table2 is intially populated (basically this will serve as historical table for view); temptable and table2 will are similar except that table2 has two extra columns which are insertdt and updatedt
process: 1. get data from an existing view and insert in temptable 2. truncate/delete contents of table1 3. insert data in table1 by comparing temptable vs table2 (values that exists in temptable but not in table2 will be inserted) 4. insert data in table2 which are not yet present (comparing ID in t2 and temptable) 5. UPDATE table2 whose field/column VALUE is not equal with temptable. (meaning UNMATCHED VALUE)
* for #5 if a value from table2 (historical table) has changed compared to temptable (new result of view) this must be updated as well as the updateddt field value.
Hi SQL fans,I realized that I often encounter the same situation in a relationdatabase context, where I really don't know what to do. Here is anexample, where I have 2 tables as follow:__________________________________________ | PortfolioTitle|| Portfolio |+----------------------------------------++-----------------------------+ | tfolio_id (int)|| folio_id (int) |<<-PK----FK--| tfolio_idfolio (int)|| folio_name (varchar) | | tfolio_idtitle (int)|--FK----PK->>[ Titles]+-----------------------------+ | tfolio_weight(decimal(6,5)) |+-----------------------------------------+Note that I also have a "Titles" tables (hence the tfolio_idtitlelink).My problem is : When I update a portfolio, I must update all theassociated titles in it. That means that titles can be either removedfrom the portfolio (a folio does not support the title anymore), addedto it (a new title is supported by the folio) or simply updated (atitle stays in the portfolio, but has its weight changed)For example, if the portfolio #2 would contain :[ PortfolioTitle ]id | idFolio | idTitre | poids1 2 1 102 2 2 203 2 3 30and I must update the PortfolioTitle based on these values :idFolio | idTitre | poids2 2 202 3 352 4 40then I should1 ) remove the title #1 from the folio by deleting its entry in thePortfolioTitle table2 ) update the title #2 (weight from 30 to 35)3 ) add the title #4 to the folioFor now, the only way I've found to do this is delete all the entriesof the related folio (e.g.: DELETE TitrePortefeuille WHERE idFolio =2), and then insert new values for each entry based on the new givenvalues.Is there a way to better manage this by detecting which value has to beinserted/updated/deleted?And this applies to many situation :(If you need other examples, I can give you.thanks a lot!ibiza
I have 2 identical tables one contains current settings, the other contains all historical settings.I could create a union view to display the current values from table A and all historical values from table B, butthat would also require a Variable to hold the tblid for both select statements.
Q. Can this be done with one joined or conditional select statement?
DECLARE @tblid int = 501 SELECT 1,2,3,4,'CurrentSetting' FROM TableA ta WHERE tblid = @tblid UNION SELECT 1,2,3,4,'PreviosSetting' FROM Tableb tb WHERE tblid = @tblid
I have created a table Table with name as Varchar and id as int. Now i have started inserting the rows like, insert into Table values ('arun',20).Yes i have inserted a row in the table. Now i have got the values " arun's ", 50. insert into Table values('arun's',20) My sqlserver is giving me an error instead of inserting the row. How will you solve this problem?
I am relatively new to SQL and as a project I have been asked to create the SQL for a simple database to record train details. I want to implement a check constraint which will prevent data from being inserted into a table if the weight of the train is more than the maximum towing weight of the locomotive. FOr instance, I need to add the unladen weight and maximum capacity of each wagon (located in the wagon type table) and compare it against the locomotive maximum pulling weight (the locomotive class table). I have the following SQL but it will not work:
check((select SUM(fwt.unladen_weight+fwt.maximum_payload) from hauls as h,freight_wagon as fw,freight_wagon_type as fwt,train as t where h.freight_wagon_serial_number = fw.freight_wagon_serial_number and fw.freight_wagon_type = fwt.freight_wagon_type and h.train_number = t.train_number) < (select lc.maximum_towing_weight from locomotive_class as lc,locomotive as l,train as t where lc.locomotive_class = l.locomotive_class and l.locomotive_serial_number = t.locomotive_serial_number))
The hauls table is where the constraint has been placed and is the intermediary table between train and freight wagon.
I may not have explained this very well; but in short, i need to compare the sum of two values in one table against a values located in another table...At present I keep getting a message telling me the sub query cannot return more than one row.
I have a table #vert where I have value column. This data needs to be updated into two channel columns in #hori table based on channel number in #vert table.
