Trouble Translating Query From Access To SQL Server
Feb 16, 2006
Gary writes "I'm imported the query from Access (where it worked perfectly) to SQL View where the "Iif" statements caused an issue.
Here's a SMALL portion of the original:
SELECT tblTransactionBuyer.TransBuyerID,
tblDefaults.CompID,
([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA,
[TransBuyerPropSalePrice]*
(IIf([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],
IIf([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA])))/100 AS VAFunding, ......
Below, are my changes so far, but I'm stuck.
SELECT tblTransactionBuyer.TransBuyerID,
tblDefaults.CompID,
([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA,
[TransBuyerPropSalePrice]*
If([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],
If([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA]/100)) AS VAFunding, ........
It appears that I may not be able to put an IF into a SQL SELECT. If not, how can I get the same effect ?
Thanks. Gary
Listed Below is the Full Access Query:
SELECT tblTransactionBuyer.TransBuyerID, tblDefaults.CompID, tblTransactionBuyer.TransBuyerEntryDate, qryUserAlphaList.UserName, qryUserAlphaList.UserAreaCode, qryUserAlphaList.UserPhone, tblTransactionBuyer.TransBuyerName, tblTransactionBuyer.TransBuyerVaEligible, tblTransactionBuyer.TransBuyerPropAddress, tblTransactionBuyer.TransBuyerPropCity, tblTransactionBuyer.TransBuyerPropSalePrice, ([TransBuyerPropSalePrice]*([DefBasePercentFHA])/100) AS LoanBaseFHA, ([TransBuyerPropSalePrice]*([DefBasePercentCONV])/100) AS LoanBaseCONV, ([TransBuyerPropSalePrice]*([DefBasePercentVA])/100) AS LoanBaseVA, ([TransBuyerPropSalePrice]*([DefBasePercentJumbo])/100) AS LoanBaseJumbo, [LoanBaseFHA]*[DefMipFHA]/100 AS MipFHA, [LoanBaseCONV]*[DefMipCONV]/100 AS MipCONV, [LoanBaseJumbo]*[DefMipJumbo]/100 AS MipJumbo, [TransBuyerPropSalePrice]*(IIf([TransBuyerPropSalePrice]>=[DefLoanMinJumbo],[DefFundingJumboVA],IIf([TransBuyerVaUsed]="Yes",[DefFundingUsedVA],[DefFundingVA])))/100 AS VAFunding, [LoanBaseFHA]-[DownOverMinFHA]+[MipFHA] AS LoanTotalFHA, [LoanBaseCONV]-[DownOverMinCONV]+[MipCONV] AS LoanTotalCONV, [LoanBaseJumbo]+[MipJumbo]-[DownPaymentJumbo] AS LoanTotalJumbo, [LoanBaseVA]+[VAFunding]-[DownPaymentVA] AS LoanTotalVA, [TransBuyerPropSalePrice]*([DefMinDownPayFHA]/100) AS MinDownFHA, [TransBuyerPropSalePrice]*[DefMinDownPayCONV]/100 AS MinDownCONV, [TransBuyerPropSalePrice]*[DefMinDownPayVA]/100 AS MinDownVA, [TransBuyerPropSalePrice]*[DefMinDownPayJumbo]/100 AS MinDownJumbo, tblTransactionBuyer.TransBuyerIntRate, tblTransactionBuyer.TransBuyerLoanYears, tblTransactionBuyer.TransBuyerHazardIns, tblTransactionBuyer.TransBuyerFloodIns, tblTransactionBuyer.TransBuyerClosingDate, IIf(([TransBuyerConvDownPayPercent]/100)*[TransBuyerPropSalePrice]>[TransBuyerConvDownPayCash],([TransBuyerConvDownPayPercent]/100)*[TransBuyerPropSalePrice],[TransBuyerConvDownPayCash]) AS ConvDownPay, tblDefaults.DefBuyAppraisal, tblDefaults.DefBuyCreditReport, tblDefaults.DefBuyJumboUnderwriting, tblDefaults.DefBuyVAUnderwriting, tblDefaults.DefBuyFHAUnderwriting, tblDefaults.DefBuyCONVUnderwriting, tblDefaults.DefBuyJumboTaxService, tblDefaults.DefBuyVATaxService, tblDefaults.DefBuyFHATaxService, tblDefaults.DefBuyCONVTaxService, tblDefaults.DefBuyFloodCert, tblDefaults.DefBuyAbstractTitle, tblDefaults.DefBuyMiscFedex, tblDefaults.DefBuyRecording, tblDefaults.DefBuySurvey, tblDefaults.DefBuyAttorney, tblDefaults.DefBasePercentFHA, tblDefaults.DefBasePercentCONV, tblDefaults.DefBasePercentJumbo, tblDefaults.DefBasePercentVA, [TransBuyerPropSalePrice]*[DefPropTaxRate] AS PropTax, [LoanBaseFHA]*[DefBuyOrigFHA]/100 AS OrigFHA, [LoanBaseCONV]*[DefBuyOrigCONV]/100 AS OrigCONV, [LoanBaseVA]*[DefBuyOrigVA]/100 AS OrigVA, [LoanBaseJumbo]*[DefBuyOrigJumbo]/100 AS OrigJumbo, [DefTitleInsDollar]*([TransBuyerPropSalePrice]/[DefTitleInsPerX]) AS TitleInsurance, [OrigFHA]+[DefBuyAppraisal
View 1 Replies
ADVERTISEMENT
Mar 23, 2006
Hello,
I am wondering if someone could give some advice about how I could translate the following query in MS Access into T-SQL. Any help is greatly appraciated.
