The app users getting terminated after getting the following message.
Exception: XML document could not be created because server memory is low. Use sp_xml_removedocument to release XML documents
The SQL platform is SQL 2005 64bit version running on Windows 2003 SP2.
Was wondering if anyone else has had issues like this and if so what could be the possible resolution.
Thanks,
vkumar
If I create a memory table inside a while loop, I expect that every loop the memory table is (newly) created and thus empty.
But when I test this, I see that on the second, third, ... run the inserted data in the memory table is still present and not cleared.
This can be reproduces with the following code:
DECLARE @tbl TABLE
( [id] BIGINT )
DECLARE @tbl2 TABLE
( [value] BIGINT )
INSERT INTO @tbl
VALUES (1), (2)
[Code] ....
/*
Expectation: twice 11 and 12 in @tbl2
Actual result: three times 11 and 12
*/
SELECT *
FROM @tbl2
Is this a wrong assumption or is this a bug in SQL Server? (Tested on: SQL Server 2014 and 2008).
Hi
I did a load testing and found the following observations:
1. The Memory:Pages/sec was crossing the limit beyond 20.
2. The Target Server Memory was always greater than Total Server Memory
Seeing the above data it seems to be memory pressure. But I found that AvailableMemory was always above 200 MB. Also Buffer Cache HitRatio was close to 99.99. What could be the reason for the above behavior?
sql server 2000 is running on windows server 2003 ... 4gb of memory on server .... 2003 was allocated 2.3gb nd sql server was allocated (and using all of it) 1.6gb for total of approx 4gb based on idera monitor software ... all memory allocated betweeen the OS and sql server .... then 4 more gb of memory added for total now of 8g ... now idera monitor shows 1.7gb for OS and 1.0 gb for sql server ..... 'system' info shows 8gb memory with PAE ... so I assume that the full 8gb can now be addressed .... why are less resources being used now with more total memory .... especially sql server ..... i thought about specifying a minimum memmry for sql server but i amnot convinced that would even work since it seems that this 1gb limit is artificial .... it it used 1.6 gb before why would it not use at least that much now ??
thank you
trying to get a new database created then running a script to created the tables, relationships, indexes and insert default data. All this I'm making happen during the installation of my Windows application. I'm installing SQL 2012 Express as a prerequisite of my application and then opening a connection to that installed SQL Server using Windows Authentication.Â
E.g.: Data Source=ComputerNameSQLEXPRESS;Initial Catalog=master;Integrated Security=SSPI; Then I run a query from my code to create the database eg: "CREATE DATABASE [MyDatabaseName]".
From this point I run a script using a Batch file containing "SQLCMD....... Myscriptname.sql". In my script I have my tables being created using "Use [MyDatabaseName]   Go  CREATE TABLE [dbo].[MyTableName] .....". So question is, should I have [dbo]. as part of my Create Table T-SQL commands? Can I remove "[dbo]."? Who would be the owner of the database? If I can remove the [dbo]., should I also remove dbo. from any query string from within my code?
I have only Management Studio Express, is there a way to document my database?
View 3 Replies View RelatedCan any tell me how to simpley insert a MS word document into an SQL Server database with a field type of image.
View 3 Replies View RelatedHello,
I need to document all SQL Server Agent Jobs with full description of dependencies - database, table, stored procedure, etc.
Is there are a tool that I can download for that particular use???
Thank you so much
Does anyone know of any Windows software to scan the same paper document andenter the results to an SQL Server database?We have a Photocopier machine that can automatically scan several documentsat a time and email them to an email address. We'd like to scan in anassessment form that rates a person from 1-10 on punctuality, appearance,efficiency, willingness and professionalism, and then submit the values toan SQL 2000 database.Thanks in advance for any suggestions.Dan Williams.
View 2 Replies View RelatedCan anybody please answer this :
From SQL Server, how to generate a text document which can be read in StarOffice Writer ??
SQL Server may call another application to do it, but how ?
I have no clue -- please help.
Note: The text document should NOT be an MS Word document.
