WMI Configuration Error
Jul 7, 2006
Hi,
I tried installing the SQL Server 2005 evaluatio nedition as well as the free Express edition downloadable from the SQL Server 2005 site, and in both cases I got the following error msg:
TITLE: Microsoft SQL Server 2005 Setup
------------------------------
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine MYPC Error:2147749891 (0x80041003).
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=setup.rll&EvtID=70342
------------------------------
BUTTONS:
OK
------------------------------
I cannot figure it out. Some posts suggested using a particular batch file. I did, but it didn't make a difference. Any ideas on what I can do?
Thanks!
Ste
View 4 Replies
ADVERTISEMENT
Oct 5, 2004
Hi. I'm debugging our application, and I need to see the Sql Server 2000 error log files. The problem is that the Sql Server Engine does not log every error that occurs.
For example, when I run a query "Select * from kkk", it gives an error saying "Invalid object name 'kkk'", but the error is only returned to the client. Its not logged in the error log files. I think, that this happens because that error has a low level (16), and the log is only for high-level errors.
Is there a way to configure which errors are logged in the error log, or to make all errors get logged??
Thanks!
View 2 Replies
View Related
Jul 19, 2007
I installed the SQL Server Management Studio Express successfully. However when I tried to run the Configuration Tools -> SQL Server Configuration Manager", I have an error that asked me to send report to Microsoft (I am sure it's familiar to all) with this message "sqlwtsn.exe" error. I tried on 2 machines but same results. Went thru few times uninstall and install but to no avail.
Also, I have installed the dotnetfx and msxml6 but still unable to get it work. I am running XP SP2, one Pentium and AMD machine. 512 MB. Please HELP!!! Any other alternative? I am running some project for my school assignments urgently. Thanks in advance for the advice.
View 2 Replies
View Related
Mar 18, 2008
When i open up configuration area i click Surface Area Configuration for Features, a few seconds later i get the message:
Code Snippet
TITLE: Surface Area Configuration
------------------------------
Failed to connect to server localhostMICROSOFT##SSEE. (Microsoft.SqlServer.ConnectionInfo)
------------------------------
ADDITIONAL INFORMATION:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
Since i was trying to set this up for development purposes i opened the Local TCP ports and configured the firewall to allow SQL traffic through. I went to my application and it successfully connected to the database. So it leaves me wondering if this error i have would make any difference later - can anyone advise how to resolve?
So far i have allowed local remote connections via TCP, ive adjusted the firewall accordingly (which allows other computers to connect to the server and retrieve database information). Im running Windows Server 2008 with SQL 2005 64 bit edition.
Thanks
View 4 Replies
View Related
Nov 30, 2006
Hi, does somebody recognize the problem with my code? -Thanks!
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: This is an unexpected token. The expected token is 'NAME'. Line 58, position 52.Source Error:
<sessionState mode="SQLServer"stateConnectionString="Jensen"sqlConnectionString=
"datasource=Database;userid=username;password=pass"cookieless="false"timeout="60"/>
View 1 Replies
View Related
May 10, 2006
I'm recieving the following error:
The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine 'machine information' Error: 2147749896 (0x80041008).
I've researched the error and found out some people were running batch scripts to reinstall wmi, but none of them worked for me. One of them I gave up on after thirty minutes and it wasn't doing anything.
Please give some suggestions on how I can resolve this issue.
View 13 Replies
View Related
Jul 2, 2007
I have a package that executes succesfully before package is configured.
but when package is configured to use configuration details either from SQL Server configuration table or XML configuration file, gives an error :
[Connection manager "XYZ"] Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Can anyone help me out with this ?
Experts !!! this is my second post, my previous post is still unanswered.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1793362&SiteID=1
View 7 Replies
View Related
Oct 16, 2007
I have a package that executes succesfully before package is configured.
but when package is configured to use configuration details either from SQL Server configuration table or XML configuration file, gives an error :
Error: An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
I am using Hit Software OLEDB provider for DB2/400 Connection
Can anyone help me out with this ?
View 10 Replies
View Related
Feb 7, 2006
Hey Everyone,
I am trying to setup publishing on SQL Server 2000 Enterprise. I will be subscribing from a SQL Mobile 2005 database so I have installed the SQL Server 2000 SP3a Replication Components, .NET Framework 2.0, and the SQL Server 2005 Mobile Edition Server Tools.
