For SQL 2005 transactional replication I have 1400 articles (tables, views, functions, sp) that are all replicated.
Will SQL 2005 allow me to drop a table from from the publication and drop it from the publication database that is referenced by exising views or sps that are replicated or does it somehow check that?
Linda
I have 1 sql server 2005 database in Server A that is publishing a table to another database in Server B using the transactional method.
It is possible for me to delete all the rows in the database located at the publisher at the same time the subscriber pulls them?
Thanks.
Is there a script to find which non-clustered indices are replicated? I know i can do this easily through GUI , having a script will make my life much easier ....
View 0 Replies View RelatedHi All,
Is there a way by which we can modify the width of a column of a table which is being replicated without touching the ongoing transactional replication? This is for MSSQL2000 Transactional Replication.
I know (and successfully tried) that we can add a column to a table and that gets propaged to the replicate database and indeed the added column gets reflected there. How to add a column? sp_repaddcolumn or Right Click on the Publication-Properties and it shows a button to Add a Column.
This is what I have tried for modifying the width of a column of a table participating in Transactional Replication from varchar(10) to varchar(100)
MH (source) -> MH1 (Replicate)
The column €œcol1€? had width of varchar(10) and this was altered to varchar(100).
insert into MH..test_mh values(4,'abcdeabcdefff')
select * from MH1..test_mh
exec sp_dropsubscription @publication = N'MH', @article = N'test_mh', @subscriber = N'UKPBDRMTST2', @destination_db = N'MH1'
go
exec sp_droparticle @publication = N'MH', @article = N'test_mh'
go
alter table test_mh alter column col2 varchar(100) null OR
MH1..sp_help test_mh
exec sp_addarticle @publication = N'MH', @article = N'test_mh', @source_table = N'test_mh'
go
exec sp_addsubscription @publication = N'MH', @article = N'test_mh', @subscriber = N'UKPBDRMTST2' , @destination_db = N'MH1'
go
Needless to say, help would be apreciated -
~Mihir
I'm new to replication and would like to know how to drop an article published for replication. I believe I need to follow these steps, but I am unsure.
Step (1)
exec sp_dropsubscription @publication = N'db name',
@article = N'article name',
@subscriber = 'subscriber name',
@destination_db = N'db name'
Step (2)
exec sp_droparticle @publication = N'db name',
@article = N'article name'
Step (3)
drop the article on the publisher
Step (4)
drop the article on the subscriber
Is this the correct sequence or am I missing something.
Thanks, Dave
I tried to run this(below) the table is replicated(transactional).
EXECUTE
sp_rename N'dbo.Tablename.Columnname, N'New_Columnname', 'COLUMN'But getting this error message:
Msg 15051, Level 11, State 1, Procedure sp_rename, Line 227
Cannot rename the table because it is published for replication.
I have a publication on 2000 machine, replicating by pull subscription to a 2005 machine. I added a table to the Articles in the publication. Reinitialized the subscription, and also restarted both the snapshot and log reader agent. I was kind of assuming the publication would automatically create the table on the subscriber, but after a very long wait it is still not there. Am I missing anything?
PS. Distination Object setting : "Action if name is in use" is set to drop and create new, not that that should make any difference since name is not in use anyway.
Thanks
This thread is no longer active. I moved issue to a new, cleaner thread named: How can I get Transactional Republishing to work?
--------------------------------------------------------------------------------------------------------------------
I've tried for more than a week to figure this one out, but have not found a solution. I'm missing some critical information that perhaps someone can share. I'm desperate and embarassed that this has kept me stuck for so long. Thanks for any assistance.
In my simplist scenario, I'm transactionally replicating a single table from database A to database B and then from database B to database C. All databases are on the same XP server (in this simplist version of the problem). This is SQL 2005 RTM. Publication A to B replicates fine. Publication B to C can't even get the snapshot to work because I get the error:
Command attempted:
drop Table "dbo"."MyReplTable"
(Transaction sequence number: 0x00004174000000E100A300000000, Command ID: 41)
Error messages:
Cannot drop the table 'dbo.MyReplTable' because it is being used for replication. (Source: MSSQLServer, Error number: 3724) Get help: http://help/3724 (fyi - there is no help here)
I have a simple example script where I've renamed real names to fake names, that is exactly what I run to simulate the problem. Obviously the script is wrong, but where? I used the wizard to create the whole script (I know that is my first mistake ;-) ). After I start the snapshot jobs, I get the error above.
