I want to insert the data from temp table to other table. Only condition is, it needs to sorted based on tool number and tool date. For example if we have ten records for tool number 1000, it should be order by tool number and then based on tool_dt. Both tables doesn't have any primary keys. Please find below my code. I removed all the unnecessary columns for simple understanding. INSERT INTO tool_summary  (tool_nbr, tool_dt) select tool_nbr, tool_dt from #tool order by tool_nbr, tool_dt...But this query is not working as expected. Data is getting shuffled.
I have 2 tables: Source Table - IncidentDimNew and Destination Table - IncidentDimNew with identical columns: Id and CreatedDate but the data is different.
I would like to insert distinct data from those 2 columns of 1st table into the same 2 columns into the 2nd table but I onlt want to replace the values in the 2nd table where the Created Date is > 2015-04
I compiled the code in order to get the information I want from 2 tables:
Source Table SELECT COUNT(Id), LEFT(CONVERT(VARCHAR(10)), CreatedDate, 126), 7) FROM IncidentDimNew
[Code] ...
This is the code I wrote in order to do it             INSERT INTO IncidentDim [Id]    ,[CreatedDate]    SELECT [Id] ,[CreatedDate]
FROM IncidentDimNew
where left(CONVERT(VARCHAR(10), CreatedDate, 126),7) > '2015-04'
GO
But what it does it's gives the SUM of the values in the corresponding rows where the values are not null which I don't want.
So  how do I leave the values as is from table IncidentDim and insert new values as it is from IncidentDimNew where the Created Date is > 2015-04?
we have a table in our ERP database and we copy data from this table into another "stage"Â table on a nightly basis. is there a way to dynamically alter the schema of the stage table when the source table's structure is changed? in other words, if a new column is added to the source table, i would like to add the column to the stage table during the nightly refresh.
create table #datatable (id int, name varchar(100), email varchar(10), phone varchar(10), cellphone varchar(10), none varchar(10) ); insert into #datatable exec ('select * from datatable where id = 1') select * from #datatable
I still want to retrieve the data and present it in the software's presentation layer but I still want to remove the temp table in order to reduce performance issue etc.
If I paste the code DROP
TABLE #datatable after insert into #datatable exec ('select * from datatable where id = 1')
Does it gonna work to present the data in the presentation layer after removing the temp table?
The goal is to retrieve the data from a stored procedure and present it in the software's presentation layer and I still need to remove the temptable after using it because I will use the SP many time in production phase.
Hello Room, M stuck with an issue with SQL Query. My requirement is to create a temporary table with the out put of "SELECT" Clause..........
Like....... SELECT NC_ID, AUD_PLAN_ID, AUD_CLAUSE_ID FROM AUD_NC
This is my "Select" Query and all I want is to store the out put in a #table. Now one way is to craete #tmp_table with the fields same as the out put column of the "SELECT" Clause......... But I want it in direct fashion.... dat means without Creating the #tmp_table directly...........
I tried with "CREATE TBALE #tmp_table AS SELECT NC_ID, AUD_PLAN_ID, AUD_CLAUSE_ID FROM AUD_NC".......... But it dini work
I have started working on SSAS since last week, I need to perform some calculations on the data fetched from the cube based on the parameters. SSRS is used to display the output and SSAS is used as a data source.
How i could perform the operations on the data fetched from the cube in SSAS? Does SSAS provides the storage structure like temp table in stored procedure where we can perform the various operations before sending final data back to the client side tool(SSRS)?
OR Is there any alternative way to perform the operations based on the input provided through the parameters
Hi, I have a proc, if i run that proc from query analyzer it completes in 12 sec. I want those results to be inserted into temp table. When i try to insert the results from Stored proc to temp table it is taking 5 min.
What could be the cause of the problem? Any help would be greately appreciated. sskris
I have a temp table in my stored procedure when I try to insert into the temp table thro dynamic sql, it says that table has to be defined. What could be the problem. i have added the code below
CREATE PROCEDURE USP_RULE AS declare @TABLE1 table ( SlNo int identity(1,1), EqNum varchar(25),Pointnum varchar(25) ) declare @EqNum varchar(25),@Pointnum varchar(25) DECLARE @STRDBNAME VARCHAR(50) SET @STRDBNAME = 'DB1' EXEC('insert into '+@TABLE1+' select EQNUM,POINTNUM from '+@STRDBNAME+'..TABLE2')
I'm trying to insert any null values into a temp table. I'm storing the ixo_rlt_code as OldRole, and 'Other' as NewRole. I need both the ixo_rlt_code as OldRole and 'Other' as NewRole in the temp talbe in order to run an update I'm writing.
