I've been setting up subscriptions to a merge publication for the past 3 days. All of a sudden, I'm getting a pile of very strange errors. Replication is configured. I have 16 subscribers to an existing publication configured and synchronizing changes without any issues. The script that I'm using to create all of the subscriptions is as follows:
The last one that I added #17, gives the following errors after successfully creating the subscription.
Command attempted:
{call sys.sp_MSmergesubscribedb ('true', 0) }
Error messages:
The merge process could not initialize the subscription. Ensure that the subscription registration exists at the publisher, and reregister the subscription if necessary. (Source: MSSQL_REPL, Error number: MSSQL_REPL-2147201011) Get help: http://help/MSSQL_REPL-2147201011
RegCreateKeyEx() returned error 5, 'Access is denied.' (Source: MSSQLServer, Error number: 22002) Get help: http://help/22002
Could not add article resolver 'Microsoft SQL Server Additive Conflict Resolver' information to the registry (Source: MSSQLServer, Error number: 21713) Get help: http://help/21713
Could not register article resolver: 'Microsoft SQL Server Additive Conflict Resolver'. (Source: MSSQLServer, Error number: 21715) Get help: http://help/21715
The system tables for merge replication could not be created successfully. (Source: MSSQLServer, Error number: 20008) Get help: http://help/20008
I've tried to manually create it using the GUI and get an even stranger error message as follows:
TITLE: New Subscription Wizard ------------------------------
Microsoft SQL Server Management Studio is unable to access replication components because replication is not installed on this instance of SQL Server. For information about installing replication, see the topic Installing Replication in SQL Server Books Online.
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.06&EvtSrc=Microsoft.SqlServer.Management.UI.ReplUtilitiesErrorSR&EvtID=ReplicationNotInstalled&LinkId=20476
Replication components are not installed on this server. Run SQL Server Setup again and select the option to install replication. (Microsoft SQL Server, Error: 21028)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.1399&EvtSrc=MSSQLServer&EvtID=21028&LinkId=20476
------------------------------ BUTTONS:
OK ------------------------------
I very obviously have replication installed by virtue of the fact that I have a publication and 16 subscriptions that are currently synchronizing. Any ideas?
I was developing a data-driven website but I got this error An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(I have Sql server 2005 also downloaded before) Please help me cause any website that has data can not be executed even the quick start tutorial that ships with the ASP.NET 2.0 What should I do?
Why does ado.net produce this error when I kow for a fact that there are no connections to any sql server 2005 database involved - this could and probbaly has had people off looking at the wrong connection strings in their web.configs. Note:- The connection string we have is to a sql 200 db I just wanted to make that clear. CheersGegor Error Message:An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(Boolean& useFailoverPartner, Boolean& failoverDemandDone, String host, String failoverPartner, String protocol, SqlInternalConnectionTds connHandler, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject, Boolean aliasLookup) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Web.SessionState.SqlSessionStateStore.SqlStateConnection..ctor(SqlPartitionInfo sqlPartitionInfo)
i have a form which takes in a lot of input...one of them is a date field..am passing all the values to the stored proc and inserting into a table from there...pretty simple...however when the user does not enter any value in the field...its errors out as...
I was running a DTS package which transfer a complete database, about 2.3GB in size, to another database on the same server. It was necessary for environment change from dev to QA. I baby sat the package till it was rebuilding indexes (90%) complete. This morning I have the following error message on my screen,
[Microsoft][ODBC SQL Server Driver][SQL Server] [Microsoft][ODBC SQL Server Driver][SQL Server]Location: r:SPHINXNTDBMSqueryqeexecqsxchng.inl:749 Expression: (m_cbPageMac + ulPxvarSize) <=m_pxpktdesc->m_cbPageMax SPID: 40 ProcessID: 347
I have no idea at this time what caused it. And as far as I can tell there in r drive mapped wither on the serve or my computer ( I was running the DTS package from my machine).Any help is appreciated
INSERT INTO Contact_Info (First,Last,Age) VALUES ('Alex','Strait',19)
Now it seems basic, but there in one more field that you're not supposed to specifiy a value in the SQL, its an int IDENTITY datatype field called num_id. Now this SQL works if it doesnt have the num_id field. But heres the error is gives me, I have never seen it before
Microsoft OLE DB Provider for ODBC Drivers error '80040e57'
[Microsoft][ODBC SQL Server Driver][SQL Server]String or binary data would be truncated.