I was able to go through the 2005 Mobile Web Synchronization Wizard with no problems. However, when I try to run the Configure Publishing and Distribution Wizard, I get the following message at the end:
SQL Server Enterprise Manager could not configure 'GISSERV' as the Distributor for 'GISSERV'
Error 14114: '(null)' is not configured as a Distributor.
The first option I choose is Make 'GISSERV' it's own Distributor. Then, I select the snapshot folder that I shared. And on the third screen, I've tried going with the standard default settings and customizing those settings.
Has anyone else come across this error? Is there anyone else out there replicating from SQL Server 2000 to SQL Server 2005 Mobile?
Thanks in advance,
Lee
View 5 Replies
View Related
Apr 4, 2007
Not sure if you guys have run across this error. I created a simple SSIS package to import from a csv file into SQL Server, and I made it configurable so I can point to any of my 4 destination SQL Servers.
In the error list pane, i'm getting this warning:
Warning loading Package.dtsx: Table "[dbo].[SSIS Configurations]" does not have any records for configuration. This occurs when configuring from a SQL Server table that has no records for the configuration.
The funny thing is, the table is populated with 2 properties, Catalog & ServerName, but at run time, its like the Package ignores the SQL table to apply configuration properties.
Any help would be greatly appreciated.
-- J
View 3 Replies
View Related
Aug 15, 2006
I am having trouble installing and start SQl server on my machine. Currently, I am running Windows XP on my computer with service Pack 2. Not sure why but every time I try to execute the configuration instance , the start services portion does not execute and I get an error 0 message. Please help!!
View 4 Replies
View Related
Feb 4, 2008
Hello Again
I have sql server 2005 installed in my pc. I have to make a DTS package. I did it and it works fine. I have to create a configuration package.
I made it but when i try to debug it, the package show an error in the connection to the database. Checking the xml file all is correct. I tried to change all parameters but it's the same.
Any one knows why it happens?
Thanx
View 4 Replies
View Related
Jan 31, 2007
Hi,I always use the following sql statement to check whether an email address exists in a database. With my latest project I tried to do this within the TableAdapter Configuration Wizard and it gave me an error: IF NOT EXISTS (SELECT Email FROM tblEmailList WHERE Email=@Email) BEGIN INSERT INTO tblEmailList (Email, DateRegistered) VALUES (@Email, @DateReg) SELECT 1 AS RESULT END ELSE BEGIN SELECT 0 AS RESULT END first it gave an error saying I must declare the variables @Email and @DateReg then when I removed the part of insert and just wanted to check the email address existence it gave me this error:The Compound statement SQL construct or statement is not supportedAny idea anyone?
View 5 Replies
View Related
Jan 11, 2000
Guys, could anyone please help me to resolve this problem:
I'm trying to install MSSQL Server 7 Desktop Edition on Windows 98 (First Edition v4.10.1998).
Everything goes smoothly until the 'Starting Service ...' icon appears. Then I'm getting a setup
error which says that it failed to configure server and refers me to 'cnfgsr.out' file:
-------------------------------------
Starting Service ...
An error occurred while attempting to start the service (1460)
SQL Server configuration failed.
-------------------------------------
The ERRORLOG file contains the following:
-------------------------------------
2000-01-11 18:42:40.40 kernel Microsoft SQL Server 7.00 - 7.00.623 (Intel X86)
Nov 27 1998 22:20:07
Copyright (c) 1988-1998 Microsoft Corporation
Desktop Edition on Windows 4.10 (Build 1998: )
2000-01-11 18:42:40.48 kernel Copyright (C) 1988-1997 Microsoft Corporation.
2000-01-11 18:42:40.49 kernel All rights reserved.
2000-01-11 18:42:40.52 kernel Logging SQL Server messages in file 'C:MSSQL7logERRORLOG'.
2000-01-11 18:42:40.86 kernel initconfig: Number of user connections limited to 32767.
2000-01-11 18:42:40.87 kernel SQL Server is starting at priority class 'normal'(1 CPU detected).
2000-01-11 18:42:41.02 kernel User Mode Scheduler configured for thread processing
2000-01-11 18:42:43.15 server Directory Size: 2559
2000-01-11 18:42:43.43 spid0 Using 'sqlimage.dll' version '4.0.5'
Stack Dump being sent to C:MSSQL7logSQL00001.dmp
Stack Dump being sent to C:MSSQL7logSQL00002.dmp
2000-01-11 18:42:48.84 spid0 Problem creating symptom dump file due to internal exceptionUnable to get thread context - no pss
2000-01-11 18:42:48.86 spid0 Problem creating stack dump file due to internal exception
---------------------------------------------------
Any help would be appreciated.