I know a case statement isn't necessary here, but this section is only one small part of a larger script, so I just used it to be consistent, and it will be easier to make any future changes this way. Below is my code and the error message I'm getting...
select ixo_key, ixo_title as Title, ixo_rlt_code as OldRole, CASEWHEN ixo_title is null or ixo_title = '' or ixo_title = ' ' or ixo_title = ' ' THEN 'Other'
END as NewRole
from co_customer (nolock) join co_individual_x_organization (nolock) on ixo_key = cst_ixo_key --and ixo_delete_flag = 0 where cst_delete_flag = 0 and cst_type = 'Individual' and ixo_rlt_code is null
This is the Error Message I get: Server: Msg 515, Level 16, State 2, Line 1095 Cannot insert the value NULL into column 'NewRole', table 'tempdb.dbo.#temp_______________________________________________________________________________________________________________00000001698C'; column does not allow nulls. INSERT fails. The statement has been terminated.
I have an ASP page that opens a recordset on a stored procedure. I've had it in production for over a year, and it usually works fine - subsecond response. However, in the past couple weeks, the recordset open command has intermittently started to return timeout errors. It's very strange: when the timeout occurs, it can be dependably reproduced by opening the ASP page with the same parameter that produced the initial timeout. However, if you pass a different parameter to the procedure, it runs fine! It only times out when using the specific parameter that produced the initial timeout.
Even stranger: If, when attempting to debug it, I use QA to run the sp with the "defective" parameter, the sp invariably runs fine! And subsequent runs of the ASP page start working as well!
I have repeated this process many times in the past couple weeks: receive a report of the timeout error; open the asp page with the parameter that produced the timeout to verify; repeat; open the asp page with a different parameter - works fine; repeat with the initial parameter - timeout; Open QA and run the sp - no problem; refresh the asp page - no more symptom.
The connection to the SQL Server (7.0) uses a specific SQL login for all communications with the server. So all asp pages are logged in under the same name. I thought this might be a connection pooliing issue, so this morning, when the problem occurred, I logged into QA as the special name, but again, there was no problem running the sp from QA.
So - I've run SQL Profiler to track what's going on when the problem occurs and I've discovered the last statement to successfully run. Here is the sp:
/* * File Name: np_GetAvailablePreviews.sql
Returns a list of "reports" available to be previewed, defined as:
date/shift combination with "P" mode and "C" status (if there are Shift records, there must be an All record)
If none exist, check for the existence of accepted (mode = "A") Shift records without a corresponding All record - if so, return an All item for that date
Concatenate <OPTION> tags around each item */
CREATE PROCEDURE np_GetAvailablePreviews ( @DivisionNumber smallint) AS BEGIN set nocount on declare @count int, @datefrom datetime select @datefrom = dateadd(day,-900,getdate()) CREATE TABLE #PreviewReports ( ProductionDate datetime NULL, Shift char(3) NULL )
Insert #PreviewReports SELECT DISTINCT ProductionDate,Shift FROM dbo.LineItems WHERE DivisionNumber = @DivisionNumber AND Mode = 'P' AND Status = 'C' AND productiondate >= @datefrom
-->>>The above command completes successfully according to Profiler
Insert #PreviewReports SELECT distinct t1.ProductionDate, 'All' FROM (SELECT distinct ProductionDate, Shift, Mode, Status FROM LineItems WHERE DivisionNumber = @DivisionNumber AND Shift<>'All' AND Mode='A' AND Status='C' AND productiondate >= @datefrom AND timeperiod IN ('Day','Shift') ) t1 LEFT JOIN (SELECT distinct ProductionDate, Shift, Mode, Status FROM LineItems WHERE DivisionNumber = @DivisionNumber AND Shift='All' AND Mode='A' AND Status='C' AND productiondate >= @datefrom AND timeperiod IN ('Day','Shift') ) t2 ON t1.ProductionDate = t2.ProductionDate WHERE t2.ProductionDate Is Null AND NOT EXISTS (Select * from #PreviewReports where productiondate = t1.ProductionDate and Shift = 'All')
-->>>This one (the one before this comment) starts, but does not -->>>complete
set @count=(Select Count(*) From #PreviewReports)
-->>This one never begins - the ADO command times out
<snipped>
I did not provide a repro script because the problem is so intermittent that I doubted it would do anyone any good.