Thanks
------------------------------------------------------------------------------------
TRANSFORM Avg(A.Response) AS AvgOfResponse
SELECT A.QuestText, A.SubQuestText
FROM TableName A
WHERE A.Response Is Not Null
GROUP BY A.QuestText, A.SubQuestText
ORDER BY A.QuestText, A.SubQuestText
PIVOT A.[Ethnicity Group]
-------------------------------------------------------------------------------------------------------------------------------
View 1 Replies
View Related
May 2, 2007
Is it possible to create a view in SSE like I use to do with Access:
SELECT Sum(IIf([Active],1,0)) AS Expr1
FROM Table1;
Active is a boolean field
Many thanks for any kind of help.
View 3 Replies
View Related
Jul 13, 2006
Can someone tell me what this Where clause (from MS Access) should be T-SQL?
Basically, if the value in the [reason] field contains 'DIST' then the row should return as long as the value in [movement] is greater than or equal to 1.
Where IIf([reason] LIKE '%DIST%',Val([movement]),1)>=1
Thanks!
View 6 Replies
View Related
Nov 13, 2007
Good morning,
I have a project that consists of modifying a report in Crystal. The problem is that I know very little about SQL and I need to add some data items to Crystal using SQL. The guide that I was given refers to Enterprise Manager and SQL Query Analyzer but they have since upgraded to SQL Server Management Studio. Can anyone translate the following statement into SQL Server Management Studio so that I can complete this process?
Best regards,
We will now edit the View on the MS SQL server. Open Enterprise
Manager and find the cst_adEnroll_MyInitials _vw in the Views
section of the database. Right-click, select Copy, then go to the
menu bar and Select Tools and SQL Query Analyzer. Once Query
Analyzer opens: Change CREATE to ALTER before the view name.
View 1 Replies
View Related
Apr 30, 2008
My question is on an appropriate approach to take.
We have an very large company database that supports all of current software in Sql Server. A current requirement is to take data from a Oracle Database that has "agreed upon" tables and to "Translate" that to SQL Server and place them in agreed upon "Temp" tables. Then our other software will know what to do with these temp tables and do their thing.
Upon launching this translator application, it will delete all of those temp tables and do (what I just specified above).
My initial thought was to dump each Oracle table into a DataTable. Then delete any temp tables in our database. Then create the temp tables and begin updating our Sql Server by iterating through the DataTable performing updates?
Is this a good idea?
View 7 Replies
View Related
Sep 28, 2007
I'd been using this DB for months. Then I had to install Vista and it's become very difficult to work with because of so many security demands. You set permissions here and there and it still does not work. For some reason the permissions are being wiped out often after a sign off.
Anyhow it seemed to work until about an hour ago off and on. Accasional breakdowns happen. I also want to add that I am debugging a huge C# app and Sql Server is attached to it. So the conditions are definitely unstable but that part of code which broke down has not been changed for months.
I had to disconnect DBs and reconnect them in Sql Server and VS back and forth a number of times.
In short, I got this error (after some other similar):
Cannot open user default database. Login failed.
Login failed for user 'DDMNVT61AlexBB'.
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at tapTCPports_1.HttpHistoryRequests.subHistoryRequest_Click(String symbol, String passThru, String discriminator) in C:VCsharp_Projects apTCPports_1HttpHistoryRequests.cs:line 103
I go to Sql Server and see all tables in the Server Explorer.
I go to my VS Server Explorer and see all tables.
Connection strings haven't been changed.
What could be the problem?
Thanks.
View 3 Replies
View Related
Dec 19, 2001
Hello
I have a problem regarding the importing the access database in the SQL server 7.0.