Thank you very much.
View 2 Replies
View Related
Apr 11, 2008
Hi. I've created a number of packages in SSIS which just make temp tables out of views. I did them with the "Optimize for many tables" and "Run in transaction" boxes checked.
Now I'm trying to port them over to another database on another server. I'm first going through the Package Configuration Wizard. When I try to finish the wizard I get a error with the following message:
quote:===================================
Could not complete wizard actions. (Microsoft Visual Studio)
===================================
Could not generate the configuration file. (Microsoft.DataTransformationServices.Wizards)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Wizards.ConfigurationWizardPages.ConfigurationWizardSR&EvtID=CouldNotGenerateConfigurationFile&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.OnFinish(CancelEventArgs e)
===================================
Failure exporting configuration file.
(ENRLMNT_UniqueRecords_temp)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.ExportConfigurationFile(String str)
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
I don't know how to resolve it. Anyone?
One way to deal with this particular issue would be just to recreate the SSIS package on the other server. The issue with this is I want to be positive which view I'm making a copy of and I'm not currently. Since the Import/Export has the transaction setting checked, I can't seem to determine what the source was. Help?
View 2 Replies
View Related
May 7, 2008
Hi,
I have a child package running under main parent pakage.
I am passing value of integer & string type variables from parent package to child package's variables ( as disscussed in following artical http://msdn.microsoft.com/en-us/library/ms345179(SQL.100).aspx) ,values assigned in child package variables are futher used to build connection string for flat file connection manager in child package.
I have been using this whole SSIS package sucessfully for last three months,but suddenly the following error arises
"OnError,,,,,,,The result of the expression
Code Snippet
"@[User::StrTextFileImpDirectory] +"SomeTextStringHere"+ @[User::StrANTTextFileName] +(DT_STR,30,1252) @[User::Staging_Date_Key]+ "SomeTextStringHere"
on property "ConnectionString" cannot be written to the property. The expression was evaluated, but cannot be set on the property."
When I see the result of above mentioned expression through Log file than it appears that my string variable
Code Snippet"@[User::StrTextFileImpDirectory]
in child package has not been populated with any value from parent package variable, I.e it has been populated with empty string(While this is not desired value).
Same problem arises with my integer type variable
Code Snippet@[User::Staging_Date_Key]
,it has ben populated with value zero (i.e default value at design time for integer type),while this is not desired value.
Can some one guide me how to figure out the cause for error....
Is it possible that such kind of error may arise due to any change in enviornment of server....
View 1 Replies
View Related
Aug 9, 2006
I am attempting to create an XML Configuration file and I am recieving the following error once I click finish in the wizard:
Could not complete wizard actions.
Additional Information:
Could not generate the configuration file. (Microsoft.Data.TransformationServices.Wizard)
Technical Details:
===================================
Could not complete wizard actions. (Microsoft Visual Studio)
===================================
Could not generate the configuration file. (Microsoft.DataTransformationServices.Wizards)
------------------------------
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Wizards.ConfigurationWizardPages.ConfigurationWizardSR&EvtID=CouldNotGenerateConfigurationFile&LinkId=20476
------------------------------
Program Location:
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.OnFinish(CancelEventArgs e)
===================================
Failure exporting configuration file.
(eFreedomAS)
------------------------------
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Package.ExportConfigurationFile(String str)
at Microsoft.DataTransformationServices.Wizards.ConfigurationWizardForm.GenerateXmlConfigurationFile(DesignTimeConfiguration designTimeConfiguration)
Name:
eFreedomAS2
Type:
Configuration File
New configuration file will be created.