However if someone feels they want to try to reproduce this, I will attempt to create a repro script for them.
I suspect there is an issue with the temp table, but it's such a moving target that I haven't been able to pin it down.
I need to insert FK information into a temp table using database name and table name as a parameter.
I've been trying different ways, even with global temp table, but still doesn't work. Below is the code showing what I am trying to achieve. I want to avoid global temp table if possible.
IF OBJECT_ID('tempdb..##FKs') IS NOT NULL DROP TABLE ##FKs CREATE TABLE ##FKs ( [ForeginKeyName] [nvarchar](128) NULL, [TableSchema] [sysname] NULL, [TableName] [nvarchar](128) NULL, [RelatedTableSchema] [sysname] NULL,
HiI need some help on achieving the following:I wrote a querie which collects Data out of three Tables, the Resultlooks like this:SET NOCOUNT ONDECLARE @ROWINTDECLARE @CURPTNO CURSORSET @CURPTNO = CURSORFORSELECT * FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGINSELECT ONE.CYNO, ONE.ROLE, ONE.ROL_BEZ, ONE.PTNO, ONE.NOCY, TWO.TEXTAS NOCY_TEXTFROM(SELECT CY.CYNO,RE.CYNO AS RECYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW)AND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO IN(@ROW))) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOThe Result looks like this:RS1:6313,1300,Architekt,99737505,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLRS2:2693265,100,Bauherr,99756900,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberRS3:2691919,100,Bauherr,99755058,NULL,NULL2691962,6000,Kontakt,99755058,NULL,NULLMy Problem is, that I need to have all the Resultsets in one Table atthe end.So my further undertaking was to create a Temp Table with theexpectation to receive all the resultsets in one Step.The TSQL for this looks like that:SET NOCOUNT ONCREATE TABLE #CYRE_TEMP(CYNOINT NULL,ROLEINT NULL,ROL_BEZVARCHAR (60) NULL,PTNOINT NULL ,NOCYINT NULL,TEXTVARCHAR (60) NULL)GODECLARE @CYNOINT,@ROLEINT,@ROL_BEZVARCHAR (60),@PTNOINT,@NOCYINT,@TEXTVARCHAR (60),@ROWINT,@CURPTNOCURSORSET @CURPTNO = CURSOR FORSELECT PTNO FROM TEMPOPEN @CURPTNOFETCH NEXT FROM @CURPTNOINTO @ROWWHILE (@@FETCH_STATUS = 0)BEGININSERT INTO #CYRE_TEMP (CYNO, ROLE, ROL_BEZ, PTNO, NOCY, TEXT)VALUES(@CYNO,@ROLE ,@ROL_BEZ ,@PTNO ,@NOCY ,@TEXT)SELECT @CYNO = ONE.CYNO,@ROLE = ONE.ROLE,@ROL_BEZ = ONE.ROL_BEZ,@PTNO = ONE.PTNO,@NOCY = ONE.NOCY,@TEXT = TWO.TEXTFROM(SELECT CY.CYNO, RTRIM(RE.ROLE) AS ROLE, RTRIM(V_ROLE.TEXT) ASROL_BEZ,RE.PTNO AS PTNO, RTRIM(RE.NAME) AS SACHBEARBEITER, RE.NOCYFROM CYRIGHT OUTER JOINRE ON RE.CYNO = CY.CYNOINNER JOINV_ROLE ON RE.ROLE = V_ROLE.CODEWHERE (RE.PTNO IN(SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROWAND V_ROLE.LANGUAGE = PT.CLANG))) AS ONELEFT JOIN(SELECT V_NOCY.CODE, V_NOCY.TEXTFROM V_NOCYINNER JOINPT ON PT.CLANG = V_NOCY.LANGUAGEAND PT.PTNO IN (SELECT PT.PTNOFROM PTWHERE PT.PTNO =@ROW)) AS TWOON ONE.NOCY = TWO.CODEFETCH NEXT FROM @CURPTNOINTO @ROWENDCLOSE @CURPTNODEALLOCATE @CURPTNOSELECT * FROM #CYRE_TEMPDROP TABLE #CYRE_TEMPGOAnd the Output looks like this now:Q1:NULL,NULL,NULL,NULL,NULL,NULL2392762,100,Bauherr,99737505,NULL,NULLNULL,1,Planer,99756900,2,Bauherr macht Pläne selberCan someone help me getting all the 6 Rows into one Table as Output?I appreciate any available Help on this..Ssscha
I am looking for an alternate logic for below-mentioned code where I am inserting into a table and having left join with the same table
insert TABLE1([ID],[Key],[Return]) select distinct a.[ID],cat1,cat2Â from (select ID,[Key] Cat1 ,[Return] cat2 from @temp as temp) a left join TABLE1 oon a.ID= o.ID and a.Cat1 = o.[Key] and a.cat2 = o.[return] where [key] is null order by ID
I have a simple query which is taking about 2.5 minutes to execute. What can be done to speed it up ? I cannot change the table structure. even without the group by, and without the float and division, it takes about 2.25 minutes.