We have a matrimonial portal named www.viwahmandap.com which is using an access database.We are using the dsn to access this .mdb file. Now we will be upgrading to SQL 7.0.The server administrator won't
do anything like importing the access database .So i will have to download the access database on our domain ,import this access file into an SQL database using the DTS wizard which is available in SQL 7.0(This i can do). This will create the respective .mdf & .ldf files.Now What are the next steps to be followed at my end? What should i ask for from the the server administrator?Are there any changes required in my ASP application.What else should be done?Please help.
Ashish
View 1 Replies
View Related
Oct 7, 2005
Ok, I need to give some details. I have a secure Access Database using WorkGroup Security logon. It is an Access 97 database (yes I know it is "old").
I tried to create a DTS package in SQL Server 2000 to connect to it, but I am getting the same error that I got before I "joined" the workgroup when attempting to access the DB. So I changed the Service logon identites to mimic <me> as the logon, and still I can't get it to connect. The user name and password I put in the connection are correct.
It seems like nothing is working and I am all out of ideas. Does anyone have any recommendations? Has anyone done anything like this successfully?
PS: I can manually logon to the database, and extract the data 1 table at a time, but I don't want to export 40 tables each time I have to load this data. Any help would be appreciated. Thanks in advance.
Frank
View 6 Replies
View Related
Nov 29, 2006
Is there a way to specify a MS Access table (or query object) in the select query of SQL Server.
Ex.:
MSAccessTable (in file.mdb)
col1
col2
a1
a2
b1
b2
SQL query in SQL Server:
SELECT col1, col2 into SqlTable from [file.mdb].MSAccessTable;
Thanks,
View 3 Replies
View Related
Sep 12, 2007
Hi all,
I followed this excellent tutorial (from Microsoft) about creating and using a SQLExpress db table internal to your website:
http://www.asp.net/learn/videos/video-08.aspx
and the site I created works just fine - locally. When I publish to my web host provider I get this error:
[SqlException (0x80131904): An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)]
My web host provider supports .NET 2.0 but doesn't support MS SQL Server. But that should matter - right? Because I'm putting the db instance right in the website?
I did a search and followed some of the advice:
I went into the SQL Server Surface Area Config Mgr and set SQLExpress for local and remote connections and rebooted/republished. I also have SQL Server 2005 installed as a separate entity (if that makes a difference).
I still get the above error. This is the connection string from the web.config:
<connectionStrings><add name="ConnectionString" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|Customers.mdf;Integrated Security=True;User Instance=True" providerName="System.Data.SqlClient"/>
</connectionStrings>And this is the call from the markup:
<asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>"
SelectCommand="SELECT * FROM [Customer]"></asp:SqlDataSource>
Does any know the fix for this?
Thanking you in advance
Pat
View 4 Replies
View Related
Jan 6, 2008
when I hit F12 to preview my page and forms etc it goes to this error
This error (HTTP 500 Internal Server Error) means that the website you are visiting had a server problem which prevented the webpage from displaying.
For more information about HTTP errors, see Help.
AND when I try to hold up to an SQL database it wont let me and says the server doesnt exist still. Whats wrong with my SQL server and what can I do to resolve this problem?
View 1 Replies
View Related
May 30, 2008
Hi everyone. I am having difficulties with a cursor that I am trying to write. The purpose of the cursor is to loop through all tables in a selected Database and revoke "Select" access to that table for the indicated role (RoleToRevoke). I am getting the error on the @name variable within the REVOKE statement. I have placed a comment indicating where I am getting the error. Is there a way to have sql server interpret this @name variable within the REVOKE statement? Thanks for your help.