hey all, i have a weird authentication error.i have two servers, both running sql server 2005. one is on my workstation the other is on my dev server. i backed up my workstation database and restored it on the dev server. my workstation is xp and my server win2k3. i'm developing an asp.net 2.0 app that talks to my sql server using windows auth. on my workstation my website runs under the ASPNET account, IUSER_COMPUTERNAME and i had that account setup in sql on my workstation in the main security folder, then again in the db security folder the name of it was [ASPNET LOGIN]. each sproc had EXEC permission for [ASPNET LOGIN].when i restored it over to my win2k3 box i deleted that login from the database and revoked it on all the sprocs. i then setup another account for the application and set my website to use that account. i couldn't use the original account because of the group it was in, blah blah blah, not important. the thing is, i got rid of all instances of that ASPNET LOGIN account and i'm running the website under a new account, and some of the stored procedures work, but some of them i get the error "Cannot find the user 'ASPNET LOGIN', because it does not exist or you do not have permission." which is crazy, because i've gotten rid of all references to that. it's not anywhere i see in the database, not in either security/users folder, it's not on any of the stored procedures. and it's NOWHERE in the website. not in IIS or code. furthermore some of the stored procedures work. as far as i can tell, the ones that are not called from my custom MemberShipProvider are working. so i went back to my database on my workstation, revoked exec permission on the sprocs, deleted the login from the db and then from the sql server instance, backed it up again, restored on my server and i'm still getting this issue.where can that ASPNET LOGIN be hiding? i restarted too thinking maybe it was cached somewhere. this is my connection string that the entire app uses: "Server=[serverName]; Database=[dbName]; Trusted_Connection=true;"my web.config is using <identity impersonate="true"/> and my website is running under the account i created.any ideas? i've been battling this for half a day.and why would it only happen with the membership provider? it's using the same connection string the rest of the app is.
Hello I have an issue with a data flow task that is reporting DBSTATUS_UNAVAILABLE. The data flow task consists of a Data Reader source which splits the rows off into 1 of 3 categories; update, insert, delete. Each destination is an OLEDB Command which respectively performs the needed operation.
The insert works fine as we just ran it yesterday and loaded 800,000 records into the table, the update is reporting the error, yet the data types match, both are nvarchar(25).
Does anyone have any idea why this might be occurring? We use this same method for all of our packages and yet this is the only one that seems to have this problem. Any help would be greatly appreciated. Thank you!
DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.CREATE PROCEDURE [dbo].[spu_Import_Export_Image](@srvr varchar(50),@db varchar(50),@usr varchar(15),@pwd varchar(50),@tbl varchar(50),@col varchar(50),@mod varchar(1),@imgpath1 varchar(1000),@pk varchar(50))ASBEGINdeclare @path varchar(50)declare @whr varchar(200)declare @fil varchar(100)declare @cmd varchar(1000)declare @imgpath varchar(800)declare @ext varchar(5)--declare @pk varchar(50)declare @KeyValue varchar(8000)declare @image varchar(50)--declare @imgpath1 varchar(1000)declare @imgpath2 varchar(1000)declare @sellist varchar(2000)set @path = 'c: extCopy.exe'select @sellist = 'DECLARE curKey CURSOR FOR SELECT ' + @pk +' FROM '+ @tbl + ' ORDER BY ' + @pkexec (@sellist)OPEN curKeyFETCH NEXT FROM curKey INTO @KeyValueWHILE (@@fetch_status = 0)BEGINset @whr = '"where '+ @pk +' = "' + @KeyValueset @fil = @imgpath1 + '' + @KeyValue --+ @extset @cmd = @path + ' /S ' + @srvr + ' /D ' + @db + ' /U ' + @usr+ ' /P ' + @pwd+ ' /T ' + @tbl + ' /C ' + @col + ' /W ' + @whr + '/F ' + @fil+ ' /' + @modexec Master..xp_cmdShell @cmdFETCH NEXT FROM curKey INTO @KeyValueENDCLOSE curKeyDEALLOCATE curKeyENDGOAbove srcipt runs fine with image data type in one table but when irun for some other table it gives me Error MessageTEXTCOPY Version 1.0DB-Library version 8.00.194SQL Server 'WSQL01' Message 170: Line 1: Incorrect syntax near '99'.(Concerning line 1)DB-Library Error 10007: General SQL Server error: Check messages fromthe SQLServer.ERROR: Could not use database 'test1'NULL-----------Aslo it only runs on server console if i run it from workstation uingsame files and tables it gives me an error again. Can anybody help meand reply me at Join Bytes! asap.thnx,dharmesh