I have a file 'c:extrasiadt1.xml' the content is:
<?xml version="1.0" encoding="UTF-8"?>
<FlsAssDom_1 xmlns="http://flussi.mds.it/flsassdom_1">
<Assistenza >
<Trasmissione tipo="I"/>
<Assistito>
<IdentificativoUnivoco>XYZZYX66P17G920L</IdentificativoUnivoco>
[code]....
how to read the data to view the content like recordset (rows end columns).
I have a table where I would like to update the document number row for 3k rows. The problem I have is that the documents come in sets of two (version 1 and 2) but both have different numbers. Picture it like this below:
DOCNUM: 4445787 Version 1
DOCNUM: 4445790 Version 2
It should be the same docnum (ie 4445787 Version 1, 4445787 Version 2).
The challenge is how can we assign the new docnum for version 1 to be also for version 2 as well. Basically in SQL we need a way to
1. Find a way to distinguish the pair of documents in the target db that are the same even though they have different docnums.
2. Update them so that the docnums match.
i need to generate documents for customers to sign automatically as sales staff enter their data into SQL. These are invoice style documents. I currently have word templates of the invoice documentation, i just need to be able to add the clients names, address etc into the relevant spaces for them to print off and sign.
I am good with TSQL and writing Stored Procs etc and can easily get the data ready - i just need to find a way to populate the templates in the right places and then save a copy for emailing.
I have someone who is sending me .htm documents, with a table in them, and I was wondering if there is a way to import the data from those tables into a SQL table, probably using an SSIS Package.
View 4 Replies View RelatedHi All,[color=blue]>From last 2 weeks I am despirately trying to get the installation steps[/color]of R/3 4.7 on SQL server 2000 on Windows 2k or 2003 server. This is fora distributed environment, I mean central instance on the centralinstance host and the database instance on the on the database instancehost. I got a few response, which is highly appriciable and I respectfor those SAP gurus in order to providing me the valuable inputs. Butif some one has realy done the installation on disrtibuted environmentearlier, please forward me the document for installation. Its an urgentneed. I hope you all are understanding my position.With Regards,Mike Johns
View 3 Replies View RelatedHi!
View 10 Replies View RelatedHello all,
Over the weekend, I loaded the SQL Server SP2 on to my production database after having it on my dev server for two weeks with out any problems.
After I did this, I went to check all my SSIS packages and found them not able to load.
I get this message €œMicrosoft Visual Studio is unable to load this document: The package failed to load due to error 0xC0010014 €œOne or more error occurred. There should be more specific errors preceding this one that explains the details of the errors. This message is used as a return value from functions that encounter errors€?. This occurs when CPackage::LoadFromXML fails.
Now when I look at the errors I see:
Error 1 Error loading Master_Full_Weekly.dtsx: Error loading value "<DTS:LogProvider xmlns : DTS="www.microsoft.com/SqlServer/Dts" > <DTS : Property DTS:Name="ConfigString">SQL_TPMTSH_Datamart</DTS: Property><DTS : Property DTS:Name="DelayValidation">0</DTS: Property><DTS: Property DTS:Name="ObjectName">DTS Log Provider for SQL Serve" from node "DTS: LogProvider". D:ETLProjectsTPMTPMTSHMaster_Full_Weekly.dtsx 1 1
Does anyone know what this is about and how I can go about fixing it?
I do a clean install of SQL Server + RS + SP1 with standard setup on Windows Server 2003. I create a simple report (select * from aTable). This report (actually any report) shows the error message "For security reasons DTD is prohibited in this XML document. To enable DTD processing set the ProhibitDtd property on XmlReaderSettings to false and pass the settings into XmlReader.Create method."
This has to do with security settings in Windows Server 2003. On Windows XP everything works fine.
Any help would be greatly appreciated. Thanks!
Edit: The reports do work in the preview tab in BIDS.
We have just installed SQL and C# Express. We have lots of experience with SQL, but none with C#. With both the SQL and C# apps running; if we create a new table, view etc, we cannot see that new object from C# only the objects that existed when we opened the apps for the first time (each time).
