- Operating System Minimum Level Requirement (Success)
Messages
* Operating System Minimum Level Requirement
* Check Passed
- Operating System Service Pack Level Requirement. (Success)
Messages
* Operating System Service Pack Level Requirement.
* Check Passed
- SQL Server Edition Operating System Compatibility (Warning)
Messages
* SQL Server Edition Operating System Compatibility
* Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
* The current system does not meet the minimum hardware requirements for this SQL Server release. For detailed hardware and software requirements, see the readme file or SQL Server Books Online.
* Microsoft Internet Information Services (IIS) is either not installed or is disabled. IIS is required by some SQL Server features. Without IIS, some SQL Server features will not be available for installation. To install all SQL Server features, install IIS from Add or Remove Programs in Control Panel or enable the IIS service through the Control Panel if it is already installed, and then run SQL Server Setup again. For a list of features that depend on IIS, see Features Supported by Editions of SQL Server in Books Online.
- Internet Explorer Requirement (Success)
Messages
* Internet Explorer Requirement
* Check Passed
- COM Plus Catalog Requirement (Success)
Messages
* COM Plus Catalog Requirement
* Check Passed
- ASP.Net Version Registration Requirement (Success)
Messages
* ASP.Net Version Registration Requirement
* Check Passed
- Minimum MDAC Version Requirement (Success)
Messages
* Minimum MDAC Version Requirement
* Check Passed
furthermore i get error 26 when trying to create new sql server database. and while doing the SQL server surface area configuration i got this message.:
SQL Server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)
------------------------------
Program Location:
at Microsoft.SqlSac.MainPanel.FormFeatures..ctor(String machineName, Form callingForm)
HOpefully somebody out there will help me...or is this problem only appearing in sql server 2005 and would it be a better decision to install SQL server 2000...or if someone can help me rectify this problem i'll be really thankful.
I have installed sqlserver 2005 using the standard msdn universal installation discs on my laptop running vista business.
The mssqlserver service will not start automatically as the setup configures it and I cannot start the service manually because I get the 'Access Denied' error message
I am logged on the the computer with adminstration privileges
I am trying to start ms sql server 2005 express as a network user from originally starting as local system. I cannot start the service.
I have given this network user administrator access to sql express from the sql server surface area configuration "Add New Administrator". I have went into the local users/groups and added this network user to the 3 security groups
The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid.
I receive five errors in the event logs/application
EventID: 26014
Unable to load user specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
EventID: 17182
TDSSNIClient initialization failed with error 0x80092004, status code 0x80
EventID: 17182 TDSSNIClient initialization failed with error 0x80092004, status code 0x1
EventID: 17826
Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately prceding this one in the error log.
EventID: 17120
SQL Server could not spawn the FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I don't recall assigning any sql specific certificates. The reason I'm trying to run this as a network user is because an application on a remote windows server requires it.
After starting the service back running as local system as it was before, I went into the SQL Server Management Studio Express and edited the properties for this new network user I wish to run the service as. I gave him full access including checking all grants in securables.
I now see a bit of a difference in the event logs with these errors.
EventID: 17058
initerrlog: Could not open the log file 'c:Program FilesMicrosoft SQL ServerMSSQL1MSSQLLOGERRORLOG.' Operating system error =5(Access is denied).
I saw a notification when changing the sql server service's logon that the new network user has been granted the log on locally right.
The second and last new error is
EventID: 17053
UpdateUptimeRegKey: Operating system error 5(Access is denied.) encountered.
