Does anyone know of a way to make BULK INSERT or bcp ignore blank lines in the file? I am having trouble with a bunch of data files coming back with 1 or 2 blank lines at the end, and it causes the entire bcp to fail.
I suppose I could write a utility to trim the files but that seems a bit overkill. Any thoughts?
I am trying to bcp import a text file into a SQL Server 2000 database.The text file is coming out of a java application where orderinformation is written to the text file. Each record is on it's ownrow, so the last item in each record has a new line character at theend of it to create the next row. This works well in creating the filehowever bcp does not like to import this text file with the extra blankline at the end. If I change the new line character to the beginning ofthe records then there is a blank line at the top of the text file,which bcp also does not like. Does anyone have any suggestions for meto get around this issue?Thanks,
I am working on conversion of Crystal reports to SSRS. The existing report has two level of grouping. So I have included 2 list inside a third list and then done the grouping. Is there another way to do multiple grouping ? Every thing is working fine except for getting one extra blank page at the end of report with only header and footer. I have properly checked the body height and width and page margins. It has something to do with list but i cant figure out what.
I have used the following useful article regarding exporting a multi-record file: http://vsteamsystemcentral.com/cs21/blogs/steve_fibich/archive/2007/09/25/multi-record-formated-flat-file-with-ssis.aspx
I have created the 9 datasources, ordering each on a field commmon to all.
I have created the required derived columns headers and have merged all the record types into a file.
The resulting file looks fine, except for the odd blank line between record types. Any ideas regarding cause and what to do to fix?
I'm just learning SSIS and I've hit my first bump. I am doing a bulk import from a tab delimited text file to an empty sql table that has a Idendity column defined. How do I tell the bulk insert task to skip that column when inserting from the text file. If I remove the identity column it imports the data fine, but I want to create the indentity column in the table too.
hello friends my one insert code lines is below :) what does int32 mean ? AND WHAT IS DIFFERENT BETWEEN ONE CODE LINES AND SECOND CODE LINES :)Dim conn As New SqlConnection(ConfigurationManager.ConnectionStrings("ConnectionString").ConnectionString) Dim cmd As New SqlCommand("Insert into table1 (UserId) VALUES (@UserId)", conn) 'you should use sproc instead cmd.Parameters.AddWithValue("@UserId", textbox1.text) 'your value Try conn.Open()Dim rows As Int32 = cmd.ExecuteNonQuery() conn.Close()Trace.Write(String.Format("You have {0} rows inserted successfully!", rows.ToString())) Catch sex As SqlExceptionThrow sex Finally If conn.State <> Data.ConnectionState.Closed Then conn.Close() End If End Try MY SECOND INSERT CODE LINES IS BELOWDim SglDataSource2, yeni As New SqlDataSource() SglDataSource2.ConnectionString = ConfigurationManager.ConnectionStrings("ConnectionString").ToString SglDataSource2.InsertCommandType = SqlDataSourceCommandType.Text SglDataSource2.InsertCommand = "INSERT INTO urunlistesi2 (kategori1) VALUES (@kategori1)" SglDataSource2.InsertParameters.Add("kategori1", kategoril1.Text)Dim rowsaffected As Integer = 0 Try rowsaffected = SglDataSource2.Insert()Catch ex As Exception Server.Transfer("yardim.aspx") Finally SglDataSource2 = Nothing End Try If rowsaffected <> 1 ThenServer.Transfer("yardim.aspx") ElseServer.Transfer("urunsat.aspx") End If
I have to update a field within a table of 60 records or so. Each record has a different field value. it's type varchar. i was given an excel file with the field values and was thinking of a bulk update like bulk insert, but i don't recall that it's possible that way.
Is the only way to create a table, bulk insert, then merge the two tables together with UPDATE?
Just wanted to see if there was an easier way to do it, otherwise i'll take the latter route. Thanks!