File name:
C:abc.xml
Properties:
Package.Variables[User::SourcePath].Properties[Value]
Package.Variables[User::SourcePath].Properties[Name]
Package.Variables[User::Packages].Properties[Value]
Package.Variables[User::Packages].Properties[Name]
Package.Variables[User::PackageDefNumber].Properties[Value]
Package.Variables[User::PackageDefNumber].Properties[Name]
Package.Variables[User::Directory].Properties[Value]
Package.Variables[User::Directory].Properties[Name]
Package.Variables[User::DestinationPath].Properties[Value]
Package.Variables[User::DestinationPath].Properties[Name]
Package.Connections[ViewHelpTopicDef].Properties[Name]
Package.Connections[ViewHelpTopicDef].Properties[ConnectionString]
Package.Connections[ViewDef].Properties[Name]
Package.Connections[ViewDef].Properties[ConnectionString]
Package.Connections[ValidationTestDef].Properties[Name]
Package.Connections[ValidationTestDef].Properties[ConnectionString]
Package.Connections[ValidationRulePackageDef].Properties[Name]
Package.Connections[ValidationRulePackageDef].Properties[ConnectionString]
Package.Connections[ValidationRuleFileDef].Properties[Name]
Package.Connections[ValidationRuleFileDef].Properties[ConnectionString]
Package.Connections[ValidationRuleDef].Properties[Name]
Package.Connections[ValidationRuleDef].Properties[ConnectionString]
Package.Connections[ValidationMessageFileDef].Properties[Name]
Package.Connections[ValidationMessageFileDef].Properties[ConnectionString]
Package.Connections[ValidationMessageDef].Properties[Name]
Package.Connections[ValidationMessageDef].Properties[ConnectionString]
Package.Connections[ValidationIdentifierDependency].Properties[Name]
Package.Connections[ValidationIdentifierDependency].Properties[ConnectionString]
Package.Connections[ValidationCalcGraphEdge].Properties[Name]
Package.Connections[ValidationCalcGraphEdge].Properties[ConnectionString]
Package.Connections[UserGroupFeatureDef].Properties[Name]
Package.Connections[UserGroupFeatureDef].Properties[ConnectionString]
Package.Connections[UserGroupFeature].Properties[Name]
Package.Connections[UserGroupFeature].Properties[ConnectionString]
Package.Connections[UserGroupDef].Properties[Name]
Package.Connections[UserGroupDef].Properties[ConnectionString]
Package.Connections[UserGroup].Properties[Name]
Package.Connections[UserGroup].Properties[ConnectionString]
Package.Connections[TableDef].Properties[Name]
Package.Connections[TableDef].Properties[ConnectionString]
Package.Connections[Source].Properties[UserName]
Package.Connections[Source].Properties[ServerName]
Package.Connections[Source].Properties[Password]
Package.Connections[Source].Properties[Name]
Package.Connections[Source].Properties[InitialCatalog]
Package.Connections[Source].Properties[ConnectionString]
Package.Connections[SelectListItemDef].Properties[Name]
Package.Connections[SelectListItemDef].Properties[ConnectionString]
Package.Connections[SelectListDef].Properties[Name]
Package.Connections[SelectListDef].Properties[ConnectionString]
Package.Connections[ScriptAssemblyDef].Properties[Name]
Package.Connections[ScriptAssemblyDef].Properties[ConnectionString]
Package.Connections[PrintedPageFormulaScriptDef].Properties[Name]
Package.Connections[PrintedPageFormulaScriptDef].Properties[ConnectionString]
Package.Connections[PageDef].Properties[Name]
Package.Connections[PageDef].Properties[ConnectionString]
Package.Connections[PageCalcPathSubPath].Properties[Name]
Package.Connections[PageCalcPathSubPath].Properties[ConnectionString]
Package.Connections[PageCalcPath].Properties[Name]
Package.Connections[PageCalcPath].Properties[ConnectionString]
Package.Connections[PackageLinkDef].Properties[Name]
Package.Connections[PackageLinkDef].Properties[ConnectionString]
Package.Connections[PackageImportTypeDef].Properties[Name]
Package.Connections[PackageImportTypeDef].Properties[ConnectionString]
Package.Connections[PackageIdentifierGroupDef].Properties[Name]
Package.Connections[PackageIdentifierGroupDef].Properties[ConnectionString]
Package.Connections[PackageIdentifierDef].Properties[Name]
Package.Connections[PackageIdentifierDef].Properties[ConnectionString]
Package.Connections[PackageExportTypeDef].Properties[Name]
Package.Connections[PackageExportTypeDef].Properties[ConnectionString]