I'm running VS2005prof.+sp1, SSE Adv (with sp2) SSE ToolKit. Its been running without problems since installation (April 12.2007) Last week I ran into a problem which started off as
"An attempt to attach an auto-named database for file D:DataVBNetVisual Studio 2005ProjectSolutionsAR1403inDebuginDebugApp_DataAR1403.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
and went down hill rapidly to the point now where I can't even start it up. Here's the error log:
2007-07-21 22:51:07.55 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Express Edition on Windows NT 5.1 (Build 2600: Service Pack 2)
2007-07-21 22:51:07.55 Server (c) 2005 Microsoft Corporation. 2007-07-21 22:51:07.55 Server All rights reserved. 2007-07-21 22:51:07.55 Server Server process ID is 2656. 2007-07-21 22:51:07.55 Server Authentication mode is WINDOWS-ONLY. 2007-07-21 22:51:07.56 Server Logging SQL Server messages in file 'c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-07-21 22:51:07.56 Server This instance of SQL Server last reported using a process ID of 304 at 7/21/2007 5:42:20 PM (local) 7/21/2007 9:42:20 PM (UTC). This is an informational message only; no user action is required. 2007-07-21 22:51:07.66 Server Registry startup parameters: 2007-07-21 22:51:07.66 Server -d c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-07-21 22:51:07.66 Server -e c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-07-21 22:51:07.66 Server -l c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-07-21 22:51:07.75 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-07-21 22:51:07.75 Server Detected 1 CPUs. This is an informational message; no user action is required. 2007-07-21 22:51:07.86 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-07-21 22:51:08.02 Server Database mirroring has been enabled on this instance of SQL Server. 2007-07-21 22:51:08.04 spid5s Starting up database 'master'. 2007-07-21 22:51:08.70 spid5s SQL Trace ID 1 was started by login "sa". 2007-07-21 22:51:08.85 spid5s Starting up database 'mssqlsystemresource'. 2007-07-21 22:51:08.99 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-07-21 22:51:09.51 spid8s Starting up database 'model'. 2007-07-21 22:51:09.51 spid5s Server name is 'ADSSQLEXPRESS'. This is an informational message only. No user action is required. 2007-07-21 22:51:09.52 spid5s Starting up database 'msdb'. 2007-07-21 22:51:10.08 Server Error: 17190, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server FallBack certificate initialization failed with error code: 1. 2007-07-21 22:51:10.08 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-07-21 22:51:10.08 Server Error: 17182, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-07-21 22:51:10.08 Server Error: 17826, Severity: 18, State: 3. 2007-07-21 22:51:10.08 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-07-21 22:51:10.08 Server Error: 17120, Severity: 16, State: 1. 2007-07-21 22:51:10.08 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
-----------
I've tried following various suggestions I found on the Net, however, after 3-days it does seem as though I'm not getting anywhere. Shoud I uninstall and re-install SSE and if so is there a specific step by step step procedure I can follow. Or is there a sure fire way to fix the probelm without re-installation?
I am trying to 'load' a copy of a SQLServer 2000 database to SQLServer 2005 Express (on another host). The copy was provided by someone else - it came to me as a MDF file only, no LDF file.
I have tried to Attach the database and it fails with a failure to load the LDF. Is there any way to bypass this issue without the LDF or do I have to have that?
The provider of the database says I can create a new database and just point to the MDF as the data source but I can't seem to find a way to do that? I am using SQL Server Management Studio Express.
I have an app that uses a sqlserver 2000 jdbc driver to connect to a sqlserver 2000.
Is it possible to do a direct replacement of sqlserver 2000 with sqlserver 2005 express just by reconfiguring the app to point to the express? The app would still be using the sqlserver 2000 jdbc driver to try and make the connection.
If that is a possibility, what can be some differences in the configuration? Previously with 2000 the config information I entered is:
server name: "machinename"( or ip). I've also tried "machiname/SQLEXPRESS"
DB name: name of db instance
port: 1433(default)
user and pass.
My attempts so far results in
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket."
and
"java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Unable to connect. Invalid URL."
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows: One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29538 Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
i'm using a domain accout to setup a sql 2005 cluster in a win2003 cluster.when the installation ended,the SqlServerAgent service can't be started.the event in event viewer
is "SQLServerAgent could not be started (reason: Unable to connect to server "(local)"; LServerAgent cannot start). " (event id 103 ,source sqlserveragent).I try to use local system and network service account to start it,but it's all the same.
And i found i can connect to the sql cluster vitrual ip 10.73.2.224,but can't connect to the node A.So i enable all the network protocols for the instance MSSQLSERVER,and also enable every ip in the TCP/IP protocol,then restart the sqlserver service,but it still doesn't work.
Hi can someone help me please? I browsed through the SP2 install feedback below, but it doesn't quite seem to fit what happened to my install. My .MDF and .LDF files for the system databases are in C:Program FilesMicrosoft SQL ServerMSQL.1MSQLData (I presume this is the correct location.)
