Here's the output when I type .reload in windbg (minus warning messages):
20:266> .reload
DBGHELP: C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500armv4isqlceqp30.dll - OK
DBGENG: C:Program FilesMicrosoft Visual Studio 8SmartDevicesSDKSQL ServerMobilev3.0wce500armv4isqlceqp30.dll - Mapped image memory
SYMSRV: C:SDKsMS_SymbolFilessqlceqp30.pdb79F8C010CB11435E99474335288548601sqlceqp30.pdb not found
SYMSRV: C:SDKsMS_SymbolFilessqlceqp30.pdb79F8C010CB11435E99474335288548601sqlceqp30.pdb not found
SYMSRV: http://msdl.microsoft.com/download/symbols/sqlceqp30.pdb/79F8C010CB11435E99474335288548601/sqlceqp30.pdb not found
DBGHELP: sqlceqp30.pdb - file not found
*** ERROR: Symbol file could not be found. Defaulted to export symbols for sqlceqp30.dll -
DBGHELP: sqlceqp30 - export symbols
Why can't it find the .pdb file on the symbol server and where else should I look?
Hi, I am getting an error when i am trying to insert some value to the sql ce database
"QP is missing and it is required to evaluate default expressions. Ensure that sqlceqp30.dll is in the same directory as the storage engine (sqlcese30.dll)"
Hi All,I am trying to insert symbols in a field of a table. I am using the datatype nvarchar for the field.However when i tried to insert a statement with the symbol pi, it comes out as following:(A) 100? cm2 (B) 140? cm2 (C) 200? cm2All the pi symbol are converted to ?.Can ne 1 tell me how i can store such strings in the field.Thanks
I am creating a Project schedule using a stored procedure. The character is currently set to '>'. I would like to replace this with the 'black square', character code '25A0'. Is this possible? Here's part of my code: QBar = CASE WHEN EstStartDate >= @ZFromDate AND EstDeliveryDate <= @ZToDate THEN Replicate(' ',Datediff(day,@ZFromDate,EstStartDate)) + Replicate('>',Datediff(day,EstStartDate,EstDeliveryDate) + 1)
Hi All, I am trying to insert symbols in a field of a table.
I am using the datatype nvarchar for the field. However when i tried to insert a statement with the symbol pi, it comes out as following: (A) 100? cm2 (B) 140? cm2 (C) 200? cm2
All the pi symbol are converted to ?.
Can ne 1 tell me how i can store such strings in the field.
I started to working on a project. I dont have a lot experiences except basic information. I just want to ask can I use symbols in primary key column like 2015/1234 etc. for file numbers. These are file numbers and must be unique so i decided to make them primary keys but im not sure that i can use symbols.
I am new to SSC . I have a table that has NO.OF WORKING HOURS for 30 days. I am trying to convert all the values into INT as MINS to generate a SSRS report.
Note: There are some records with negative value (-4h15m)
I am importing csv files into sql 2000 using odbcbcp and am getting the '' symbols when there are null values. Has anyone ever seen this? Or know how I can prevent this from happening? I am required to use odbcbcp to import this data.
Please can anyone help me - I am trying to establish whether there are any reserved symbols in SQL passwords
eg % £ " $ ( / < * etc
The SQL BOL has a list of reserved words but I cannot find a list of reserved symbols.
We have a problem where by for example if the main part of the password is "test" and my user wants to add a punctuation mark into this we get "You are attempting to use an invalid character message"
Specifically
"test$" is accepted "$test" is not accepted None of "te+st" "+test" "test+" are accepted.
Has anyone else come across this and found a list of the logic that produces these results so I can point my users in the right direction?
I am going crazy trying to figure out how to do this. I have a flat file which I am massaging the data and loading into a table here is an example of a line out of the flat file:
My problem is that I have one field which is this address in a concatinated form. The fields that do not apply to this entry are suite#, floor# and other columns which are designated by the "" characters. The final concatinated addres field looks like this:
"550""""N""FAIR OAKS"""
I would like to remove the "" characters in the concatinated string. I just don't know the best way to do this? I was told DTS had a way of removing the "" from the flat file source. Since I have not used DTS extensively I am not sure if this is true. I was wondering how in SSIS I could go about removing the "" marks without removing the "" say if someone is quoted eg. John said "This is only a test". Removing the quotation marks in this instance would be changing the data. I am not sure how to do this and any help or advice is greatly appreciated!