Code Snippet
USE [Database_Name];
Declare cursorExample Cursor for
Select TABLE_NAME
from information_schema.tables
Where TABLE_TYPE='Base Table'
and TABLE_SCHEMA='dbo'
Declare @name as varchar(255)
Declare @ErrorSave as int
Declare @ErrorCount as int
Open cursorExample
Fetch Next from cursorExample into @name
SET @ErrorSave = 0
SET @ErrorCount = 0
Begin Tran
While @@Fetch_Status=0
Begin
--Getting Error on Line below on @name
REVOKE SELECT ON OBJECT::@name FROM RoletoRevoke;
IF (@@ERROR <> 0)
BEGIN
Print 'Error Revoking Access to Table: ' + CAST(@name AS varchar(75))
SELECT @ErrorCount = @ErrorCount + 1
END
IF (@@ERROR = 0)
BEGIN
Print 'Successful Revoking Select Rights on Table: ' + CAST(@name AS varchar(75))
SELECT @ErrorSave = @ErrorSave + 1
END
Fetch Next from cursorExample into @name
End
IF @ErrorCount = 0
BEGIN
COMMIT TRAN
PRINT 'COMMITTED TRANSACTION'
PRINT 'Total Tables Affected:' + CAST(@ErrorSave AS varchar(75))
END
ELSE
BEGIN
ROLLBACK TRAN
PRINT 'ROLLED BACK TRANSACTION'
END
Close cursorExample
Deallocate cursorExample
GO
View 9 Replies
View Related
Sep 29, 2004
Hi all
I have this snippet of data
hierId nodeId nodeName parentId childId
----------- ----------- -------------------------------------- ----------- -----------
437 1582275 Accountants 1582270 1582275
437 1582276 Asset financiers 1582270 1582276
437 1582270 Banking & financial institutions NULL NULL
437 1582286 Private banks 1582277 1582286
437 1582277 Banks 1582270 1582277
I want to loop through this data and put the results into a temp table so it looks like this:
hierId nodeName ids
------------------------------------------------------------------------------------------------------
437 Banking & financial institutions -> Accountants1582270 | 1582275
437Banking & financial institutions -> Asset financiers1582270 | 1582276
437Banking & financial institutions -> Banks1582270 | 1582277
437Banking & financial institutions -> Banks -> Private banks1582270 | 1582277 | 1582286
437Banking & financial institutions1582270
Can anyone help me with achieving this
Thanks in advance
View 2 Replies
View Related
Mar 7, 2007
I am having trouble getting my head round participation for some scenarios. Consider the following:
River MUST flow through 1 or more cities.
City MUST have at least 1 river.
This is represented the pk of River being put as a fk in city AND (to represent that city must have a river), the foreign key does NOT allow nulls.
So how about...
River MAY flow through 0,1 or more cities. City MAY have ONLY 1 river.
This time we allow the foreign key in city to have NULLs, but how about the otherside, the pk of river. How do I represent the MAY here, and a pk value cannot be null.
Thanks
Drew
View 20 Replies
View Related
Sep 25, 2006
My OLDB data source in the Lookup Transformation is not converting
When I try to join the colunms it claims the data types do not match the only differnece is the percision.??
ORACLE
select CAST(group_id AS NUMBER(18)) group_id from blah blah table
SSIS data type = [DT_NUMERIC], Percision = 38
SQL Sever data source
SELECT
CAST(PRINCIPAL_ID as numeric) GROUP_ID,
SSIS data type = [DT_NUMERIC], Percision = 18
View 1 Replies
View Related
Mar 2, 2007
I have a table adapter query with a like clause that I can't get to work. The field is "Type", so I have "LIKE '%@Type%'". When I click the Execute Query button to test, not only does nothing get returned, I don't get the chance to enter the parameter. If I change LIKE '%@Type%' to say, LIKE '%book%', the appropriate records are returned. I actually need to check two parameters. If I ad the second parameter, the where clause becomes(Type LIKE '%@Type%') AND (SendState = @SendState)When I test the query, a screen pops up to let me enter the state, but not the Type. I can't see anything wrong with the query, but something must be. Diane
View 4 Replies
View Related
Jun 10, 2008
I am having some trouble using a sub query. I want to use the red part as a sub query because I have to alter some values based on the NcodeM that gets assigned to each record. As a stand alone query the red part works well. When I run the whole thing I get error message:
Msg 156, Level 15, State 1, Line 7
Incorrect syntax near the keyword 'select'.
Msg 102, Level 15, State 1, Line 21
Incorrect syntax near ')'.
Select SaleYear, SaleMonth, vin10, NewUsed, VehicleYear,
VehicleMake, VehicleModel, VehicleTrim, AlgCode, CashDown, AppZip, ActualSalePrice,
TradeMake, TradeModel,TradeYear, TradeNcodeL, TradeNcodeM, OwingOnTrade, TradeAllowance, NetTradeIn
From D
(select left(consulting.dbo.vw_dds.date,4) AS SaleYear, left((right(consulting.dbo.vw_dds.date,4)),2)
AS SaleMonth,
vin10, NewUsed, VehicleYear, VehicleMake, VehicleModel, VehicleTrim, AlgCode, CashDown,
AppZip, (CashPrice-Rebate-TaxesIncludedInCashPrice) AS ActualSalePrice,
ltrim(consulting.dbo.vw_dds.trademake) AS TradeMake, ltrim(trademodel)TradeModel,
TradeYear, NcodeL AS TradeNcodeL, NcodeM AS TradeNcodeM, OwingOnTrade, TradeAllowance, NetTradeIn
from consulting.dbo.vw_dds
inner join (select distinct make, model, ncodel, ncodem, modelyear from us.dbo.algmaster) Code
on code.make = ltrim(consulting.dbo.vw_dds.trademake) and code.model= ltrim(trademodel) and
code.modelyear = tradeyear) D
Any suggestions would be greatly appreciated.