I am the local administrator on this box.
I uploaded the .CAB file with all the logs onto www.sendspace.com if it gives you something to go on.
The only other thing of note is that it said there were two machines on the network and that I needed to change my machine name in the control panel when I installed. This doesn't seem right, as far as I understand the computer name is unique.
The SQL Server runs under the local system account, if that is of any use.
I attempted uninstalling and reinstalling the SQL native client MSI package in the hope it would be a simple fix similar to that chap further down the page, but that didn't help at all either.
.CAB file of installation logfiles is here: http://www.sendspace.com/file/7ihoet
kind regards Jason
ERRORLOG starting SQL Server post failed SP2 install
2007-06-12 19:55:21.94 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-06-12 19:55:21.96 Server (c) 2005 Microsoft Corporation. 2007-06-12 19:55:21.96 Server All rights reserved. 2007-06-12 19:55:21.97 Server Server process ID is 5468. 2007-06-12 19:55:21.97 Server Authentication mode is MIXED. 2007-06-12 19:55:21.97 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-06-12 19:55:21.97 Server This instance of SQL Server last reported using a process ID of 5756 at 12/06/2007 19:36:35 (local) 12/06/2007 18:36:35 (UTC). This is an informational message only; no user action is required. 2007-06-12 19:55:21.97 Server Registry startup parameters: 2007-06-12 19:55:21.99 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-06-12 19:55:21.99 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-06-12 19:55:21.99 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-06-12 19:55:22.00 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-06-12 19:55:22.00 Server Detected 4 CPUs. This is an informational message; no user action is required. 2007-06-12 19:55:22.17 Server Address Windowing Extensions is enabled. This is an informational message only; no user action is required. 2007-06-12 19:55:22.33 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-06-12 19:55:22.57 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-06-12 19:55:23.60 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-06-12 19:55:23.63 Server Database mirroring has been enabled on this instance of SQL Server. 2007-06-12 19:55:23.72 spid5s Starting up database 'master'. 2007-06-12 19:55:24.07 spid5s SQL Trace ID 1 was started by login "sa". 2007-06-12 19:55:24.11 spid5s Starting up database 'mssqlsystemresource'. 2007-06-12 19:55:24.13 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-06-12 19:55:24.29 spid5s Server name is 'GBLOND088SQ8MSQL_CREDS_DEV1'. This is an informational message only. No user action is required. 2007-06-12 19:55:24.29 spid9s Starting up database 'model'. 2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1. 2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1e. 2007-06-12 19:55:24.30 Server Error: 17182, Severity: 16, State: 1. 2007-06-12 19:55:24.30 Server TDSSNIClient initialization failed with error 0x34, status code 0x1. 2007-06-12 19:55:24.30 Server Error: 17826, Severity: 18, State: 3. 2007-06-12 19:55:24.30 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-06-12 19:55:24.30 Server Error: 17120, Severity: 16, State: 1. 2007-06-12 19:55:24.30 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I tried to connect Northwind.sdf from VB.NET 2005, though connection went right, I am getting an error like the following
Some updating commands could not be generated automatically. The database returned the following error : Failed to find or load the registered .Net Framework Data Provider
I checked the machine.config file and found the following entries under the DbProviderFactories
Code Block <DbProviderFactories>
<add name="SQL Server CE Data Provider" invariant="Microsoft.SqlServerCe.Client" description=".NET Framework Data Provider for Microsoft SQL Server 2005 Compact Edition" type="Microsoft.SqlServerCe.Client.SqlCeClientFactory, Microsoft.SqlServerCe.Client, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
<add name="SQL Server Compact Edition Data Provider" invariant="System.Data.SqlServerCe" description=".NET Framework Data Provider for Microsoft SQL Server Compact Edition" type="System.Data.SqlServerCe.SqlCeProviderFactory, System.Data.SqlServerCe, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
I had some issues on my server and had to uninstall .Net Framework 2.0, SQL Server 2005 Express, and SQL Express Toolkit. I installed SQL Server 2005 Express and it seemed to be ok.
Then my problems all started when I tried to install SQL Express Toolkit because I needed to install DTS Wizard again, and it errors out and wouldn't let me install it. So I uninstalled everything that's listed above again.
