I'm installing SQL 2005 on a cluster. Currently we do not need the features of enterprise edition, but we may need them in the future. Can you upgrade Standard edition to Enterprise edition (on a cluster)?
View 3 RepliesAs I found on http://msdn2.microsoft.com/en-us/library/ms143393.aspx its only possible on 32 Bit subsystems and not on native 64 bit - is this true?
In addition is it a complete installations which remains the current configuration? (i guess this because we have to apply all service packs again)?
and at least - is a license upgarde possible or do we have to buy a complete new licence?
Thanks HANNES
Hi All
I'm after some advice, I am looking for the best way to do this:
I have a SQL 2000 Clustered Virtual Instance which is of course Enterprise Edition as it is clustered. I need to upgrade to 2005, but dont need the 2005 Enterprise features, Standard will do, as this supports clustering.
The restrictions are that you cant upgrade 200Ent to 2005Std.
As this is a fairly complex environment, it has a default instance running on node 1 and a named instance running on node 2
I dont particularly want to uninstall both 2000 instances, and then install new 2005 instances
So is it possible to upgrade to 2005 ent, and then downgrade to standard. I have seen a suggestion without any details, that there is an undocumented sp, sp_update_resume, that might do this. Does anyone know about this
Or does anybody have any other suggestions. (the names of the instances have to be the same, as the existing instances)
Thanks in advance
Tom
Randy,
I did run upgrade advisior to check the existed sql 2005 standard edition to upgrade to enterprise editon. I got the following error message:
SQL Server version: 09.00.1399 is not supported by this release of Upgrade Advisor
Is it means the upgrade advisor can only work on from 7.0, 2000 to 2005? If I need check from standard to enterjprise in 2005, what kind of tool I can use?
Current set-up: three node cluster running Windows Server 2003 Enterprise Edition SP2 with two instances of SQL Server 2005 Standard Edition SP2.
Virtual node 1: Standard Edition, default instance, Database Engine only
Virtual node 2: Standard Edition, named instance, Database Engine, Analysis Services and Integration Services
Physical node A: Prefered node for virtual node 1
Physical node B: Failover node for both virtual node 1 and 2 (thus having two installations of Standard Edition)
Physical node C: Prefered node for virtual node 2
We started off with this set-up because there was no need for Enterprise features, and SQL 2005 supports failover clustering with two nodes in Standard Edition. Saved a bundle of cash, so everybody's happy. Now we need to run a solution on virtual node 2 that requires Enterprise features in Analysis and Integration Services, so an edition upgrade is required on virtual node 2. I have done some research and found several edition upgrade examples, but none that match the above scenario. We are running production on these machines, so I can't risk experimenting with command line options, I have to be right the first time.
Is it possible to mix two editions of SQL Server 2005 in one cluster? Can I upgrade virtual node 2 to Enterprise but leave virtual node 1 at Standard? What procedure do I have to follow to upgrade all three components of virtual node 2 to Enterprise Edition on both physical node B and C?
Any ideas will be greatly appreciated.
Hi
we have installed SQL 2005 Standard and we are planning to upgrade to SQL 2005 Enterprise version. Do i need to uninstall SQL 2005 Standard and reinstall Enterprise or i can install SQL 2005 Enterprise on top of standard version to upgrade.
Thanks a lot in advance
Can SQL 2005 32bit Standard edition be upgraded to SQL 2005 32bit Enterprise Edition in-place?
View 4 Replies View RelatedCan SQL 2005 32bit Standard edition be upgraded to SQL 2005 32bit Enterprise Edition in-place.
View 12 Replies View RelatedHi,
right now I'm using SQL2000 Std Edition. Our new application requires an OLAP Svcs to be installed. As I found in SQLBooksOnline HTTP access to OLAP cubes is available only in OLAPSvsc Enterprise Edition. Do I have to upgrade SQL Std Edition as well or it is possible to run OLAP Enterprise on top of SQL2000 Standard? Does anyone of you know about step-by-step guide how to move SQL2K Std to SQL Ent?
Thanks in advance for help
Regards
Karel
The upgrade works fine if the instance starts on SP2. But the instance has the hotpatch applied and is running build 3200. When I try the upgrade against the 3200 version it errors out with the following message:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
SQL Server Setup has encountered the following problem: [Microsoft][SQL Native Client][SQL Server]The certificate cannot be dropped because one or more entities are either signed or encrypted using it.. To continue, correct the problem, and then run SQL Server Setup again.