I presume that the sp_addarticle option @pre_creation_cmd = N'drop' is part of the problem. I don't have row filters. Also, I want to be able to replicate schema modifications when necessary (like add a column or drop a column)
Perhaps the sp_addpublication @repl_freq = N'continuous' option in the AtoB publication prevents the BtoC publication from ever getting a chance to do anything, if it never lets go of the table.
If it helps, here is my script with hopefully helpfully renamed objects. My real world scenario has many articles, but this is a simple version - 2 publications each having 1 article (the same table).
/****** Scripting replication configuration for server MyInstance. Script Date: 3/14/2006 11:16:58 AM ******/
/****** Please Note: For security reasons, all password parameters were scripted with either NULL or an empty string. ******/
/****** Installing the server MyInstance as a Distributor. Script Date: 3/14/2006 11:16:58 AM ******/
use master
exec sp_adddistributor @distributor = N'MyInstance', @password = N''
GO
exec sp_adddistributiondb @database = N'distribution', @data_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData', @data_file_size = 4, @log_folder = N'C:Program FilesMicrosoft SQL ServerMSSQL.2MSSQLData', @log_file_size = 2, @min_distretention = 0, @max_distretention = 72, @history_retention = 48, @security_mode = 1
GO
use [distribution]
if (not exists (select * from sysobjects where name = 'UIProperties' and type = 'U '))
create table UIProperties(id int)
if (exists (select * from ::fn_listextendedproperty('SnapshotFolder', 'user', 'dbo', 'table', 'UIProperties', null, null)))
EXEC sp_updateextendedproperty N'SnapshotFolder', N'C:ThisFolderMY2005DBWorking
epldata', 'user', dbo, 'table', 'UIProperties'
else
EXEC sp_addextendedproperty N'SnapshotFolder', 'C:ThisFolderMY2005DBWorking
epldata', 'user', dbo, 'table', 'UIProperties'
GO
exec sp_adddistpublisher @publisher = N'MyInstance', @distribution_db = N'distribution', @security_mode = 1, @working_directory = N'C:ThisFolderMY2005DBWorking
epldata', @trusted = N'false', @thirdparty_flag = 0, @publisher_type = N'MSSQLSERVER'
GO
use [DatabaseA]
exec sp_replicationdboption @dbname = N'DatabaseA', @optname = N'publish', @value = N'true'
GO
-- Adding the transactional publication
use [DatabaseA]
exec sp_addpublication @publication = N'PubAtoB', @description = N'Transactional publication of database ''DatabaseA'' from Publisher ''MyInstance''.', @sync_method = N'concurrent', @retention = 0, @allow_push = N'true', @allow_pull = N'true', @allow_anonymous = N'true', @enabled_for_internet = N'false', @snapshot_in_defaultfolder = N'true', @compress_snapshot = N'false', @ftp_port = 21, @ftp_login = N'anonymous', @allow_subscription_copy = N'false', @add_to_active_directory = N'false', @repl_freq = N'continuous', @status = N'active', @independent_agent = N'true', @immediate_sync = N'true', @allow_sync_tran = N'false', @autogen_sync_procs = N'false', @allow_queued_tran = N'false', @allow_dts = N'false', @replicate_ddl = 1, @allow_initialize_from_backup = N'false', @enabled_for_p2p = N'false', @enabled_for_het_sub = N'false'
GO
exec sp_addpublication_snapshot @publication = N'PubAtoB', @frequency_type = 1, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = null, @job_password = null, @publisher_security_mode = 1
use [DatabaseA]
exec sp_addarticle @publication = N'PubAtoB', @article = N'MyReplTable', @source_owner = N'dbo', @source_object = N'MyReplTable', @type = N'logbased', @description = null, @creation_script = null, @pre_creation_cmd = N'drop', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N'manual', @destination_table = N'MyReplTable', @destination_owner = N'dbo', @vertical_partition = N'false', @ins_cmd = N'CALL sp_MSins_dboMyReplTable', @del_cmd = N'CALL sp_MSdel_dboMyReplTable', @upd_cmd = N'SCALL sp_MSupd_dboMyReplTable'
GO
-----------------BEGIN: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseA]
exec sp_addsubscription @publication = N'PubAtoB', @subscriber = N'MyInstance', @destination_db = N'DatabaseB', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all', @update_mode = N'read only', @subscriber_type = 0