I then tried to install SQL Server 2005 Express again, and on the second from last screen, while its listing all the components and configuring them, I get the following error as it's configuring the last component... which was the SQL Server Database Services.
TITLE: Microsoft SQL Server 2005 Setup ----------------------------------------------------------- The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."
I tried to re-install the SQL Server Express another 7 times wth no luck.
If anyone can point me in the right direction I'd really appreciate it.
Hi! I am absolutely new in SQL! Pls help me answering some questions! I have Microsoft VB Express Edition 2005. So I created my Database1 and my own table Table1 ( by Add Item). 1)Now in "Show SQL Pane" I write my query. When I write it with error - it is deleting (after Execute or Verify). So I must write it again! How can I save my query (error query!) for not writing it again?
2) After several tries I succeed to write query without mistake. So I have a result ( Table2). Then I write another query and have Table3. How can I see my Table2 and IT'S QUERY??? Is there is a log option that can write all my queries and under every query - the result table in my session?
Thank u ! PS. Does Microsoft VB Express Edition 2005 contain SQL Server Management Studio?
I've tried downloading SQL Express 2005 but it will not install properly, stating that it is already installed. I cannot get the SQLExpress Service to start. I keep getting the message (The request failed or the service did not respond in a timely fashion). Can anyone help or point me in the right direction?
I currently have SQL Server Management Studio Express 2005 and would like to upgrade my machine to SQL Developer 2005 as easily as possible. Keeping my databases and such.
Any recommendations on the best way to do this would be greatly appreciated.
Hi, I have VS Pro 2005 and SQL Server Express 2005 installed on an XP Pro machine. When using VS 2005, in the 'Server Explorer' window I can see and attach to two SQL Server databases that I have set-up. But if I attempt to access the same databases from withn the 'Solution Explorer' window I get the following dialog box message,
" Required Component Missing (Dialog box heading)
Connections to SQL Server Files (*.mdf) require SQL Server Express to function properly. Please verify the installation of the component or download from the URL: http://go.microsoft.com/fwlink/?LinkId=49251 "
I have uninstalled and then reinstalled both VS 2005 and SQL Server Express twice but it has helped.
I don't understand why I'm getting this error because all of the server configuration tools and connection utilities seem to work fine but VS say's that SQL Server Express is not installed.
Thanks,
CLN
P.S. I had another application that required MSDE 2000A to be installed. When I removed the other application I also removed MSDE 2000A and that's when the problem began.
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
i get the above error when attepting to install reporting services
2006-03-26 20:33:09.42 Server Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86)
Oct 14 2005 00:33:37
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 5.0 (Build 2195: Service Pack 4)
2006-03-26 20:33:09.42 Server (c) 2005 Microsoft Corporation.
2006-03-26 20:33:09.42 Server All rights reserved.
2006-03-26 20:33:09.42 Server Server process ID is 2068.
2006-03-26 20:33:09.42 Server Logging SQL Server messages in file 'd:SQL Server 2005MSSQL.1MSSQLLOGERRORLOG'.
2006-03-26 20:33:09.42 Server This instance of SQL Server last reported using a process ID of 1624 at 3/26/2006 8:32:45 PM (local) 3/26/2006 12:32:45 PM (UTC). This is an informational message only; no user action is required.
2006-03-26 20:33:09.42 Server Registry startup parameters:
2006-03-26 20:33:09.42 Server -d d:SQL Server 2005MSSQL.1MSSQLDATAmaster.mdf
2006-03-26 20:33:09.43 Server -e d:SQL Server 2005MSSQL.1MSSQLLOGERRORLOG
2006-03-26 20:33:09.43 Server -l d:SQL Server 2005MSSQL.1MSSQLDATAmastlog.ldf
2006-03-26 20:33:09.43 Server Command Line Startup Parameters:
2006-03-26 20:33:09.43 Server -m SqlSetup
2006-03-26 20:33:09.43 Server SqlSetup
2006-03-26 20:33:09.43 Server -Q
2006-03-26 20:33:09.43 Server -q SQL_Latin1_General_CP1_CI_AS
2006-03-26 20:33:09.43 Server -T 4022
2006-03-26 20:33:09.43 Server -T 3659
2006-03-26 20:33:09.43 Server -T 3610
2006-03-26 20:33:09.43 Server -T 4010
2006-03-26 20:33:09.43 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2006-03-26 20:33:09.43 Server Detected 1 CPUs. This is an informational message; no user action is required.