My question is:
if I upgrade from standard to enterprise on Version: 9.00.3042 it upgrade perfectly well but if I try to upgrade from Version: 9.00.3200 version, it gives the error message.
let me know if anyone can solve the issue at cqldba@gmail.com
First of all I am planning to install sql 2005 standard and sql standard sp2
on vista ultimate professional using vs 2008 pro
I have some questions about installing sql 2005 what is the best way to install sql 2005 on
vista My article I got this from ms 403393 (upgrading sql standard 2005 to sql standard 2005sp2)
1 sql standard .(shortcut right click from cd/dvd not possible) I have heard command prompt start menu, click cmd
type run D: cd/dvd exe
From a wizard (sql sp2)
2. sql standard sp2
a. upgrade using a wizard
b. open a command prompt (not sure if right click is best option)
install dvd media example dqlserver2005sp2-kb921896-exe SKUUPGRADE=1(is run as administrator option on media)
do I type run or what do I type ?
c. go to system configuration page(where is this) you should see a single warnining you need to install
sp2, the edition should say success if it does not please reapply
d. on the registration page please enter your registeration number
e. on the comments to install please enter database services, reporting services
workstation components, books online and development tools( I wish to install
all components)
f. on the instance page click default instance(default install)
g. finish rest of wizard
h. apply sql sp2
I also have of seperate question of upgrading sql from vista using a Configuring local admin account
account (configuring administration from a wizard-will this notify
me by default) I do not want my administrative priviledges elevated.
I will be using default configurations for my installations.........
I often wish there would a nice picture examples of doing this
Please help
Can some one here give me more insight about how to upgrade a SQL Server 2005 Standard Version (32 bits) to a SQL Server 2005 Enterprise Version (32 bits) as default instance on a Windows 2003 enterprise OS (32 bits). I want to know what is the easist way and what is the safest way. May I preserve some settings I have for the STD version, or I have to start from strach again to configure the server? Is there any catches, anything I should have attention to (We are using heavily about CLR and fulltext indexing)?
Thanks a milliom
Ning
I am running SQL 2005 Enterprise Edition on a 2 node cluster. Can I install SQL 2005 Standard edition on the same cluster?
I am trying to upgrade SQL Server Express 2005 Report Server to SQL 2005 Standard and it fails with the following error:
SQL Server Setup did not have the administrator permissions required to copy a file: C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting ServicesReportServer
ssrvpolicy.config. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
After I click OK on the message, this whole path where the upgrade is bieng installed dissapears C:Program FilesMicrosoft SQL ServerMSSQL.8Reporting Services. The error is a bit missleading because the file that it is trying to copy rssrvpolicy.config does appear in that upgrade folder so I am not sure why it would try to copy a file that has already been copied.
I was able to upgrade the Database Engine instance fine but can't upgrade Reporting Services due to that error. I have verified that the account that ran the setup had the administrator permissions. Your prompt reply to my question would be greatly appreciatted.
Hi Folks,
A simple question, but I can't seem to find the answer anywhere on line:
Can you use SQL 2005 Standard edition to replicate a SQL 2005 Enterprise Edition?
Many thanks in advance,
Ron Fowler
Hi,Is there an Upgrade path from SQl server 2000 Standard edition toEnterprise edition? DO we just have to uninstall and do a reinstall?Any help is appreciated.ThanksGG
View 1 Replies View RelatedI have a SQL Server 2005 Enterprise Edition running in a cluster environment. There is the request to Upgrade to Standard Edition. (Yes, the other way round)
How can I excute an Up-/Downgrade and avoid new installation ?
Thanks for help
Peter
Hi,
What is the best way to upgrade a SQL SERVER 2005 EXPRESS to the STANDARD version?
We want to licence a trail version 2005 Enterprise with an full version of MS Sql server 2005 standard. Is this possible?
View 1 Replies View RelatedSimple question. I have a client that needs SQL 2005 Standard installed NOW, and cannot wait for media to arrive. I know I can download the 180 trial of SQL 2005 Enterprise, but can it be licensed as Standard when we purchase?
View 6 Replies View RelatedI installed SQL 2005 Standard edition on a failover cluster (Windows 2003). It is in production. Vendor wanted Enterprise Edition. What are my options to migrate to Enterprise? Is there an in-place way to do this, or is it a big deal?