I have a table containing 8 million records. I need to replace 2 million of these records with a scaled down query that goes something like: SELECT 1, ShareholderID, Assets1 FROM MyTable (Yields appx. 200,000 recods) SELECT 2, ShareholderID, Assets2 FROM MyTable (Yields appx. 200,000 recods) . . . SELECT 10, ShareholderID, Assets1 + Assest2 + Assets3 + ... + Assets9 FROM MyTable (Yields appx. 200,000 recods)
Updates and cursors just seem to be too slow.
So far I have done the following, but was wondering if anyone could think of a better way. SELECT 6 million records that don't need to be deleted into a #TempTable Use statements above to select into same #TempTable DROP and recreate Original Table SELECT 6 + 2 million records INTO original table.
This seems rather convoluted. Is there a better approach? Would it be worth while to dump data to a file and use bcp / Bulk Insert
I have a file with about 600,000 lines of insert statement given to me by a developer. There are basically 5 inserts into different tables for each Product or Item. Each Insert MUST run in the order specified and must complete before the next insert runs,
To complicate things further, there are triggers that fire on every insert and each trigger must complete its transaction before the next insert starts.
What is the best and most efficient way to run the inserts, while ensuring that each statement completes before the next.
Tried using Serialization but appears some of the transactions overlap and generate errors. Tried disabling the triggers but run into other problems.
At this point I am tempted to run each statement manually
<p>Hi , I would like to know anyway to insert two strings into a row with 2 lines created?My codes are as below If NodeName = "subProductPrice" Then If xmlrder.NodeType = Xml.XmlNodeType.Text Then SubPrPriceList.Add(xmlrder.Value) For i = 0 To SubPrPriceList.Count - 1 SubPrPrice = CStr(SubPrPriceList.Item(i)) PriceBrkDownStr &= SubPrPrice Next PricePerDay = SvcDate & PriceBrkDownStr dr("dailyPrice") = PricePerDay End If End If Although both the SvcDate and PriceBrkDownStr are inserted into the same row but they are displayed into one line such as below: <u>dailyPrice </u>02/03/2007 03/03/2007 120 230 Any idea how to make the date and price separate into two rows in the same table grid row? thanks =)</p>
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages: BULK INSERT TableName FROM 'C:DataDbTableName.bcp' WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following: DataFileType: DTSBulkInsert_DataFileType_WideNative RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help. Paul
I'm trying to use Bulk insert for the first time and getting the following error. I think it might have something to do with my Format File and from the error msg there's a conversion error for the first column. In my database the Field is nvarchar(6) so my best guess is to use SQLNChar for the first column. I've checked the end of each line is CR LF therefore the is correct for line 7 right?
Msg 4863, Level 16, State 1, Line 1 Bulk load data conversion error (truncation) for row 1, column 1 (ASXCode). Msg 7399, Level 16, State 1, Line 1 The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error. Msg 7330, Level 16, State 2, Line 1 Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".
BULK INSERTtbl_ASX_Data_temp FROM 'M:DataASXImportTest.txt' WITH (FORMATFILE='M:DataASXSQLFormatImport.Fmt')
Before implementing memory based bulk copy insert with IRowsetFastLoad interface of SQL Server 2005 OLE DB provider, I want to know some considerations.
- performance : compared with T-SQL's "BULK INSERT ..." and bcp utility
- SQL Server's resource usage : when running memory based bulk copy, server resource's influence
- server side action(behavior) : when server is busy, delayed-update means IRowsetFastLoad::Commit(true) method can insert right after?
- row-count : The rowcount limitation can be inserted by IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit
I have a web form with a text field that needs to take in as much as the user decides to type and insert it into an nvarchar(max) field in the database behind. I've tried using the new .write() method in my update statement, but it cuts off the text after a while. Is there a way to insert/update in SQL 2005 this without resorting to Bulk Insert? It bloats the transaction log and turning the logging off requires a call to sp_dboptions (or a straight-up ALTER DATABASE), which I'd like to avoid if I can.
Does anyone know the trick when inserting an empty variable into a MSSQL table for it to show as null and not a blank or a zero? It is a php variable. Thanks
Data from as400 imports into SQL with blank fields which is the way as400 outputs records. How can you insert previous record of data null or blank field. ex:
Hello, I am wondering is the Transaction Log logged differently between BULK INSERT vs INSERT? Performance speaking, which operations is generally faster given the same amout of data inserted.