I am developing a native C++ application using SQLCE (.NET is not a current option). Am having a problem while using multiple accessors for multiple blobs in a table. After I read the data for the first blob & try to read the data for the second one, I get an error in one of the dlls (something about using heap data that was freed). Where can I get symbol data so that I can use something like Windbg to resolve my problem.
(select count(*) from dto_initial_screening where (dto_initial_screening.facilityNo = ref_facility.facilityNo and dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'TotalScreened',
(select count(*) from dto_initial_screening where (dto_initial_screening.testResult = 'POS' and dto_initial_screening.facilityNo = ref_facility.facilityNo and dto_initial_screening.testDt between '2007-01-01' and '2008-01-01')) as 'NoOfPositives'
from dto_initial_screening left join ref_facility on dto_initial_screening.facilityNo = ref_facility.facilityNo left join ref_region on ref_facility.adrRegionCd = ref_region.regionCd
where ('NoOfPositives') < (select Cast(paramVal as UNSIGNED) from ref_param where paramCd = 'minPositives')
See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text ************** System.NullReferenceException: Object reference not set to an instance of an object. at HP.CUE.Video.PlaybackControl.UpdateProgressBar() at HP.CUE.Video.PlaybackControl._ProgressTimer_Tick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.Callback(IntPtr hWnd, Int32 msg, IntPtr idEvent, IntPtr dwTime)
************** JIT Debugging ************** To enable just in time (JIT) debugging, the config file for this application or machine (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled.
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the machine rather than being handled by this dialog.
Hello guys! I am trying to debug a sql procedure inside Server Explorer but I can seem to step into each line. When I run the procedure it doesn't stop in the breakpoint I set.
How to test @au_lname's value sends to the following following sql command? Dim MyCommand As New SqlCommand("UPDATE [authors] SET [au_lname] = @au_lname", MyConnection)MyCommand.Parameters.Add(New SqlParameter("@au_lname", SqlDbType.NVarChar)).Value = me.au_lname.text I tried to print the "MyCommand.CommandText.ToString" but only get UPDATE [authors] SET [au_lname] = @au_lname with no value in the command text. Thanks!
Our SQL Servers is giving us a headache, after a certain period in time, either SQL Service automatically shuts down by itself or hangs. I've opened the logs and found hex dumps. Can you help me out with these?
alter PROCEDURE [dbo].[spsite] @fromdate datetime, @todate datetime
AS BEGIN
select site as sitecode, count(id) as t from an where mydate >=@fromdate and mydate<=@todate, count(id) as p from an where p=1 and mydatestage1 >=@fromdate and mydatestage1<=@todate
I know there's a trick to this, that I can't figure out.
Have an SSIS package that I developed and deployed/saved(?) to a file on the SSIS server. Now I need to change the data flows. Did that, no issues, lets me resave the file, but I can't debug or execute the package so I can test what I did is right? Why is the debug drop down box greyed out? There's gotta be something I'm missing here.
Can someone help me with debugging store proc. I am usig VS 2003 and SQL Server 2005 and I have no clue as how to do that if it is possible. I would like to place a break point in my store proc if that is possible. I know if I was in VS 2005 it would be a charm but it's not my case. Thanks
hello,I want to know if it is possible to debug a stored procedure using visual studio 2003 and SQL server 2000.if yes can u help me how to do this?Thanks.
Say I have this query in my stored procedure. The problem I am facing is @OrgUID contains no value, so I put these 2 lines to debug. Am I using the right way to debug? I couldn't see the value of @OrgUID using this way. OrgUID is the PK in Organization. INSERT INTO Organization (OrgName) VALUES (@DealerName)SELECT @OrgUID = @@IDENTITYprint @OrgUIDreturn