Thanks,
Tasha
View 2 Replies
View Related
Nov 8, 2007
I am having trouble figuring this one out.
I have a table named studentgrades
In it, it contains studentid, teacherid, classgrade
If I do this code it gives me the count of student that made an "A" grouped by teacherid
select
teacherid,
count(grade) as GradeACount
where
classgrade between 90 and 100
from
studentgrades
group by
teacherid
ok this seems simple enough...if I manilpulate the where clause I can get "B","C" and "D" student counts.
My question is how can i get a dataset to return
teacherid,GradeACount,GradeBCount,GradeCCount,GradeDCount
all in one query...I am trying to automate a report so that school districts can pull their own queries via Reporting Services.
I appreciate your time.
Alex Flores
View 5 Replies
View Related
Nov 16, 2006
Our Client/Contact database works like this:
CLIENTDB - This table holds the records of all Clients, Contacts, Suppliers, etc. They are defined as one type of record or another by the 'Contact_Type' field - Clients are type 'B', Contacts are 'D', etc.
Contacts are often linked to a Client, but don't have to be. These links are stored in the LINKS table.
So, what I'm trying to do, is generate a report of all Contacts that aren't linked to Clients but possibly should be because they share a company name. The SQL I've used to get this info is as follows:
SELECT *, CLIENTDB.Formal_Name as FN
FROM CLIENTDB
WHERE (CLIENTDB.Contact_Type = 'D')
AND (NOT EXISTS (SELECT * FROM CLIENTDB, LINKS JOIN CLIENTDB as CB ON CLIENTDB.Contact_ID = LINKS.Link_Record_ID))
AND (EXISTS (SELECT * FROM CLIENTDB WHERE (CLIENTDB.Contact_Type = 'B') AND (lower(CLIENTDB.Formal_Name) LIKE '$FN')))
The problem is the final AND condition - I want this to filter the results down to only those Contacts that have a Formal_Name like an existing Client, but when I add or remove this one line, it makes no difference to the output.
Any suggestions greatly appreciated
Thanks, Nick
View 1 Replies
View Related
May 28, 2008
Hi, I have created a query (using SQL 2005) that will pull the people who have spent the most on tickets purchased:
Select P.Passenger_ID, Passenger_Name, Ticket_Price
From Passenger P, Ticket_Purchase T
Where P.Passenger_ID = T.Passenger_ID
Group By P.Passenger_ID, Passenger_Name, Ticket_Price
Having Ticket_Price >= All (Select Max(Ticket_Price)
From Ticket_Purchase
Group By Ticket_Price);
Passenger_ID Passenger_Name Ticket_Price
---------------------------------------
132812298 Nice,Richard 1750.00
234890032 Franco,Sylvia 1750.00
339209841 Kim,Jongouk 1750.00
385894857 Uribe,Gloria 1750.00
(4 row(s) affected)
I now want to be able to only choose the Passenger_ID's from above who are not listed in another table called Frequent_Flier, which should leave me with only 2 records not 4.
I am wondering if I add the below to the first query to eliminate those passengers in the Frequent_Flier table:
NOT IN (Select Passenger_ID
From Frequent_Flier);
When I add it to the Where clause I get an error. Should I be sub-querying that differently or is there a better way to do this.
Thanks for any help you can offer.
View 4 Replies
View Related
Nov 13, 2006
Employee
EMPLOYEE_IDLAST_NAMEFIRST_NAMEMIJOB_ID MANAGER_IDHIRE_DATESALARYCOMMISIONDEPARTMENT_ID PHONE_NUMBER
Job
JOB_IDFUNCTION JOB_TYPE
Department
DEPARTMENT_IDNAMELOCATION_ID
Location
LOCATION_IDREGIONAL_GROUP
Here are the different tables in my database and Im trying to get a list of all the managers last names with the last names of the people that the manager manages. FUNCTION describes who is a manager and who has other positions. You can link the two tables together with Job_ID.
Im stuck on this, Im a noob at SQL. Please help
View 2 Replies
View Related
Feb 3, 2008
I want to fill in a field whose name is stored in a variable. This code runs, but the field is not filled in afterward. I think I'm doing something wrong:
SET @field = N'bindery'
SET @ordernum = N'SM38948M08'
UPDATE Orders
SET @field = GETDATE() + 5
WHERE ordernum = @ordernum
My problem is related to using the @field variable in the UPDATE query.
How do I fix this?
Thanks!
Brian
View 8 Replies
View Related
Jun 28, 2005
I have the following query created in MS Access that I would like to convert to MS SQL Server, but I can't get the IF logic to work properly, any help you can provide would be greatly appreciated.