exec sp_addpushsubscription_agent @publication = N'PubAtoB', @subscriber = N'MyInstance', @subscriber_db = N'DatabaseB', @job_login = null, @job_password = null, @subscriber_security_mode = 1, @frequency_type = 64, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 20060314, @active_end_date = 99991231, @enabled_for_syncmgr = N'False', @dts_package_location = N'Distributor'
GO
-----------------END: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseB]
exec sp_replicationdboption @dbname = N'DatabaseB', @optname = N'publish', @value = N'true'
GO
-- Adding the transactional publication
use [DatabaseB]
exec sp_addpublication @publication = N'PubBtoC', @description = N'Transactional publication of database ''DatabaseB'' from Publisher ''MyInstance''.', @sync_method = N'concurrent', @retention = 0, @allow_push = N'true', @allow_pull = N'true', @allow_anonymous = N'true', @enabled_for_internet = N'false', @snapshot_in_defaultfolder = N'true', @compress_snapshot = N'false', @ftp_port = 21, @ftp_login = N'anonymous', @allow_subscription_copy = N'false', @add_to_active_directory = N'false', @repl_freq = N'continuous', @status = N'active', @independent_agent = N'true', @immediate_sync = N'true', @allow_sync_tran = N'false', @autogen_sync_procs = N'false', @allow_queued_tran = N'false', @allow_dts = N'false', @replicate_ddl = 1, @allow_initialize_from_backup = N'false', @enabled_for_p2p = N'false', @enabled_for_het_sub = N'false'
GO
exec sp_addpublication_snapshot @publication = N'PubBtoC', @frequency_type = 1, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = null, @job_password = null, @publisher_security_mode = 1
use [DatabaseB]
exec sp_addarticle @publication = N'PubBtoC', @article = N'MyReplTable', @source_owner = N'dbo', @source_object = N'MyReplTable', @type = N'logbased', @description = null, @creation_script = null, @pre_creation_cmd = N'drop', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N'manual', @destination_table = N'MyReplTable', @destination_owner = N'dbo', @vertical_partition = N'false', @ins_cmd = N'CALL sp_MSins_dboMyReplTable', @del_cmd = N'CALL sp_MSdel_dboMyReplTable', @upd_cmd = N'SCALL sp_MSupd_dboMyReplTable'
GO
-----------------BEGIN: Script to be run at Publisher 'MyInstance'-----------------
use [DatabaseB]
exec sp_addsubscription @publication = N'PubBtoC', @subscriber = N'MyInstance', @destination_db = N'DatabaseC', @subscription_type = N'Push', @sync_type = N'automatic', @article = N'all', @update_mode = N'read only', @subscriber_type = 0
exec sp_addpushsubscription_agent @publication = N'PubBtoC', @subscriber = N'MyInstance', @subscriber_db = N'DatabaseC', @job_login = null, @job_password = null, @subscriber_security_mode = 1, @frequency_type = 64, @frequency_interval = 0, @frequency_relative_interval = 0, @frequency_recurrence_factor = 0, @frequency_subday = 0, @frequency_subday_interval = 0, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 20060314, @active_end_date = 99991231, @enabled_for_syncmgr = N'False', @dts_package_location = N'Distributor'
GO
-----------------END: Script to be run at Publisher 'MyInstance'-----------------
In Transactional Replication -while Publisher, Distributer & Subscriber are on same instance- can I have additional columns in destination Table & set "Action if name is in use" for related Article to "Keep existing object unchanged"?
I do this but even Snapshot is not transfered to destination table!!
Hello,
I'm interested in combining the Peer-to-Peer Transactional Replication and Standard Transactional Replication to provide a scale out solution of SQL Server 2005. The condition is as follows:
We may have 10 SQL Server 2005 (1 Publisher + 9 Subscriber) running transactional replication in the production environment and allow updates in subscribers. To offload the loading of the publisher, we plan to have 2 Publisher (PubNode1 and PubNode2) using Peer-to-Peer Transaction Replication and the rest 8 subscribers will be divided into 2 groups. The subscribers 1-4 (SubNode1, SubNode2, SubNode3, and SubNode4) will be set to be standard transactional replication subscribers of PubNode1, and the rest 4 subscribers (SubNode5, ..., SubNode8) will be set to be standard transactional replication subscribers of PubNode2.