Hi~, I have 3 questions about memory based bulk copy.
1. What is the limitation count of IRowsetFastLoad::InsertRow() method before IRowsetFastLoad::Commit(true)? For example, how much insert row at below sample?(the max value of nCount) for(i=0 ; i<nCount ; i++) { pIFastLoad->InsertRow(hAccessor, (void*)(&BulkData)); }
2. In above code sample, isn't there method of inserting prepared array at once directly(BulkData array, not for loop)
3. In OLE DB memory based bulk copy, what is the equivalent of below's T-SQL bulk copy option ? BULK INSERT database_name.schema_name.table_name FROM 'data_file' WITH (ROWS_PER_BATCH = rows_per_batch, TABLOCK);
------------------------------------------------------- My solution is like this. Is it correct?
// CoCreateInstance(...); // Data source // Create session
I have two SSIS packages that import from the same flat file into the same SQL 2005 table. I have one flat file connection (to a comma delimited file) and one OLE DB connection (to a SQL 2005 Database). Both packages use these same two Connection Managers. The SQL table allows NULL values for all fields. The flat file has "empty values" (i.e., ,"", ) for certain columns.
The first package uses the Data Flow Task with the "Keep nulls" property of the OLE DB Destination Editor unchecked. The columns in the source and destination are identically named thus the mapping is automatically assigned and is mapped based on ordinal position (which is equivalent to the mapping using Bulk Insert). When this task is executed no null values are inserted into the SQL table for the "empty values" from the flat file. Empty string values are inserted instead of NULL.
The second package uses the Bulk Insert Task with the "KeepNulls" property for the task (shown in the Properties pane when the task in selected in the Control Flow window) set to "False". When the task is executed NULL values are inserted into the SQL table for the "empty values" from the flat file.
So using the Data Flow Task " " (i.e., blank) is inserted. Using the Bulk Insert Task NULL is inserted (i.e., nothing is inserted, the field is skipped, the value for the record is omitted).
I want to have the exact same behavior on my data in the Bulk Insert Task as I do with the Data Flow Task.
Using the Bulk Insert Task, what must I do to have the Empty String values inserted into the SQL table where there is an "empty value" in the flat file? Why & how does this occur automatically in the Data Flow Task?
From a SQL Profile Trace comparison of the two methods I do not see where the syntax of the insert command nor the statements for the preceeding captured steps has dictated this change in the behavior of the inserted "" value for the recordset. Please help me understand what is going on here and how to accomplish this using the Bulk Insert Task.
hi friends i am trying for bulk insert using SQL server 2000using this codebulk insert xyzfrom 'D:authors.txt'WITH (FIELDTERMINATOR = ',') but it gve me error saying thatCould not bulk insert because file 'D:authors.txt' could not be opened. Operating system error code 21(error not found). i check file securityit has given full control to the file can any one give me idea about Operating System error code 21(error not found) thanks
Hi,I've a SP that insert records in one table and then call another insert SP on a second table. The first table is like a master table and the second is like a child table. After inserting the right record in the master table, I've to insert some record in the child table. This records differ each other only by two of about ten field, so what I'd want is not to call the second SP X times, but only one time.. Is it possible??ExampleTable1: Id (identity), Desc;Table2: Id (identity), Id_table1, Id_TableX, Num, Field1, Field2, ... Field10.In Table2 only Id_TableX and Num change every time... the other are all the same (for one record in Table1). How can I do? Probably with a bulk insert and a bulk update?? But, can I make a bulk xxx without a file??
hi friends i am using bulk insert cmd using my table name but i am facing error.....SO IS IT POSSIBLE TO USE BULK INSERT WITH TEMPRARY TABLE VARIABLE PLZ HELP ME
I want to move data from a text file to a SQL table. After DTS creates the table, does it use Bulk Insert to copy the data from the file to the table, or BCP?