I'm trying out the nifty new way of writing SPROCs and UDFs in CLR (C#). I have a UDF that is a bit too complicated for T-SQL so I wrote it in C# but now I can't deploy it. I run the build and it compiles fine. Then I get this error when VS2005 tries to 'deploy': ------ Deploy started: Project: Kingsmere.SQL, Configuration: Debug Any CPU ------ Deploying file: Kingsmere.SQL.dll, Path: C:Documents and SettingsEmmanuelMy DocumentsVisual Studio 2005ProjectsKingsmere.SQLobjDebugKingsmere.SQL.dll ... Error: Incorrect syntax near '&'. I don't have a single ampersand character in my UDF's .cs file. The Test.sql file doesn't have one either. There is no file, line, column number associated with the error. If I hit F1, I get help for compile time error CS0266 which is for no implicit cast available (which was the last compile error I got before compiling successfully so I think this is a red herring. In other words, online help is just displaying the last know error number - nothing to do with the deployment error). I've noticed that if I change the signature of the function from: [Microsoft.SqlServer.Server.SqlFunction] public static int ComputeGoalNodeSpread(SqlInt64 Commence, SqlInt64 Finish, SqlByte TreeLevel, out SqlInt64 PreOrder, out SqlInt64 PostOrder) to: [Microsoft.SqlServer.Server.SqlFunction] public static int ComputeGoalNodeSpread(SqlInt64 Commence, SqlInt64 Finish, SqlByte TreeLevel) The error goes away. Seems to be related to those By Reference parameters. Help!
Steps I made: 1) Created Publications by script - using Manual Sync. (Transacat Repl) 2) Created Subscriptions by script 3) Started Distribution Agent THEN THIS ERROR MSG:
'Ello there. This proc has been giving me headaches for a week now, hopefully someone here knows whats wrong with it.
CREATE PROC [dbo].[search_querry_results]( @datefrom datetime = NULL, @datetodatetime = NULL, @querry_string varchar(60), @slice int ) AS
DECLARE @querry nvarchar(2000) SET @querry = 'SELECT TOP ' + CAST(@slice AS varchar(100)) + ' * FROM FREETEXTTABLE( Exponent, *, ''' + @querry_string + ''' ) as ct JOIN Exponent AS e ON ct.[KEY] = e.[Key] WHERE date > ' + CAST( @datefrom AS varchar(30)) + ' AND date < ' + CAST(@dateto AS varchar(30)) + ' ORDER BY Rank DESC'
BEGIN IF ( @datefrom IS NOT NULL ) AND ( @dateto IS NOT NULL ) EXEC sp_executesql @querry END GO
I am running it from Query Analyzer using the following line
File ID 4 of database ID 13 cannot be shrunk as it is either being shrunk by another process or is empty.
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
*/
The commented lines is what I get in return. There's nothing being executed on this file. I dropped a few indexes. I need the space back from the file. Backups and everything are run on it normally. Is there something I'm missing or is there something wrong with it? I don't do 'AutoShrink'. Also, the file is not empty. Checkdb is working fine. Dbcc ShrinkDatabase also works fine but doesn't even recognize these files. It doesn't even show this files in the results pane when executing the command. Thank you for your help.
For some unknown reason, I'm suddenly experiencing the following error when I open a package in BIDS: Error 1 Error loading DimPromotionDemo.dtsx: The connection "" is not found. This error is thrown by Connections collection when the specific connection element is not found. c:mdwt_projectsaworders_simpleaworders_simpleaworders_simpleDimPromotionDemo.dtsx 1 1
I don't see any error icons anywhere in my package. How do I go about figuring out what's wrong?
