcome1 AppearanceDate2
Outcome2
1000000 2
2000358 2005-11-07
Yes NULL
[Code] ...
Only four AppearanceDates and outcomes are required based on the unique/distinct Client, Reference and SequenceIDs. How I can loop through the Appearances based on the row_number and show each record in one row?
I have a table and one of the column have tab delimited value and I need to separate the tab delimited values and keep them in separate rows.
ID Name State Country
1 Scott, Ricky NSW AUS
2 Martin VIC AUS
3 James, Peter,John WA AUS
ID column is not a primary key. I want the output columns to identify the comma (,) and put them in separate rows as below
ID Name State Country
1 Scott NSW AUS
1 Ricky NSW AUS
2 Martin VIC AUS
3 James WA AUS
3 Peter WA AUS
3 John WA AUS
How to strip the camma(,) in SQL?
i have following table columns and i want to convert these all columns into row
SELECT [CASHINHAND]
,[CASHATBANK]
,[DEPOSITS]
,[ACCRECEVABLE]
,[SUNDRYDEBTORS]
,[LOANANDADVANCES]
[Code] ....
required output looks like
CASHINHAND 118950
CASHATBANK 200
DEPOSITS 3000
ACCRECEIVABLE
25000
Using the following tables and data---
CREATE TABLE tblRiskReviewHistory(RiskReviewID int, RiskReviewHistoryID int, Name nvarchar(20), Description nvarchar(50), Date date)
INSERT tblRiskReviewHistory(RiskReviewID, RiskReviewHistoryID, Name, Description, Date)
VALUES(1,1,'Customer A','Profile Assessment','01/01/2015'),
(1,2,'Customer B','Profile Assessment','02/20/2015')
[Code] ...
And currently outputs;
Name Description Date Question Answer
Customer A Profile Assessment 01/01/2015
How complex is the structure?
Customer A
Profile Assessment
01/01/2015
The total value of assets?
Less than GBP 1 million
Customer A
Profile Assessment
01/01/2015
The volume of transactions undertaken?
Low (-1 pmth)
[Code] ....
However, I would like it to output;
Name
Description
Date
How complex is the structure?
The total value of assets?
The volume of transactions undertaken?
How was the client introduced?
Where does the Customer reside?
[Code] ....
The number of questions are unknown for each RiskReviewID and they can be added to in the future.
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
how to do a check for 2 columns. As long as there is data for at least one of the columns I want to return rows.
Example Data
create table test
(
ID int,
set1 varchar(50),
set2 varchar(50),
[code]....
Below. I have also pasted the current result of this query and the desired result.
Query can be updated to get the desired result as given below?
Query:
Select c.OTH_PAYER_ID, c.PAID_DATE, f.GROUP_CODE, f.REASON_CODE, f.ADJUSTMENT_AMOUNT
From MMIT_CLAIM_ITEM b, mmit_tpl c , mmit_attachment_link d, MMIT_TPL_GROUP_RSN_ADJ f
where b.CLAIM_ICN_NU = d.CLAIM_ICN and b.CLAIM_ITEM_LINE_NU = d.CLAIM_LINE_NUM and c.TPL_TS = d.TPL_TS and f.TPL_TS = c.TPL_TS and b.CLAIM_ICN_NU = '123456788444'
Current Result which I am getting with this query
OTH_PAYER_ID PAID_DATE GROUP_CODE REASON_CODE ADJUSTMENT_AMOUNT
5501 07/13/2015 CO 11 23.87
5501 07/13/2015 PR 12 3.76
5501 07/13/2015 OT 32 33.45
2032 07/14/2015 CO 12 23.87
2032 07/14/2015 OT 14 43.01
Desired/Expected Result for which I need updated query
OTH_PAYER_ID PAID_DATE GROUP_CODE_1 REASON_CODE_1 ADJUSTMENT_AMOUNT_1 GROUP_CODE_2
REASON_CODE_2 ADJUSTMENT_AMOUNT_2 GROUP_CODE_3 REASON_CODE_3 ADJUSTMENT_AMOUNT_3
5501 07/13/2015 CO 11 23.87 PR 12 3.76 OT 32 33.45 2032 07/14/2015 CO 12 23.87 OT 14 43.01
Using DB2.
Can I ask how to split the dataset into training and validation when running descision tree model?
we can easily load a file into db tables. However, my main concern here is the number of columns in the file. A text file TEXT_1400.txt has 1400 columns. I am unable to load data to my db table using BCP or BULK INSERT commands, as maximum of 1024 columns are allowed per table in SQL Server 2008.
We can still go ahead and create ‘Wide Table’ (a special table that holds up to 30,000 columns. The maximum size of a wide table row is 8,019 bytes.). But when operating on wide table, BCP/BULK INSERT commands still fail. After few hours of scratching my head over BCP and BULK INSERT, I observed that while inserting BCP/BULK INSERT commands are unable to identify SPARSE columns and skip these columns, which disturbs column mapping and results in data conversion and trancation errors.
Is there any proper way to load this kind of files into the db table?
Is it possible to partition an existing table on a foreign key (datetime) column? Also would partition switching work?
View 0 Replies View RelatedI have a table with single row like below
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Column0 | Column1 | Column2 | Column3 | Column4|
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Value0 | Value1 | Value2 | Value3 | Value4 |
Am looking for a query to convert above table data to multiple rows having column name and its value in each row as shown below
_ _ _ _ _ _ _ _
Column0 | Value0
_ _ _ _ _ _ _ _
Column1 | Value1
_ _ _ _ _ _ _ _
Column2 | Value2
_ _ _ _ _ _ _ _
Column3 | Value3
_ _ _ _ _ _ _ _
Column4 | Value4
_ _ _ _ _ _ _ _
If I have the first two columns from a SQL query and would like to create the third (row):
personid new_commsstream row
1 0 1
1 0 1
1 0 1
1 1 2
1 0 2
2 0 1
3 0 1
4 0 1
5 0 1
5 1 2
5 1 3
Is this possible? I have tried using row over partition but I'm not sure how group it correctly, so basically every time there is a new 1 in new_commsstream within a personid the row number goes up by one.
I have a table with 3 columns (ID Int , Name Varchar(25), Course Varchar(20))
My source data looks like below
ID Name Course
1 A Java
1 A C++
2 B Java
2 B SQL Server
2 B .Net
2 B SAP
3 C Oracle
My Output should look like below...
ID Name Course(1) Course(2) Course(3) Course(4)
1 A Java C++
2 B Java SQL Server .Net SAP
3 C Oracle
Basically need t-sql to Convert non fixed rows to non fixed columns...
Rule: IF each ID and Name have more than 1 course then show it in new columns as course(1) course(2)..Course(n)
Create SQL:
Create table Sample (ID Int null , Name Varchar(25) null, Course Varchar(20) null)
Insert SQL:
INSERT Sample (ID, Name, Course)
VALUES (1,'A','Java'),
(1,'A','C++'),
(2,'B','Java'),
(2,'B','SQL Server'),
(2,'B','.Net'),
(2,'B','SAP'),
(3,'C','Oracle')