2006-03-26 20:33:09.51 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2006-03-26 20:33:09.53 Server Database Mirroring Transport is disabled in the endpoint configuration.
2006-03-26 20:33:09.53 spid5s SQL Server started in single-user mode. This an informational message only. No user action is required.
2006-03-26 20:33:09.53 spid5s Starting up database 'master'.
2006-03-26 20:33:09.60 spid5s SQL Trace ID 1 was started by login "sa".
2006-03-26 20:33:09.64 spid5s Starting up database 'mssqlsystemresource'.
2006-03-26 20:33:09.78 spid7s Starting up database 'model'.
2006-03-26 20:33:09.84 spid5s Server name is 'XYZ-FNB5RZRU9ZP'. This is an informational message only. No user action is required.
2006-03-26 20:33:09.84 spid5s Starting up database 'msdb'.
2006-03-26 20:33:09.98 Server A self-generated certificate was successfully loaded for encryption.
2006-03-26 20:33:09.99 Server Server local connection provider is ready to accept connection on [ \.pipeSQLLocalMSSQLSERVER ].
2006-03-26 20:33:09.99 Server Dedicated administrator connection support was not started because it is not available on this edition of SQL Server. This is an informational message only. No user action is required.
2006-03-26 20:33:09.99 Server Error: 17826, Severity: 18, State: 3.
2006-03-26 20:33:09.99 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2006-03-26 20:33:09.99 Server Error: 17120, Severity: 16, State: 1.
2006-03-26 20:33:09.99 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I am very (almost two days) new to SQL Server Express (in fact SQL Server). In my old applications I am using VB.Net 2005 Express with MS Access database and now I wants to go for SQL Server Express.
One thing I am unable to find till now is : if SQLServer Express is installed on my Server machine (say ServerPC) with attached database (say MyDB.mdf), how I can access it through ADO.Net 2.0 from client machine. (using VB.Net Express)
Thanks and hope you will encourge me to use SQL Server .
Ok from what I understand, sqlserver 2005 is FREE, and it is not limited by the number of concurrent connections etc etc.
So this means you can put sqlserver 2005 express on a dedicated server, and it can pretty much handle all the load you can throw right? (except if your say running myspace hehe)
I would really like to be using SQLServer Express 2005 for some desktop database applications and replace MSDE. However, I am using VS.NET 2003 and so far I have not been able to discover if that combination will work.
I have followed the link to download SP1 of SQLServer 2005 Express Edition, but, on that page nowhere it is mentioned that downloads offered are of SP1, it simply says that SQLServer 2005 Express edition.
What is the correct link and am I really on the correct page of SP1 ?
When I try to run the install it detects some previous versions components. The remove all previous beta components fails and I have removed everything from the Add/Remove Programs.
In the last step of installing the SQL Server 2005 Express edition I get the following error:
Doing Action: Do_sqlScript PerfTime Start: Do_sqlScript : Thu Jun 21 19:38:35 2007 Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:38:35 2007 Service failed unexpectedly (1814) Error Code: 0x80070716 (1814) Windows Error Text: The specified resource name cannot be found in the image file. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls:ervice:tart Source Line Number: 301
Do_sqlScript SqlScriptHlpr Start service MSSQL$SQLEXPRESS
Error Code: 1814 MSI (s) (80!08) [19:39:58:265]: Product: Microsoft SQL Server 2005 Express Edition -- Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (1814) The specified resource name cannot be found in the image file. .
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (1814) The specified resource name cannot be found in the image file. . <Func Name='GetCAContext'> <EndFunc Name='GetCAContext' Return='T' GetLastError='203'> Doing Action: Do_sqlScript PerfTime Start: Do_sqlScript : Thu Jun 21 19:39:58 2007 Service MSSQL$SQLEXPRESS with parameters '-d"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamaster.mdf" -l"c:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLTemplate Datamastlog.ldf" -m SqlSetup -Q -qLatin1_General_CI_AS -T4022 -T3659 -T3610 -T4010' is being started at Thu Jun 21 19:39:58 2007 Service failed unexpectedly (1814) Error Code: 0x80070716 (1814) Windows Error Text: The specified resource name cannot be found in the image file. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls:ervice:tart Source Line Number: 301
Hi all, I'm having some trouble getting commands to be available. Certain commands are grayed out, and i'm assuming not working.