I am trying to compile the sample program genwin.sqc, using nsqlprepwhich is used to precompile embedded sql in C. I am getting weirderrors and that is because windows.h is included in the genwin.sqcfile. I am usingSetting the lib and include path:set INCLUDE=C:Program FilesMicrosoft SQLServer80ToolsDevToolsinclude;C:Program FilesMicrosoft SQLServer80ToolsDevToolsSamplesesqlc;%include%set LIB=C:Program FilesMicrosoft SQLServer80ToolsDevToolslib;%lib%Precompiling:nsqlprep genwin /NOACCESSMicrosoft (R) Embedded SQL for C Pre-Compiler. Version 8.00.194.Copyright (c) Microsoft Corp 1993-1998. All rights reserved.Warning: genwin.sqc, line 7978: syntax error.}Warning: genwin.sqc, line 7987: syntax error.}Warning: genwin.sqc, line 71840: syntax error.__declspec void __stdcall DragAcceptFiles(HWND,BOOLWarning: genwin.sqc, line 71842: syntax error.__declspec HINSTANCE __stdcall ShellExecuteA(HWND hwndWarning: genwin.sqc, line 71843: syntax error.__declspec HINSTANCE __stdcall ShellExecuteW(HWND hwndWarning: genwin.sqc, line 71858: syntax error.__declspec INT __stdcall ShellAboutA(HWND hWndWarning: genwin.sqc, line 71859: syntax error.__declspec INT __stdcall ShellAboutW(HWND hWndWarning: genwin.sqc, line 71941: syntax error.HWNDWarning: genwin.sqc, line 71946: syntax error.As soon as i remove windows.h, the errors disappear. It seems nsqlprepdoesnt like windows.h. How do i get over this.Would really appreciate if u can help me out.versions:OS: windows 2000 server service pack 2VC++: version 6.0SQLserver 2000: 8.00.194, RTM, Standard editionThank youAmit
I have a package that has a FOREACHLOOP container. Inside the container is a SCRIPT task that runs a stored procedure and writes the output of the sp to a file.
That part works fine.
However, if I add a second script task inside the FOREACHLOOP container, I get error messages when running the second script task.
The second script task is identical to the first script task, except for the connection information. That is, it's doing the same thing, but running the sp on another server.
I tried removing the second script task from the FOREACHLOOP container, and putting it in it's own FOREACHLOOP container, but it still gives the same error.
This is the error I'm receiving:
Error 30009: Reference required to assembly 'System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' containing the implemented interface 'System.Xml.Serialization.IXmlSerializable'. Add one to your project. Line 7 Column 22 through 30
I am writing a tracking system. There is a table in the Sql Server 2000 database that contains a column for the user's ntid, the page they visited, the date of the last visit, a column each to track hits for the current year and a previous year column (basically for archiveing and reporting purposes), and 12 columns for hits per month (obviously, one per column). To record a hit, my unit determined we would only track one hit per day, so basically, there are 3 possible outcomes I needed to account for : 1) A user had never hit the page before, so I need to record the user's ID, the page they hit for the first time (since it won't exist yet), increment the year counter for that user on that page, and then determine what month column counter should be incremented as well. 2) A user had hit the page before, but not on this same day, so I need to update the row for that user on that page, changing the last visit field to reflect the current date, and icnrementing the appropriate counters. 3) A user had hit the page already on the same day, so basically, nothing should be changed whatsoever. No action should be taken. I wrote a stored procedure to attempt to accomplish that logic, and though it's probably not very pretty, I was surprised at how few errors I got on my first Syntax check. Here's the stored procedure : CREATE PROCEDURE sp_hitMe@ntid varchar(10),@page varchar(50),@thisHit datetimeASSET NOCOUNT ON DECLARE @tempDate datetimeDECLARE @yearCount intDECLARE @monthCount intDECLARE @inMonth varchar(20)DECLARE @monthColumn varchar(10)SET @inMonth = DATENAME(mm, @thisHit)SET @monthColumn = CASE WHEN @inMonth = 'January' THEN 'hitsInJan' WHEN @inMonth = 'February' THEN 'hitsInFeb' WHEN @inMonth = 'March' THEN 'hitsInMar' WHEN @inMonth = 'April' THEN 'hitsInApr' WHEN @inMonth = 'May' THEN 'hitsInMay' WHEN @inMonth = 'June' THEN 'hitsInJun' WHEN @inMonth = 'July' THEN 'hitsInJul' WHEN @inMonth = 'August' THEN 'hitsInAug' WHEN @inMonth = 'September' THEN 'hitsInSep' WHEN @inMonth = 