CREATE TABLE #Vert (FILTER VARCHAR(3), CHANNEL TINYINT, VALUE TINYINT) INSERT #Vert Values('ABC', 1, 22),('ABC', 2, 32),('BBC', 1, 12),('BBC', 2, 23),('CAB', 1, 33),('CAB', 2, 44) -- COMBINATION OF FILTER AND CHANNEL IS UNIQUE CREATE TABLE #Hori (FILTER VARCHAR(3), CHANNEL1 TINYINT, CHANNEL2 TINYINT) INSERT #Hori Values ('ABC', NULL, NULL),('BBC', NULL, NULL),('CAB', NULL, NULL) -- FILTER IS UNIQUE IN #HORI TABLE
One way to achieve this is to write two update statements. After update, the output you see is my desired output
UPDATE H SET CHANNEL1= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=1 -- updates only channel1 UPDATE H SET CHANNEL2= VALUE FROM #Hori H JOIN #Vert V ON V.FILTER=H.FILTER WHERE V.CHANNEL=2 -- updates only channel2 SELECT * FROM #Hori -- this is desired output
my channels number grows in #vert table like 1,2,3,4...and so Channel3, Channel4....so on in #hori table. So I cannot keep writing too many update statements. One other way is to pivot #vert table and do single update into #hori table.
The objective is to identify orders where an order fee has been applied incorrectly. I have multiple orders per customer, my table contains an orderID and a customerID. Currently if the customer places additional orders before the previous orders have been closed/cancelled, then additional fees are being applied.
Let's say I'm comparing order #1 to order #2. I need to identify these rows where the following is true:-
The CustID is the same.
Order #2 has a more recent order date.
Order #2 has a FeeDate Before the CancelledDate of Order #1 (or Order #1 has no cancellation date).
So in the table the orderID:2835692 of CustID: 24643 has a valid order fee. But all the subsequently placed orders have fees which were applied before the first order was cancelled and so I want to update the FeeInvalid column with a 'Y'. The first fee will always be valid.
I think I understand why the code I am trying doesn't achieve the result I want but I can't figure out how to write it correctly. Below is one example of code I've tried and also code to create the table and insert some test data.
update t1 SET FeeInvalid = 'Y' FROM MockData t1 Join MockData t2 on t1.CustID = t2.CustID WHERE t1.CustID = t2.CustID AND t2.OrderDate > t1.OrderDate AND t2.FeeDate > t1.CancelledDate CREATE TABLE [dbo].[MockData]( [OrderID] [float] NULL,
Hi,I have table with three columns as belowtable name:expNo(int) name(char) refno(int)I have data as belowNo name refno1 a2 b3 cI need to update the refno with no values I write a query as belowupdate exp set refno=(select no from exp)when i run the query i got error asSubquery returned more than 1 value. This is not permitted when thesubquery follows =, !=, <, <= , >, >= or when the subquery is used asan expression.I need to update one colum with other column value.What is the correct query for this ?Thanks,Mani
My question is: How can I insert a row for each unique TemplateId. So let's say I have templateIds like, 2,5,6,7... For each unique templateId, how can I insert one more row?
I am looking for a Sql query to verify the inserted values from one table(in CSV file) with another table(in sql database)
For example: I have below Values column that is present in once CSV file, after my data migration the values get stored in Results table under Message column.
I need to very whether values(1X,1Y) are inserted in Message record "successfully inserted value 1X"
Values (CSV) 1X 1Y
Results Table(SQL) CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point 2015-08-04 08:35:29.203 successfully inserted value 1Y 2015-08-04 08:30:29.203 Test Pass 2015-08-04 08:28:29.203 successfully inserted value 1Y
If all values are inserted:
Output: All values from values table are inserted successfully Total count of values inserted: 2 If only few values are inserted, example only 1X from Values table is inserted in Message
Example: Results Table CreatedDate Message 2015-08-04 08:45:29.203 successfully inserted value 1X 2015-08-04 08:44:29.103 TEst pass 2015-08-04 08:43:29.103 successfully inserted value 1X 2015-08-04 08:42:29.203 test point
Output: All values from values are not inserted successfully in result table. Total count of values inserted: 1 Missing Values not inserted in results table are: 1Y
The SP UserPersist_GetByCriteria does a "SELECT * FROM tbl_User WHERE gender = @Gender AND culture = @Culture", so why am I receiving this error when both tables have the same structure?
The error is being reported as coming from UserPersist_GetByCriteria on the "SELECT * FROM tbl_User" line.