Package.Connections[PackageDef].Properties[Name]
Package.Connections[PackageDef].Properties[ConnectionString]
Package.Connections[PackageDataItemTextDef].Properties[Name]
Package.Connections[PackageDataItemTextDef].Properties[ConnectionString]
Package.Connections[OnlinePagePrintedPageDef].Properties[Name]
Package.Connections[OnlinePagePrintedPageDef].Properties[ConnectionString]
Package.Connections[OnlinePageDefDependency].Properties[Name]
Package.Connections[OnlinePageDefDependency].Properties[ConnectionString]
Package.Connections[OnlinePageDef].Properties[Name]
Package.Connections[OnlinePageDef].Properties[ConnectionString]
Package.Connections[MaterialityToleranceDef].Properties[Name]
Package.Connections[MaterialityToleranceDef].Properties[ConnectionString]
Package.Connections[LineDef].Properties[Name]
Package.Connections[LineDef].Properties[ConnectionString]
Package.Connections[ImportTypeDef].Properties[Name]
Package.Connections[ImportTypeDef].Properties[ConnectionString]
Package.Connections[ImportDef].Properties[Name]
Package.Connections[ImportDef].Properties[ConnectionString]
Package.Connections[IdentifierStateDef].Properties[Name]
Package.Connections[IdentifierStateDef].Properties[ConnectionString]
Package.Connections[IdentifierRelatedDef].Properties[Name]
Package.Connections[IdentifierRelatedDef].Properties[ConnectionString]
Package.Connections[IdentifierPrintReferenceDef].Properties[Name]
Package.Connections[IdentifierPrintReferenceDef].Properties[ConnectionString]
Package.Connections[IdentifierGroupUserGroupFeatureDef].Properties[Name]
Package.Connections[IdentifierGroupUserGroupFeatureDef].Properties[ConnectionString]
Package.Connections[IdentifierGroupUserGroupFeature].Properties[Name]
Package.Connections[IdentifierGroupUserGroupFeature].Properties[ConnectionString]
Package.Connections[IdentifierGroupIdentifierDef].Properties[Name]
Package.Connections[IdentifierGroupIdentifierDef].Properties[ConnectionString]
Package.Connections[IdentifierGroupIdentifier].Properties[Name]
Package.Connections[IdentifierGroupIdentifier].Properties[ConnectionString]
Package.Connections[IdentifierGroupDef].Properties[Name]
Package.Connections[IdentifierGroupDef].Properties[ConnectionString]
Package.Connections[IdentifierGroup].Properties[Name]
Package.Connections[IdentifierGroup].Properties[ConnectionString]
Package.Connections[IdentifierDef].Properties[Name]
Package.Connections[IdentifierDef].Properties[ConnectionString]
Package.Connections[IdentifierDataItemTextDef].Properties[Name]
Package.Connections[IdentifierDataItemTextDef].Properties[ConnectionString]
Package.Connections[FormulaScriptDef].Properties[Name]
Package.Connections[FormulaScriptDef].Properties[ConnectionString]
Package.Connections[FormulaDef].Properties[Name]
Package.Connections[FormulaDef].Properties[ConnectionString]
Package.Connections[FeatureGroupFeatureDef].Properties[Name]
Package.Connections[FeatureGroupFeatureDef].Properties[ConnectionString]
Package.Connections[FeatureGroupDef].Properties[Name]
Package.Connections[FeatureGroupDef].Properties[ConnectionString]
Package.Connections[FeatureDef].Properties[Name]
Package.Connections[FeatureDef].Properties[ConnectionString]
Package.Connections[ExportTypeRelatedDef].Properties[Name]
Package.Connections[ExportTypeRelatedDef].Properties[ConnectionString]
Package.Connections[ExportTypeFormulaScriptDef].Properties[Name]
Package.Connections[ExportTypeFormulaScriptDef].Properties[ConnectionString]
Package.Connections[ExportTypeExportDef].Properties[Name]
Package.Connections[ExportTypeExportDef].Properties[ConnectionString]
Package.Connections[ExportTypeDef].Properties[Name]
Package.Connections[ExportTypeDef].Properties[ConnectionString]
Package.Connections[ExportTypeBlobTypeDef].Properties[Name]
Package.Connections[ExportTypeBlobTypeDef].Properties[ConnectionString]
Package.Connections[ExportFormulaScriptDef].Properties[Name]
Package.Connections[ExportFormulaScriptDef].Properties[ConnectionString]
Package.Connections[ExportDef].Properties[Name]
Package.Connections[ExportDef].Properties[ConnectionString]
Package.Connections[ColumnHeaderDef].Properties[Name]
Package.Connections[ColumnHeaderDef].Properties[ConnectionString]
Package.Connections[ColumnDef].Properties[Name]
Package.Connections[ColumnDef].Properties[ConnectionString]