'October' THEN 'hitsInOct' WHEN @inMonth = 'November' THEN 'hitsInNov' WHEN @inMonth = 'December' THEN 'hitsInDec' END DECLARE @insString varchar(500)DECLARE @updString varchar(500)SET @insString = 'INSERT INTO tblTracking (ntid, page, lastVisit, hitsThisYear, ' + @monthColumn + ') VALUES (' + @ntid + ', ' + @page + ', ' + @thisHit + ', 1, 1)' if exists(select * from tblTracking where ntid = @ntid and @page = page) begin if exists(select * from tblTracking where lastVisit = @thisHit) begin -- DO NOTHING! end else begin DECLARE @theColumn varchar (100) SET @theColumn = 'SELECT ' + @monthColumn + ' FROM tblTracking WHERE ntid = @ntid AND @page = page' SET @yearCount = (SELECT hitsThisYear FROM tblTracking WHERE ntid = @ntid AND @page = page) + 1 SET @monthCount = (Exec @theColumn) SET @monthCount = @monthCount + 1 SET @updString = 'UPDATE tblTracking SET lastVisit = ' + @thisHit + ', hitsThisYear = ' + @yearCount + ', ' + @monthColumn + ' = ' + @monthCount + ' WHERE ntid = @ntid AND @page = page' Exec @updString end endelse begin Exec @insString endGO And to my surprise, the only 3 errors I got were : Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 39Incorrect syntax near the keyword 'end'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 45Incorrect syntax near the keyword 'Exec'.Server: Msg 156, Level 15, State 1, Procedure sp_hitMe, Line 50Incorrect syntax near the keyword 'end'. However, these are of course so vague as to be useless to me. What's wrong with the procedure? What have I missed?
Hello,I'd like to know if I use DTS. If I use it immediately, I can see the errorin the dialog box, instead, if I use it with scheduling, where Can I checkthe error ?ThanksSaimon(Florence)
Greetings I'm learning SSIS and BIDS. I have extreme difficulty making sense of the error messages that come out.
First of all, what do the numbers mean? Each column, error, etc. is assigned a number that obviously means something yet I cannot relate them to anything. For example: The output column Name (713) on output Test (15) and Component (15) -- My table doesn't have 713 columns in it...
Then there are the error codes that obviously contain something useful. For example:
DTS Error: Microsoft.SqlServer.Dts.Runtime.TaskHost/QueueFuzzyName [33]SIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (46)" failed because error code 0xC020907D occurred, and the error row disposition on "input "OLE DB Destination Input" (46)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Where would I look up: DTS_E_INDUCEDTRANSFORMFAILUREONERROR and 0xC020907D? I understand that it tried to convert a value in something numbered 46 (no idea what that is) and the conversion failed. But that's it. How do I transmogrify 46 to something I can look at. I'm a little fuzzy on what a Destination Input is. Isn't an output a destination?
Or this one:
Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors" Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E21.
I have absolutely no idea what this means except that many things happened, one of them failed, I have an error of some sort and it's error code is 0x80040E21. It must be important, it's in there twice, but what does it mean?
I'm thinking that in the help somewhere all these error messages are listed and I can look them up, but I can't seem to find it anywhere. Am I supposed to be converting them to decimal first?
Any advice from you experts would be much appreciated.
We've had Reporting Services running in a production environ. for 6 months fine, but from Saturday every report now causes the following error (in both the Report Manager and Soap calls):
An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help
Specified argument was out of the range of valid values. Parameter name: date
Now, before you jump to conclusions - this error is occurring on reports with both parameters and no parameters (ie in reports that have no "date" parameter in the report).
The next bit of info is the weird bit...
It was working on Friday (25/March/2006) - so as a test, i switched the servers clock back to Friday - and BINGO... it worked. Then I changed it to Saturday (26th March) and it doesnt work. In fact for the next 7 days - the service will not work until April 2nd 2006 - (when I changed the systems date to the 2nd it worked again.) Moving forward, it looks like its working fine.
Does anyone have any suggestions? This is in a production environment, so obviously changing the sytsem date as a quick fix workaround wont suffice.