Code:
SELECT Customer.Last_Name, Customer.First_Name, Customer.Middle_Name, Customer.Address, Customer.City, Customer.Region, Customer.Postal_Code, Customer.Country, Orders.Order_ID, Customer.Customer_ID, Employees.LastName, Employees.FirstName, Order_Line.Item_ID, Item.[Long Description], Order_Line.Units_Purchased, Order_Line.Price, Order_Line.Discount, CCur(Order_Line.Price*[Units_Purchased]*(1-[Discount])/100)*100 AS ExtendedPrice, Store.Store_Address, Store.Store_City, Store.Store_State, Store.Store_Zip_code, Store.Store_Phone_Number, Store.Store_Fax_Number, Item.Taxable_Nontaxable,
IIf(Item.Taxable_Nontaxable=Yes,([ExtendedPrice]*Tax_Table.Tax_Rate),([ExtendedPrice]*0)) AS Tax_Amt,
Tax_Table.Tax_Rate
View 3 Replies
View Related
Mar 20, 2007
Hi,
I am having trouble getting my query right. i am using a stored procedure to retrieve this data and bind it to my grid view.
Problem: I can't associate a field with a column that i am returning with my record set.
Details: I have query that i want to return 9 columns (UserName, Pre-Approved, Processing, Underwriting, Conditioned, Approved, Docs Out, Docs Back, Conditions Met). The username column lists all loan agents. I want the other 8 columns to list the name of the borrower (crestline..borrower.lastname) that is associate with that loan agent and that loan state. Each time a record is found where there is a valid loan agent (UserName) that meets the 'where' conditions, there will be a borrower. the 'LoanKey' field is a primary key that lets me get the borrower name from the borrower table. I dont know how to construct my query such that those borrower names get associated with their respective column header.
if the query works, my Gridview should look like this ('Name' refers to the borrower name)
UserName | Pre-Approved | Processing | UnderWriting | Conditioned | Approved | Docs Out | Docs Back | Conditions Met
Bob | | | | Name | | | |
Bob | | Name | | | | | |
Bob | | | | | | | Name |
Steve | | | Name | | | | |
Steve | | | | | | Name | |
Here is my sql call:
SELECT cfcdb..users.username, crestline..borrower.lastname,CASE WHEN crestline..loansp.LoanStatus='Pre-Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Pre-Approved',CASE WHEN crestline..loansp.LoanStatus='Processing' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Processing',CASE WHEN crestline..loansp.LoanStatus='Underwriting' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Underwriting',CASE WHEN crestline..loansp.LoanStatus='Conditioned' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditioned',CASE WHEN crestline..loansp.LoanStatus='Approved' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Approved',CASE WHEN crestline..loansp.LoanStatus='Docs Out' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Out',CASE WHEN crestline..loansp.LoanStatus='Docs Back' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Docs Back',CASE WHEN crestline..loansp.LoanStatus='Conditions Met' THEN crestline..loansp.LoanStatus ELSE NULL END AS 'Conditions Met'FROM cfcdb..usersinner join (crestline..loansp inner join crestline..borrower on crestline..loansp.loankey = crestline..borrower.loankey)on crestline..loansp.fstnamelo=cfcdb..users.firstname AND crestline..loansp.lstnamelo=cfcdb..users.lastnameinner join cfcdb..users_roleson cfcdb..users.username = cfcdb..users_roles.usernamewhere cfcdb..users.active = 1 AND cfcdb..users_roles.groupid = 'agent'AND crestline..loansp.enloanstat <> 'Closed' AND crestline..loansp.enloanstat <> 'Cancelled' AND crestline..loansp.enloanstat <> 'Declined' AND crestline..loansp.enloanstat <> 'On Hold'order by cfcdb..users.username asc
View 2 Replies
View Related
Feb 25, 2001
HI, i am trying to make query that has computations with it. but when there's a point computing between int and float i had to use cast() function to convert certain data types. somehow it only works on converting float to integer because when i'm converting an integer into float inorder to be computed with a float it bombs. my query is like this ....