Package.Connections[CellTypeFileTypeDef].Properties[Name]
Package.Connections[CellTypeFileTypeDef].Properties[ConnectionString]
Package.Connections[CellTypeDef].Properties[Name]
Package.Connections[CellTypeDef].Properties[ConnectionString]
Package.Connections[CellRangeDef].Properties[Name]
Package.Connections[CellRangeDef].Properties[ConnectionString]
Package.Connections[CellRangeCellDef].Properties[Name]
Package.Connections[CellRangeCellDef].Properties[ConnectionString]
Package.Connections[CellOverrideDef].Properties[Name]
Package.Connections[CellOverrideDef].Properties[ConnectionString]
Package.Connections[CellDef].Properties[Name]
Package.Connections[CellDef].Properties[ConnectionString]
Package.Connections[CategoryDef].Properties[Name]
Package.Connections[CategoryDef].Properties[ConnectionString]
Package.Connections[CalcPathSubPath].Properties[Name]
Package.Connections[CalcPathSubPath].Properties[ConnectionString]
Package.Connections[CalcPath].Properties[Name]
Package.Connections[CalcPath].Properties[ConnectionString]
Package.Connections[CalcGraphEdge].Properties[Name]
Package.Connections[CalcGraphEdge].Properties[ConnectionString]
Package.Connections[AreaDef].Properties[Name]
Package.Connections[AreaDef].Properties[ConnectionString]
View 4 Replies
View Related
Mar 3, 2006
We have a project that is in a server with windows 2000 (SQL Server 2005 and .Net 2005) And the other developer has a windows XP machine ( .Net 2005) , We are using the VSSC for the project , when the other developer run the application , the following error is show :
Server Error in '/XXX' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load type 'XXXSecurity.RoleSql'.
Source Error:
Line 27: <roleManager enabled="true" defaultProvider="SqlRoleManager" cacheRolesInCookie="true" cookieTimeout="30" cookieRequireSSL="false" createPersistentCookie="true">
Line 28: <providers>
Line 29: <add name="SqlRoleManager" type="XXXSecurity.RoleSql" connectionStringName="MySqlConnection" applicationName="XXX"/>
Line 30: </providers>
Line 31: </roleManager>
Source File: C:Documents and SettingsYYYYMy DocumentsVisual Studio 2005ProjectsXXXRRRRKKKKKweb.config Line: 29
Where XXX is the name of application.
SomeOne Know How Help Me Please???
View 3 Replies
View Related
Jun 28, 2006
I'm getting an error when the SQL install program checks the system - "The SQL Server System Configuration Checker cannot be executed due to WMI configuration on the machine DI-ERP2 Error:2148007941 (0x80080005).
I've tried a bunch of stuff as suggested by some of the other threads, but nothing is working so far...
Any ideas would be greatly appreciated.
View 7 Replies
View Related
Jan 3, 2007
Hello,
I am a complete Newbie with SQL Server 2005. Can someone help with this problem or at least point me in the right directio for diagnosing it correctly.
I'm learning the Standard SQL product on Windows XP Pro, and everything on my computer has the latest updates (from Windows Updates). I had previously installed SQL Express, but removed all products associated with that according to steps listed at Microsoft's site (pre-installation steps for SQL Server 2005 Standard, as they relate to the removal of SQLExpress).
My problem is I can't run "Reporting Services Configuration". When I try to run it, the main window opens with "Report Server Installation Instance Selection" window, and immediately I get an error box that says, "An unknown error has occurred in the WMI Provider. Error Code 80040219". When I click Ok, I'm back at the instance selection window, where my computer name is by default the machine name, but the instance name is greyed out. After the error, Event Viewer/Application gives the info below. I noticed that it refers to MSSQL.2Reporting Services - but that was the directory for SQL Express Reporting Services, according to the mapping in my registry. It shows mssql.4 as the Standard SQL Reporting Services directory
Event Type: Error
Event Source: Report Server
Event Category: (5)
Event ID: 133
Date: 1/3/2007
Time: 11:08:23 AM
User: N/A
Computer: BSDELL
Description:
The description for Event ID ( 133 ) in Source ( Report Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: c:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServerRSReportServer.config.