I'm using an ObjectDataSource in Visual Studio to retrieve records from a SQL Server 2005 database. I have a very simple dilemma. In a table I have fields FirstName, Surname, Address1, Address2, Address3 etc. None of these are mandatory fields. It is quite common for the user not to enter data in Address2, Address3, so the values are <null> in the SQL table. In Visual Studio 2005 I have an aspx form where users can pass search parameters to the ObjectDataSource and the results are returned according to the passed in parameters. The WHERE clause in my Table Adapter is:WHERE (Address1 LIKE @Address1 + '%') AND (Address2 LIKE @Address2 + '%') AND (Address3 LIKE @Address3 + '%') AND (FirstName LIKE @FirstName + '%') AND (Surname LIKE @Surname + '%') If, for example, I simply want to search WHERE FirstName LIKE ‘R’, this does not return any results if the value of Address3 is <null> My query is this: Could someone please show me the best way in Visual Studio 2005 to return records even if one of the Address fields is <null>. For reference, I have tried: Address3 LIKE @Address3 + '%' OR IS NULLThis does work, however itsimply returns every instance where Address3 is <null> (accounting for about 95% of the records in the database). Thanks in advance Simon
I need Insert rows in the OrderDetails Table based on values in the Orders Table
In the Orders table i have a columns called OrderID and ISale. In the OrdersDetails i have columns called OrderID and SaleType
For each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 1, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value K and another row with the value KD. That is a row will be added and the value in the SalesType column will be K, also a second row will be added and the value in the SalesType column will be KD
Also for each value in the OrderID Column of the Orders Table, anytime the ISale Column in the Orders table = 0, and the SalesType column in the OrderDetails table is empty, I want to add two rows in the OrderDetails table. One row with the value Q and another row with the value QD That is a row will be added and the value in the SalesType column will be Q, also a second row will be added and the value in the SalesType column will be QD.
I imported a SQL Table into SQL DataBase, But I can not update this table even with SQL Server management Studio When I change any data on mentioned table above, Red exclamation sign appears left of the record . How can I correct this problem? Thanks.
This program gets the values of A and B passed in. They are for table columns DXID and CODE. The textbox GET1 is initialized to B when the page is loaded. When I type another value in GET1 and try to save it, the original initialized value gets saved and not the new value I just typed in. A literal value, like "222" saves but the new GET1.TEXT doesn't.
I have contract table which has built in foreign key constrains. How can I alter this table for delete/ update cascade without recreating the table so whenever studentId/ contactId is modified, the change is effected to the contract table.
Thanks
************************************************** ****** Contract table DDL is
create table contract( contractNum int identity(1,1) primary key, contractDate smalldatetime not null, tuition money not null, studentId char(4) not null foreign key references student (studentId), contactId int not null foreign key references contact (contactId) );
I am trying to use a stored procedure to update a column in a sql table using the value from a variable table I getting errors because my syntax is not correct. I think table aliases are not allowed in UPDATE statements.
This is my statement:
UPDATE [dbo].[sessions_teams] stc SET stc.[Talks] = fmt.found_talks_type FROM @Find_Missing_Talks fmt WHERE stc.sessionid IN (SELECT sessionid FROM @Find_Missing_Talks) AND stc.coupleid IN (SELECT coupleid FROM @Find_Missing_Talks)
I have a scenario where I have to Update a table with date when there are new records in another table
For example:
I load ODS table with the data from a file in SSIS. the file has CustomerID and other columns.
Now, when there is new record for any customerID in Ods, then Update the dbo table with the most recent record for every CustomerID(i.e. update the date column in dbo for that customerID). Also Include an Identifier that relates back to the ODS table. How do I do this?
I am trying to update one table when records are inserted in another table.
I have added the following trigger to the table “ProdTr” and every time a record is added I want to update the field “Qty3” in the table “ActInf” with a value from the inserted record.
My problem appears to be that I am unable to fill the variables with values, and I cannot understand why it isn’t working, my code is:
ALTER trigger [dbo].[antall_liter] on [dbo].[ProdTr] for insert as begin declare @liter as decimal(28,6)
Hi, Is this anyway to finding updated/ deleted recored using anyother data flow transformation tasks without using sql task. Can find the new records using merge join task.
Is there better way to merge master table using staging table?
We need to Insert/Update a Fact Table from staging Table. currently we are using a SP which update Fact Table for Each region. this process is schedule, every 5 min job is run and Update fact table.but time of Insert and Update too long from staging to Fact, currently we are using merge statement for Insert and update.in my sp we are looping number how many region we need to update and at a time single Region we are updating using while loop in current SP.
I would like to update the flag of the promotion ID should the promotion ID date range overlap with Promotion ID(All) Date Range. The general logic is as below.
Update TableName SET PromotionID Flag = 1 AND Reason = 'Overlap with row ID(Overlap row ID number)' Where EACH ROW(Except with Promotion ID ALL) Date Range Overlap with ROW(with promotion ID ALL) Date range