If we close everything and re-open everything from scratch, the new objects show..!?!?
Thank you for any information on this difficult problem.
I have SQL 2008 R2 version. The server has enough disk space where the SQL is running. But the log file is not refreshed. in other words a new sql server log file does not create a new file if the old one is full.
View 4 Replies View RelatedI am looking to test this feature - and the "Transaction Performance Collector" has recommended me a table to port to In-Memory OLTP.Â
I have now tried the "Table Memory Optimization Advisor" tool.
After a couple of tweaks to the table design - the tool is now passing validation but the tool is not allowing to progress to the next step:
Could it be down to not having enough memory? But would this not show in the advisor?
Hello. I have received the follwoing error upon an attempt to Browse the Cube. All other tabs are functional, including the Calculations tab. We are running Windows Server 2003 SP2 and SQL Server 2005 SP2. Any suggestions would be greatly appreciated!
**EDIT** - Have confirmed SP1 for VS2005 is installed both locally and on server, also.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft Visual Studio)
------------------------------
Program Location:
at Microsoft.Office.Interop.Owc11.PivotView.get_FieldSets()
at Microsoft.AnalysisServices.Controls.PivotTableFontAdjustor.TransformFonts(Font font)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdatePivotTable(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.UpdateAll(Boolean translate)
at Microsoft.AnalysisServices.Browse.CubeBrowser.InitialUpdate()
at Microsoft.AnalysisServices.Browse.CubeBrowser.SupportFunctionWhichCanFail(FunctionWhichCanFail function)
I've been researching AWE to determine if we should enable this for our environment.
Currently we have a quad core box with 4 gb of RAM (VMware). OS: Windows 2003 std, SQL Server 2005 std. 3GB is not set but will be as soon as we can perform maintenance on the server.
I have read mixed feedback on AWE, either it works great or grinds you to a hault. I would assume that the grinding to a hault is due to not setting the min/max values correctly or not enabling the lock page in memory setting.
We only have one instance of SQL on the server and this box won't be used for anything else aside from hosting SQL services. We do plan on running SSRS off of this server as well.
1. Will running SSRS and enabling AWE cause me problems? Will I have to reduce the max setting by the SSRS memory usage or will it share and play nice?
2. How do I go about setting the Max value? Should it be less than the physical RAM in the box? Right now its set to the default of 214748364, even if I don't enable AWE should this default value be changed?
3. It seems that even at idle the SQL server holds a lot of memory and the page file grows. If I restart the process in the morning, memory usage in taskmon is at 600mb or so. By the end of the day, its up around 2gb. How can I track down whats causing this, should this even concern me?
4. The lock Page in memory setting worries me. Everything I've read on this seems to give a warning about serious OS and other program support degradation. In some cases to the point where they have to restore the settings on the server before they can bring it back up. What are your thoughts on this.
Hi,
Does any has a script to track how many objects created on a server on all databases with in specified date range?
Appreciate your help.
Thanks
On our SQL 2008, we'd like to receive a mail when a DB is created, and, if possible get the name of the newly created database IN the mail.
'till now get get mail I didn't find out how to get the name of the DB in the mail... should I use WMI ?
My database mail is configured and I created a WMI event alert with this query:
SELECT * FROM CREATE_DATABASE
+ Additionnal message in the options of the alert...
But I don't know how to get the name of the newly created db unfortunately.
I attached .mdf and .ldf from the app_data folder in an asp.net web site. I set the configuration to SSPI. The trouble is, I get this error
requested by the login. The login failed.
Login failed for user 'IN-XYZmattaniah'.
If I create a database and connect to it using SSPI I do not get this error. I assume there is something I am missing.
Well you would think it was pretty simple. If I create a Database on Server a last week, take a backup of that database and put it on server b today, the CRDate in sysdatabases still shows the date of last week instead of today. I need to find the actual date for all 150+ servers from sql 7 - sql 2005 in our domain. Any ideas? I had heard that maybe SQL DMO had an object that might be helpfull but I have not been able to look it up anywhere or see how to use it using sp_oa procs.