When I try to connect to Report Services through SQL Server Management Studio, I get the following error: Cannot connect to BsDell - with the following technical details...
Program Location:
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.ParseServerName(String serverName)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.CreateSqlOlapConnectionInfoBase(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.RSClient.RSConnectionInfo.RSTypeImpl.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.RSType.GetConnectionObject(UIConnectionInfo ci)
at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ObjectExplorer.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
View 7 Replies
View Related
Sep 5, 2007
when i open services in the computer management console i get the error message
sql server configuration manager .... error... snap in...restart mmc
View 2 Replies
View Related
Sep 29, 2005
I get the following error in the when I run setup of the sept CTP.
View 8 Replies
View Related
Apr 20, 2007
In SQL Rep Serv Config Manager under Web Service Identity, the ASp.NET Service account is disabled and if I enter the Report Server application pool into Report Server and Report Manager it brings back:
Setting Web Service Identity
There was an error setting the identity for the web service. The previosly set identity will still be used.
ReportServicesConfigUI.WMIProvider.WMIProviderException: An unknown error has occurred in the WMI Provider. Error Code 80070005
at ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.SetWebServiceIdentity(String applicationPool)
Any help would be greatly appreciated.
Thanks,
Anoop
View 2 Replies
View Related
Apr 26, 2006
While trying to "Set Configuration Database Server" for Windows SharePoint Services I receive the error:
"Cannot open database "SharePoint" requested by the login.
The login failed. (Error code: 4060)"
I set up a test bed server 'SNET' with WinServer03 SP1, IIS 6. SQL Server Express, and SharePoint Services.
In "Set Configuration Database Server" I used:
Database server: snetsqlexpress
SQL Server database name: SharePoint (I know real imaginative)
Database connection type: * Use Windows authentication
X Connect to existing configuration database.
If I try "Use SQL Authentication"
"Login failed for user <username>. The user is not associated with a trusted SQL Server connection. (Error code: 18452)"
First let me say that while I'm not a newbie, as usual I've bitten off more than I can chew comfortably. Server '03, Active Directory, IIS 6, SQLExpress, and SharePoint are all relatively new to me, hence the test bed server, and I'm on a pretty steep learning curve.
But what's life without a challenge.
So the short and sweet of it is can somebody point me in the right direction to find the root cause of this error. I do have other programs running with this instance of SQLExpress and doing so quite happily. And I've given myself god privileges in AD just to try to get around this.
View 1 Replies
View Related
Dec 5, 2007
SQL Server 2005 (9.00.3042.00)
The servers are actually a cluster in an active / passive configuration. There are 2 servers with internal IP addresses and then a virtual server. We'll call them 192.1, 192.2 and VirtualBox. If I remote desktop into VirtualBox and run the config manager, nothing will happen for about 45 seconds and then I get a dialog with this message "Connection to target machine could not be made in a timely fasion.". Other than 'fashion' is misspelled :), I'm unable to determine what could cause this. Are there issues running this on a clustered environment? Or are there some things I can look at to diagnose this issue?
View 5 Replies
View Related
Aug 3, 2007
I just installed SQL Server 2005 Express Edition and reporting services (followed the video tutorial). Whenever I try to open the Reporting Configuration Tool, it gives me the following error:
SQL Server 2005 Reporting Configuration Tool has encountered a problem and needs to close. We are sorry for the inconvience.
My only options are to Debug or Close.
I'm not sure why I am getting this error. Can anyone help?
Thanks,
Amanda
View 9 Replies
View Related
Dec 14, 2006
Hi Dear
I have been trying to add SQL database to my web application and have to configure the SQL to allow remote accee.
I would like to start the Database Engine Service when I click on start button to start the service it dissplay following message:
An error occurred while performing this operation
Severa; time I restart the computer still, When I try it is same problem.
thank for yout help.
View 3 Replies
View Related
Mar 9, 2007
I have SQL 2005, and Reporting Service has been uninstalled and reinstalled,
go through each step of confiugration until Encryption Key, for some reason,
the backup button is grayed out, only "restore" button is clickable, as well
as Delete, but we never backup the key before, so this is really strange
since we do not have backupkey, so we cannot restore.
we tried "Delete", then we got the following error:
ReportServicesConfigUI.WMIProvider.WMIProviderException: The encrypted
value for the "LogonCred" configuration setting cannot be decrypted.