Is it possible to setup above 2 Publisher + 8 Subscriber topology?
Also, could we set the 8 subscribers with updatable subscriptions to achieve each node is updatable?
We do not plan to set all the 10 nodes using Peer-to-Peer Transactional Replication as it is necessary to make sure n*(n-1)/2 (i.e. 45) peer-to-peer connections is reliable. It seems that the maintenance cost is high if the servers are not in a LAN and the topology is very high coupling. So we prefer to divide the 10 nodes into 2 groups and reduce the cost of each node to maintain the connections to all other sites.
That's the scenario.
Any feedback is welcome and appreciated.
Thanks,
Terence
Hi,I have transactional replication set up on on of our MS SQL 2000 (SP4)Std Edition database serverBecause of an unfortunate scenario, I had to restore one of thepublication databases. I scripted the replication module and droppedthe publication first. Then did a full restore.When I try to set up the replication thru the script, it created thepublication with the following error messageServer: Msg 2714, Level 16, State 5, Procedure SYNC_FCR ToGPRPTS_GL00100, Line 1There is already an object named 'SYNC_FCR To GPRPTS_GL00100' in thedatabase.It seems the previous replication has set up these system viewsSYNC_FCR To GPRPTS_GL00100. And I have tried dropping the replicationmodule again to see if it drops the views but it didn't.The replication fails with some wired error & complains about thisviews when I try to run the synch..I even tried running the sp_removedbreplication to drop thereplication module, but the views do not seem to disappear.My question is how do I remove these system views or how do I make thereplication work without using these views or create new views.. Whyis this creating those system views in the first place?I would appreciate if anyone can help me fix this issue. Please feelfree to let me know if any additional information or scripts needed.Thanks in advance..Regards,Aravin Rajendra.
View 2 Replies View RelatedI have been researching on the proper steps or sequence to follow to completely remove SQL Server 2012 Transactional Replication. Â I have read articles about using SSMS as well as using replication stored procedures and some procedures use SQLCMD or just regular TSQL executed in SSMS. Â I have also read articles where people said all you really need is connect to the Publisher instance, find the publication you want to remove and choose "Delete" and everything will be taken care of behind the scene. I have three SQL servers that participate in transactional replication. Â SQL-P (publisher),Â
SQL-D (distributor) and SQL-S (subscriber). Â Do I need to connect to the distributor instance and the subscriber instance when removing transactional replication or is it just really connecting to the publisher and click delete on the publication? I want everything gone including any metadata, systems tables, distributions db and any other replication objects created during the initial configuration.
I added couple of new columns to the distribution database and those new columns are not being replicated.
View 3 Replies View RelatedUsing SQL 2005 SP2. I have a publication that contains indexed views, and some other objects that query the indexed view using WITH (NOEXPAND). Currently replication fails because the CLUSTERED INDEX on the view is NOT replicated. I've experimented with various schema options but nothing changes. The view is replicated but not the clustered index on that view. I've seen some discussion on replicating indexed views to a table, but I would like to replicate indexed view schema fully. (Including the clustered index on that view). Is there a way to make this work?
View 4 Replies View RelatedI'm a novice with replication and am in need of direction on how to restore replicated databases. Server A replicates 5 databases to server B using transactional replication. Server A also contains the distribution database. I'm perfoming PUSH replication.
The development area asked me to restore Server A with a copy of production data located on server C. After I restored the data from C to A, I noticed that server A was no longer published. Is this normal?
I re-published the 5 databases, but noticed that the Log Reader Agent has now been running for 2 hours. I'm trying to give myself a crash course in replication, but am coming up empty regarding (1) the prefered method for restoring replicated databases and (2) determining why the Log Reader Agent is taking so long.
Any suggestions?