Select 'SV00302' as FileSource, [Service_Call_ID], sum(0) as ActualHours, sum(cast([Estimate_Hours] as float)/100) as EstHours, max(MODIFDT+Modified_Time) as ModifiedDateTime
Below is a simplified table & dataset to illustrate a problem I'm experiencing with a more complex one.
Code Block
create table #test( recno smallint PRIMARY KEY, value decimal (18,2))
insert into #test values (1, 3.57) insert into #test values (2, 5.32) insert into #test values (3,6.29) insert into #test values (4, 9.25) insert into #test values (5, 0.84)
Method 1: I tried inserting rows from #test into a temp table (#table) as follows
Code Block
declare @n as nvarchar(3) set @n = 1 while @n <= (select count(recno) from #test) begin exec (' insert into ##table select *, originalrecno = (select recno from #test where recno = '+@n+') from #test' ) set @n = @n + 1 end However, this yields an error message:
Code Block
Server: Msg 208, Level 16, State 1, Line 2 Invalid object name '##table'. Note - you can comment out the insert into ##table line above to view the results that I'm trying to put into ##table.
Method 2: next I tried explicitly creating ##table & rerunning the loop containing the insert
declare @n as nvarchar(3) set @n = 1 while @n <= (select count(recno) from #test) begin exec (' insert into ##table select *, originalrecno = (select recno from #test where recno = '+@n+') from #test' ) set @n = @n + 1 end This worked - it inserted the data from the select statements in the loop into ##table.
I writing a unit test which has one stored proc calling data from another stored proc. Each time I run dbo.ut_wbTestxxxxReturns_EntityTest I get a severe uncatchable error...most common cause is a trigger error. I have checked and rechecked the columns in both of the temp tables created. Any ideas as to why the error is occurring?
--Table being called.
ALTER PROCEDURE dbo.wbGetxxxxxUserReturns
@nxxxxtyId smallint,
@sxxxxxxxxUser varchar(32),
@sxxxxName varchar(32)
AS
SET NOCOUNT ON
CREATE TABLE #Scorecard_Returns
( NAME_COL varchar(64), ACCT_ID int,
ACCT_NUMBER varchar(10),
ENTITY_ID smallint,
NAME varchar(100),
ID int,
NUM_ACCOUNT int,
A_OFFICER varchar(30),
I_OFFICER varchar(30),
B_CODE varchar(30),
I_OBJ varchar(03),
LAST_MONTH real,
LAST_3MONTHS real,
IS int
)
ALTER PROCEDURE dbo.ut_wbTestxxxxReturns_EntityTest
If on the source I have a new column, the script generated by SqlPackage.exe recreates the table on the background with moving the data into a temp storage. If the table is big, such approach can cause issues.
Example of the script is below: in the source project I added columns [MyColumn_LINE_1]  and [MyColumn_LINE_5].
Is there any way I can make it generating an alter statement instead?