SELECT cast(((cast(((lat - (SELECT LAT FROM TPS_ZIPUSA WHERE ZIP_CODE = 00210)) * 69.1) AS int) ^ 2) + (cast((69.1 * (lng - (SELECT Lng FROM TPS_ZIPUSA WHERE ZIP_CODE = 00210)) * (COS((SELECT LAT FROM TPS_ZIPUSA WHERE ZIP_CODE = 00210) / 57.3))) AS int) ^ 2)) AS float) ^ .5
FROM TPS_ZIPUSA
.5 is where the query bombs. any idea why is this happenning?
by the way, i'm using sql server 7.0.
francis,
View 2 Replies
View Related
Nov 26, 2007
Given the following tables:
[Members]
-memberID (PK)
-memberName
[Questions]
-questionID (PK)
-questionText
[Surveys]
-surveyID (PK)
-surveyName
-surveyDescription
-surveyType (FK)
[SurveyQuestions]
-surveyID (PK/FK)
-questionID (PK/FK)
[SurveyQuestionMemberResponse]
-surveyID (PK/FK)
-memberID (PK/FK)
-questionID (PK/FK)
-yesResponse(bit)
-noResponse(bit)
-undecidedResponse(bit)
How can I write a query to return the results for a given survey for all members (including members who have not given responses) given the surveyID.
In the [SurveyQuestionMemberReponse] table I record survey results for any members who have answered the survey. However, if a member has not responsed to the survey they will not have a record in this table.
I want to return a list of members with their response to each question in the survey. If a member has not given a response I would like to indicate they have not responded to the survey and they should still appear in the list.
When I attempt to write a query to UNION the results of a query aimed at gathering all of the results in the [SurveyQuestionMemberReponse] to all of the people in the [Members] table I recieve an error when I include the questionText field in my result set.
The error indicates:
The text data type cannot be selected as DISTINCT because it is not comparable.
Can someone please point me in the right direction. I suspect I am going about this all wrong.
[NOTE] The 'surveyType' in the [Surveys] table indicates which subset of members a given Survey should be available to. For this example let's just assume that every survey should belong to all members.
Thanks,
Zoop
View 3 Replies
View Related
Aug 21, 2007
I'm working with a database that is poorly normalized and am doing my best to increase the speed of our queries (changing the database itself is not an option right now). Any help with the following situation would be very much appreciated.
There are two tables involved, described below.
DataTable:
Code Snippet
CodeA char(4),
CodeB char(4),
CodeC char(2),
ColA float,
ColB float,
ColC float,
...
ColZ float
NameTable:
Code Snippet
Abbr char(2),
FullName varchar(50)
In the DataTable, the columns named ColA, ColB, ColC, etc., are described in the NameTable where Abbr would be A, B, C, etc., and FullName would be a "nice" text version describing what's stored in that column. For instance, a record in the NameTable might include Abbr = 'A' and FullName = 'Computer Science', and that means that ColA in the DataTable refers to 'ComputerScience'.
The table I'm trying to optimize the creation of in our ASP.NET application needs to have column headings that could be retrieved like this:
SELECT DISTINCT CodeB, CodeC FROM DataTable WHERE CodeA = @CodeA
(Note that CodeC is really just a different representation of CodeB--think 4-digit year vs. 2-digit year--for any given CodeA.)
The row headings for the table could be retrieved like this:
SELECT FullName FROM NameTable
The cells of the table at any given intersection of a row heading and a column heading can be retrieved like this:
SELECT Col? FROM DataTable WHERE CodeA = @CodeA AND CodeB = @CodeB (this selects a single value)
Where the ? of Col? is determined by the Abbr version of FullName shown in the row heading, and @CodeB is determined by CodeB from the column heading.
Right now this table is generated using a lot of loops in the code of the page that require it to query the database for nearly every cell in the table. Even with this poor database design, there has to be a better way than that. I'm hoping there is a way to create a stored procedure that uses temporary tables and joins, or views, or something like that to create the table on the SQL Server and just send the data to the ASP.NET page in a form that can be directly databound to a GridView.
Thanks in advance for any help!
-Mathminded
View 1 Replies
View Related
Apr 13, 2006
Please help.
Has anyone seen a problem querying Excel or Access database when the "LIKE" clause is used with the "*" wildcard? The problem I'm seeing is that the query fails to return a dataset whenever "*" wildcard is used.
For Example,
sQry="Select * From [EmployeeData$] WHERE Id LIKE 'AAA'" 'query WORKS
sQry="Select * From [EmployeeData$] WHERE Id LIKE 'AAA*'" 'query does NOT WORK
Assume that Table name is "EmployeeData", with "ID", "Name" and "Birthdate" as Fields.
Data:
ID Name Birthdate
AAA
Aaron
5/4/1975
CCC
Charlie
10/14/1948
DDD
Deloris
7/19/1998
The code I use is listed as follows:
Imports System.Data.OleDb
Imports System.Data
Public Class Form1
Private m_sConn1 As String = "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=C:ExcelData1.xls;" & _
"Extended Properties=""Excel 8.0;HDR=YES"""
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
'Use a DataSet to Query data from the EmployeeData table.