Vendor probably doesn't need Enterprise. It's a low volume OLTP application with small databases. No fancy stuff (other than the failover clustering). Vendor simply did not test his application on Standard so he says we need Enterprise. Nevertheless, Management will probably want me to make the change.
Hi All !!
I have a Server on Development with SQL 2000 + Report Server 2000 and SQL 2005 Standard with Report Server 2005. All is working properly.
Now, my boss realized that it is important to use SQL 2005 Enterprise Edition instead of SQL 2005 Standard Edition. This is the first time I do this and I don't know where to start or which are the items that I should consider when installing SQL 2005 Enterprise Edition.
Should I uninstall SQL 2005 Standard?
After installing Enterprise, Report Server will work as usual?
Are there any items to have in mind?
Many Thanks!!
NetGrey.
I've been reading and looking over what to do for my situation for several days. I need to ask and see if I can get a clear answer.
My Scenario:
I have a SQL Server 2005 Eval installed that is currently running with live data. I need to upgrade that to a recently-purchased full version. I have several databases set up. I have ready the article 914158 that states it will fail. It's still running so I can access everything. If I restart or stop the service I'm screwed.
That do I do?
Thanks so much!
Can we upgrade from Express 2005 to Standard/Workgroup 2005??If possible with what complexities can it be done??
View 1 Replies View RelatedHow can I upgrade Sql Express SP1 to SQL Server 2005 Standard ?
Hi Guys,
Having some problems Upgrading from SQL Express 2005 SP2 to SQL 2005 Standard. I'm getting the following:
Name: Microsoft SQL Server 2005 Express Edition
Reason: Your upgrade is blocked. For more information about upgrade support, see the "Version and Edition Upgrades" and "Hardware and Software Requirements" topics in SQL Server 2005 Setup Help or SQL Server 2005 Books Online.
Build version check:
Your upgrade is blocked because the existing component is a later version than the version you are trying to upgrade to. To modify an existing SQL Server component, go to Add or Remove Programs in Control Panel, select the component you would like to modify, and then click Change/Remove.
Pretty sure that I have to have SQL 2005 Std w/SP2 but I don't have a CD with it on. Is there a way that I can create one so that I can upgrade the SQL Instance In-Place.
Thanks in advance
Michael
Hi,
I am hiring a server at a hosting company. This server contains a dozen websites that i made and they all have their own database.
Well, i received a message from my hosting company that they go to remove the SQL 2000 Standard and replace it by SQL 2005 Express.
What do I have to think about that? Can this give database connection problems?
Thanks for your answers.
Hey,
I tried the skuupgrade=1 and it appeared to want to install a whole new instance. This operation was supposed to recognise what to upgrade and what instance to do (there is only one). Can some send me some detailed instructions on how to upgrade my sql 2005 developer edition to the enterprise edition?
thanks
Terry
Hi,
Has anyone tried an in-place upgrade from SQL Server 2005 Developer to Standard Edition?
It apears to be a valid upgrade path according to this:
http://msdn2.microsoft.com/en-us/library/ms143393.aspx
Is it just a case of changing the registered licensing info? (I presume all the functionality for Standard exists in the Developer Edition) Or is it a reinstall job?
I want to use a dev license for development on the server, then once its finished, just leave it in place on the box and upgrade the licensing to standard edition. (The client doesn't yet have a Standard License, but does have a Dev License - and wants me to start right away!)
If its going to boil down to having to do a full re-installation then I should get a Standard license from the start, if its just a minor license key change, then I can use a Dev license straight away!
Pls. help. Thank you!
I tried to upgrade an Express edition 2005 to Standard Edition 2005. I did remember to use the command prompt setup parameter to allow the upgrade but still the option to upgrade is disabled. Can upgrade from express to standard?
Just bought the SQL server 2005 standard edition software to replace the express edition that I have been running for the last 6 months.
The setup works fine until I ask it to install the management studio.
At this stage it seems to think that I have a newer version already installed and tells me that it won't upgrade it.
I then wend through the add/remove sotware function in control panel and removed everything to do with SQL server and tried again. The same thing happened.
Any ideas what I should try next ??
James
Is it possible to upgrade from MSDE to SQL Server 2005 Standard Edition?
View 1 Replies View Relatedif i upgrade from sql server 2005 expressto sql server 2005 enterprise can i do it ?
am i need to uninstall 2005 express before ?