BEGIN TRANSACTION; SET TRANSACTION ISOLATION LEVEL SERIALIZABLE; SET XACT_ABORT ON; CREATE TABLE [dbo].[tmp_ms_xx_MyTable] ( [MyColumn_TYPE_CODE] CHAR (3) NOT NULL,
[Code] ....
The same script is generated regardless the table having data or not, having a clustered or nonclustered PK.
     field ([idConteudo] [int] NULL)     to      ([idConteudo] [BigInt] NULL)
Or really should drop and create again?
CREATE TYPE [dbo].[tbProjeto] AS TABLE( [dsConteudo] [varchar](64) NOT NULL, [idConteudo] [int] NULL, [dtConteudo] [datetime] NULL DEFAULT (getdate()) ) GO
I am trying to insert data into two different tables. I will insert into Table 2 based on an id I get from the Select Statement from Table1. Insert Table1(Title,Description,Link,Whatever)Values(@title,@description,@link,@Whatever)Select WhateverID from Table1 Where Description = @DescriptionInsert into Table2(CategoryID,WhateverID)Values(@CategoryID,@WhateverID) This statement is not working. What should I do? Should I use a stored procedure?? I am writing in C#. Can someone please help!!
What is the best way to drop a temp table if it exists? I am looking something similar to this: if exists (select top 1 * from #TableName) then drop #TableName else end
WE have a job that loads data from an Oralce DB into our SQL Server 2000 DB twice a day. The schedule has just changed so that now there is a possibility of having my west coast users impacted when it runs at 5 PM PST and my east coast users impacted when it runs at 7 AM EST. As a workaround, I have developed a DTS package that loads the data into temp tables instead of the real tables. IE. Oracle -> XTable_temp instead of Oracle -> XTable. The load sometimes takes about an hour to an hour and a half to load, so this solution works great, but I want to then lock the table, delete it and rename the temp table to table X. The pseudo code would be:
Begin Transaction
Lock Table XTable
Drop XTable
Alter Table XTable_temp rename to XTable
Release Lock XTable
End Transaction
Create XTable_temp
I see two issues with this solution. 1) I think if I can lock XTable that the lock would be released when the table is dropped and the XTable_temp was being renamed. 2) I can't find a command to rename a table.
I am trying to insert bulk data into main table from staging table in sql server 2012. If any error comes, this total activity is rollbacked. I don't want that to happen. I want to know the records where ever the problem persists, and the rest has to be inserted.
Hi, I have a table in which I will insert several redundant data. Don't ask why, is Integration services, it only reads data and inserts it in a SQL table. THis way, I have a SQL table with several lines repeating them selves. What I want to do is create a procedure that reads the distinct data and inserts it in another table, but my problem is that I am not able to select data line by line on the original table to save it in local variables and insert it on the another table, I just can select the last line. I've tried a while cycle but no succeed. Here is my code: create proc insertLocalizationASdeclare @idAp int, @macAp varchar(20), @floorAp varchar(2), @building varchar(30), @department varchar(30)select @idAp = idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization)select @macAp=macAp,@floorAp=floorAp,@building=building,@department=department from OLTPLocalizationif (@idAp <> null)beginInsert into dimLocalization VALUES(@idAp,@macAp,@floorAp,@building,@department)endGO This only inserts the last line in the "oltpLocalization" table. O the other hand, like this:create proc aaaaasdeclare @idAp as int, @macAp as varchar(50), @floorAp as int, @building as varchar(50), @department as varchar(50)while exists (select distinct(idAp) from OLTPLocalization)begin select @idAp =idAp from OLTPLocalization where idAp not in (select idAp from dimLocalization) select @macAp = macAp from OLTPLocalization where idAp = @idAp select @building = building from OLTPLocalization where idAp = @idAp select @department = department from OLTPLocalization where idAP = @idApif (@idAp <> null)begin insert into dimLocalization values(@idAp,@macAp,@floorAp,@building,@department)endendgo this retrieves every distinct idAp in each increment on the while statement. The interess of the while is really selecting each different line in the OLTPLocalization table. I did not find any foreach or for each statement, is there any way to select distinct line by line in a sql table and save each column result in variables, to then insert them in another table? I've also thought about web service, that reads the distinct data from the oltpLocalization into a dataset, and then inserts this data into the dimLocalization table. Is there anything I can do?Any guess?Really needing a hand here!Thanks a lot!