Thanks, Dave
I am trying to delete a database that currently subscribes for replication. The problem however, is that the publishing server no longer exists and I can't disable the subscription therefore I can't drop the database. When I try to disable the replication the server tries to communicate with the old server. Is there anyway to force the dropping of the database or to force the server to disable replication.
thanks in advance
Michael
I am working on establishing a merge replication process between SQL Server 2005 and SQL Mobile 2005. I started with a new SQL Server 2005 instance and went through the Sample for SQL Mobile merge replication. So far so good.
Today, I tried to drop all support for replication on my current SQL 2005 test instance, so that I can start from a fresh instance and do another. I used Management Studio to drop all publisher and distribution settings and had several errors occur, where some roles were not allowed to be dropped because they had membership in them.
I dropped all the users that I added to the SQL logins and tried again.
Now I am trying to run the following script:
use AdventureWorks
exec sp_replicationdboption @dbname = N'AdventureWorks', @optname = N'merge publish', @value = N'false', @ignore_distributor = 'true'
-- Dropping the distribution publishers
exec sp_dropdistpublisher @publisher = N'XP-MIKED-LAPTOP'
GO
-- Dropping the distribution databases
use master
exec sp_dropdistributiondb @database = N'distribution'
GO
/****** Uninstalling the server XP-MIKED-LAPTOP as a Distributor. Script Date: 1/14/2006 2:16:29 PM ******/
use master
exec sp_dropdistributor @no_checks = 1, @ignore_distributor = 1
GO
The error I am getting from the first batch (sp_replicationdboption) is this:
Msg 208, Level 16, State 1, Procedure sp_MSmergepublishdb, Line 103
Invalid object name 'dbo.sysmergesubscriptions'.
To me it looks like all the publication objects have been already removed from AdventureWorks, but in sysdatabases, the category column still says 4 (merge publication). Since I can't just do this anymore:
UPDATE MASTER.DBO.SYSDATABASES
set category = 0
where dbid=8
I just don't know what I can do at this point. I can't even create a new publication in AdventureWorks because it thinks there is a sysmergepublications table in there and fails when there isn't.
We have a master database (SQL 2014 Std) from which data are imported from XML files (send by en ERP system) using SSIS. Â There is about 12 other servers (SQL 2014 Express) located in remote warehouses. People will uses PocketPC to scan barcode of products in the warehouses and all operations must be forwarded to the master DB to be exported in a XML file for the ERP system.Now, each warehouses are independant. How can I setup the replication so only data belonging to a specific warehouse is replicated to its corresponding DB? I thought about creating views, one for each warehouses, and setup a replication for each warehouse, so there would be 12 merge replications configured. Is it fine?
View 2 Replies View RelatedI have Snapshot set up as a schedule task between server A and server B.
If I make changes to the db schema on server A - the changes are not replicated to server B.
Is this normal?
Do I have to restart the Sanapshot agent each time there is a schema change?
Thanks,
Bianca
We had an issue recently where a (transactional) replicated table was replicating data as expected.
Then about 30 or so rows in the source table were not in the destination table, but other rows created after those 30 rows were replicated.
We have pretty much confirmed that users did not delete those rows.
Unfortunately we had to resolve the issue quickly and so blew away & recreated the subscription so a lot of evidence is probably gone from the crime scene.
We cant figure out what could cause 30 rows not to be replicated, yet leave replication operational.
I am working on bringing our disaster recovery site to be a live site. Currently we replicate to one of out servers (server B) with merge replication (from server A). Server A also does one way transactional replication form some table to several other servers including servers at the DR site.
This setup is not going to be fast enough for what we need so I am wondering if a table is receiving merge replication will the merge updates also replicate down the transaction path??
Example...
Server B update a row and merges to Server A. With this update them replicate (via transactional) to Server C??
thanks...
I am trying to drop a primary key on column LID and then create a clustered index on a new identity column ID and then add the primary key back on the LID. I am not able to do so due the table being in replication. here is the error:
Cannot alter the table '' because it is being published for replication.
How do I get past the error and create the Clustered Index on ID column in both publisher and subscriber?
On my distribution server there is a directory called mssql7
epldataunc that houses the bcp, sch and idx files for replications. A directory is created for each publication. Most directories are empty but some contain all the table idx, sch and bcp files for the publication. Some of these files are over 6 month. Does anyone know if these files are neccessary to keep and why do only some publications have these files. I am wondering if they are kept when you push the publicaiton and it errors out originally and you have to restart it? If any one can shed some like on this I would appreciate it.