Dim QryConn As New OleDbConnection(m_sConn1)
'Dim strQry as string ="Select * From [EmployeeData$] WHERE Id LIKE 'AAA'" '- works
Dim strQry as string ="Select * From [EmployeeData$] WHERE Id LIKE 'AA*'" ' does not work
Dim da As New OleDbDataAdapter(strQry, QryConn)
Dim ds As DataSet = New DataSet
da.Fill(ds)
Dim dr As DataRow
For Each dr In ds.Tables(0).Rows 'Show results in output window
Debug.WriteLine(dr("Id") & ", " & dr("Name") & ", " & dr("Birthdate"))
'Expected output:
'AAA
Aaron
5/4/1975
Next
QryConn.Close()
End Sub
End Class
View 1 Replies
View Related
Nov 1, 2006
HiI'm having problems following the tutorial on creating a data access layer - http://www.asp.net/learn/dataaccess/tutorial01cs.aspx?tabid=63 - when I try to compile in Visual Studio 2005 I get namespace could not be found. I followed exactly the tutorial - I created a dataset and added this code in my aspx page. <asp:GridView ID="GridView1" runat="server" CssClass="DataWebControlStyle"> <HeaderStyle CssClass="HeaderStyle" /> <AlternatingRowStyle CssClass="AlternatingRowStyle" />In my C# file I added these lines... using NorthwindTableAdapters; <<<<<this is the problem - where does this come from? protected void Page_Load(object sender, EventArgs e) { ProductsTableAdapter productsAdapter = new ProductsTableAdapter(); GridView1.DataSource = productsAdapter.GetProducts(); GridView1.DataBind(); }Thanks in advance
View 6 Replies
View Related
Sep 25, 2007
HiI'm trying to convert an SQL Query from Access to SQL Server. TheAccess Query goes like this:SELECT Format(EntryDate, 'ddd mm dd') AS [Day]FROM JournalEntriesThis query returns the name of the day followed by month and date (Suaug 21)What would this be like in SQL Server ? What style id do I have to useto get the correct format ?RegardsRune
View 1 Replies
View Related
Jul 23, 2005
Can someome please advise what the equivalent query would be inMicrosoft SQL Server ... I've tried a number of combinations with nosuccess ... Thanks, Ralph Noble (ralph_noble@hotmail.com)================UPDATE INVENTORYINNER JOIN SALES ON (INVENTORY.BAR_CODE = SALES.BAR_CODE)AND (INVENTORY.PRODUCT_NBR = SALES.PRODUCT_NBR)SET INVENTORY.DATE_PURCHASED = "20050127"WHERE (((SALES.SOLD)="20050127"));
View 1 Replies
View Related
Aug 17, 2006
Hi,I'm trying to convert MS Access 97 .mdb application to Access 2003 .adpapplication with SQL Server as Backend.I'm having trouble converting Access Query into SQL Query. The Query isgiven below:~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~SELECT DISTINCTROW Buildings.BuildingNumber,First(Buildings.BuildingName) AS FirstOfBuildingName,First(OwnershipCodes.OwnershipCode) AS FirstOfOwnershipCode,First(OwnershipCodes.OwnershipDesc) AS FirstOfOwnershipDesc,First(CityCodes.CityName) AS FirstOfCityName,First(CountyCodes.CountyName) AS FirstOfCountyName,First(Buildings.Address) AS FirstOfAddress,First(Buildings.YearConstructed) AS FirstOfYearConstructed,First(Buildings.DateOccupancy) AS FirstOfDateOccupancy,First(Buildings.NumberLevels) AS FirstOfNumberLevels,First(Buildings.BasicGrossArea) AS FirstOfBasicGrossArea,Sum(Rooms.AssignableSquareFeet) AS SumOfAssignableSquareFeet,First(Buildings.UnrelatedGrossArea) AS FirstOfUnrelatedGrossArea,First(Buildings.SpecialArea) AS FirstOfSpecialArea,First(Buildings.CoveredUnenclosedGrossArea) ASFirstOfCoveredUnenclosedGrossAreaFROM CountyCodes INNER JOIN (OwnershipCodes INNER JOIN (ConditionCodesINNER JOIN ((CityCodes INNER JOIN Buildings ON CityCodes.CityCode =Buildings.CityCode) LEFT JOIN Rooms ON Buildings.BuildingNumber =Rooms.BuildingNumber) ON ConditionCodes.ConditionCode =Buildings.ConditionCode) ON OwnershipCodes.OwnershipCode =Buildings.OwnershipCode) ON CountyCodes.CountyCode =CityCodes.CountyCodeGROUP BY Buildings.BuildingNumber;~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~Please can any one tell me substitue for First Function in Acess to SQLFunction.Any help is appreciated.Thanks,S
View 3 Replies
View Related