I'm using SqlBulkCopy. Does anyone know how I can output what row (its column names) are throwing a duplicate primary key message when I bulkCopy.WriteToServer(datatable1)?Thanks
Have this dynamic sql statement that I'm working on. It works fine outside the execute (running the query by iteself) and prints fine but when I execute it, I get errors. Spacing is good. Here is the SQL statement. set @sql = 'insert into #participantInfo (strfirstname,strlastname,strindividualfk,strusername,dtelastlogin,blninactive,fk_intrightid,imgPhoto, stre_mail,strmiddleinitial,straddress1,straddress2,strcity,fk_intlocationid,strpostalcode,strhomephone,strbusinessphone,strmiscinfo1, strmiscinfo2,strsecretquestion,dteDateOfBirth,intgender,strsecretanswer) select p.strfirstname,p.strlastname,p.strindividualfk,l.strusername,l.dtelastlogin,p.blninactive,r.fk_intrightid,p.imgPhoto, p.stre_mail,p.strmiddleinitial,p.straddress1,p.straddress2,p.strcity,p.fk_intlocationid,p.strpostalcode,p.strhomephone,p.strbusinessphone, p.strmiscinfo1,p.strmiscinfo2,l.strsecretquestion,p.dteDateOfBirth,p.intgender,l.strsecretanswer from tblparticipants p inner join tblparticipantrights r on p.strindividualfk = r.strindividualfk inner join tblparticipantlogin l on p.strindividualfk = l.strindividualfk where p.fk_strsubgroupid = ''' + @strsubgroupid + '''' exec (@sql) Error messages are: Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipants'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantrights'.Server: Msg 208, Level 16, State 1, Line 1Invalid object name 'tblparticipantlogin'. Anyone see what may be the cause? thanks ^_^
So far I have not been able to figure out how to get more info regarding the sql server errors. For example, I get this error from sql server query analyzer (this just an example):
----------- Server: Msg 128, Level 15, State 1, Line 5 The name 'does' is not permitted in this context. Only constants, expressions, or variables allowed here. Column names are not permitted. -----------
Is there a way to find more information regarding this error, or like Oracle has MeataLink, where you can search, if someone else already got this error and how it got resolved?
Or how you folks go about resolving errors you get? Is it based on trail and error, or experience (like already encountered this type before) etc.?
I was wondering if anybody knows where to get a complete list of SQL Server error messages. I am writing a stored procedure that scans SQL Server Logs for errors and if there are errors in the logs, I get paged.
How can I avoid certain messages from SQL Server being recorded into the Event viewer ? For example, every time I truncate the transaction log with 'Backup log with truncate_only', It is being recorded into the Event viewer as an Error. But, I know that it is not an error. How can I avoid this ?
I have a SS2K5 stored procedure that executes 2 others stored procedures sp_zero1 and sp_zero2 sp_zero1 and sp_zero2 do the same thing ... raises an Divide by zero error I need to (print / select into a database) both error messages using just one try catch block instead of 2 blocks like in the next example:
-- THIS IS THE WORKING CODE THAT I DONT WANT BEGIN TRY exec sp_zero1 END TRY BEGIN CATCH PRINT ERROR_MESSAGE() PRINT ERROR_PROCEDURE() END CATCH BEGIN TRY exec sp_zero2 END TRY BEGIN CATCH print ERROR_MESSAGE() print ERROR_PROCEDURE() END CATCH
if I try the next code
--THIS IS THE NON WORKING CODE BEGIN TRY exec sp_zero1 exec sp_zero2 END TRY BEGIN CATCH print ERROR_MESSAGE() print ERROR_PROCEDURE() END CATCH
only the first error message is printed and the execution is stopped
This is a generic example ... in reality I have a stored procedure that executes tens and hundreds of other stored procedures ... so thats the reason I need just one block of try catch instead of hundreds of blocks
My understanding is that in a stored procedure (or any code for thatmatter) if an error occurs you can detect it by checking @@errorvariable and raise your own error with raiserror statement.The problem is that the original error is not suppressed. For exampleI received the following output from a stored procedure from the sameerror:Server: Msg 547, Level 16, State 1, Procedure spUpdateSecurityMaster,Line 49INSERT statement conflicted with COLUMN FOREIGN KEY constraint'FK_SM_mm_Exchange_Exchanges'. The conflict occurred in database'Trading', table 'Exchanges', column 'IsoCode'.Server: Msg 50000, Level 14, State 1, ProcedurespUpdateSecurityMaster, Line 57Unable to insert into "SM_mm_Exchange" tableThe statement has been terminated.So why should we bother to use raiseerror if the orginal error isgoing to be given to the client anyways? The end result is two errormessages.