Hi,
I am planning to do a transactional replication from production server to reporting server. In one of my database is having 150 tables in it, only 100 tables are having primary key . Remaining tables are not have primary keys. So i am not able to do transactional replication for those 50 tables. Could any one tell me how i have to approch transactional replication. Because i need to have production data at my reporting server in regular interval.
So pls suggest me .
I am using Sql 7.0 with service pack2.
Thanks!
Kavira
I have a problem with transactional replication in SQL Server 7. I have two databases (a publisher-distributor server and a suscriber server) and when I do an UPDATE in the publisher database the Log Agent Reader reads the UPDATE as an DELETE-INSERT and when the suscriber pull the suscription and try to do first the DELETE the transactional replication stops because of the Foreign Keys in the suscriptor database (that are the same as the publisher).
If anybody knows how to solve it, please tell me
Thanks
I have two servers networked via workgroups (no domain) and am trying to install Transactional Replication. Everything appears to install correctly, but when I run the initial Snapshot Agent I get the following error -
The process could not create file 'CONCEPCIONC$MSSQL7ReplDatauncCONCEPCION_Erik_Rep lication_Erik_Replication19991029153207Employer.sc h'.
Access is denied.
The SQLAgent is starting with same user account on both machines - admin rights and the same password. I have added this user to the (
epldata) folder permissions as well. I even see a "Employer.sch" file in the directory.
What am I missing?
Hello,
I am planning to implement replication between two servers (either snapshot/transactional). Those two servers are physically connected but we don't have domain concept i.e we connected both servers physically and it can be pinked from each other, but not under any domain (not also under different domain). How should I register SQL server& agent services to start with 'Service startup Account'. In this case I cannot start both servers using same domain Account, they how can I relate...
Thanks
Hi guys can anyone help me with this issue. if so thankyou kindly.
1. created transactional publication (for tables, stored procs & views )
2. created empty database at subscriber
3. set up pull subscription at subscriber
4. ran the initial snapshot agent at the publisher
5. checked the schema files & found out it hadn't scripted the primary keys on the tables.
Problem: PRIMARY KEY AINT GOIN ACROSS, COULD ANYONE TELL ME IF IVE MISSED SOMETHING? THANK YOU MUCH APPRECIATED GUYS.
? Could it be that it is not picking up the primary keys on the tables because I am replicating stored procs and views with that publication?
? Should I break my publications into 3; say 1 for each object?
Thank you guys for taking the time to read this.
Hi
I am tring to implement transactional replication.
How do i publish tables which donot have primary keys?...because transactional replication seems to publish only the tables which has a primary key.
Thanks
Madhukar
Hello all! I am setting up my first Replicated database, and want to get this right.
We are a Newspaper, and I will be Publishing the database that is the back end of the web server. The goal is to load balance the web site as well as to have a second identical server in case something goes wrong. Both the Subscriber and the Publisher need to be kept in sync as new articles are posted, so my client will just be updating the Publisher. But I'd like to keep a single set of usage statistics, so I was thinking of using Immediate Updating so the Subscriber can update the Publisher using two-phase commit.
What will happen if the Publisher shuts down and an update is attempted on the Subscriber? Will it just hang? Let's assume the worst - what if my Publisher is kaput? How do I determine that my other database is a Subscriber; and how do I stop it from being a Subscriber?
Thanks in Advance,
Hi
I have a requirement for pushing transactional publication to various subscribers. Each subscriber will need to receive a different subset of rows from a table. So I need all rows published, but with horizontal filtering at subscriber level. Is there a way of applying filtering at the subscription level.
Thanks
Tariq
I am using transactional replication between two SQL 2005 databases. On Sunday evenings, we run a maintenance plan that rebuilds the indexes on the publisher DB. When the plan runs, the replication receives errors and cannot continue. The error appears to be at the publisher level. The publisher runs continually and the subcriber runs every 10 minutes. The error states "cannot run sp_replcmds" Other than Sunday, everything runs fine.
Thank you
I want to set up the transactional replication. How many service accounts we need and what kind of permissions it required in windows level?Only two servers we are using. Pub/Distributor and Subsciber.Which option is better Push or pull?
View 1 Replies View Related