For example I copied this code from online:
SELECT h.USERID, c.KEY1, CASE srectype WHEN 'A' THEN 'Appointments' WHEN 'C' THEN 'Calls' ELSE 'Nothing' END AS ContactType, COUNT(h.USERID) AS Total_Contacts, COUNT(CASE WHEN resultcode BETWEEN 0 AND 4 THEN 1 ELSE NULL END) AS Contacts_Made, COUNT(CASE WHEN resultcode = 4 THEN 1 ELSE NULL END) AS Sales FROM CONTHIST h INNER JOIN CONTACT1 c ON h.ACCOUNTNO = c.ACCOUNTNO WHERE (h.USERID = @userident) AND (h.ONDATE BETWEEN @startdate AND @enddate) AND (h.SRECTYPE IN ('A', 'C')) GROUP BY h.USERID, c.KEY1, h.SRECTYPE ORDER BY h.USERID, c.KEY1, h.SRECTYPE
From that bit of code the following commands are gray: BETWEEN AND NULL INNER JOIN IN
I can only assume that i'm doing something fundamentally wrong. Is there a setting i'm missing in SQL Server Managment Studio EXpress to make these available? Do I need to 'import' anything?
I am building a Visual Web Developer site with a SQL Server 2005 Express backend. I am trying to create the login page, I have written a stored procedure that takes in the username and password and returns a value which indicates whether the user is valid or not. My problem now is integrating this stored procedure into the page. In Visual Studio 2003 you could just drag and drop the stored procedure from the Database Explorer window and it would create the neccessary SQLCommand which you can then pass parameters too and recieve return values, i.e:
sqlcommand1.Paramters[ "@username" ].value = TextUsername.Text; sqlcommand1.Paramters[ "@password" ].value = TextPassword.Text; sqlConnection1.Open(); sqlCommand1.ExecuteNonQuery(); Int Result = (int)sqlcommand.Parameters["@returnvalue"].value; sqlConnection1.Close();
I see in VWD there are SqlDataSource's etc, is this what I need to use to do what I'm looking for and how do they exactly work? Ideally what I'm looking for is when a user clicks login, the contents of the 'username' and 'password' text boxes are queried against the database. What controls and configuration is required to achieve this?
Iām working with an Sqlserver 2005 Express database on my local machine, and using vs.net 2005.I need to enable the sqlserver cache by the way: aspnet_regsql -E -d Northwind -ed I encountered the remote connection problem(error:40).The northwind database was restored to the sqlserver 2005 express by the db file downloaded,and I added the ASPNET user.I also enabled the TCP/IP by using SQL Server Configuration Manager. But all the web application connected to the Northwind database is working through the connection string: "Data Source=WKS-DEV-04SQLEXPRESS;Initial Catalog=Northwind;Integrated Security=True" Any help will be much appreciated, thank you very much for reading my post
Hello,I'm looking for a tutorial or some sample code to save a file in sql server with c#. So far I have not been able to find a anything I could use as most tutorials are in VB. I'm using the varbinary max type to store the file. The part I need help with is selecting the file and converting it using the Stream object, not the SQL insert statements. Thanks,Arnold
I have SQL 2005 developer eedition of SQL server and have a lot of problems because of that.A lot of features won't work, for example, if I choose App_data folder - add new item and select sqlDatabase I get the following error: Connections to SQL Server files (*.mdf) require SQL Server Express 2005 to function properly. Please verify the instalation of the component or downloadfrom the URL: http://go.microsoft.com/fwlink/?LinkId=49251
Hello, is it possible to have both sql server 2000 and sql server express 2005 installed at the same box?
I currently have sql2000 installed its used for an application. But I want to install visual studio 2005 and with this sql server express 2005 also is being installed ( if you want to) now I wonder if this is possible, that is is it possible to both run sql server 2000 and sql server express at the same time on the same box?