(rsFailedToDecryptConfigInformation)
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.ThrowOnError(ManagementBaseObject mo)
at
ReportServicesConfigUI.WMIProvider.RSReportServerAdmin.DeleteEncryptedInformation()
Browse report manager and reportserver also got the same error, run
rskeymgmt -d, does not help either
Any suggestion?
Thanks
Don
View 10 Replies
View Related
Nov 15, 2007
Hi please Help Me Out.
I am using Data flow object in that I take OleDb as Source and Sql Server As destination. Without enabling Package configuration everything is working fine data is moving from Source to destination.
But When i apply Package Confiiguration It throw Error And My OleDb Source object Convert in to RED Color. I cant able to track This errror
Please Help me Out .
Thanks
Sandeep
View 3 Replies
View Related
Aug 12, 2007
Hi,
I've installed SQL 2005 on a Windows 2003 R2 Server, I also installed another Web Server (Another Windows 2003 R2 Server) on a different machine.
I've installed the Reporting Services on the Web Server.
When I am trying to configure the report server, I successfully created the Virtual Directories, but when trying to do the "Database Setup" step, I am getting an error on the "Create a Grants Rights Script", with this message:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.ReportingServices.Diagnostics.WebUtil.GetIPAddresses(String machine)
at ReportServicesConfigUI.Panels.DatabaseSetupPanel.IsLocalDbServer(String dbServer)
at ReportServicesConfigUI.Panels.DatabaseSetupPanel.SetDatabaseConnectionTask(String connectionString, String server, String database, ConfigurationCredentialsType credsType, String account, String password, Boolean upgrade, String dbVersion)
As a result, I cannot run the reports nor get to the folder.aspx page on the manager side of the application.
I am getting this HTML msg:
The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError) Get Online Help
When installing the Reporing Server on the SQL Server machine, it works with no problems, and I am doing everything the same.
Would appreciate your help, I've been working on this for few days with no luck.
Thank you!
Yaniv.
View 4 Replies
View Related
May 24, 2006
Hello
I've got an error when I want to initialize the Report Server by means of RS Configuration Manager.
All points are check in green except "Encryption Keys" that is in "Optionnal configuration" and "Initialization" that is in "Not Configured".
When I click on "Initialization" an error occured :
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable)
When I want to browse the report this error occured:
The report server cannot open a connection to the report server database. A connection to the database is required for all requests and processing. (rsReportServerDatabaseUnavailable) (rsRPCError). Cannot generate SSPI context.
Someone can help me ?
Thanks
Arnaud
View 3 Replies
View Related
Feb 27, 2007
RE: SQL Server 2000 €“ Enterprise Edition €“ SP4
I have an application that is utilizing cdosysmail to send email from SPs and DTS packages. It was working fine until the end of January but now they are no longer receiving the emails. Of course the logical question is what has changed. But, I am new here and cannot answer that.
Cdosysmail is working fine on other servers and I cannot find any differences between them and this server.
I have manually called sp_send_cdosysmail from query analyzer but am receiving the following error:
-----------
-2147220960
(1 row(s) affected)
Source: CDO.Message.1
Description: The "SendUsing" configuration value is invalid.
I searched the cdosysmail proc and the only command that related to the "SendUsing" property is the same on all my servers with the value of 2:
EXEC @hr = sp_OASetProperty @iMsg, Configuration.fields("http://schemas.microsoft.com/cdo/configuration/sendusing").Value','2'
Does anyone have any experience with this error?
Thanks for your help.
View 1 Replies
View Related
Mar 27, 2007
I am fairly new to SSIS packages.
I am developing an SSIS package and connecting to 3 databases (using username and password) using the connection manager, everything works fine on my development box when i execute the package from within the IDE.
When i browse to the package and execute it via the file system it comes up with Execute Package Utility and then I click execute, its comes up with SSIS Error Code DTS_E_PRODUCTLEVELTOLOW
I then added a package configuration file with the connection string in and tried to execute it again, this time selecting the the configuration file, then it comes up with the following error DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
I then went on to edit the config file and got the 1st error again DTS_E_PRODUCTLEVELTOLOW
Is there maybe something that I am missing around deploying and executing SSIS packages, my goal is to execute the SSIS package from my C# code.
Any help will be help full
Cheers
Jamie
View 3 Replies
View Related