Any help would be greatly appreciated.
Hi there,
Background: I've created an application to run on windows mobile 5.0 devices. It replicates to a publication on a server. To do this it goes through ASP.net. This creates the database on the Mobile Devices.
Issue: Problem is the initial download of the database is taking 2hours plus to replicate (create) for the first time. So I'm trying to create the .sdf file on the server, zip it, and send it across to the handheld. All subsequent replications take about 5 minutes.
Question: Does anyone know how, or have examples for creating a Mobile CE database on the server. I need to create it using ASP.net and go through a pre-existing publication where a hostname used for filtering.
http://msdn2.microsoft.com/en-us/library/ms173009.aspx explains how to create this in SQL Server Management Stuidio. How do you do the same thing over ASP?
Can this be done using SMO? How do you create a SQLServerCompactEdition database using normal .NET Framework? Thanks for your help!!
I have a Windows sever 2012 with sql server 2012 enterprise. Ram size is 22GB. Sometimes SQL sever takes 95% memory.My question, How to reduce memory size without killing any process because it's production server.So there are many background process is running. And,Is there any guides to learn why Memory is raise d so high and how to reduce it.
View 10 Replies View RelatedHi allI have a question concerning sql database mdf files. In the old days I would user a ms access database. This file would be stored with the actual web files and would utilise a dsn connection. I have noted when designing with vwd 2005 express it allows you to use 2 methods of creating a mdf database. You can either create it as an attachment mdf or you can create it directly using sql manager. My question is, if you create the mdf database as an attachement file can you store it in the same manner as if you where using a ms access database, meaning can you store it with the web site's files so it uses the file storage allocated size and then create a connection similar to a dsn (but for sql) to the isp's sql engine or does it have to be uploaded to the isp' s sql server.The reason for this question is some of my customers do not want to pay the extra cost to have an sql allocation, however I do not want to go back to using old asp methods to create advanced sites as I prefer using stored procedures. Any help will be appreciated
View 4 Replies View RelatedI am a new SQL Server developer using Visual Basic 6 Professional Edition. I am using ADO and SQLDMO to develop my application. The SQL Server is Version 7.0, SP2 and SP3 (two different servers).
I am having difficulty gaining access, using ADO, to databases I create using SQLDMO. I create the database, create the DBFILE object, create a login and attach it to the database, create a user, assign the created login to the user,
and assign the created user to the 'db_datareader', 'db_datawriter' and 'public' roles. the login object was set to 'standard', not NT. the SQL Server is set to 'mixed' NT -SQL Server login mode. Thw SQL Server is running under the 'system account'. Using SQL Server Enterprise Manager, everything looks OK. An attemp to connect using the ADO connection object fails, giving an error of Login failed for user 'engbom3admin'.
Connecting to the SQL Server using SQLDMO uses the 'sa' user name with a blank password.
I can successfully connect to the created database using the ADO connection object using the 'sa' user name and blank password. Using the SQL Server Enterprise manager, I cannot see anything at all different between the 'sa' and my created 'engbom3admin' user. I've manually set the created user to have 'db_owner' roles, etc. Same result. I'm stumped. I've read all I can gather from the Microsoft SQL Server books. I'm still stumped.
I would greatly appreciate any help, information or tips you could provide. Thank you in advance.
Sincerely,
Bob Wohlers
SVP, IS Datamax Corporation
Hi,
Instead of runing a report through the schedule that I have created, I am invoking the SQL Agent Job that has been created for the schedule of the report, using the system stored procedure sp_startjob. Is this a recommended approach? Are there drawbacks for this approach?
Subash
[URL] Following instructions from the above URL I have executed the script on master database (Source: SQL Server 2005). Later a new stored procedure is created in master database, executed Exec sp_help_revlogin, copied the output and executed the same on required instance (Destination: SQL Server 2008R2).
All the logins are successfully created but when I checked despite what the permissions these logins have in the source server all logins are created with public roles. Is it an expected behaviour with revlogins hence do we need to manually assign its role and map to its respective databases or am I missing anything in creating these logins.